I am trying to install Fedora 11 from the full DVD iso on a system using an Intel D945GNT motherboard with a dual-core 3.2GHz Pentium D installed. The installation hangs quite quickly and produces the error "Kernel panic - not syncing"... The previous line is something along the lines of "EIP: [something] intel_i915_configure() [something else]". I have tried many different kernel boot options, such as acpi=off, nolapic, nommconf, and the like, but to no avail. It seems as though this has something to do with a memory mapping conflict due to the allocation of video memory for the on-board graphics chip, but I'm not at all certain about that.
i study computational systems engineering.. and in my school (itlp) we've got fedora 12 installed in some of the computers.. and we use it to learn network administration and security. the reason of this message.. is that i want to install fedora 12 in my notebook (dv4-1525la vu068la).. but an error keeps poping up.. the error is the next one..
DMAR: No ATSR found DRDH: handling fault status reg f0003d63 Kernel panic - not syncing: DMAR hardware is malfunctioning
and though i have looked in bugzilla.. there is no help for me there.. they say.. "press tab in the welcome bootscreen when you are about to select whether to install or restore an existing system and write intel_iommu=off and press enter" but that does not really helps.. it just does the same.. in some blogs they say "upgrade your bios".. but i say.. then why i can not install the olders distributions with my "old" bios.
I tried to upgrade Empathy from 2.28 to 2.30 via Synaptic but the upgrade always failed as there were some errors to do with the dependencies (libglib2.0* and others). The dependency issues were odd as it told me that Empathy wanted to install files that were older than the existing ones. So I decided to uninstall Empathy and all its dependencies, and re-install the whole (updated) package and it's dependencies from scratch via Synaptic. After the install, Ubuntu told me that there were broken packages and Update Manager kept on popping up asking me to run a partial upgrade to fix these broken packages. Well, the partial upgrade also failed (due to the same dependency issues , I suspect) so I decided that I'll run a full system update (as Update Manager had being bugging me prior to my failed Empathy upgrade). 486 Mb later, Ubuntu no longer wants to boot - it freezes on the splash screen.
When I start it in recovery mode, it spews out the various processes being loaded. Trying to run earlier kernels (2.6.31-19 / 17 / 14) from GRUB, in both normal mode and recovery mode does not seem to help.I am running Ubuntu 9.10, kernel 2.6.31-20-generic.
a) Is the problem to do with the kernel - did the update try to update the kernel as I note that there is a new stable release (2.6.33-2)? However, GRUB still indicates that the kernel is 2.6.31-20. b) Would updating the kernel to 2.6.33-2 help? If so, how do I do this? c) Is the problem, as I suspect, to do with the libglib* files? If so, how do I fix it?
Today I was upgrading my netbook with Ubuntu 10.10 on it to 11.04 via the Update Manager. I got a few errors and the Update Manager seemed like it wasn't continuing, so decided to exit it. It didn't respond so after a while I decided to restart the netbook. However the on/off/standby/restart, etc. button in the top right wasn't responding either, so I decided to force a shutdown with the power button on my netbook. Now Ubuntu doesn't start up, and gives me an error along the lines of:
Kernel panic - not syncing: Attempted to kill init! Pid: 1, comm: init Not tainted 2.6.35-28-generic #50-Ubuntu Now could I in some way repair my Ubuntu installation while still keeping the files I already have on my computer? Maybe via booting from a flash drive or something...?
I've been using Linux for a few years, but this is my first time using Fedora. I installed it on an old computer last night and rebooted, and everything seemed good. I let it start to install updates, but after they were about half done I stopped it, turned the computer off, and went to bed. I know that was stupid of me, and I'm afraid it screwed something up because now when I boot I get the error "kernel panic-not syncing VFS:unable to mount root fs on unknown-block(0,0)".
When I looked up the error on Google it seems a lot of people get this after installing a kernel incorrectly, so could stopping the update in the middle perhaps screwed with my kernel? Could I simply chroot into the installation from the live CD and run 'yum install kernel26'?
I was able to copy the iso file and tried the installation however I stubbled upon the same problem I had when I tried installing Fedora 11. The message I received was "(1) (0.048001) MP-BIOS bug:8254 timer not connected to IO-APIC (2) (0.064001) Kernel panic-not syncing:IO-APIC + timer doesn't work Book with apic debug and send a report. Then try booting with the 'no apic-option'.
I had FC10 working nicely but decided to move to FC12 to be able to use the latest and greatest... Turning out to be nightmare!
My HDD is partitioned into three:
(hd0, 0) 100MB : used to be original /boot for FC 10 (hd0, 1) 120GB : /home (hd0, 2) 30GB : / > First thing tried: preupgrade
Using this preupgrade setup happend and asked to reboot. However, upton reboot got locked in stage2. So this option was abondoned.
> Second thing tried: installation CDs
Using this method formatted (hd0,2) and installed FC12 on (hd0,2). However, did not change anything on (hd0,0). This still held all the upgrade information from the previous trial. Now, when I rebooted after the install there was a kernel panic with error "kernel panic not syncing vfs". Thinking it might due to the (hd0,0) partition and errors in my install, I abandoned this.
> Third thing tried: installation CDs
Using this method I formatted both (hd0,0) and (hd0,2). The install was similar to above but now (hd0,0) was also formatted and after install was empty. But upton reboot I still got the "kernel panic not syncing vfs" message. I dug through google and saw references to problems in grub.conf and lo behold there were problems with my grub.conf. I don't see the initrd line at all nor do I see the initrd*.img file in my disk. The grub.conf is:
I am running FC13 on a fairly old PC (PIII 500MHz, 384MB RAM, 10GB SCSI disk). It works fine using kernel 22.214.171.124-112.fc13.i686.PAE. After a series of recent updates the system now also has a new kernel 126.96.36.199-56.fc13.i686.PAE.
/boot/conf/grub.conf contains: # grub.conf generated by anaconda # # Note that you do not have to rerun grub after making changes to this file # NOTICE: You have a /boot partition. This means that # all kernel and initrd paths are relative to /boot/, eg. # root (hd0,0) code....
When I try and boot to the newer kernel I get an error like:
Kernel panic - not syncing VFS Unable to mount root fs on unknown block(0,0)
I read on the forum about a similar problem where the fix was to insert the line
but this file doesn't exist and so the boot then hangs with no messages, so I took this line out again. Here is contents of /boot:
$ ls -l total 21148 -rw-r--r--. 1 root root 111391 May 27 04:06 config-188.8.131.52-112.fc13.i686.PAE -rw-r--r--. 1 root root 112291 Sep 15 04:32 config-184.108.40.206-56.fc13.i686.PAE drwxr-xr-x. 3 root root 1024 Jan 23 2010 efi code....
As you may deduce from the above I haven't used the system much so the auto-update hasn't run for several months.
Any help on running / installing the newer kernel appreciated. Note that I am trying to install a wireless LAN card and am following instructions here: url
I got as far as
cd /lib/modules/`uname -r` ls -l
[root@localhost 220.127.116.11-112.fc13.i686.PAE]# ls -l total 3300 lrwxrwxrwx. 1 root root 51 Jun 3 00:52 build -> ../../../usr/src/kernels/18.104.22.168-112.fc13.i686.PAE drwxr-xr-x. 2 root root 4096 May 27 04:08 extra drwxr-xr-x. 11 root root 4096 Jun 3 00:52 kernel code.....
so I have the src files for the newer kernel not the one I am running. I thought it best to stop and think (and ask for help!) rather than break a working machine (but with no wireless LAN!)
I have upgraded from 10.4 to 10.10, and when I restart I get the error "kernel panic - not syncing: VFS: unable to mount root fs on unknown block".I've done some googling and found this is a pretty common problem, but no existing solutions have worked for me.Right now I am using the 10.4 live CD.
I have a Compaq Presario 8000 with an Nvidia Geforce FX 5950 Ultra on which a year ago I upgraded from Fedora 6 to Fedora 9, and this broke the Nvidia driver, since Fedora 9 was shipped with an X server incompatible with Nvidia. I went back to the 2d driver to get X working, and it sat that way for the past year. But recently I wanted to do some 3D work and decided to install Fedora 12, which hopefully has an X server that works with Nvidia.
I decided to do a cold install, re-partitioning my 80G hard drive at the same time. I backed up my data, ran the install CDs with no errors, and booted the system, with an immediate kernel panic: Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
Doing a Google search, I found over 8,000 hits for that message combined with the keyword Fedora. Several of the hits were on Bugzilla: [URL] I then booted the install disk, chose rescue mode and did - chroot /mnt/sysimage
I am trying to install debian on my windows PC but am receiving some errors with it. I have downloaded "debian-506-amd64-DVD-1.iso" from debian website and am seeing that the md5 sum is correct. I am getting following error when I choose Graphical Install or install.
[ 1.480788] crc error [ 1.569788] kernel panic -not syncing:VFS: Unable to mount root fs on unknown block(253, 52)
Description of my PC: I have 2 hard disks
1. IDE hard disk (80 GB) -> windows is on this drive 2. SATA hard disk(250GB) -> I intend to install debian on this drive. 3. MSI motherboard & AMD 64 processor with 1 GB RAM. 4. NVidia external graphics card based on AGP slot(256 MB)
EDIT:: This time I got one more error message prior to the 2 shown above [some number] PCI:Cannot allocate resource region 0 of device 0000:00:00.0
I started installing the beta of Maverick a few days ago, but the update server was running inordinately slow, so I canceled it. Several times, I have attempted to continue the installation, but I've been unable to reach the server. Shortly after this happened, I could no longer boot normally--I get the error:
Code: Kernel Panic - not syncing:VFS:Unable to mount root fs on unknown-block(0,0) Choosing the previous kernel fixes the problem.
So, I obviously want to upgrade to the release version now. When I open the update manager, I get asked if I want to do a partial upgrade to complete the install. I'm a bit leery of doing this since I only have one previous kernel to go back to (my list got really long and I have another operating system entry underneath, so I set my automagic boot manager to only keep two), and if I can no longer boot after the upgrade, I'll have to use Windows until it gets fixed... So, should I finish the upgrade, try to troubleshoot the error, or do something else to jump right to the latest release, after being partway through the upgrade?
In my internal disk i had installed 10.04 and 10.10. 2 days ago after a restart my system did not boot and i got the message: kernel panic:not syncing VFS unable to mount root fs on unknown block(0,0).
For 2 days i tried to solve the problem without success and today i installed 10.04 in the entire internal disk but the problem(message above mentioned) remains.
the result of the sudo fdisk -l command is this
ubuntu@ubuntu:~$ sudo fdisk -l Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes
sdb is my external hard drive in whick i also had 10.04 installed but never used it.
I recently upgraded from FC7 to FC10 (Also, the Kernel from 22.214.171.124 to 126.96.36.199).I did the upgrade through Yum (First installed the fc10 rpms, then did yum upgrade).Now the new Kernel won't boot.These are the options in GRUB for the new Kernel
I recently started to use Ubuntu in VWware player on my windows-XP. I installed ubuntu 10.04 few days ago, It was working fine.
Yesterday, I compile a new kernel, kernel 2.6.33 in my vmware ubuntu 10.04. Everything went well till I did reboot. before reboot I use the command "update-grub" to make it compatible to the new kernel. BUT... after rebooting, I have a problem in loading a grub correctly. it gives me following message " [2.149136 ]kernel panic - not syncing: VFS: unable to mount root fs on unknown-block(0,0)" and I can not proceed further. I have my all data on it. I also tried to boot it from live CD but unfortunately, I can't mount the hard disk on it in order to get those data from my old Ubuntu set up.
I need to recover some data of the 'home' directory after kernel panic.I was upgrading ubuntu 11.04, [COLOR=blue !important][COLOR=blue !important]installed[/COLOR][/COLOR] on usb.Failed to upgrade because the main partition had no more space. I moved one directory of about 100Mb to other partition, but it seemed that in the main partition didn't appear those 100Mb free. i restarted the computer expecting those 100Mb free. And kernel panic.
[ 0.789567] Kernel panic - not syncing: VFS: Unable to mount root fs on unknow-block(8,1) [ 0.789646] Pid: 1, comm: swapper Not tainted 2.6.35-22-generic #33-Ubuntu [ 0.789716] [<c05c6468>] ? printk+0x2d/0x35
I have a system here that tends to have kernel panics during an linux installation, though I was able to perform a vista installation on the same hardware. Now I would like to ask what your suggestion for the cause of that problem is. Here a screenshot: [URL]
I suspect the hd to cause it: -it is now over 7 years old -smartctl displays over 16k read error and 0.5mio seek errors (or are such high numbers normalfor that old disks?) -the panic contains the string bad_area in the trace
But it might also be a RAM error, since the trace contains sth about page_fault and vista installs on the very same hdd and does not report any error messages (concerning the hardware, and I heard win doesn't complain about a bad RAM).
I downloaded the ubuntu-9.10-desktop-i386.iso file from the website, extracted it, and ran the Wbiu.exe file - it prompted to get my info and then restart. Upon restarting, I then had the choice to run Windows or Ubuntu, and I've been running Ubuntu ever since.
I ran into some speed-bumps. Upon entering the Ubuntu option at my start-up prompt, I go to another prompt asking me to choose from: Ubuntu, linux 2.6.31-20 Generic Ubuntu, linux 188.8.131.52 Recovery mode Ubuntu, linux 2.6.31-14 Generic Ubuntu, linux 2.6.31-14 Recovery mode Windows 7 installer Windows Vista installer I've been choosing the very first one, the 31-20 generic, but just this morning after downloading some programs from the Synaptic and transferring a few Gbs of music, I received this error prompt: Code: [2.879604] Kernel panic -- not syncing: VFS : Unable to mount roof fs on unknown--block (8,2) After that, I've been running the 2.6.31-14 generic installer. I have no idea what any of this means and I've spent time crawling through threads trying to figure it out. I mean, it still WORKS but I just help but think I've done something very wrong. ALERT: SUDO PASSWORD QUESTION
I hope the cautionary sign above has dispelled any annoyed gurus who have answered this question dozens of times before. I've crawled through my fair share of threads concerning this, the best corollary being the following: forum/linux-newbie/157773-solved-sudo-password-errors-usb-internet-issues.html; which, strangely enough, was never really solved. Like the user in that thread, when I access the terminal and type in a command, the next line invariably states "[sudo] password for jacob' -- when I hit enter and type in the long list of possibilities I've read (read: sudo, su, su root, su passwd, sudo passwd, sudo root, et al.), alas, nothing happens but the same statement.
i am just learning about computers and know nothing at all except how to turn it on. i just booted up linux and recieved message:  Kernel Panic - not syncing: VFS: Unable to mount root fs on unknown - block (8,1)
I boot from CD (Tried both debian-506-i386 and the Netinstall) I also tried the flags acpi=off noapic nolapic And when it starts booting the install, it appears: "Kernel panic- not syncing: attempted to kill init"
I just installed the DVD iso of Fedora 13...and did a "sudo yum update" after the installation got finished. After 3 hours of waiting, I restarted. I was greeted by Fedora with a kernel panic, right after it boots up.
Here's the message:
Kernel Panic - not syncing: VFS unable to mount root fs on unknown-block (0,0)
EDIT: Here's the content of grub.conf
# grub.conf generated by anaconda # # Note that you do not have to rerun grub after making changes to this file # NOTICE: You have a /boot partition. This means that
What is peculiar on this grub.conf, is that the 184.108.40.206-147 boot conf is missing an initrd line...I looked in the /boot directory...and I found out that the initramfs file that matches the 220.127.116.11-147 kernel is also missing (i.e initramfs-18.104.22.168-147.fc13.i686.PAE.img).
My Fedora 14 box is no longer starting. I am getting a message at startup - "Kernel panic - not syncing:
VFS: Unable to mount root fs on unknown-block(0,0)".
Unfortunately, I don't know what I did before I got the message. I mean, I have made various installations, including some kernel drivers (such as a wifi card and a sound card). Also I did need to update the kernel-devel package as a requirement for some install or other. I know that is not very helpful, but let's get to the important bit...
What does the message "Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)" mean? What has broken?
And how does on recover from it? I have been reading around, and of course I am able to boot the machine from a live CD, but I am not sure what I should do with grub.conf, what I should rebuild, how to do it and so on.
I have trawled through an extensive number of post on quite a few forums without even a step forward with this.
I have a fedora 13_x64 system with software raid1 for /boot and / (md0 and md1 respectively) , swap is not raided.
I was doing an yum update through the software updater in gnome and the system froze.
I had to press reset to get any response from the machine.
Since then I have been getting the kernel panic above just after grub starts fedora.
I tried the previous kernel from the previous update and it has the same error.
At the worst I am prepared to load OS again but there is still some info and configs that I would like to access from the raid partitions before I go ahead. Is there any way to access these partitions through a live CD or rescue environment?
Is there a method to bring this install back to life? or am I looking at a reinstall?
Kernel Panic. I am using "HP Pavilion dvb 111x" "AMD Turion X2" "ATI RADEON Graphic Card" And "RHEL5"
I am not register user of Redhat. I am trying to switch kernel form linux-2.6.18.X To linux-22.214.171.124. I had download source of kernel and install it as per README file. During installation everything was fair but as I am trying to boot from my new kernel it shows me "Kernel Panic" error. It Displays
" ide_generic :I/O resorce 0x1F0-0x1F7 not free. ide_generic :I/O resorce 0x170-0x177 not free. Redhat nash version 126.96.36.199 starting. mount : Could not find filesystem. '/dev/root' setuproot : mounting /dev failed : no such file or directory setuproot : mounting /proc failed : no such file or directory setuproot : mounting /sys failed : no such file or directory switchroot : mount failed : no such file or directory
Kernel Panic not Synching: attempt to kill init! "