I can not for the life of me get the instaltion started on this computer I have made a seperate partition on the hard disk. But every time I go to install Fendora to the computer it says there is not enough disk space. Ive tired to the srink current system option and it gives me an error. Is there something in the format of the partition that is wrong? At this point I am lost. I will answer all question about the system I not sure what info you guys need. The current OS on the laptop is windows 7.
New member here. Was introduced to Ubuntu by the IT guy at my last place of work and liked it so much, I ran WUBI on my laptop for a couple of months before taking the plunge and today fully converting my Compaq Presario CQ56 Laptop to the full Ubuntu OS.
The only issue I have is I have no sound whatsoever. I have seen some suggestions where you should check the hardware drivers and when I do that the only driver that appears is for ATI/AMD proprietary FGLRX graphics driver. It also says this driver is active and currently in use.
So, can anyone else offer some help. I love the system and the way it does everything but it needs sound. Incidentally when I ran WUBI (while Windows 7 was on there) I did not have a problem with the sound!
I currently have XP installed on a NetBook (Samsung NC10), and would like to run Fedora on it. I'm currently looking at putting Fedora onto a flash memory card to test it works OK on the hardware, before installing it to the hard disk. The problem I've got is that the boot sector is occupied by WDE software (TrueCrypt). Will this pose a problem for dual-booting XP with Fedora, or will GRUB move the boot loader in the usual way?
I just set up a dual boot on a system with fedora 12 and XP. XP in on one hard drive (sda) and Fedora on a second hard drive (sdb).
I installed grub on the Fedora disk so as to not touch the windows disk at all.
Prior to installation, in the bios, I set the Fedora disk (sdb) first in the boot sequence, and then XP (sda) so that the grub loader would boot up by default. (If I set the windows drive first then the system bypasses grub and loads straight into windows.)
My system can now boot up into Fedora fine, but if I select windows from the grub loader menu I just get a blinking cursor - windows will not boot.What do I have to do so that grub can boot into XP?
I wanted to play w/ Linux at home so I bought the O'Reilly "Ubuntu: Up and Running" book. I'm using the included 10.04 CD. I'm not finding much info on installing from a CD there (well, not finding it easily at least).
I got an old Compaq desktop (model 5WV280, if that matters) from a friend. I checked the BIOS listing; it lists the CD as the first boot drive, diskette second, hard disk third. I don't have the password for his account, but I didn't think that would matter.
Anyway, I inserted the CD, did a shutdown and power up. The CD drive spins and the light comes on. Next, the diskette tries to spin and the light comes on. Finally the hard disk access light comes on and the silly thing boots to Windows XP Pro from the hard drive.
Did I miss something? I put the CD in my (heaven help me) Vista machine, and was able to read the CD with no problems.
I have been using Ubuntu for years. I just bought a new laptop - HP Compaq 621. Hardware settings:
Processor: Intel(R) Core(TM)2 Duo CPU T6570 2.10GHz Memory: 1GB ROM Date & revision: 01/07/2011, 68PVI Ver. F.09 Video BIOS Revision: ATI 01/05/2011
I followed exactly what is described on Ubuntu [URL] Believe me, I burned image (not .iso data) to CD, but BIOS won't boot from the Ubuntu bootable CD. I also created a USB stick, again BIOS won't boot from the Ubuntu bootable USB (I selected to boot from USB first) stick. I tried with Desktop 10.10 32bit, 10.10 64bit, 10.04 32bit, and 10.04 64bit.
I also tried with my old Ubuntu Desktop 8.04 64bit bootable CD, which my very old Compaq Laptop installed. It allows me to see the menu. I selected "Safe mode" to install Ubuntu. But it gives me the error message: "udevd-event [1412] run_program /sbin/modprobe"
how I can install Ubuntu on my HP Compaq 621 Laptop?
I've been wrestling with this for the last couple of days - I can't dual boot XP and F10.
[code]...
I did notice when installing F10 that it remapped my drives, making the WIndows and therefore boot drive /dev/sdb and the Linux Drive /dev/sda. I know this requires changing some of the drive designations (hd0,0 etc) but I've done it twice and ended up only being able to boot into Windows.
I need to remove my dual boot of WinXP & F9 to replace them with F10. Should I format the disk before installing F10? I'm still a beginner in Fedora. & How is the fedora 10? do you recommend replacing it compared to F9?
I have two hard drives in my PC, ubuntu 8.10 on the first. After reading good reviews about Fedora 10, i decided to give it a try. I installed Fedora 10 in my second hard drive and the distro is great. But my problem is that now I cannot get into the Ubuntu install. I changed the /boot/grub/menu.lst file as recommended by several posts, but no progress. my menu.lst file below. if I have got it wrong or if I need to add anything.
I'm looking to dive right into this whole GNU/Linux thing, and am looking to try out as many distros as I can. I've already installed Ubuntu Jaunty Jackalope, and want to dual boot fedora 10 with it. How hard would this be for a total linux n00b like myself?
I have a PC with two 40 Gb hard drives. Vista is currently installed on drive 0. Nothing is installed on drive 1. If I switch cables to the drives, Vista will be installed on drive 1. Nothing will be installed on drive 0. If I then install Fedora 10 on drive 0, will it automatically detect Vista on drive 1 and allow me the option of using Grub or something else to boot it? I want to avoid having Vista overwrite my MBR, but I don't want to piss my wife off because she can't access windows for two weeks while I figure out how to customize Grub or install something else. If I need to customize Grub, (or some other boot loader), I would need step by step instructions. Is there a book or online tutorial?
I've successfully used Fedora 11 from a USB stick as a live cd iso. Everything seems to work on my netbook so i want to try installing it but I need it to be a dual boot with windows. How can i do this? And will it definitely work or are there issues (I've read that F11 has problems installing if not taking over the entire HD)?
I have managed to reduce the default LVM F8 install to make room for F10... See Bare metal backup:
[URL]
And shrink the partition:
[URL]
I now have about 50G free on a 80G drive. The F8 system has a small /boot and an LVM partition that includes swap. What I want to do is install F10 WITHOUT LVM on the free space. Access to the F8 LVM drive would be a plus but not complete necessary. I just want to keep the F8 system as is until I get set up with everything under f10, which may be a bit. I am not sure what to enter for mount points for the custom drive layout. I need a small swap partition (I don't want to use F8 swap because it will be going away in the future, for example when I install F12 and have dual boot F10/F12 system. What should I have as primary partitions and which as secondary?
Only Fedora 11 is on the boot menu after replacing Fedora 10 by new install on a 10+WinMe dual boot computer. The WinME partition is available after booting Fedora 11. How do I add WinME as a boot choice?
I would like to try out fedora 12 using dual boot method. i currently have ubuntu karmic installed with grub2 and ext4 partitions and would like to dual boot with fedora 12. if i just install fedora 12 will it automatically pick up ubuntu karmic as welland add it to grub. will there be any problems since fedora uses grub legacy and ubuntu uses grub2?
fresh installed F12 on secondary drive, XP on primary drive. Then swapped drives making F12 primary. I boot into F12 fine, I also get menu to boot Other but when I choose this option instead of going into XP I get error 22 no partition? I can swap the drives around & boot into windows fine. I know I must not be pointing or having F12 pointing to the correct partition for XP.
I am a relative newbie to Fedora 12, altho did start with OpenSuse. I installed XP first with the games that couldn't run via wine. Then I installed Fedora but I must've done something wrong as although Fedora runs fine with a few personal tweaks with everything I want I can't access XP as it is no longer an option in the boot up. What do you suggest I do. I have a system rescue cd ready but don't know how to access the boot or change it.
I just installed Fedora and I love it but I can no longer boot Windows 7. I have two hard drives, sda and sdb.sda1 is my windows partition. sda2 is my /boot for Fedora. sdb1 is an ntfs partition for storage. sdb2 is swap. sdb3 is my 40 gig /root partition. Why can't I boot windows?
I have pc containing 80 GB Hard Disc with 1 GB RAM. I am using 60 GB for windows and 20 Gb for Fedora 12. Recently i formatted the pc and reinstalled both. I installed windows 7 instead of Windows XP i am using earlier. Now i do not like windows 7. My system became very slow. perhaps as my pc is five years old and motherbord configuration may not be matching. Now i want to revert to windows XP. I do not know any method by which i can retain fedora 12 and change from windows 7 to XP. Earlier i formatted complete hard disc and installed fedora 12 (myself) after windows 7 (by professional). but now i do not want to reinstall fedora 12. It will lose all upgradation and installed packages.
I just bought a new laptop with the Intel I3 processer in it and it came with Windows 7 preloaded. I am running Ubuntu 9.10 32 bit on my old system but decided to use this opportunity to upgrade to a 64 bit OS and Fedora seemed to be a good choice. Anyways, the problem I'm having is that I am trying to run dual-boot with 7 and Fedora. I got it installed and from the grub menu, I can load both OS?s. I can boot 7 just fine but for some reason Fedora will not finish loading. It will start loading, run though several scripts and then the screen goes black like its trying to go to a splash screen but that were it stops. I tried the rescue option on the boot DVD and it pretty much did the same thing.
A while ago I used a friends computer with F11 installed on it. I definitely want to install F13 on my computer now. Please, can someone either tell me complete information from the beggining to the end, or simply direct me to a guide somewhere else on the internet. I have a F13 live cd and want Windows 7 to be in control of the boot (by I suppose LiveBCD).
I'm using ubuntu 10.04 at the moment and I'm interested in fedora 13.
Here is my grub.cfg file
I'm going to delete my sda1 entry (mandriva) and put fedora there instead. Will Fedora automatically detect my other partitions? If not, will copying and pasting the other entries into fedora's grub.cfg ?
I installed Ubuntu, and then Fedora so I could choose between the two, but after installing Fedora I thought I would get a choice, but it just boots to Fedora. Here's a screenie of my gpart and a paste of my grub. Can you tell where I screwed up, and how to fix it?