Epson R285, good as gold on FC14, and intially onFC15. Entering the cups admin tool, localhost:631, the printer is set up, the correct drivers are slected, paper size OK. Cant get it to print a test page, its wants the password for CUPS and wont accept root, but root login can change all other params.
On the gnome printer applet , you can unlock it, add printer select local, and it goes away and finds the Epson R285, click on "add" it queries the printer and immediately drops back to the original printer applet. Without adding a printer. I haven't succeeded with network printing, the firewall is open on port 631, yet any attempt to find it from another computer fails. The gnome printer appet which interfaced with Gnome 2.x was nice, you could select everything needed. Not with this thing.
Tried on two computers, one laptop, one desktop. Downloaded DVD iso image and burned to DVD. Booted from CD and boot loader appears, and started count down. After the count down finished, nothing happen. Then I downloaded the netinstall image and repeat the procedure but with exact same result, nothing happened after the count down.I tested the download iso by installing it to a VMware VM, and installation completed. I don't even know where to start trouble shooting The only thing common between the two machine is the Nvidia graphic chip.
After doing an upgrade from FC14 to FC15, I then updated the packages by doing: yum update yum yum clean all yum --releasever=15 --disableplugin=presto distro-sync I then get the following voluminous list of issues (148 pre-existing rpmdb problems). I've done an rpm --rebuilddb but no help.
Running rpm_check_debug ERROR with rpm_check_debug vs depsolve: libclutter-gtk-0.10.so.0()(64bit) is needed by gthumb-2.12.3-2.fc15.x86_64 Please report this error in [URL]
Found 148 pre-existing rpmdb problem(s), 'yum check' output follows: ImageMagick-c++-220.127.116.11-15.fc14.x86_64 has missing requires of ImageMagick = ('0', '18.104.22.168', '15.fc14') akonadi-1.5.3-1.fc14.x86_64 has missing requires of libboost_program_options-mt.so.1.44.0()(64bit) alchemist-1.0.37-8.fc12.x86_64 has missing requires of python(abi) = ('0', '2.6', None) ..... Your transaction was saved, rerun it with: yum load-transaction /tmp/yum_save_tx-2011-05-27-10-30qO4br9.yumtx
Well, it appears that downloading and installing libclutter-gtk-0.10.so.0 seemed to fix all the subsequent yum error messages, and I was able to install all the packages.
I have dahdi installed. And a wildcard card: dahdi_hardware pci:0000:04:07.0 wcfxo-1057:5608 Wildcard X100P modprobe dahdi returns: "FATAL: Module dahdi not found." and dahdi_genconf finds no spans.
I have commented out the following line in /etc/modprobe.d/dahdi.blacklist.conf: "#blacklist wcfxo", which I believe corresponds to the appropriate module. However modprobe wcfxo indiates that module is not found. I have an up to date fc15 installation.
After installing FC15 on my computer, I cannot boot on my windows7 due to an error 18. I installed FC on 2 new partitions I created during the installation, so I guess they moved before my window's.Is there a solution to fix this without erasing my windows partition? (at worse, I'm ok with deleting my linux partitions for I haven't done anything with it yet).
I upgraded Sunday evening from FC14 to FC15 using the yum preupgrade method. Services such as httpd, vsftpd, sshd, named and even the VNC server are all running. I can connect via VNC client and get a downgraded gnome desktop, but from the console, I cannot start X or gnome desktop.I have searched many threads over the last day+ and found many references to problems with nVidia drivers - and I have a nVidia adapter. but I am not sure what is next to do and need a lead.
I installed a fresh live CD version of Fedora 15 which has that new Unity desktop, but I also want the option of booting to the old gnome classic desktop session. So can I add that with the package manager, or just use terminal with yum install ?
following mjmwired instructions, I manually setup the sudo but I keep getting a parse error whenever sudo command is run. How do I fix this issue?I login as su -, then setup sudo using "echo 'myusername ALL=(ALL) ALL' >> /etc/sudoers". All appears OK. I exit su, and go back to myusername.
I've bought a HP Photosmart printer, HP Photosmart wireless e-All-in-One printer - B110a and i've got a problem installing it properly. I'm using Debian 6.0 Squeeze. When i connect the printer, Debian doesn't recognize my printer as the Photosmart B109 printer for unknown reason. When i go to the site of HP and search for a driver, it directs me to this site:I've downloaded that latest hplip file as a .run file and installed it. My printer is recognized proparly, but when i try to print a colored image, it comes out black/white. Something is not crrect. Does anyone recognize this problem with this type HP printer?
Installed fedora/configued samba, shared printer and i am not able to access shared printer from any of the fedora machine. I am able to access the printer /shared folder from windows machine. I dont know the process of cups installation.
Recently installed FC15 XFCE on my new hard drive in my laptop, bring it home from work and it wont boot up.
Only changes I made at work were removing the standard package manager, replacing it with yumex, and slightly changing the panels to more suit how I like to work. Other than that just a little browsing the web on work's wireless connection.
Now it will not boot at all. Pressing Ctrl+Alt+2 and the last command I see is "Started SYSV: Late init script for live image.."
Tried booting into the original kernel (rather than the updated one from when I first installed) and the writing is smaller so I can see an earlier message where it failed a process. This is relating to akmod_nvidia but I installed that a couple of days ago and have restarted a few times since without problems before.
"Starting LSB: Builds and install new kmods from akmod package failed, see 'systemct1 status akmods'service' for more details"
I do not even get a command like where I can type with Ctrl+Alt+2 to try running anything.
I tried adding "runlevel=3" to the end of the kernel line in Grub. Is that the correct way to try and force into command line?
uring its installation I faced the same problem as now: because my default sound card is gone and I am using an external one, during the installation, everythnig goes fine untill the first try for boot of the system, when the blue lines loads, loads, and stop on about 80%.I was told by specialist that the reason fot this is that the hardware check is failing and that this is why the system can not load. He disabled my sound card so to Fedora not to check for it (I don't know how) and installed Fedora 13. Now I am using it. And I am using an external sound card as well and I have sound working.
But now I want to instakll Fedora 14. And i tried and the same happened again!!! After installation, the blue bars loads, alods, untill abou t 80% and then stop!Please, tell me what to do! I have no connecion to the specialist now but I want to get Fedora 14 nstalled, and working with sound. This is the problem - that I have only external sound card
I'm going to remove Gnome3 from FC15 and, possibly, install KDE. I'm not sure about the options I have for it:I saw I can remove just the gnome-shell package. This makes me wonder if it is possible to replace the gnome-shell functionality with a gnome-2 equivalent, getting some of the gnome2 back how much of gnome-related packages can I remove? For example, is it advisable to remove gdm in favour of kdm? Are there gtk/gnome programs that are "better" than kde equivalents and are thus best left untouched, along with their dependencies? finally, somewhat unrelated, do you know good tutorials for gnome2.X expatriates to learn modern kde?
I recently installed FC15. When I try to execute a binary file, it shows permission denied message even when I login with the root user through "su -" command. It also give me the same message when I try to run a python script. How can I execute binaries in FC15?
where can i put the request for the [ FC15] build of:
dependencies for po-debconf:
Code: perl(Debconf::AutoSelect) is needed by po-debconf-1.0.16-5.fc15.noarch perl(Debconf::Config) is needed by po-debconf-1.0.16-5.fc15.noarch perl(Debconf::Db) is needed by po-debconf-1.0.16-5.fc15.noarch perl(Debconf::Template::Transient) is needed by po-debconf-1.0.16-5.fc15.noarch
I currently have an FC15 KDE, set up as I like it as a media server, and with squeezeboxserver (for Logitechs media system) running fine. But I'd like to set it up as headless - and it presently needs to have a monitor attached. No keyboard or mouse and it will boot to the login screen (so not a BIOS issue). I need to get it to boot without needing a monitor or requiring a graphical log in. I can administer via SSH and Squeezebox server puts up a webpage. FC15 doesn't use inittab any more, so changing run levels is fraught. I don't want to play with targets without a safety line ...
i just installed fc15 on a virtual machine and since i wanted to learn how to configure it manually, i chose minimal installation. i have referring the deployment guide, now im trying to configure the network interface. what are the steps i have to follow when i install a new network interface manually? no GUI tools are available here because of the minimal installation. im stucked
I currently run windows 7, I am interested in dual booting, upon burning the .iso to the disc using imgburn, I had a few problems with the installer when I ran the live disc, I'll assume it was personal causes, I googled several things for a simple solution, I went with using the Disk Manager in Windows 7 to shrink my current partition which I only have one which is running Win 7 on 140 GB's, using the shrink function in windows I unallocated 20 GB of that partition, I used this option because the option in F11's installer would not work at all. I rebooted from disc, loading the distro, and run the installer via desktop choose the use free space option and I got an error crash when it tries to execute this option which isnt the only time I got this error bug causing me to exit the installer, I copied the debug information in the details, I hope this is something simple because F11 isn't worth this much time.
I was running preupgrade and while it was downloading packages the system was suspended and then shut off. When I brought it back up and tried to run preupgrade again it would not finish the download it just said 'Download complete. Reboot.' So I did bit nothing happened. I tried running it again but still nothing.
I then ran 'yum clean all' and then tried preupgrade again and then it tried to download again but once it goes to the download part it just says its done and says to reboot.
i was about to install fedora i had checked first and then when i reenter the disk to install it on hdd it shows me gnome bug error and some kind of crash but the desktop was ready with 2 bug it says gnome crash and other i didnt remember ..so what you say , should i install using that cd or i have to recreate a cd with fedora 14.i m using win7 already i wanna dualboot