In all previous versions of KDE I had Console8x16 set as KDE font for all cases (Settings->Appearance->Fonts). After tonight upgrade, this (only!) font is not working. I can see it in font manager, I can set it in ...Appearance->Fonts, but actually remains default font. Two of about 30 attempts somehow (can not reproduce) succeeded to set "console 12" font, but it disappeared after restart.
1. What can be the problem in 4.4? 2. In /usr/share/fonts tere are 3 files named console8x16.pcf, console8x8.pcf and console9x15.pcf, but in the font list in Appearance->Fonts I can see only 2 - one named "Console" (seems to be 8x16 and "console" (8x8). File 9x15 does not appear at all. Why?
Last results of attempts: cannot use console font in part of areas, while part works OK. For example: kdevelop editor, kmail message body text works OK. But kmail other parts - does not. The most interesting is that although setting the kmail body message text to console displays the message body text correctly (with console font), but the example message in "Configure kmail" dialogue "The Quick Brown Fox Jumps Over The Lazy Dog" is displayed in the default font, as if there is no console font!
I have fedora 13 set up on a HP6715S laptop. Runlevel 3 is a problem, because the capital letters are the size of full stops. Reading a little, I can try a grub vga setting, but I am not keen as my screen is 1200x800 and X cannot set it otherwise, so I doubt grub could. There's KMS for radeon cards, and the kernel can do what it likes. The biggest font supplied with fedora is sun12x22, which doesn't even have a euro sign. I gather I can go to a height of 32. Anyone know of larger consolefonts, or a wheeze to double the size of one of the others, e.g. lat9w-16? setfont-h32 increases height, but not zoom, so it's like a double spaced console.
That is - most of the applications using console (8x16) font does not display it after upgrade to KDE4.4, including "System settings->Font installer". kdevelop (kate), contrary, still sees it, and one-two more applications...
From inside my bash script, is there a way to increase my Xdialog default font size? If not, is there any other way to do it? I found a commercial program using Xdialog with instructions on increasing the font size, but they did not say how they did it. But, it does mean it can be done:[URL]...
When I am in the middle of reading a post in Akgregator and I decide I need larger characters, I press [Ctrl [+]] to increase font size. This increases the characters displayed but also displaces my vertical reading position so that I have to scroll to the text I have been reading.
From inside my bash script, is there a way to increase my Xdialog default font size? If not, is there any other way to do it? I found a commercial program using Xdialog with instructions on increasing the font size, but they did not say how they did it. But, it does mean it can be done: [URL]
I am writing a program in C to create a GUI application using GTK 2. My actual program is quite large, so I am using a modified version of the sample program from GNOME library for trial. I wish to increase the font size, and I have using PangoFontDescription. I have made that section of the code bold and italic below for quick reference to the code that affects fonts. But it does not make any difference. I am compiling the C file using gcc. The code is as follows(hello.c):
Now I know that I could use "consolechar" command with option "f " to set other fonts temporarily. The problem for me now is that I had tried almost all of those fonts in directory /usr/share/consolefont/, but I could not find a suitable one, none of them are beautiful. So, I hope one can tell me how to get the fonts and how to set the font I like to be lasting.
Not the gnome-terminal fonts... That's easy... How about the font faces on tty1-6? I tried Slackware once... It was way back in my Linux experience so it struck to me as a clumsy and ill-managed operating system despite that the fact is the exact opposite... Well, as it appears, Slackware did have something about changing the console font since it mostly focused on terminal, you know, it booted up in terminal by default, for starters. Anyway, since Ubuntu is Linux as well, I guess there must be some way of changing the font face for the terminals, eh?
I've coma across a problem I have not been able to solve myself. Is there a function in the linux API similar to GetConsoleScreenBufferInfo() on Windows? refer to: http://msdn.microsoft.com/en-us/libr...=vs.85%29.aspx
I only need to get the current color settings of the active terminal.
I'm running RHEL 5.3 on one box at work; after the initial installation, the console font was fine (although it was visible in only one of two monitors: dual-head was configured automatically).After the first yum upgrade (which brought in dozens of packages), the console font became almost unusable. At first I can log in (say, on TTY1), but after the next few keystrokes every blank part of the display is changed to a capital G with a caret. Also, stdout (in some cases) is in an unreadable (for me, cyrillic maybe?) font. (And now the same - corrupted - display is visible in both monitors) I can't find the command to choose another console font. Looked in the "system-config*" type scripts to no avail
After reinstalling Squeeze's base system, the console font is too small to read comfortably. I tried to pass the kernel parameter vga=0x303 without success. After init starts the font reverts to a very small font that I cannot read comfortably on my 17 inch TFT LCD monitor.
I am using ubuntu lucid.as a desktop and don't run a server. The editor I use is vim so increasing font by edit > profile preferences. What I need to know is how to increase the size in console ie. when I use Ctrl +Alt + F1 to F6. On running xrandr I get this :
I know that,the graphical user interface ( using X windows , I think ) sits on top of the base system ie F1 to F6. In the Fs , xrandr replies "Can't open display ". The question is am I right in thinking that "gui" is totally independant of the base ( is that the correct word ?). I have read that messing about with resolution can wreck a monitor ( I'm using a laptop) , is there a safe way to proceed?
What's happening to the console screen resolution in version 11.3? I have been using an 80x24 character console screen to run character based software and I want 80x24 to fill the whole screen. To do that, I have chosen "text mode" on the initial dvd boot up screen (F3 before choosing install). Choosing a higher resolution installation produces gui installation screens and results in console screens with progressively higher resolution, smaller type and more characters/line and lines/page, as the gui resolution increases. The installation resolution does not seem to affect the xwindows resolution. However, when I installed ver 11.3 using the text mode installation, the console screens alt-F1 to alt-F6 had very small text and the 80x24 text area fit in a small rectangle in the upper left corner of the screen. How can I fix this? My system is an Asus M4A785-M motherboard with a 2.8 ghz quad core athlon II, using the onboard ATI Radeon HD 4200 GPU.
So I set up that OS I was talking about, everything I need, staying away from the "Startx" command, and it's working very very awesomely except for ONE little problem. The console font size is too big for me, and honestly I don't know how to change that. Coming out of Ubuntu, I'm realizing I don't know as much about config files as I think I do :P
Any way I can change the font size? When I use the GParted live cd, I see a line in the start up that mentions changing the frame buffer to 700 x 48 or something, I'll get specifics soon (computer's not on me) and it makes the font and everything just how I like it.
I am have upgraded from 9.04 to 9.10 in my laptop. After performing the reboot, the shell/console resolution went very high and the font size went too small. How to regain the old console shell resolution as in 9.04. I require this urgently as my laptop suffers the white screen problem. Switching between Ctrl+Alt+F6 and Ctrl+Alt+F7 I could get back the screen as the change in the resolution switches off and on the screen, so that I can negotiate with the white screen problem.
After an update on squeeze about a week or two ago, my console font turned green. I'm not exactly sure of the timing, because I switch between lenny and squeeze, and some time passed between the update and the reboot in squeeze.
During the update, I was asked if I wanted to keep my altered /etc/grub.d/00_header or take the package maintainer's version. I took the PM's version, knowing I'd lose my edit (set gfxpayload=1024x768x16). When I add that line to the new 00_header, run update-grub and reboot, the console font is the size I want, but it's a dull green. Reminds me of my first computer. How do I get it back to white and keep the 1024x768 resolution?
Currently booting with grub-legacy and chainloading grub2. If I boot entirely with grub-legacy, and pass vga=791, the console font will be white. It doesn't matter which kernel I use. Currently, I'm running 2.6.32-3-686. Same behavior exists if I use 2.6.30-2-686. If I use 1024x768x8 I get a dull gray instead of dull green.
I'm trying to do is protect the computer against housemates. The standard procedure I do with Lenny:
1. Password protect BIOS.
2. In BIOS, always boot from hard drive. Disable booting from any other device such as USB or CD-ROM.
3. Password protect Grub (v1) using the "password --md5 $1$9MuaA/$5TDLgvmcEiCWNr5W9VaMK1" syntax in my menu.lst file.
With the above precautions in place, [I think] the only way to gain root access to the system is to take the case lid off and proceed to do stuff physically (like set jumpers and/or take out the hard drive). Am I correct? My reasoning for this is, the computer boots -> must boot from HD -> must load Grub -> must go to default menu item since others are protected, and cannot command prompt in Grub without password.
Anyhow, In Squeeze, I was a bit disappointed to find out, after doing a bit of Google-research, that Grub v2 (which is standard on Squeeze now) does not easily support password protecting the Grub menu. Am I correct? Will this issue perhaps be addressed in the Squeeze final release? Is this feature dumb anyways because the Grub password is of no use (i.e. my paragraph above is complete horseradish)?
Another thing I would like to do is change the console font and size back to something more "normal" or "classic", not some crazy tiny font that's only found in totally bleeding edge Linux distrubutions <gasp!>. I found that the Squeeze console font (e.g. when I type Ctrl+Alt+F1) is wicked tiny. I wanna change it to "normal". Grub v2 password and console font config?
My Squeeze installation has the horrific 80x25 line display, and I cannot stand it. I know it can do better, because the grub screen is very tiny. I ran dpkg-reconfigure console-setup, but the offerings there aren't much better. I don't know what happened to the good ol' days of grub when all you had to do was pass vga=791 to the kernel to get a decent console size... but it seems they are gone.
I don't really understand this new v2 grub... I don't know why it was necessary to change how it was configured, when it seemed to work so exquisitely. how I would accomplish the functional equivalent of passing vga=791 (1024x768@75hz) to the kernel in grub
I've read so many howto's and threads but never managed to get a decent font size on my tty's. Before grub2 I used to use vga=795 (or something like that), but now that isn't working anymore. I have a 24" Samsung screen and the font size is HUGE. Has anyone with same hardware succeeded in setting a decent resolution? I've played around with gfxpayload and all that stuff. I'm using fglrx driver on an up-to-date system.
The title pretty much says it all. Once I get past GRUB, the font becomes HUGE and starts off screen. It appears to be center zoomed because I cannot see the login prompt nor anything I type. It's not really an emergency, I installed OpenSSH during the OS installation and can just turn it on and log in over SSH or start up Webmin. It just bugs me that I cannot figure this out.
There is no graphical environment installed, so it's not a video card issue. I tried adding vga=ask as a kernel flag and then tried several options, but to no avail.