Fedora :: How To Update Packages Below 1 MB Of Size Only

Apr 4, 2011

I want to update my fedora (Yum update), but not all of the packages in repositories! Only packages that have size<1MB ! How can I do it? Does have YUM this ability?

View 4 Replies


ADVERTISEMENT

Fedora :: X11vnc Screen Size Don't Update Past 800x600?

Feb 10, 2011

How come on x11vnc, with Fedora 12 PPC/x86/x64, my screen sizes can't be greater than 800 x 600, and they don't update when I change them in Displays. On my Ubuntu installations the x11vnc screen sizes update and can be basically any size selectable in Monitors.

View 1 Replies View Related

Fedora :: FC13 'yum Update' Aborts Wth Bogus Compaint About Size Of / Boot

Jul 4, 2010

An a stable FC13 system, after resolving deps and downloading rpms, 'yum update' aborts with this single error message:Transaction Check Error:installing package kernel-PAE-2.6.33.5-124.fc13.i686 needs 801KB on the /boot filesystem.Silly thing is, I have at least 52MB available on /boot.An important datapoint is that I resized the boot partition since the initial install from 64MB to 128MB, which makes me think perhaps yum or anaconda recorded the original partition size, and is not looking at the current (correct) size of /boot.

View 2 Replies View Related

Fedora Installation :: Possible To Update Packages On F12 USB Live?

Jan 4, 2010

I installed F12 to a live USB stick. When I boot up the system it says there are several hundred updates available. I've tried to update packages, but when I reboot the updates that claim to have been made do not appear. The system reverts to its original state after reboot.

So is it possible to do this? Can one have persistent packages? (this does seem to work with ubuntu)

Or is F12 on a live USB stick supposed to be pretty much the same thing as having a live (read-only) CD?

What I'd really like to do is have a small version of F12 on a USB stick that has up to date packages I need while dropping the packages I don't need.

View 2 Replies View Related

Fedora :: Cannot Update System Or Install Packages

Jan 16, 2010

I just switched over from Ubuntu to Fedora 12 (KDE) and am having a problem with installing packages and updating my system.

When I use KPackageKit to update my system, I get this error:

Code:
Error Type:
Error Value: Error getting repository data for installed, repository not found
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3125, in
main()

[Code]....

View 2 Replies View Related

Fedora :: Check Packages After Failed Update?

Jul 4, 2010

I've been a long time ubuntu/debian user, and I decided to give fedora a try. Durng my first set of updates after install, the updater (gpk) seemed to stall on an 'updating libraries' step (it lasted for over 12 hours). Anyway, I force quit the program, restarted the system, and all appears fine. What I wanted to ask is this; is there some way to check the yum log to see if the update completed successfully, or an equivalent to 'apt-get -f install' to fix any broken/partially installed packages.

View 3 Replies View Related

Fedora :: Gnome Bars Gone After Packages Update?

Dec 27, 2010

I'm running F13 on a HP laptop. I've been about 10 days with no internet connection. Yesterday I got internet again, and I did a package update.

After that, I rebooted and both top and bottom bars were gone from my Gnome desktop. I couldn't retrieve them anymore.

What can I do to get them back?

View 2 Replies View Related

Fedora X86/64bit :: F15 - No Packages Marked For Update

Jul 6, 2011

Due to this thread -> [URL] we discovered that my Fedora runs rc kernel. After several tries to update to stable one, no result came. I need your guidance to update my system.

What I tried:
yum update
yum update kernel
yum clean all

The result is the message:
[root@dimitris ~]# yum update kernel
Loaded plugins: langpacks, presto, refresh-packagekit
Setting up Update Process
No Packages marked for Update

Can I update to PAE kernel? This question is for i686 cause it cannot recognize all ram (4GB total, 3.2GB available). I run x86_x64 but I have this question...

View 14 Replies View Related

Fedora Installation :: Upgrading From F10 To F11: No Packages Marked For Update

Jun 12, 2009

I've just updated fedora-release* packages, then, after a yum upgrade command I get the message: No Packages marked for Update

View 1 Replies View Related

Fedora :: Way To Rollback The Packages Installed In Last Software Update?

Aug 7, 2009

Is there a way to rollback the packages installed in the last software update?I cannot reach the gui login screen (x-server) ever since my last software update.Hence cannot login.Too bad the old xserver restart key (crtl+alt+bkspace) dont work anymore.Also, I dont remember the command to view the system logs to know what went wrong.

View 8 Replies View Related

Fedora :: Rpm Check Debug From Yum Update - Packages Not Compatible?

Dec 14, 2009

After yum -y update I get this at the end of the process. What should I do, have no idea...is it mandatory to erstart with right kernel for each package?

Running rpm_check_debug
ERROR with rpm_check_debug vs depsolve:
kernel-uname-r = 2.6.27.21-170.2.56.fc10.i686 is needed by (installed) kmod-ndiswrapper-2.6.27.21-170.2.56.fc10.i686-1.53-5.fc10.17.i686
kernel-uname-r = 2.6.27.21-170.2.56.fc10.i686 is needed by (installed) kmod-wl-2.6.27.21-170.2.56.fc10.i686-5.10.79.10-2.fc10.i686

[code]....

View 7 Replies View Related

Fedora :: Update Packages From Media Instead Of Internet Repository?

Jan 10, 2010

How to update packages from Media Instead of Internet Repository. When I install package using the below command the packages are getting updated from Internet repository. How can I update the packages from media (ex fedora 12 dvd).

Example
yum install gcc-4.1.2
or
rpm -i gcc-4.1.2

View 2 Replies View Related

Fedora :: No Sound After Update - Updated Packages Are Listed?

May 10, 2010

I updated the following packages:

[Code]...

Before going to sleep I just closed my laptop without shutting down, but the next morning when I unlocked I had no sound. Does anybody see something suspicious in the updated packages?

View 1 Replies View Related

Fedora :: Update 15 And Taking Too Long - Even Cleaning Of Packages

Aug 16, 2011

I tried to update fedora 15 and it took too long , even the cleaing of packages took too long At the end of the update got the status cleaning up packages that took even longer than the whole update.

View 3 Replies View Related

Fedora Installation :: RPM Fusion Error - Can't Update Packages / Solve It?

Jun 1, 2011

I wanted to do a routine check/update today and I received this error code...

View 3 Replies View Related

Software :: Fedora Core 6 Won't Connect To Internet Or Update Packages

Mar 8, 2011

I have an old laptop running Fedora Core 6. I need to update it for a project at work. I am using my home network and a hard wired connection. I can ping my router, and ifconfig shows my interface is active and has the right IP address assigned. When I try to open the GUI package updater, it fails to connect. Opening an browser also fails to connect. My firewall is turned off. I suspect a service is not starting, but everything I can think of is running. why layer 3 is working, but my apps won't connect to the Internet?

View 9 Replies View Related

Fedora Installation :: Update Media's Repo Information To Reflect Some Of Updated Packages

May 13, 2011

I am creating custom install media using the Fedora Core 14 DVD as a base and I have gathered all of the packages and their dependencies I require using the yumdownloader command.I made sure to download the @core group along with the ones listed above. The problem I'm running into is that I don't know how to update the media's repo information to reflect some of the updated packages I have downloaded. So when I go to install on the device, it's saying it can't read/open a certain package and you can see that it's looking for an older version because I'm guessing its repo is telling anaconda that this is the specific version to look for. I'm looking for a way to "update" the repo found on the installation media.

View 1 Replies View Related

General :: Header Border Frame Missing In Fedora After Update The Software Packages

Jul 14, 2011

After installing some Fedora software updates, I can no longer see the header frame in every window. Furthermore, I can't access any window frame after I open a new window frame.

How can I fix this? Can I remove all the updates I recently installed?

Note : After installing these update, when I reboot the system, I can see there are two version of Fedora.

View 1 Replies View Related

Slackware :: Way To List All Packages By Size?

Apr 2, 2011

pkgtool just lists it in alphabetical order.

View 14 Replies View Related

Ubuntu Installation :: 10.10 Update - Update Manager Check Packages Again After Uncheck

Nov 6, 2010

I just installed ubuntu 10.10, and im triying to update, when i uncheck the packages that i dont want and click on the "install updates" button in the update manager, the update manager check it again and download the packages that i dont want

View 1 Replies View Related

Ubuntu Servers :: Every Time Logged In Via SSH Got A Message Telling There Where Packages To Update Including A Security Update?

Feb 11, 2011

I was running 10.04 LTS and had decided to stick to the LTS versions as I'm now running my machine as a server and don't want to be updating regularly.Every time I logged in via SSH I got a message telling me there where packages to update including a security update. So I did a search to find out how to perform an update on Ubuntu server from the command line.What I found was to do this:sudo apt-get updatesudo apt-get dist-upgradeAfter doing that I rebooted but now my machine gives me this message:

init: ureadahead-other main process (794) terminated with status 4Your disk drives are being checked for errors, this may take some timePress C to cancel all checks currently inprogressI'm not pressing C yet and leaving it alone to finish, but I noticed when the machine booted that one of the options for booting talked about Ubuntu 10.10, so I'm worried that I've updated from 10.04 LTS to 10.10 by accident?

View 8 Replies View Related

Fedora :: Re-size Logical Volume And Then Re-size File System?

Jan 19, 2011

is lvresize with --resizefs options re-size the Logical Volume and then re-size the file system? i mean we don't need to use resize2fs?I looked at man pages but it doesn't explain this option.

View 3 Replies View Related

Red Hat / Fedora :: Inode Table Size And File System Size

Dec 14, 2010

How can we find the maximum size of the inode table and what decides it, and how the maximum size of volume of file system is decided ?

View 4 Replies View Related

Fedora :: Cant Update Get A Message That Says "Local File Conflict Between Packages"?

Oct 10, 2009

I have not been able to update in over a month. I get a message that says "Local file conflict between packages"
When I click on More Details, I get:

Test Transaction Errors: file /etc/fonts/conf.avail/25-unhint-nonlatin.conf from install of fontconfig-2.7.1-1.fc11.x86_64 conflicts with file from package fontconfig-2.6.99.behdad.20090508-1.fc11.i586
file /etc/fonts/conf.avail/30-metric-aliases.conf from install of fontconfig-2.7.1-1.fc11.x86_64 conflicts

[code]....

View 14 Replies View Related

Fedora :: Get: "No Packages Marked For Update"

Jun 13, 2009

I always have notification about 1 update in the bar (update applet, red star)When I trying to get the update, I get: "No packages marked for update"

yum clean all
yum update
Loaded plugins: refresh-packagekit
Setting up Update Process
No Packages marked for Update

What wrong with the update applet? (FC11)

View 8 Replies View Related

Fedora :: Difference In Operation/function Between Their Packages And The Packages Download On Virtualbox.org Website?

Feb 22, 2010

On Fedora repo I found VirtualBox-ose packages there. What will be the difference in operation/function between their packages and the packages download on virtualbox.org website?

View 5 Replies View Related

Fedora Installation :: Preupgrade Leftover Packages - 176 F13 Packages Remaining

Nov 17, 2010

I recently upgraded from F13 to F14 using "preupgrade". This is the first time I've used preupgrade. So far, F14 is running OK. There are some leftovers from F13 and I'm wondering if this is correct.

Q1: There are 176 F13 packages remaining. [alfrugal@localhost Documents]$ rpm -qa | grep fc13 | wc -l 176 Is this OK? FWIW, after the upgrade, I ran "package-cleanup --orphans" as recommended by the "preupgrade" page on the Fedora Project wiki.

Q2: Also, my GRUB menu was correctly updated for F14, but it still contains the three entries it had for F13. Is it normal for the preupgrade process to require the user to clean up the obsolete entries from the GRUB menu?

View 2 Replies View Related

Fedora :: Install Packages From The 14 Dvd Instead Of Downloading From Internet Using Add / Remove Packages

Mar 31, 2011

im using fedora 14 and i have a slow internet connection. i want 2 install some packages from the fedora 14 dvd instead of downloading from internet using add/remove packages. i tried to edit /etc/yum.repos.d/fedora.repo and /etc/yum.repos.d/fedora-updates.repo but it dint work.

View 2 Replies View Related

Ubuntu :: Option For Default Terminal Size Gone After Update

Sep 24, 2010

After updating/upgrading my packages this morning, the terminal profile preferences screen (Edit > Profile Preferences) no longer had the option at the bottom for setting the default terminal size. This is a problem because the default size went from the 132x43 I had set it to down to 80x24. I'm running Ubuntu 10.04 LTS on three machines and had this problem on all of them. After noticing the problem on the first machine, I checked the option screens of the other machines before upgrading. The default size option was there before the upgrades, but after upgrading, it was gone.

Here is the aptitude log from the upgrade:
[UPGRADE] ant 1.7.1-4ubuntu1 -> 1.7.1-4ubuntu1.1
[UPGRADE] ant-gcj 1.7.1-4ubuntu1 -> 1.7.1-4ubuntu1.1
[UPGRADE] ant-optional 1.7.1-4ubuntu1 -> 1.7.1-4ubuntu1.1
[UPGRADE] ant-optional-gcj 1.7.1-4ubuntu1 -> 1.7.1-4ubuntu1.1
[UPGRADE] gnome-terminal 2.29.6-0ubuntu5 -> 2.30.2-0ubuntu1
[UPGRADE] gnome-terminal-data 2.29.6-0ubuntu5 -> 2.30.2-0ubuntu1
[UPGRADE] google-chrome-stable 6.0.472.62-r59676 -> 6.0.472.63-r59945
[UPGRADE] libphonon4 4:4.6.2-0ubuntu5 -> 4:4.6.2-0ubuntu5.1 .....

It's almost surely gnome-terminal or gnome-terminal-data, but I included the full list just in case. What are my options for fixing this? Should I try rolling back the upgrade? Should I not bother with that and just try setting the default terminal size through other means?

View 9 Replies View Related

Ubuntu :: Update Manager Error - Size Mismatch

Nov 29, 2010

When I try to update my software through update manager, I get this error:
W: Failed to fetch [URL] Size mismatch
As a side note, when I enter Update Manager, it does not show 10.10 as an available update. I have checked my settings. I am quite kurfluddled by all of this.

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved