I have problem with funs speed in my fujitsu rx100 s6 server, rpm funs is 3000 ? I think it is not standard speed funs. On windows 2008 server funs works quietly. Fujitsu supports only windows servers, red-hat enterp. and suse enterp. Is there any software to control speed fans?
I've installed f11 on my machine and am wondering how to control the fan speed for my graphics card, its a asus EAH4850 (single slot, fan starts automatically at around 10% speed).
The card goes at around 85 degrees Celsius with stardard speed with no 3d, and 110+ when running any 3d application, wich then causes it to not respond. i have to set it to around 60% speed for safe temperature.
I'm used to windows, there i could either use the asus smart doctor or the catalyst control center to adjust fan speed, i'm looking for a linux alternative.
I have a Radeon 3870 (rv670) that seems to work great with fc13 out of the box, with one exception. The stock fan is constantly running full speed. It's too loud. Proprietary drivers don't support fc13 yet. Has anyone found a way to make this work?Edit: The best I could do was switch to ubuntu, install fglrx and then issue the following cli commandCode:aticonfig --pplib-cmd "set fanspeed 0 15"
How do I go about changing the fan speed? My laptop is running hotter than normal and although its not melting the case I'd rather turn the fan up to increase cooling if possible. Noise is not a concern as I normally have music playing anyway.
I have a Intel Core 2 Duo 1.86Ghz CPU and I have attached a Zalman heatsink & fan to it for extra cooling. However, the default fan speed is very high and it is too loud and definitely unnecessary. So I use this program in Windows called EasyTune5 (which is for gigabyte motherboards, the brand my motherboard is) and I can set the default speed to zero or 1. There are values between 0 and 100, 100 being full speed of the fan. Setting it to a low value like 0 or 1 makes it very quite. Of course the speed of the fan goes up when the CPU heats up or is being utilized more BUT most of the times during idle, its back to being really quite.
Does ubuntu have any software that can do this? I know there are software to check the cpu temp but i need one to actually control the default fan speed.
I got a new computer and got it running Slackware64-current. It's motherboard is an ASUS M4A88TD-M and it's processor is an AMD Phenom II x4 965. I decided to get some chassis fans to improve it's thermal performance. But, since I started the computer after installing the new fan (only one of the 3 I got) the fan's speed is at max and it's very noisy. I'd like Slackware to control it's speed according to temperatures from lm-sensors. Output of # sensors-detect can be found here. Kernel is stock -current 18.104.22.168. Output of # lspci is here.
Code: gtl@coruscant:~$ sensors atk0110-acpi-0 Adapter: ACPI interface Vcore Voltage: +1.31 V (min = +0.85 V, max = +1.60 V) +3.3 Voltage: +3.34 V (min = +2.97 V, max = +3.63 V) +5 Voltage: +5.08 V (min = +4.50 V, max = +5.50 V) +12 Voltage: +12.03 V (min = +10.20 V, max = +13.80 V) CPU FAN Speed: 2170 RPM (min = 600 RPM) CHASSIS FAN Speed:3409 RPM (min = 600 RPM) CPU Temperature: +40.0C (high = +60.0C, crit = +95.0C) MB Temperature: +32.0C (high = +45.0C, crit = +75.0C) k10temp-pci-00c3 Adapter: PCI adapter temp1: +0.0C (high = +70.0C, crit = +99.5C)
I installed Karmic 64-bit on a new Phenom X4 Quad-Core PC. I've replaced the stock CPU cooler with a Cooler Master Hyper TX3, enabled all fan control settings in the BIOS, switched their profiles on silent, enabled the Cool n' Quiet option as well but my CPU fan is still noisy and seem to be running up to the max number of RPM, thus ignoring BIOS specifications. Besides this I can tell there is something wrong with it since even the CPU is on idle or with just the regular browsing, media player operations, PC sometimes freezes or is automatically rebooted .
I installed lm-sensors and went through all the sensors-detect operations (output attached to this post) but it doesn't show anything else but the CPU and HDD temperature which is always 40 Celsius degrees.
Just installed the latest ubuntu on my PC. When I was running windows I had a tool called asus smartdoctor which allowed me to vary my video card fan speed. I really need to increase this fan speed as my video card overheats. Is there a unbuntu compatable program that would allow me to change the fan speed or do I need to install Wine and run smart doctor that way?
I'm trying to control the fan speed on my laptop (IBM Thinkpad T43.) I used lsmod and saw that the thinkpad_acpi module was already load, but I know I need the fan_control=1 option so I did this:
$modprobe thinkpad_acpi fan_control=1. Then I did: $echo level 7 > /proc/acpi/ibm/fan and I get an error: write error: Invalid argument
I'm not sure what I'm doing wrong here, Also, if I wanted to load the module thinkpad_acpi at boot time with the fan_control=1 option, should I add it to /etc/rc.modules? In other words, does the rc.modules file override udev? And do I need to remove the module before reloading it with the fan_control=1 option?
I really need some control over my fan speed, as it seems by laptop is running rather hot.
how to control the speed of the fan in my laptop ? i use ubuntu ...i don't seem to use it to full power and it is always cool .. it makes lots of noise.i don't know what to say for commands i've run . i tried lm-sensors but it says command not found. sensors gives me some output and "temp1" which say +69degrees maximum 89 ..i used the search function but it just gave me some unsolved threads.
I'm running openSUSE 11.4 with GNOME. I have an EVGA nvidia GTX 285 installed, which is equipped with a variable speed fan. I'm running the nvidia driver package which includes the nvidia X Server Settings utility. The utility allows me to view the fan speed as a percentage of its maximum speed but does not allow adjustment. It appears that the speed remains at the card default of 40% regardless of GPU or card temp. When running certain graphic-intensive applications my card runs quite hot (sometimes >70 degrees C). Although this isn't hot enough to burn the card up in the short term, it is certainly hot enough to shorten my video card's lifespan.
So, the question is how do I set up my system so I can increase the fan speed to 50% or better yet, get it to increase as the GPU temp increases? The nvidia X Server Settings help indicates that fan speed is adjustable after enabling coolbits, but coolbits is not installed on my system and is not available from the default repositories. What is the easiest way to obtain, install and enable coolbits? I have no intention of overclocking my card. It was too expensive to risk damage to the card.
I often run my ubuntu as SSH server only so i stop GDM when i do that, but i found out that after i stop gnome, my ATI gpu fans spins up like crazy and sounds like a jet plane, (i have ati closed source driver installed) i am worried to leave the fan on like that, so i have to start a X session again. Then the fan slows down I would like to be able to have slow fan speed when i drop to text mode only, one is its light weight, two is for security
I feel little silly asking this, I accidently removed from my gnome panel my internet connection, volume control and battery indicator on F11. how can I add this back. It does not show up in the add to panel menu and the applications do not give you back the default feel.
Volume up, volume down and mute keys on the keyboard don't control the volume any longer.They worked before. Hitting the keys brings up a progress bar widget with the volume level unchangeable, set at 0% (which is not accurate at all).It looks like the key mappings or key bindings are working, but there is a disconnect with actual functionality. The volume cannot be changed or muted anymore from the keyboard.
This worked just fine in KDE on Fedora 11 before upgrading KDE components yesterday with Yumex. I am now using KDE 4.3.2 I don't think that it's a coincidence that it stopped working after doing an update. I updated the kernel and nVidia drivers too, but this problem exists when I went back and tested with the previous kernel, so I don't suspect the kernel upgrade. No info in Xorg.conf about the keyboard. Is there a setting that I am missing?
Sound works just fine. I can listen to whatever source I like. This is not a problem with the sound drivers as far as I can tell.I just want to be able to control the volume with the keys on my Logitech Illuminated Keyboard, model Y-UY95. Is anyone else experiencing this?I can adjust the volume with Kmix 3.5 or GNOME Volume Control V2.1
Ubuntu 64bit. The sound system works and plays noises correctly when I test the speakers in sound preferances. The internet BBCi player(Radio) plays sound correctly. Banshee & Rhythmbox try to play music files at double, or more, speed with no sound output. Spotify Linux version also tries to playback at double speed with no sound output. Media Player attempts to play music files at high speed. Media player plays the Video and audio tracks at high speed. VLC Will play the video at normal speed but with no audio.
i both have the same problem, i'm trying to burn my images at 4 or 8 speed, but ubuntu 10.04 says that the hardware does not support that kind of speed and switch up to 16 speed and more. i know it can burn at low speeds, at least in windows, it is a bit strange that fast burning is okee, and slow not, what can i do to prevent this? i don't wanna burn to much errors on my discs
I just added a 2 port network card to a system that is running Fedora 11, but it is INACTIVE. I open the Network Device Control to activate it but there is no network ports in Network Device Control. It is empty.It looks like the system recognize the card and loaded correct driver.
I don't know how this happened, but my keyboard copy and paste functions have stopped working. Oddly enough, I discovered that I can only copy and paste by using the third mouse button. Pressing down on the scroll wheel after highlighting text copies the text, pressing it again pastes it Ican still use the Edit-copy and Edit-paste menu functions.
I'm sure it has something to do with all the tinkering I have been doing with my desktop. I have been experimenting with CompizConfig and Cairo dock, changing my themes and things of this nature.
I have the following nasty issue:I am using fedora 12 and I use vpn for working remote.When I browse the internet the speed is very slow!even when I do a yum update it downloads the packages with max 100kb. if I drop the vpn connection I download the packages with 1Mbdo you know what the problem could be? i created the vpn connection using the network manager...it is a regular pptp connection for the vpn!
Laptop is Dell Latitude C600/C500 with Pentium III 850Mhz, 256Kb L2 Cache, 256MB RAM, ATI M3 video card, HD 20005 MB and sound card is EES Maestro 3i. After trying to do something with Windows 2000 which was installed on the machine, I decided to put Linux without keeping windows on the machine. First I try with Xubuntu (latest version) which was working but slowly, then I found that Debian could work fine on that machine. I have installed latest version 5.08 and was surprised how goodly old machine can work. I solved problems with screen resolution (change from 800x600 to 1024x768) but I couldn't find solution how to fix problem with sound.
Actually I don't have sound on the machine. I looked for a linux driver for that sound card and Dell is only providing windows drivers. Then I found that I can solve the problem with ALSA drivers but I couldn't find the easy way (or any way at all) to install drivers and to get back the sound. When I click on 'Volume Control' (top right corner of the screen) I get the message: 'Volume control did not find any elements and/or devices to control. This means either that you don't have the right GStreamer plugins installed, or that you don't have a sound card configured.'
I am running Fedora-13 64 bit on my Dell Laptop, The same Laptop has Windows-7 as well (dual boot system). I have chosen ext3 filesystem while installing fedora. The file transfer speed in Fedora-13 over the network to my network drive comes out to be not more than 5MBPS.Where as in Wndows-7 I am getting the speed of around 10~12 MBPS. Also I found that copying files in USB flash drive is very slow than in Windows-7 . What could be the problem? To add it , I have another Laptop Running Ubuntu-10.04 , which also performs network transfers at 10~12 MBPS. So its just the fedora-13 who has this problem. As far as I remember this was not the case with Fedora-12
Since a while,the energy-saver shuts down the screeago,it happens after half an hour,but I didn�t set it up in that orders !It makes menervous,short time away from the comp,and soon the screen is dark!And the screensaver will not appear any more,too.I tried to enlarge the times in the energy-manager,created a new profile,switched off the laptopmode-service,nothing helps!And it seems,if there is no possibility to set one of the profiles up,they can only be changed,deleted or newly created.Is there really no place to force it to the required settings?Under the good old KDE3.5,it was no problem,to get it work like I want it to.My 64-bit system runs under openSUSE 11.3 and KDE 4.4.Is here any salvation for my nerves
I have had my thinkpad for just a few short months and, it must be that we are heading into summer, but I am starting to finally run into some overheating issues especially when compiling software for awhile, i.e. kernel.
My question would be, "Is it best to let the built in thermal management take care of the issue, and I just need to know what to tweak, or to put on a script solution such as the tp-fancontrol script?
The computer takes about 5-10 minutes to overheat and the message I get in /var/log/messages is "logger: ACPI group thermal_zone / action THM1 is not defined" then it shuts down.
So, any pointers in the right direction would be appreciated.
I am running slackware-current x86_64 on a Lenovo Thinkpad T500.
I just switched from XUBUNTU to fedora 10 and have to say I will most likely change back. Unless someone can tell me how to speed up the internet connection in fedora. I have tried wireless and wired and it doesn't matter which I use the download rate is painfully slow. With wired I get a meg every minute. It really hurts to watch the monitor.Downloads for three seconds then takes a break for eight seconds then downloads for three more seconds and this goes on and on. I have a very fast connection and am used to getting amazing unbroken streams of data at no less than 1 meg every 2 seconds. I hope this is a rectifiable situation.