I have HP 620 and i installed Fedora 14, but my wireless card doesn't work. My card is:02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvA Wireless LAN Controller (rev 10) Under Live Ubuntu the card works very well, but under fedora doesn't work.It's look like the fedora doesn't a driver.
I have a Toshiba Satellite series laptop, i get ubuntu on it, all works well but there's a problem, my wireless card doesn't work, it doesn't show me the aviable wireless network, my Wireless Card is an Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) but it works in windows. I used Ubuntu 8.04.4 LTS. When i run these codes that's what it shows:
I have an issue with wireless connectivity on my laptop. Its a HP dm3 and the intel network adapter is supported as I can scan and detect wireless access points.However, when I attempt to connect to my home network, it fails and this is probably a result of two things: The BSSID is missing and/or the DHCP client ID is missing.I am running Kubuntu 10.10 32 bit
Yes, that's correct, it's a Celeron 400 running Xubuntu. And the card was working on 9.10, but not working anymore in 10.04 neither in 10.10.I've no other idea and I'm really considering moving back to 9.10Is there anything else I can check.
I'm trying to activate a wireless network on an ubuntu server 10.04. The machine has a TPLink PCI wireless card. Card is well recognized, and scanning for wireless connection it finds correctly the essid of the access point in the room. But when I try:
Code: $ sudo iwconfig wlan0 essid "apoint" key s:my_key_8 this error is returned: Code: Error for wireless request "Set Encode" (8B2A) :
SET failed on device wlan0 ; Invalid argument.I looked for similar situations over many forums, and I found that it could be the card doesn't support the encryption type (My AP uses WPA with TKIP). However if I use an ubuntu desktop live CD on the same machine, I can connect witouth any problem with NetworkManager 0.8.
I'm very new to Debian (and Linux in general), and am currently taking a Linux course at college... I'm trying to get Debian running on my MacBook Pro (late 2009 model) and it's been complicated but I've got the operating system installed on it... I'm just having a few problems, the biggest right now of which is my wireless card, which doesn't work. So, I found instructions on the Debian Wiki for getting the driver for it, but it's not compiled already and I have little knowledge of manually installing stuff through Linux...
I have a Dell inspiron 1420 and its set up as a dual boot. Windows/Fedora.I cant get the wireless card to work. I review some previous posts but still cant get it working.
I did a /sbin/lspci Network controller: Broadcom Corporation BCM4310 USB Controller (rev 01)
I did $rpm -q b43-fwcutter b43-fwcutter-011-3.fc9.i386
Recently I have installed Fedora 14 on my other laptop. It's a dual boot with Windows 7. Everything worked perfectly fine, networking included, until my friend didn't accidently turned off the wireless by pressing a wireless button on the laptop. Since then the wireless on Fedora doesn't work. It does on Windows thought. I've tried restarting the laptop few times, but the wireless still doesn't want to work again.
my cisco wireless card model # wmp600n. Fedora doesn't even recognize that its there and i haven't been able to find any linux drivers for it, tried installing the driver using wine but still isnt working for me...
i'm new to linux, and recently installed fedora 14 on an old hp pavillion dv2700. it originally had vista home premium, but the hard drive crashed and had to be replaced with a new one, which had no os on it. i installed fedora several days ago, and everything worked perfectly until a day ago when suddenly the wireless card wouldn't turn on anymore.
my sister was using the computer (just videos) and a few seconds after she handed it back to me, the wireless light turned from blue to amber, and it said wireless was diabled, even though i hadn't touched the switch. before the computer crashed, it had a problem of the light always being amber when it woke up from standby, but flipping the switch off and back on would fix it. now no amount of wiggling and flipping seems to do the trick.
I am looking for a wireless n card that will work "out of the box" on Fedora 14. I have a wireless card that i have to compile the drivers, the problem is getting the packages that are needed to compile, without internet. so does anyone know of a card like this. (has to be usb because i do not have a free pci slot)
I want to connect my modem straight to my fedora 13 box, using it as a firewall, and I want to use my wireless card to set up an ad-hoc to give internet to the windows computers in my house. My router has been messing up and I am trying to create a quick fix until I can solve the problem.
My eth0 has internet connectivity but when I use the brctl command to try to create a bridge it doesn't let me add my wireless card, wlan0, and also I lose internet while my eth0 is in a bridge. I am fairly new to Linux.
Got new keyboard yesterday. Could easy set up it when was logged in. After reboot it doesn't work at all. Running fc11-2.6.32.21. Has anyone have any ideas / solutions?
I've currently got the beta of fedora 12 installed, hope to upgrade that once the final release comes out. I'm having so many problems getting wireless to work. I've got a edimax ew-7711utn wireless adaptor. It doesn't work. Really what I want is to take it back and get a wireless card that will work.
I'm running Ubuntu 10.04 Server. I can't get my Wireless Card & Wired Card to work at the same time. My interfaces file is incorrect, when I comment out 1 of the interfaces the other works. I have attached my interfaces file.
I just got myself a Dell Inspiron 1440. And decided to install my favorite distro Debian. I got the installation to go with no issue and all seems to be working fine. However the wireless isn't working. NetworkManager doesnt even detect a wireless card. I followed the instructions here and installed the b43-fwcutter and then issued the modprobe b43 and modprobe b43legacy commands. Then I issued the iwconfig command and this was the output.
[Code].....
Also, I've been doing some research and found out about some file located /etc/udev/rules.d/70-persistent-net.rules. So I looked in mine and found out that only my eth0 is added.
when it comes to openSUSE but I am earnestly trying. I installed the openSUSE OS on my HP dv6000 laptop, but it does not seem to recognize my wireless card (which is a Broadcom 4311).
I am a convert from Ubuntu (9.04 kept freezing on my laptop; when it did work, many packages it seemed were outdated--ie only Eclipse 3.2, rdesktop was messed up [and apparently is also in Fedora]), and I am having some trouble with getting my wireless working.I am running Fedora 11.First off, there is a problem when trying to connect when using DHCP. NetworkManager gets to the second green dot, and then after a short while I am given a message that the connection was disconnected.
Configuring the interface manually, not using DHCP, allows the connection to complete. However, the internet is very slow. There is a 15-30 sec delay before website loading actually commences, and then another delay each time an ad must be fetched from another server.How can I fix this delay? I know I have encountered it in earlier versions of Ubuntu, but I can't remember how I fixed it.About the rdesktop problem, if anyone is able to help [maybe I should post another thread?], the cursor color (the color of the pointer) is inverted---where it should be white it is black, and where it should be black it is white. I use rdesktop a lot to connect to my terminal server in my basement. Any idea how to fix it?
Sorry for repeating the same old complaint but there doesn't seem to be a common fix: Wireless does not work on my Presario R3000 although SUSE 11.x lists the hardware in the Hardware Information list and the hardware is turned on. Network Manager doesn't display any wireless networks in SUSE while Win 7 can see 4 of them on the same machine. Ubuntu has no problem either
I installed opensuse 11.3 succesfully on my acer aspire 5670 (5672) laptop. Everything works except wireless connection. Looking for a solution is follewed the " My wireless doesn't work - a primer on what I should do next" guide on this forum. These are the results i become: (2) Determine what device you have.: 03:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
I have a Belkin Enhanced Wireless USB Network Adapter Model # F6D4050 v2. The drivers are for windows but the windows wireless drivers app doesnt work. I see a tutorial for a linksys that appears to have the same chipset, but I am not sure if any of the steps need to be modified, also my kernel is a bit different. Here is my kernel:
just installed ubuntu but it doesn't recognise my wireless card. I'm running an emachines g720. Ive tried looking through some previous posts but the terminal thing frightens me to death really.I've tried looking through the idiots guide but i'm afraid i'm a better idiot than that.
I've got problem with my computer, any graphic card working under AGP port and any Linux based system.When I start my system with my graphic card in port AGP, the kernel panic appears.I tested on Linux: Ubuntu, Debian (few version from 7.10 to 9.10), Mint, OpenSUSE 10.3, 11.0), DSL. Always has been crash with kernel panic. Both live versions and installed tested.Working fine only on Linux Slitaz.I tested on GeForce4, GeForce2 and some old GPU from ATI. Computer works fine on built-in GPU Intel Extreme Graphics 2. Everything is fine under MS Windows. No problems. But I don't want to use Windows.
Little help needed. just installed ubuntu but it doesn't recognise my wireless card. I'm running an emachines g720. Ive tried looking through some previous posts but the terminal thing frightens me to death really.
I've tried looking through the idiots guide but i'm afraid i'm a better idiot than that! Some nice simple paint by numbers instructions would help me alot if at all possible.