Fedora Hardware :: Video Card Intel Doesn't Recognize Screen
Jan 16, 2010
i bought a new laptopt Gateway, core i3, intel video card. I've tested ubuntu and mandriva without good video results. I have installed Fedora 12, i'm using an external lcd samsung screen on the vga port, it works fine. My display properties shows two screen as well as the correct resolutions...the problem it that i can't use my latopt screen, i have tried different resolutions..but nothing. I can't use mi laptopt without an external screen.Even if i boot without my external screen, my laptopt screen goes black.
So the only experience I have with Linux is all from Ubuntu, and I just spontaneously decided that I needed a change...two days later my triple boot Macbook Pro got slimmed down to a dual boot OSX/OpenSUSE 11.2 machine. But there are some general problems, and I have absolutely no idea how to solve them. First, wireless isn't recognized at all...there isn't even a space for wireless connections. Second, I haven't been able to get compiz to work yet, and I can only suspect that the system doesn't recognize my video card, or the driver isn't installed. Yet again, no idea how to fix this.
I have been waiting on installing ubuntu on my mid 2010 MBP 15' for a while now. I was wondering if the dynamic GPU switching was supported yet. Does Ubuntu recognize the intel card and can I use it over the nVidia card?
Here goes the problem: I have a Amilo M7400 notebook with an Intel 82852/82855 GME video card, and X is a bit uncompatible with it.I've tried using the vesa driver in the xorg.conf, but when i start Xserver, it hangs hard in a blank screen. I can't open a new terminal and control+alt+backspace won't work.
what can i do? is there a log file for X which details the initialization of it?
i had an nvidia geforce 6800 card in my pc and that just all of a sudden stopped working (the screen went blank) so i went to my onboard video and it works but no matter what video card i install, it doesn't work (still a black screen) and i know the cards work on other pc's but just not this one. i've tried different ati cards and nvidia cards with no luck. i've also wanted to disable my onboard card all together but my bios doesn't have that option for some reason. i also thought that it might be the slot but when i install the video card in the pc, the fan works so it's not that.
my cisco wireless card model # wmp600n. Fedora doesn't even recognize that its there and i haven't been able to find any linux drivers for it, tried installing the driver using wine but still isnt working for me...
I recently installed Fedora 12 and have tried it in different machines with different results. I am using HP laptops and can boot with no issues in one of them (HP NX7200), boot with compiz limitations in another (Compaq 6910p) and almost never get a proper boot on another (HP EliteBook 6930p). This last one is the one I want to check on, because even if I have got it to boot properly, most of the time it fails. I get to the login screen OK, but when trying to load the desktop, it usually fails and sends me back to the login screen. The driver in use is i915. I have tried to generate an Xorg.conf file and add a specific option, which I got from other people having the same issue. Here's the display section from my xorg.conf file:
Looking into the last few lines from my Xorg.0.log file, I could see segmentation faults and messages that showed how the server was killed and the system would drop it. ometimes I can get this machine to boot (in fact, I am typing these lines from it). To achieve that, I run
su -c system-config-display
on one of the other laptops that work. That allows me to boot fine at least initially. Every time I get that right, I get a kernel crash message, which reports the following:
------------[ cut here ]------------ WARNING: at drivers/pci/dmar.c:616 check_zero_address+0x7d/0x191() Hardware name: HP EliteBook 6930p Your BIOS is broken; DMAR reported at address zero!
If I reboot/shutdown, I won't be able to boot again until I repeat the same workaround.
For those who want use in VMware guest 3D games or any, using intel graphics... (who cant enable it ) You must enable S3TC texture compression even if your card can't enable it!The software you must use is DRICONF... You can Download it at the package manager...
I am using a Dell Latitude E6510 with QM57/QS57 Intel GMA HD chipset video card, when I am installing the Fedora 14, if I choose the 'Install the new system or update an existing system', it goes to blank screen.if I choose the 'Install system with basic video driver', it starts to install.BUT I cannot use the desktop effects, the Stellarium, etc, it says that 'accelerated 3D graphics is not available'. Even I have updated my kernel to 188.8.131.52-91.fc14.i686. As far as I know, QM57 do support a 3D graphics, what should I do to drive it to work.
just installed ubuntu but it doesn't recognise my wireless card. I'm running an emachines g720. Ive tried looking through some previous posts but the terminal thing frightens me to death really.I've tried looking through the idiots guide but i'm afraid i'm a better idiot than that.
I have a sandisk sd card with 3 partitions two ext2 and one fat 32 partition for some reson Ubuntu only automounts two ext2 partitions. I've tried inserting another card with only one fat32 partition and the system doesn't mount it. Both cards are visible in gparted byt not in "Places" menu.
I'm running Joli Cloud 1.2 on my HP dm1z netbook and for some reason, it doesn't seem to recognize my wireless card. Because the HP dm1z has no ethernet port, I had to use a USB adapter to connect to the internet.
I have recently installed Karmic to a portable hard drive (WD elements 500gb) so that when it is plugged in the grub can boot and i can go into ubuntu 9.10 and when it is out windows 7/vista dual boot screen shows. When in ubuntu, there is no driver for my 'NVIDIA GeForce 9200M GS' graphics card available so i am stuck with the no effects mode and the games are poor.
Previously i had this same setup (but with jaunty) and the graphics card worked well, i could have all the wobbly window effects etc, but now i can't have anything.How could i get a driver for this?BTW, it is running through USB 2.0, although it is very fast.
I have an Acer Aspire 5516 and have been running ubuntu for a while. I couldn't resist the upgrade notice to 10.04 so I did it. Unfortunately it doesn't seem to recognize my video card ATI Radeon X1200 and I have to boot in safe graphics mode. I can use my computer but the display is a bit off. I have tried to install the ATI driver but get the following:
ATI Technologies Linux Driver Installer/Packager Error: ./default_policy.sh does not support version default:v2: x86_64:lib32::none:2.6.31-14-generic; make sure that the version is being correctly set by --iscurrentdistro Removing temporary directory: fglrx-install.eqUOxU
Lucid has been good to be so far, except for the fact that my screen flickers occasionally (I'd say once or twice every 30 minutes) I'm using an ASUS laptop with an INTEL GMA 4500MHD (It's this laptop. I read a bug report about the xserver-xorg-video-intel, but the issue was much more severe and marked as solved before Lucid was released.
i just install ubuntu 10.4 linux 32.bit on my Pc and it's was running fine beside the video card (intel x4500 ) not supported in ubuntu anyway after i update about 251 package in ubuntu ,i restarted the pc after in the grub ...they show me 4 Ubuntu ! 2 for boot ubuntu and 2 for ubuntu recovery and 1 for windows 7 loader !
I have an ATI Radeon 9000 Graphics card that Ubuntu 9.10 doesn't seem to recognize no matter what I do. Knowing that its an older card and that ATI stopped support for it a while ago, I was wondering if anyone knows if I would have better luck on Ubuntu 8.04. I can't get 3d or opengl to work, or install the correct ATI Driver.
I have a problem with my Grundig's (model GNB-250D) laptop wireless card. I recently installed Ubuntu 10.10 and tried to use a wireless connection to browse the internet but it didn't detect any, it seemed strange as it worked perfectly on Windows. I can browse the internet fine if I use an Ehternet cable.
Just installed Ubuntu 11.04, and everything is perfect, except my video card. Ubuntu 11.04 refuses to run my labtops integrated Intel 855GM video card in OpenGL hardware accelerated mode. Everything is really slow/unresponsive compared to earlier versions, windows are rendering painfully slow etc. From what I can gather, problem is, 11.04/newest Compiz is OpenGL 1.4, and my video card only supports 1.3 (?). Now, I have tried downgrading Compiz following this link: [url]
No luck so far.. OpenGL is still software only. Do I need to edit some ini-file or xorg.conf, or am I missing something here?
I have both pigeon and empathy working on my laptop, and can chat in both, but i have been wanting to activate my video for both, but apparently it doesn't recognize my webcam. It seems strange as i have skype working perfectly on my system, and can use the video option in it without any problem, so it cant be that my webcam isnt recognized. does anyone know how i can get my webcam working in either or both of these instant messengering services.
Just installed Karmic Koala on my Intel Macbook via Virtualbox and cannot get wireless working. Previously did this with 9.04 and everything worked. Do I need to use ndiswrapper? I don't remember having to do that before.
If I take out the existing video card and put in another one of a different type (but not a different brand), how does Ubuntu behave? I know what Windows typically does. Windows starts up the screen using a default video driver which is at least 1024 by 768 and then asks you what this new bit of hardware is and asks where the drivers are. I'm pretty sure Ubuntu has default drivers of its own, but I don't know what their resolution is.
i installed Fedora 12 on an external hard drive. Everything went fine with the installation and it was working perfectly until i tried to install my video card drivers. I have done this many times before and it has worked. I have an ATI card. Anyway after installing the driver i rebooted and now when it starts it show the loading bar on the bottom but then nothing happens its just a black screen!. The worst part is that when i go into windows and my external is plugged in windows wont read it and i have very valuable data on it. I go into disk management and it shows up but windows says that its empty. which is obviously not true because Fedora starts to boot. I really just want Fedora off my external and for windows to read my external with all the files still on it. Is there a way to get by that blank screen?
I just installed Fedora 12 on a rack computer. I know my screen has the ability to show 1600x1200 pixels. But I don't know what my video card can do. Right now my screen is stuck at 800x600. When I had Fedora 11 I remember it could go to 1024x768 or maybe a little larger. I can't really find a driver for the ATI RageXL, How to make the screen resolution as high as possible.
I'm having trouble getting X to work after switching from onboard intel video to a 5000 series ATI card. Apparently I need to switch to a MESA or fglrx driver. I did a sudo apt-get install fglrx-driver and it installed but still no X. I'm currently using Karmic. I've tried to boot with a live CD which works fine and changed the xorg file manual but that was a mess.
When I start I get a checking battery state ... done and it stays there forever sometimes and sometimes I can login but without x. Typing startx gives me a long list that says check the xorg website. I've been looking around for a way to fix this and haven't been able to get it working.