Fedora Hardware :: Microsoft Tempest Habu Mouse + Other HW - Error Communicating With The Device

Mar 25, 2010

Fedora
Release 12 (Constantine)
Kernel Linux 2.6.32.9-70.fc12.i1686
GNOME 2.28.2
[Code].....

OK so I installed Razertool but when I try to configure it, it says: There was an error communicating with the device: Operation not permitted You may need to change the permissions of the device (see the README)

and in the GUI it reads: FIrmware Version ?.?? (NO DEVICE) As for other things like CPU and Graphics, how can I confirm these are running properly? My computer seems to lag a bit. As for graphics, everytime I try to enable the desktop effects it errors and says: Accelerated 3D graphics is not available

View 4 Replies


ADVERTISEMENT

Fedora :: Microsoft Wireless 2-Button Mouse Wheel Scroll Not Working - 15 Gnome 3?

May 28, 2011

Every single thing is working just AMAZINGJust the mouse scroll is not working at all

View 7 Replies View Related

Ubuntu :: Microsoft Intelli Mouse 3000 Confiruration In 10.04?

Nov 14, 2010

I'm trying to configure my Microsoft Intellimouse 3000 in Ubuntu 10.04 and am not really having any luck. Basically all I want is to have the thumb button set as my back command. And of course if that's easy then I would want to assign commands to all buttons.

View 1 Replies View Related

Debian Hardware :: Microsoft Designer Bluetooth Mouse System Hang When Pairing

Aug 1, 2015

Just picked up a Microsoft Designer Bluetooth Mouse.Whenever I try to pair it, my system hangs and I have to hard power it down. The mouse is Bluetooth 4.0, but my Bluetooth connectivity is provided by my Intel Wireless 3160 card which does support Bluetooth 4.0.I'm using Blueman as a front end, and one other thing of note is that it shows as "Unknown" after a scan.If I need to return it, I need to return it, but it seems like a good mouse and I'd like to keep it if I can make it work.

I've took this out of syslog:
Code: Select allAug  1 14:58:04 Noah-LEMUR kernel: [  317.772054] BUG: unable to handle kernel NULL pointer dereference at 0000000000000398
Aug  1 14:58:04 Noah-LEMUR kernel: [  317.772090] IP: [<ffffffff81569f7e>] mutex_lock+0xe/0x30
Aug  1 14:58:04 Noah-LEMUR kernel: [  317.772113] PGD 0
Aug  1 14:58:04 Noah-LEMUR kernel: [  317.772123] Oops: 0002 [#1] SMP

[code]...

View 0 Replies View Related

Fedora Hardware :: Rtl8187/fedora13 - 64 - Not Communicating - Cant Browse

Aug 24, 2010

I have ALFA awus036h wireless usb card which uses rtl8187 driver. after connecting it to my fedora13(64) machine and adjusting wicd preferences to enable wlan1 , i get the card connected to my wireless network, but actually cant browse any web site( the browser keep saying : looking up www.......), also PINGing return nothing. i tried handling the card using the built-in driver (kernel 2.6.33.6) and the driver shipped with the card, but both gave me the same result.

View 14 Replies View Related

Fedora :: Gsoap - Limit Or Disable The Ability Of The Program To Open A Port To Start Communicating On FC15

Jul 18, 2011

I'm running Fedora 15, and am trying to run a program that uses gsoap/soapcpp2 2.7.17 to communicate with different parts of the program. As far as I know everything has compiled correctly and I am using the same versions of the required libraries as several working installations. However, every single time the program tries to open a port, the program is unable to do so. This happens no matter what port I specify.

if there is anything in fedora that would limit or disable the ability of the program to open a port to start communicating. I have tried disabling the firewall with no change to the behaviour.

View 1 Replies View Related

Red Hat / Fedora :: Install Microsoft Office 2007 In 14 Through Wine - "installation Stops Due To An Unexpected Error"

Apr 21, 2011

when i am trying to install microsoft office2007 in my fedora14 through wine, after 75% progress installation stops and an error message appears. "installation stops due to an unexpected error" but in any way i want to install it on fedora14. its a 'do or die 'condition so anybody can give me informations.

View 6 Replies View Related

Fedora :: Error: "Error 11: Unrecognize Device Strong

Mar 17, 2011

So I've tried some hours ago to install the new kernel 2.6.38 and when I did the reboot, it prompted this error: "Error 11: Unrecognize device strong

Press any key to continue..." I know this is such a general question but how to install the new kernel with Fedora 14? I think I did compiled and configured it ok and did something that wasn't recognized by grub or perhaps when I ran the command to make the new initrd.

View 6 Replies View Related

Ubuntu Installation :: Server On Microsoft Virtual Server - Error: Hypervisor Error.JPG

Sep 8, 2010

I've been trying to install Ubuntu Server onto Microsoft Virtual Server at the request of my boss, and I've been having an issue I cannot seem to work around. Now my background on Ubuntu and linux in general isnt amazing, I have configured server at home to act as a file sharing platform and a media server, but thats about it.

Now I've gone to install it on the MVS at work and once the install completes, I recieve the following error: Hypervisor error.JPG

I've tried running the install but limiting the resolution, but from what I can rememeber server doesnt install the GUI to start with, so it should just be showing me the standard CLI.

View 1 Replies View Related

Red Hat / Fedora :: Buffer IO Error On Device /dev/sdb?

Jul 20, 2010

I have a one problem when i mapped a SAN to the linux box RHEL 5.3 i show the following messeage Buffer IO error on Device /dev/sdband unable to find it in fdisk -l

View 2 Replies View Related

Server :: Send And Receive Time Out Error In Microsoft Outlook?

Dec 21, 2010

the mail server being used in my office is qmail. now i have received some complains from people that they are getting time outs while sending or receiving mails in their email clients like microsoft outlook.

View 6 Replies View Related

Fedora :: Error 12: Invalid Device Requested - Win 7 + F11

Dec 4, 2009

I have installed Windows 7 followed by Fedora 11. Everytime I install Fedora 11 with Win 7, the first to boot, I get BOOTMGR missing. Later I used "df -h" command to see the disk file usage fdisk -l" to see the info regarding Disk Partitions. Went into the /boot/grub/menu.lst and modified the order. I set the partition where I find the bootmgr.exe.mui, there was another file named "memtest.exe.mui in the same file.

I navigated to the above said through Fedora 11. Located inside the Win 7 installed directory /boot/en-US/

When I changed the menu.lst file, I get a new error Error 12: Invalid device requested when I tried to boot Win 7. Does that mean that Fedora 11 GRUB is not getting the bootmgr.exe.mui since its 2 levels inside the boot directory ??

View 2 Replies View Related

Fedora :: Usb 2-1: Device Descriptor Read/64, Error -62

Apr 23, 2010

I tried to get 3d hardware support in my FC12 install. I grabbed the latest appropriate drivers from the nvidia website for my Geforce 6800 XT graphics card. I changed the inittab file to boot to command line, ran the .run file as root and ran into a couple errors doing so.

I then proceeded to use yum (which i do like but this is a bad scenario for me thus far) to update my drivers to the suggested kmod-nvidia drivers that exist out there. Once all of the installation was completed I rebooted and got the following error displayed at the top of my screen after the fedora loading bubble disappeared. The system just seems to hand at this point....

"usb 2-1: device descriptor read/64, error -62"

I did a hard boot on the machine and tried again, this time i pressed the esc key to watch the interactive startup screen and noticed that after "enabling local filesysem quotas: [ OK ]" i get a

***Warning -- SELinux targeted policy relabel is required.
*** Relabeling could take a very long time, depending on file
*** system size and speed of hard drives.

This will continue with asterisks across the screen until eventually it stops and then I am stuck as to what to do from here on out. What could possibly be causing all of this mayhem?I have tried to use the fedora core 12 install cd to launch it into "rescue mode" and from the bash command line proceed with modifying my grub.conf to not use the "newly installed kernel (2.6.32.11-99.fc12.i686)" that was installed with yum during my kmod-nvidia driver installation.

View 1 Replies View Related

Server :: Lifekeeper Error - DEVICE FAILURE On SCSI Device - /dev/add

Sep 17, 2009

Since May 12,2009. Our system lifekeeper has the error log "lifekeeper error: DEVICE FAILURE on SCSI device '/dev/add'", but it ran normally. Until last week, it failover to the standby server. The disk still running, the error still come out.

View 3 Replies View Related

Fedora :: Kernel: Buffer I/O Error On Device Dm-0, Logical Block 124

Nov 28, 2009

I have 2 hdds, with encrypted / and /home. Besides there are four other (encrypted ext4) partitions I use rarely. In Fedora 11 at boottime I gave the luks passphrase for / and home and the system booted as intended.

Whenever I needed those extra encrypted partitions I mounted them in Nautilus. Now, in Fedora 12 at boottime dracut tries to open all the encrypted partitions, / and /home are mounted fine, but opening all the other partitions gave the following messages in messages.log:

Quote:

dracut: luksOpen /dev/sdb6 luks-02a0e706-a26f-4019-a2a0-88a0366a994d
kernel: Buffer I/O error on device dm-0, logical block 124
kernel: device-mapper: ioctl: unable to remove open device temporary-cryptsetup-304
kernel: Buffer I/O error on device dm-0, logical block 124
kernel: Buffer I/O error on device dm-0, logical block 124

[code]....

...and these messages are repeated with the other partiitions, and the boot time takes very, very long. How can I tell dracut to ignore those extra encrypted partitions at boottime?

View 8 Replies View Related

Debian :: Communicating From One Terminal To Another?

Aug 6, 2011

I created a custom trap in my bashrc that will run a command in all open terminals. The problem is, after the command is executed, the cursor isn't preceded by the bash prompt (i.e., PS1); it's just on a blank line. If I hit Enter, I get the bash prompt back.

I've tried some basic things like echo -e " " > /dev/pts/1 with no luck. I also tried to see if there's a signal associated with the Enter key because then I could have sent the signal to all the terminals, but I didn't find a signal like that.

Is there a way to send a keystroke to another terminal, so that it thinks that I hit the Enter key directly in it?

Or, if this is easier, is there a way to get the terminal to print out PS1? Echo will just display its contents, but won't evaluate, and eval can't evaluate it.

Ideally, I don't have to install a package to get the behaviour I want. Is there anything built-in

View 8 Replies View Related

Fedora Installation :: F10 Live CD Buffer I/O Error On Device Sr0 Logical Block?

Jan 29, 2009

Create symlink /dev/root and then exit this to continue the boot sequence.

Buffer I/O error on device sr0, logical block *******
sr 4:0:0:0 [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sr 4:0:0:0 [sr0] Sense Key : Medium Error [current]
sr 4:0:0:0 [sr0] ASC=0x10 <<vendor>> ASCQ=0x90
end_request: I/O error, dev sr0, sector 1395920
Clocksource tsc unstable (delta = -499902943 ns)

loops that during install. new hard drive fresh out of box. WD 320GB 7200 Toshiba Qosmio intell core duo i've installed with this same disk before previous hard drive died. installed over windows vista. this time im trying to install solo no windows disk to reinstall with, F10 only. I've tried other distros as well, Mandriva one 2009, Dreamlinux, and this one. i've suspected hard drive controller went out but i can format and partition the drive. also the cd/dvd drive is bad but im booting from cd fine. tried removing the cd drive and booting from an external usb cd rom, same errors.

im about to deploy and need my computer up and running ASAP. 7 months no entertainment is not good. when i use a linux boot disk from Ultimate Boot Disk (UBD) i get an error of - hda status no response and something about invalid heads dreamlinux pushes past the error till i get the error about cant start x server. about my graphics

View 1 Replies View Related

Fedora Hardware :: Get Scanner Working In Brother DCP-385C - Error During Device I/O

Sep 1, 2009

I have recently installed Fedora11 and have managed to get the printer side of the above multifunction machine working but not the scanner . The computer recognises the scanner and sane, xsane, sanelib's etc are all installed . When I try to open it it gives the following:

Failed to open device 'brother3:bus5;dev1': Error during device I/O

View 6 Replies View Related

Fedora :: Vpnc Not Connecting / Error Can't Open /dev/net/tun, Check That It Is Either Device Char?

May 30, 2011

i need to install vpnc in amazon ec2 fedor 8 instance. i have installed with yum install vpnc commaned. And i have placed config file in /etc/vpnc/some.conf. but it is not connecting and giving the following error.
vpnc: can't open /dev/net/tun, check that it is either device char 10 200 or (with DevFS) a symlink to ../misc/net/tun (not misc/net/tun): No such device.

View 6 Replies View Related

Fedora Installation :: Error Creating Partition - Device Or Resource Busy

Jul 19, 2011

So I cant seem to be able to install fedora 15. I think it is the disk. I have windows 7 already installed (and would like to keep it) It was installed on the end of the hard drive leaving a 100 GB chunk in the center of the drive open and unformatted (this may be the problem). Anyway I used the live cd and tried to format the unformatted partition to exf but it gives me this error

Code:
Error creating partition: helper exited with exit code 1: In part_add_partition: device_file=/dev/sda, start=105906176, size=104752742400, type=EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
Entering MS-DOS parser (offset=0, size=500107862016)
MSDOS_MAGIC found
found partition type 0xee => protective MBR for GPT
Exiting MS-DOS parser
Entering EFI GPT parser
GPT magic found
partition_entry_lba=2
num_entries=128
size_of_entry=128
Leaving EFI GPT parser
EFI GPT partition table detected
containing partition table scheme = 3
got it
got disk
new partition
added partition start=105905664 size=512
committed to disk
Error doing BLKPG ioctl with BLKPG_ADD_PARTITION for partition 2 of size 105905664 at offset 512 on /dev/sda: Device or resource busy

Do I have to reinstall windows for this to work or is there something I can try to do.

View 2 Replies View Related

Fedora :: Error - No Root Device Found. Boot Has Failed, Sleeping Forever

May 7, 2010

I have a Feadora 12 Live CD. It booted up fine on my 700 Mhz computer. I've since then put a new HDD in with which I intended to install Fedora on. But now i get this message

Quote:

No root device found. Boot has failed, sleeping forever

What does this mean? How do get the Live CD to boot?

View 1 Replies View Related

OpenSUSE :: HPLip Stops Communicating With Printer?

Feb 10, 2010

Everytime I get HPLip working with my printer, it will only work until I shutdown the computer. On next restart, it no longer works and the only way to get it to work again is to delete the printer configs in hplip and re-create them!

View 2 Replies View Related

OpenSUSE Hardware :: Communicating With Apple Ipad?

Sep 2, 2010

I have been given a present of an Apple Ipad. Does anyone know if it is possible to get the Ipad to communicate with a PC running SUSE 11.3 instead of a Windows PC and if so how do you go about it?

View 1 Replies View Related

Programming :: Communicating From Subshell To Parent Shell

Mar 17, 2010

I am stuck at a issue in shell scripting. I had tried all the possible ways, yet unable to reach a solutions. I am working on a application, which runs on C shell. For this I had created a installation script, which installs my application in the system, it is working fine. Now, the problematic part is that I had set an alias in ".cshrc" file, which invokes my application when any user types it. But for an alias to take effect, I need to re-login into the system, because I have to read ".cshrc" file again, in order to take effect of my alias. However I can use "source ~/.cshrc" file after my installation, so that my aliasing works without logging back again. But Requirement is that, just after installing the application, alias should be available to user, without logging back again and without issuing any extra command.

I had tried one other way is that, I had created a symbolic link in ~/bin directory, which points to my application to be run, but even that require, to issue rehash command in order to modify internal command hash table. So, my overall problem is that changing alias in subshell should be reflected to parent shell,without running any other command (all commands should be run in installation script only). Or, in other way how to rehash parent shell from subshell. The ultimate requirement is that,the command that will run my application, should be available just after executing the installation script, either by aliasing or by rehashing, or by any other means.

View 9 Replies View Related

Programming :: IPC Command - Does Not Shows The Processes That Communicating To Each Others

Sep 28, 2010

The ipcs command shows the facilities of IPC in Linux, but it does not shows the processes that communicating to each others. How can I list the processes, which is currently communicating in IPC ?

View 6 Replies View Related

Fedora :: Error "unable To Access Resume Device (LABEL=SWAP-sda8)

Mar 7, 2010

I have FC6 system with kernel 2.6.22.14-72.fc6 When I rebooted my system, I got error message "unable to access resume device (LABEL=SWAP-sda8) then it went to fsck automatically to all the partition and then stop (failed)

Checking filesystems
/1:clean, 10543/2560864 files, 204494/2560359 blocks
fsck.ext3: unable to resolve 'LABEL=/backup'
/boot: clean, 155076/19546112 files, 13456168/39072080 blocks

[Code]...

View 14 Replies View Related

Fedora Installation :: Livecd Cant Burn Correctly / Buffer I/O Error On Device Sr0 Logical Block 352328?

Oct 3, 2009

i've just burned a livecd (fedora 11), but it doesn't work correctly.it says after i hit boot:

BUFFER I/O error on device sr0 logical block 352328

and then something else, which is similar so i didn't write it down.i read on bugzilla, that is should try to append the boot command with pci=nomsi, but it doesn't work for me

View 3 Replies View Related

General :: Can't Find Boot Device - Error "Unable To Determine Major/minor Number Of Root Device"

Mar 17, 2011

I just compiled my first own kernel (I'm using Arch Linux), following the tutorial on the german site. Now I tried to boot it, I ended up failing with this message: Code: Waiting 10 seconds for device /dev/sda1 ... Root device '/dev/sda1' doesn't exist, Attempting to create it. ERROR: Unable to determine major/minor number of root device '/dev/sda1' Here is the important part of my menu.lst:

[Code]....

I simply copy&pasted the Arch-entry, i.e. I also had the disk by uuid there. The failure message was the same, just the root device name was the different name Also, at first I did not have the initrd line in my menu.lst (as written in my tutorial that I may not need it). In this case I had this error message:

[Code]....

View 10 Replies View Related

Debian Hardware :: Mouse Tracking Error - Mouse Not Tracking Correctly

Jan 8, 2011

I had been running "Etch" and upgraded to "Lenny". Now my mouse is NOT tracking correctly. When I move the mouse and then press and release the 'ctrl' key to show where the mouse pointer is the circle indicators are not where the pointer is. I therefore cannot make any selections from menus as 'lenny' thinks the mouse is somewhere other than where the pointer is. Also are there keyboard hot keys that i can use to access the menus?

View 1 Replies View Related

Networking :: Communicating On The Wireless Lan - Complex Usage Of Ssh Port Forwarding

Mar 5, 2011

I am having trouble with computers communicating on the wireless lan. However, if I ssh into the wireless access point and then ssh into another computer on the wlan, that works fine. The draw backs to that is I am restricted to only ssh and without X forwarding. So what I would like to do is set up ssh port forwarding so that computer2 with vnc server 5900 on the lan will be accessible through 40000 on mycomputer using the wireless router's ssh as the go-between with ssh port forwarding. How can I accomplish that? Every time I read about this, I think I understand it, and but then I must have done something wrong because it's not working the way I thought. I have successfully done ssh port forwarding in the past without using a third computer as a go between. Both the wlan access point/router and computer2 are running an ssh server.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved