Fedora Hardware :: HP DeskJet 5550 No Longer Working In F12

Sep 3, 2010

It's been awhile since I last used my printer in F12. There have been a lot of updates via yum done since whenever that last time was so I don't know precisely which update and when broke things. Attempting to use it today was a no go. It would appear to be a 'udev' issue according to last message logged into /var/log/messages.

My wife's Windows computer is connected to same printer via a parallel cable and it works fine for her so it's not a hardware failure.Consider this solved. Reason for printer failure: Major OP error. The solution was actually rather simple: sudo service cups start

View 2 Replies


Fedora Hardware :: Deskjet Plus On Parallel Port Working With F13?

Aug 19, 2010

I have an old, but still usable, HP Deskjet Plus inkjet printer that I have connected to the parallel port of my Fedora 13 box. I can (apparently) configure the printer using the usual print configuration tools, and have selected the recommend foomatic driver (HP DeskJet Plus Foomatic/pcl3 (recommended)) - but when I try to print the test page the job gets queued and nothing else happens. The jobs simply show as pending in the printer queue.

Current uri is parallel:/dev/lp0.

As a side note, my Epson printer on the USB port works fine, but it's using CUPS + Gutenprint v5.2.6 Simplified. Should I be trying something with a different (e.g. CUPS) driver, or a different way of specifying the foomatic driver, or what?

View 3 Replies View Related

Fedora Hardware :: HP 1050 Deskjet All In One - Scanner Not Working

Apr 17, 2011

I can't get the scanner to work. I get this:
[pedroski@fangshan ~]$ scanimage -L
device `v4l:/dev/video0' is a Noname USB2.0 1.3M UVC WebCam virtual device
device `hpaio:/usb/Deskjet_1050_J410_series?serial=CN0CN3H3CZ05HW' is a Hewlett-Packard Deskjet_1050_J410_series all-in-one

and this
[pedroski@fangshan ~]$ scanimage -d hpaio:/usb/Deskjet_1050_J410_series?serial=CN0CN3H3CZ05HW -T
scanimage: open of device hpaio:/usb/Deskjet_1050_J410_series?serial=CN0CN3H3CZ05HW failed: Device busy.

Fedora came with 'Simple Scan' That also returns 'device busy'. Can this scanner work under Fedora? I have tried turning it off, then on. I have rebooted. I have hpijs and hplip installed also hplip-gui. I have put myself in the group lp.

View 14 Replies View Related

Ubuntu :: HP Deskjet 3420 Printer Not Working

Jul 7, 2011

After clicking on the print option on ms -word, printer does not respond! In the print dialogue box it shows that ink cartridge empty, but even after refilling it, it shows the same status!

View 1 Replies View Related

Hardware :: Getting HP Deskjet D1600 Working With Arch

May 12, 2010

I have installed HPLIP and cups found the driver for the printer and all seemed to be setup fine. However when I tried to send a test print, cups showed the job status as stopped. If I try to send anything from Open Office, the page never prints. Not sure where to go from here.

View 4 Replies View Related

Fedora :: Yum Is No Longer Working

May 26, 2010

I just installed Fedora 13 yesterday and now yum is no longer working. I get this message when I use it. Code: There was a problem importing one of the Python modules required to run yum. The error leading to this problem was:No module named grabber.Please install a package which provides this module, or verify that the module is installed correctly.

View 6 Replies View Related

Fedora Servers :: Yum Is No Longer Working In 3

Apr 23, 2009

I am running a Fedora 3 that I had installed from a slightly outdated disk. and I have been making updates by using YUM. But I have a policy of only updating just what is needed and leaving the rest alone. This was fine until some time (I think is was) last year, when our friends at fedora had discontinued support for Fedora 3 and then unwisely deleted all the packages for fedora 3 and fedora 4 off there server. Now it has been a struggle just administer updates when application that I am adding become unhappy with the version that come off of the disk, and I end up with versions that are more current then I wanted. All I wanted is to have access to the packages that were left when the music stopped.

Hear is my current pediment. I now need to run PHP (something I never used until now) and version that came with the disk (ver 4.3.9) is too low for the scripts that I will be running. They need PHP 5. Now I know that were up to something like PHP 5.3.x. But I don't really need that. I am shore there is a version of PHP 5, like versions 5.1, that was available though YUM. If they only just left it there. At least Microsoft leaves all of there window 98 updates on there server for people to use, even though they don't support windows 98 any more.

The biggest reason I want to use YUM or even up2date for my installs and updates, is they minimized the risk of screwing something up.

Here is my question. Dos, anyone know where there is a mirror of fedora 3 updates that fedora used to have on there site?

I am hopping to be able to adjust the baseurl= line in the fedora.repo file to point it to this new mirror and make YUM work like NEW.

View 4 Replies View Related

Fedora Networking :: Internet No Longer Working

Aug 11, 2009

I have been a happy Fedora user since late in the F9 release and now use F11 32 bit.Two days ago my 2wire modem/router took a dive. My ISP sent us a Motorola 3347-02 and since then my computer will not reach the internet. I have read everything I can and still haven't found the solution! Some things that I have tried: Disable network manager and do it manual, configure static IP, wipe system and reload, installed F11 on another computer.None of these have worked.Now I am booting from Ubuntu and have no issue but I can't stand Ubuntu.

View 4 Replies View Related

Fedora :: Alt + Left Click No Longer Working?

May 9, 2010

i don't know what i changed or if i changed anything but alt + left click to drag a window no longerorks. i'm running fc12... how do i get it back?

View 3 Replies View Related

Fedora Hardware :: FC14 64bit Epsoinv350 Photo No Longer Working

Nov 6, 2010

A reinstall (several) of FC14x86_64. Epson flatbed scanner V350 that worked well in FC13 is not being recognised /no coms
USB connection

Apps: epson driver, san xsane, simple scan, iscan (avasys.jp)
[root@richard-g8jvm Downloads]# lsusb
Bus 003 Device 003: ID 0d8c:0201 C-Media Electronics, Inc. CM6501
Bus 003 Device 002: ID 0a5c:2046 Broadcom Corp. Bluetooth Device
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 014: ID 04b8:012f Seiko Epson Corp. Perfection V350 (GT-F700)
Bus 001 Device 004: ID 04b8:0007 Seiko Epson Corp. Printer
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

iscan reports
could not send command to scanner
check scanner status

View 1 Replies View Related

Software :: Installed Radeon HD 5550 Card - Now Festival Speech Crashes

Aug 10, 2010

Debian testing: $ uname -a Linux jilldando 2.6.32-trunk-486 #1 Sun Jan 10 05:53:18 UTC 2010 i686 GNU/Linux Today I upgraded my PC with a Radeon HD 5550 video card, it has HDMI o/p with sound on it. After boot up I get get the usual sounds from the mother boards onboard intel sound card EXCEPT speech. Initially I thought it would just be that alsa might be piping synth usuage to the Radeon card so I edited the alsa-base.conf file. So I added the following to /etc/modprobe.d/alsa-base.conf alias snd-card-4 snd_hda_intel

and changed: options snd_hda_intel index=0 to: options snd_hda_intel index=0,4 and rebooted, but this made no difference. Still startup sounds and sounds etc but no speech. I used the alsa project to check and these are the results: Code:


View 1 Replies View Related

Fedora :: HP Deskjet F4140 - Can't Setup In FC13

Jul 10, 2010


Can't install a HP Deskjet F4140 in FC13.

I have installed;

1. All Cups rpm's
2. Gutenprint-cups
3. All the hplip rpms
4. hpijs

And I still can't get the HP Deskjet F4140 to show up in Selection Window. I have even run HP-Setup and it can't install the F4140 . HP-Setup can see the F4140 is on USB port but can't install it.

I went to the HP website and it says the printer is Supported in the hplip drivers

View 5 Replies View Related

Fedora Hardware :: HP All-in-one Printer Model HP Deskjet F2483?

Jul 20, 2010

I have recently acquired me a HP all-in-one printer model HP Deskjet F2483. The printer works fine but am having issues getting the scanner to work. Following instructions I found to Google, this is what my shell looks like:

sh-4.0$ sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.


View 11 Replies View Related

Fedora :: Configure A HP DeskJet 812C On Local Netowrk?

Dec 31, 2010

I've installed F14 [32 bit] and trying to configure a HP DeskJet 812C on my local netowrk[lpd://] However, the "New Printer" wizard calls KPackageKit that fails and reports, "Could not find printer driver in any configured software source". It is just a dead end!

View 2 Replies View Related

Fedora Networking :: Installing HP Deskjet 3050 As Networkprinter?

Aug 7, 2011

I have a HP Deskjet 3050 printer. In the past (when i used windows) i installed this printer as a networkprinter. However now in Fedora 15 i cant get it to run.

View 2 Replies View Related

General :: Fedora 10 Setting Up HPLIP For HP Deskjet F4488?

Feb 9, 2010

I had set up a newly purchased HP F4488 using HPLIP, I installed it on my Fedora 10 desktop and it worked fine for the past 2 days. Suddenly, it is failing to print. The scanner works and the photocopier works. When a print job is initialized there is an error and the printer gets disabled.

View 3 Replies View Related

Fedora Networking :: Samba Broken / Error 6291, The "force User" Option Is No Longer Working?

Jun 15, 2009

I ran "yum update" on 03-06-2009 and it updated my samba version from


My network shares then became read only!After some digging it turns out my system is not working because of Samba bug 6291, the "force user" option is no longer working.

Ideally I would run another "yum update" and that would fix the problem. Apparently the bug has been fixed in Samba 3.4.0pre2 - when can when we expect that to be released and included when I do a "yum update"?

Alternatively how do I get back to version 3.2.8-0.26.fc10.x86_64 ?

View 2 Replies View Related

OpenSUSE :: 3D Effects No Longer Working

Sep 15, 2010

I did an update to KDE 4.5 recently, and afterwards noticed that 3D effects were no longer enabled. When I try to enable them from desktop settings, I get a pop up in the panel that says another application is preventing compositing (or something like that).

I have the nvidia 256.53 drivers installed and 'glxinfo' says direct rendering is on. I'm also using X server 1.9, but compositing was working with the new X server before I did the update to 4.5.

View 9 Replies View Related

Ubuntu :: TV Grab Not Working Any Longer?

Jan 18, 2010

I noticed that tv_grab is not working any longer. It seems that they do not updated the pages. It is since long time the problem.

View 7 Replies View Related

Ubuntu :: Compiz No Longer Working?

Mar 18, 2010

I have been using some of the compiz effects now for just over a week with no problems. but yesterday they stopped working for what seems to be no reason. I have the recommended nVidia driver installed, here is my graphics card from lspci:

01:00.0 VGA compatible controller: nVidia Corporation G72 [GeForce 7300 LE] (rev a1)

I right clicked on my desktop, and went to 'Change Destop background', then visual effects. This has been set to None. I cannot change this to Normal or extra, as I get an error saying

Desktop effects could not be enabled

I have followed another thread which explained how to unistall and reinstall compiz, but it did nothing.

View 5 Replies View Related

Debian Hardware :: CD Drive No Longer Working

Oct 21, 2010

I'm having an issue with my cd drive. It was working perfectly fine the last time I used it, a few weeks ago. It no longer spins up when I insert a cd it sounds like the laser keeps readjusting itself or something. The BIOS picks up the drive just fine, in the right place with the name.Nothing seems to have changed there. I think its a software issue and not a hardware one because I haven't touched the case or anything inside since I cleaned a month ago. I tried installing kvm and qemu a few weeks ago. However my hardware doesn't support it so I removed it. Could one of these programs have broken something? Is there a system log file this type of thing.

View 1 Replies View Related

OpenSUSE Network :: Wlan0 No Longer Working?

May 6, 2011

So I have been having this problem with my WiFi which isn't working. I am currently running on the following:

uname -a

Linux mmartin6510 #1 SMP PREEMPT 2011-04-06 18:09:24 +0200 i686 i686 i386 GNU/Linux

I am also using gnome-NetworkManager. If I left-click on the NetworkManager icon down on the taskbar near the clock it shows "Wired Networks" with eth0 connected, and "Wireless Networks" is blank under the heading, last week I believe it said something like "device unavailable" or something like that.

Network Details:
lo no wireless extensions.
eth0 no wireless extensions.

I was curious about when the last time I was able to successfully use my wifi so I checked to see in NetworkManger and it just so happend to be that I was on a business trip in Atlanta on a different network then am usually connected to. Don't know if that has to do with anything but I thought it was worth mentioning.

Also, I thought it may have something to do with assigning an IP address static-or-auto but I am not too familiar with NetworkManager to check that.

View 9 Replies View Related

Ubuntu :: 9.10 64bit - Belkin - No Longer Working

Mar 26, 2010

I have a belkin n wireless net card its model # f5d8053 v3 tring to get this card to work. have done some looking around and some of the places where i have looked they said DID work but are no longer working...the os on the computer i am trying to install this on is a 64 bit ubuntu

View 2 Replies View Related

Ubuntu Multimedia :: 10.04 LTS - Flash No Longer Working

May 8, 2010

I upgraded to Ubuntu 10.04 LTS last Sunday, but now my Flash is no longer working and when I try to download from Adobe's site, it only gives me the 32 bit version which doesn't work on Ubuntu 64-bit. How to get Flash (64 or 32-bit) working on my 64-bit system?

View 6 Replies View Related

Ubuntu :: Mouse Button No Longer Working

May 19, 2010

I have a 'Microsoft Comfort Optical Mouse 3000'. In addition to the regular left/right click and scroll wheel it has an extra button on the side. In previous versions of Ubuntu I was able to remap this button to act as double-click using 'xbindkeys'. However, in Lucid this no longer seems to work. X seems to know about all of the buttons on the mouse since 'xinput' lists the device as having 13 buttons and labels button 8 as 'Button Side'. However, 'xev' does not show a button event when I press the button. Instead it shows:


View 1 Replies View Related

Ubuntu :: Extra Screensavers No Longer Working?

May 26, 2010

I've recently installed the package xscreensaver-gl-extra, and noticed not one of the screensavers on that package works - all I get is a blank screen on all of them. However, I remember those screensavers working under Jaunty on exactly the same hardware (didn't test them on Karmic).How can I make them work again?

View 7 Replies View Related

Ubuntu :: Internet No Longer Working With New Kernel 2.6.32-23 / Get That?

Jul 1, 2010

Upgraded from 2.6.32-22 to 2.6.32-23 through update manager this morning.

However, with the new kernel, it appears my wired network adapter is no more working! Lucky you still can boot up in 2.6.32-22 then

Computer: Dell Inspiron 6400 anno 2007. (laptop)

Anyone else had this trouble?

View 9 Replies View Related

Networking :: Certain Websites No Longer Working Correctly?

Feb 24, 2011

Starting today I cannot log into [URL] on Linux. Whenever I try to login, it just takes forever and then either Chrome or Firefox tell me that perhaps the site no longer exists. It works perfectly fine on Windows. Strangely it also does not work on my Roku box and is working sporadically on my PS3. I would think it was my ISP or my router if it wasn't working perfectly fine on Windows.

I AM NOT TRYING TO WATCH NETFLIX ON LINUX. I know that doesn't work. I'm just trying to update my queue. I'm having this problem both on Fedora and Ubuntu (latest stable releases on both). I know it's not just loading from cache on my Windows machine because I'm going to pages that I have never been to and it's working just fine. Now, I have not tried signing out and in because then I'll be up a creak. OK, I installed another browser on my Windows computer and I'm able to sign into Netflix just fine. So it's not a sign-in issue.

WHY DOES THIS WORK ON WINDOWS? It's the same browsers - Chrome and Firefox on Linux and Windows and the same network.

ALSO, flickr is not working correctly - I cannot make any comments in the discussions (but can on photos which is ajax-y).

update: also checked a Linux computer using Linux Mint that hasn't been turned on in 2 months. I know it was able to access Netflix back then. Nothing has been changed - not even updates. It also cannot access Netflix. Either taking forever to load [URL] or when trying to login.

via looking in Konqueror, I saw it's trying to go [URL] and that's what makes it so that I cannot connect to [URL] if it considers me to be signed in. And here's what Konqueror said:

The requested operation could not be completed
Connection to Server Closed Unexpectedly
Details of the Request:
URL: http://movies.netflix.com
Protocol: http
Date and Time: Thursday, February 24, 2011 22:56


View 14 Replies View Related

Slackware :: Thunderbird Links No Longer Working

Dec 24, 2010

So, approx 2 weeks ago, clicking on links in Thunderbird stopped working. There is no response in the browser whether it is open or not. I am able to paste the links to the browser just fine. Being congenitally lazy, I would rather just click them. I have upgraded to the latest version of Thunderbird and have the same issue. I have tried using Swiftfox, Firefox and Opera - all give the same non-response.

Am not getting any error messages, the links just do not open. Can't find any settings relevant to this issue.Any bright ideas out there?

View 8 Replies View Related

CentOS 5 :: KMail And PGP No Longer Working After 5.3 Update?

May 3, 2009

Have a problem to decrypt emails after I updated to 5.3. Didn't change anything to the pgp or Kpgp settings and Kmail says that it failed decryption with openpgp. As I don't know what to look for or what to check I am lost.. it encrypts outgoing messages just fine.

View 1 Replies View Related

Copyrights 2005-15 www.BigResource.com, All rights reserved