Fedora Hardware :: Broadcom Corporation BCM4318 / No 'b43' Network Card Was Recognized?

Nov 25, 2009

I have had a Broadcom Corporation BCM4318 since Fedora 10. In addition, both Fedora 10 and 11 wouldn't recognize the card with out third-party drivers. I was pretty excited when I booted the 12 Live CD and it recognized it at boot.

Since this is my lab box I thought its time to give Fedora 12 a try.

I did an DVD upgrade from 11 to 12 and rebooted. The Broadcom came up fine this time. I did a yum upgrade to finish from whatever was not on the DVD and rebooted. This time no 'b43' network card was recognized. I still had my third part driver files so I:

b43-fwcutter -w /lib/firmware/ ./broadcom-wl-4.150.10.5/driver/wl_apsta_mimo.o

and a 'modprobe b43' and I had my card back.

I am sorry for dragging this out this far, but now every time the Fedora 12 box reboots I have to type in modprobe b43 to get my card to work. I did not have to do this for neither Fedora 10 nor 11.

I put a line in /etc/modprobe.conf - 'alias wlan0 b43' but I still don't get my wireless card until I type modprobe b43.

url

View 8 Replies


ADVERTISEMENT

Fedora Networking :: Broadcom Corporation BCM4318 (AirForce One 54g) 802.11g Wireless LAN

Sep 19, 2009

This is my first post! I am a brand new Linux fan and am determined to understand how this system works! I am running Fedora 11. My wired NIC works just fine. I am having problems with wireless. I ran lspci -v to find my driver details, found it online and got it working so it would show up in the network configuration. I am having problems getting it to work from there. I am used to getting windows to install the driver and then being able to search for wireless networks. When I try to activate it i get:

02:00.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
Subsystem: ASUSTeK Computer Inc. WL-138G V2 802.11g WLAN PCI Card
Flags: bus master, fast devsel, latency 64, IRQ 21

[code]....

View 2 Replies View Related

Ubuntu Networking :: Broadcom Corporation NetXtreme BCM5721 Network Card Randomly The Network Connection On The Server Will Stop Working?

Jan 29, 2011

I have a Broadcom Corporation NetXtreme BCM5721 network card on my server at work.Everything works fine for a few weeks, then randomly the network connection on the server will stop working. After it stops working, I will try to reconnect with the network manager, it shows a wired connection available, it shows the "connection in progress"animation, then the "connection disabled" icon.

I uninstalled the network manager and used manual configuration, but do you think the network manager was the issue? I can't have the server disconnecting randomly every few weeks with no way to know what the real problem is. Was there an issue with the network manager with 10.04?

View 4 Replies View Related

Fedora Hardware :: Broadcom 57780 Gigabit Network Card

Mar 16, 2011

I have been trawling the web looking to see how to get my broadcom nic working on my Dell optiplex 380 with fedora 12. Basically it shows up when I run lspci but no where else, unfortunately I have no linux experience. Other things that I have tried were to check the blacklist driver file, which had no reference to the nic.

View 3 Replies View Related

Debian :: Broadcom 4306 Network Controller Not Recognized / Fix It?

Jan 16, 2010

I've been trying for probably 10 hours now to get the bcm4306 driver working on Debian. I finally got it installed using ndiswrapper... However, now ndiswrapper says that the hardware is not present! When I run lspci, though, it lists BCM4306 as the network controller. What is going on, and how do I fix it? It's on a Dell latitude D600.

View 3 Replies View Related

OpenSUSE Wireless :: Broadcom BCM4318 / Can't Access Wifi

Oct 1, 2010

I've installed new drivers and when I go to connect the MAC address shows up on the router but only for a few seconds and then disappears and I can't access wifi. I've even attempted opening up the router and still can't connect.

View 2 Replies View Related

Ubuntu Networking :: Get A New Convert: Broadcom BCM4318 Not Working

Apr 20, 2010

I'm trying to help a friend with his Acer Aspire 5003 WLMi computer, and if you guys can't help me get this to work, I have to resort to reinstalling Windows XP on his computer.

I've tried with f34cutter and the Windows driver with ndiswrapper, and both ways should work (many others seems to have got it working), but I haven't.

I can't keep up with this much longer (he wants to have his laptop back someday), and I will post the relevant info as soon as you need it.

View 9 Replies View Related

Ubuntu Networking :: Broadcom Bcm4318 On Hp Nx6125 Not Working

Jul 26, 2010

I have installed Ubuntu 10.4 (with all recent updates) on my hp nx6125 with broadcom bcm 4318. I have tried installing fw-cutter from synaptic package manager but it didnt show up on hardware drivers. Do I have to do something else as well with it?

View 1 Replies View Related

Ubuntu Networking :: Broadcom BCM4318 - 9.10 - Wubi - Gateway MX6445 ?

Feb 25, 2010

I want to preface by saying that I decided to try linux the first time earlier today, so I may not understand complicated replies.

I have a gateway MX6445 laptop, you can find all info about it here : [url]

I installed Ubuntu through Wubi from [url]

So far, I haven't tried to do anything but get wireless working, and failed at that. The wireless is much less intuitive than I would have guessed.

From looking at HOWTO post a wireless issue here is some information to read:

So, where should I start? Is it a problem with drivers or do I just not understand how to connect?

View 7 Replies View Related

Ubuntu Networking :: Broadcom BCM4318 AirForceOne - 9.10 On Acer Aspire 5024wlmi?

Jan 16, 2010

I installed Ubuntu 9.10 on my Acer 5024wlmi and followed this guide from Ubuntu community to enable my Broadcom AirForceOne BCM4318 wifi card.Now the wireless adapter is on (laptop front led also is on), I can see active wifi networks but connection fails (even with a simple ad-hoc open wifi network!). I tried with Network Manager/WICD/Wifi Radar and also using terminal lfconfig/lwconfig commands without success. It seems that my wifi card cannot ping access points: for example see this log from WICD connection session:

Code:
2010/01/16 22:51:15 :: Connecting to wireless network Winx
2010/01/16 22:51:15 :: /sbin/dhclient -r eth0
2010/01/16 22:51:15 :: ifconfig eth0 0.0.0.0
2010/01/16 22:51:15 :: /sbin/ip route flush dev eth0
code....

View 3 Replies View Related

Ubuntu Networking :: Cannot Get Broadcom BCM4318 Working On Compaq Presario V5000?

Dec 18, 2010

I have this laptop, and I managed to find only the .sys and the .inf file for ndiswrapper.It worked, but it said that the firmware is missing. Was this supposed to be a .bin file?

I want to use Ubuntu on my laptop, but I'm really struggling.

View 1 Replies View Related

OpenSUSE Wireless :: Broadcom Corporation BCM43225 802.11b/g/n (Install 11.4)?

Jun 21, 2011

Wireless Card

07:00.0 Network controller: Broadcom Corporation BCM43225 802.11b/g/n (rev 01)

If you haven't added any repositories to your system you will need to do so before using zypper to install the required packages below. (instruction on how to do this under heading add repositories below)

Short Fix (This fix works if you haven't already installed b43-fwcutter firmware, and the b43, ssb kernel drivers are not load.)

zypper remove b43-fwcutter
zypper in broadcom-wl broadcom-wl-kmp-desktop
modprobe wl
reboot (and wifi worked after I activated it using FN F3 to turn it on)
Long fix if required
code....

List of Repo's I have added
1. main (contrib)
2. Mozilla
3. Packman
4. Wine
5. Kde Extra's

Packman and Main (contrib) are the most likely sources of the required files.

Once you have added these you should be good to install the required files.

One final note, I had to use an external usb wifi card to connect to the internet to add the repo's and download the required software. Lan card support coming in 2.6.38 kernel (it is suppose to add a driver for our lan card).

View 3 Replies View Related

OpenSUSE Wireless :: 'Broadcom Corporation BCM4312 802.11' Can't Connect To The Internet?

Jan 16, 2011

I posted earlier and got no response, so here i go again. I installed openSUSE 11.3 KDE, it all works fine but the wireless doesnt work and i cant connect to the internet at all, i don't know how to, and i don't even know if the proper drivers are installed. I posted this in the last thread:

"i ran this this command in ubuntu:

Code:
lspci | grep -i network
came up with this result:

Code:
02:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)

I'm not sure if its going to help any but at least you have the name of the wireless card. Please help, Without internet.

View 4 Replies View Related

Ubuntu Networking :: Wireless Home Network Is Not Recognized By Network Card (RealTek RTL8190 Mini PCI)

Jul 12, 2010

my wireless home network is not recognized by my network card (RealTek RTL8190 mini PCI). The post was as follows: "I am using a new computer with Windows 7 , Athlon quad core 2.60 64 bit, 8GB RAM. Internet conection works fine with ethernet but ubuntu does not see my wireless network. card (RealTek RTL 8190 ID: 10ec:8190). Have searched this forum but unable to come up with a fix. I was looking for windows XP drivers to use Ndiswrapper but could not find a list of .inf files. My network is OK and works perfectly in windows and with my 2 laptops. Can anyone point me in the right direction? Additional info: install was done within Windows using WUBI to a separate partition on my HDD. I am new to this and thouroughly confused as to the procedure for installing the drivers if they are in fact available."

I am very frustrated in that I would like to use Ubuntu 10.04 but it is useless without internet connectability. I am new to linux and do not understand where to get the appropriate drivers or how to install them. I wish someone would answer this post and either give me a clue what to do or just say "give up" and uninstall ubunutu.

View 2 Replies View Related

Ubuntu Networking :: Error Ethernet Controller Is BROADCOM Corporation Device 1692 ( Rev 01)

Dec 1, 2010

I am not able to configure ubuntu 9.04 on network ,

i get error Network UNCLAIMED. error ethernet controller is BROADCOM Corporation Device 1692 ( rev 01)

View 3 Replies View Related

CentOS 5 Networking :: Can't Get Broadcom Corporation NetXtreme BCM5761e Gigabit Ethernet PCIe Working

Sep 20, 2010

from [URL]

i did the following

[root@localhost ~]# lspci | grep Wireless
0c:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100

View 5 Replies View Related

Fedora Networking :: 14 Can't Connect To SpeedTouch 585 - Either Wireless Broadcom Card Or The Wired Ethernet Card

Dec 4, 2010

Just installed Fedora 14 from the Live CD i686 on my Dell Inspiron 1521. I can't connect to the SpeedTouch 585 on either wireless broadcom card or the wired Ethernet card.

I can connect to it from the same Laptop on the Vista which is on dual boot on the same laptop.

Further confusing is that I ran Fedora 14 and connected to another SpeedTouch today.

Already checked the Channel on the wireless nic and it's on the same one as the SpeedTouch.

View 6 Replies View Related

Fedora Installation :: Intel Corporation 82579V Gigabit Network Connection?

Aug 29, 2011

I installed Fedora 14 on my new PC but I don't have network connection. In fact, I hit the command "lspci" and the prompt return :

Code:
Ethernet Controller : Intel Corporation 82579V Gigabit Network Connection
So, I created a ifcfg-eth0 file on /etc/sysconfig/network-script because it doesn't exist :

Code:
DEVICE=eth0
TYPE=Ethernet
BOOTPROTO=dhcp
ONBOOT=yes

Then, I restart network service, but eth0 is down, no device found for the connection eth0.

View 10 Replies View Related

Ubuntu / Apple :: Broadcom Wireless Card - Connecting To WPA Network

Apr 15, 2010

I seem to be have issues periodically connecting to wireless networks with WPA. It'll work one minute, and then I switch my macbook back on after a period and it refuses to connect again. It's happened on and off on three different networks now.

An example of /var/log/syslog:
Code:
Apr 15 17:57:27 macbookpro NetworkManager: <info> Activation (eth1/wireless): association took too long.
Apr 15 17:57:27 macbookpro NetworkManager: <info> (eth1): device state change: 5 -> 6 (reason 0)
Apr 15 17:57:27 macbookpro NetworkManager: <info> Activation (eth1/wireless): asking for new secrets .....
Apr 15 17:58:27 macbookpro NetworkManager: <info> (eth1): deactivating device (reason: 0).
Apr 15 17:58:27 macbookpro NetworkManager: <info> Policy set 'Auto eth0' (eth0) as default for routing and DNS.
Apr 15 17:58:29 macbookpro wpa_supplicant[949]: WPA: No SSID info found (msg 1 of 4).
Apr 15 17:58:29 macbookpro wpa_supplicant[949]: No network configuration found for the current AP
Apr 15 17:58:29 macbookpro wpa_supplicant[949]: CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys

View 3 Replies View Related

Slackware :: USB Wireless Card Recognized But Cannot Connect To Network?

Dec 17, 2010

Hi I have istalled a D-Link wireless adaptor - with the help of this forum.

It is up and running - the light flashes and lsusb identifies it correctly, so does iwconfig.

I can, however, not connect to the network, and I noticed the following errors on boot up.

Trigering udev events: /sbin/udevadm trigger -- type: failed /etc/rc.d/rc.M: wlan0 Error for wireless request; "Set Nickname" (8BIC) information; "Any ESSID" Set failed on device wlan0; operation not supported.

Lower down I get

Starting rt2870 drivers . . . /etc/rc.d/rc.inet1: wlan0 information "Any ESSID"
Error for wireless request "Set Nickname" (8BIC) set failed on device wlan0 : Operation not supported

I have on two occassions seen sugstions to use wicd, but how do I use that?

View 14 Replies View Related

Ubuntu Networking :: Broadcom Network Card - WiFi Light Stays On All The Time ?

Dec 13, 2010

I installed Ubuntu 10.10 amd64 online today. I was using 10.04 32-bit before, and the network drivers were easy to find and install. Ubuntu did the job for me and they worked flawlessly. It was a relief I didn't need to search around.

Even though 10.10 (64bit) found the drivers for me, both ethernet and wireless, they do not seem to be working alright. I installed both, made a restart. I found that the WiFi light on my laptop stays on, even if the wireless network is turned off using either the key combination (Fn+F2), or manually turning it off.

Issues with the ethernet? I am right now using ethernet but it does not care to detect the connection. Empathy won't connect automatically as a result- says no network connection. But here I am, posting this. Evidently, there is a connection, right?

Issues with the wireless? The WiFi light stays on all the time, and it isn't able to get hang of the connection I have at home. It just won't show any wireless connections available. When I tried to connect by giving it the SSID and the encryption type and password, it didn't work. Just kept asking for the password again and again (I have checked with the router- the password is correct).

View 2 Replies View Related

CentOS 5 Networking :: Configuring NDISwrapper For BCM4318 Wireless Card

Feb 16, 2010

I've search for info on configuring ndiswrapper for the BCM4318 Wireless card. All I've been able to find is information on Ubuntu and Debian, which don't seem to use the same methods for configuration. Has anyone configured ndiswrapper for this or any wireless card on CentOS 5? I've installed 5.4.

View 7 Replies View Related

Ubuntu Networking :: Broadcom Wireless - Wired Network Card Has Died On Me Prior To Installation

Sep 12, 2010

I just installed Lucid Lynx on my Dell Vostro 1000 laptop. The problem I'm having is that my wired network card has died on me prior to installation. I'm having the hardest time finding the required files to make my Broadcom BCM4311 wireless card work without being able to download any packages from the web. If anyone knows which files I need and which order I should use to install them that would be great.

View 5 Replies View Related

Debian Hardware :: Network Card Not Recognized : On Intel DH57JG Motherboard?

Jul 20, 2010

I bought a Mini ITX motherboard Intel DH57JG bu the installation DEBIAN does not recognize the ethernet card.

View 9 Replies View Related

Ubuntu Installation :: After Installing - 10.4 - Driver For My Wireless Network Card Isn't Recognized

Sep 29, 2010

I have recently installed Ubuntu 10.04 beside my Windows XP on my laptop:
Dell XPS 1330

I`m now facing some problems with my new OS :

1. The driver for my wireless network card isn't recognized although I have installed the recommended driver which was in Ubuntu Hardware Driver section.

2. When I connect my laptop to my TV using HDMI port, the screen is OK but there is no sound!

3. When by any reason my network cable is unplugged, the whole network service goes down and I have to restart the system.

lspci results:

View 1 Replies View Related

Ubuntu Networking :: Broadcom Corporation BCM4312 / Latest Ubuntu Version / HP 67352 Notebook?

Jul 30, 2010

My wireless isnt working on my HP 6735s Notebook.Theres no drivers in the driver manager nor does it find my network.The wireless indicator on my laptop also shows my wireless is turned off even when i press the button to turn it on.

lspci:

michael@ubuntu:~$ lspci
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge
00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (int gfx)
00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0)
00:07.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 3)
00:09.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 4)
code....

View 3 Replies View Related

Fedora Networking :: BCM4322 Broadcom Card Can't Use WEP

Jul 11, 2009

I have a Dell-made, Broadcom-based wireless card, BCM4322. I'm using Broadcom's proprietary drivers from RPM Fusion.

Code:
lspci | grep -i broadcom
09:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5784M Gigabit Ethernet PCIe (rev 10)
0c:00.0 Network controller: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller (rev 01)

Since installing F11, I can no longer connect to WEP-secured wireless. When I use automatic IP settings, the connection simply times out. When I specify an IP, Netmask, Gateway, and DNS server, NetworkManager thinks the connection properly established, but any pings time out, even when I don't specify a hostname (just an IP address). I can connect to (and use) unencrypted wireless. I haven't tried other encryption schemes. The WEP index is 1 and it's non-authenticated (open). I've been playing with the settings for over a week now with no success.

View 6 Replies View Related

CentOS 5 Hardware :: Sound Card Not Detected (nVidia Corporation MCP61)

Jun 13, 2010

how to detected sound card or drivers.when i am trying to detect sound card by using command system-config-soundcard it gives output on gui mode (Audio Configuration) but there is nothing show on PCM device. System Configuration which i am using.

#uname -a
Linux *** 2.6.18-8.el5 #1 SMP Thu Mar 15 19:46:53 EDT 2007 x86_64 x86_64 x86_64 GNU/Linux
#lspci
00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a1)

[code]....

View 3 Replies View Related

Fedora Networking :: Install Broadcom Wireless Card On 11?

Sep 1, 2009

I chose to change my operating system from Microsoft Xp to Linux and finally chose Fedora to be my new OS.

After Fedora installation I got a problem that I cannot connect to my wireless network I used to using Xp, I think that my wireless card is not installed on Fedora because when I checked in the network configuration I found that the only installed adapter is the Ethernet Realtek for the wired connection.

My OS is Fedora 11.

The CPU Model name is : Intel (R) Core (TM) 2 Duo CPU T8300 @2.40 GHz, so I think that my architecture is x86_64.

My Network controller is : Broadcom Corporation BCM4312 802.11b/g

View 14 Replies View Related

Red Hat / Fedora :: Broadcom 4322AG Wireless Card Support?

Dec 25, 2010

I'm thinking of installing Fedora 14 on my hp laptop, and need to know if this will support the Broadcom 4322AG wireless card it came with, will only probably use Fedora if the card is already recognized, or an easy gui install. This is the game changer between using fedora or linux mint for me

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved