I just installed Fedora 11 (I installed over the Fedora 10 installation I had already installed)..
-Before I would have Grub give the choice of Fedora 10 or Windows (Where Windows would load the Win Boot loader for my options of Windows 7 and Windows Vista)
-NOW: I have the same options.. But when i select Windows (It loads the Recovery partition) instead of the Windows Boot Loader...
Here is my fdisk -l
Device Boot Start End Blocks Id System
/dev/sda1 1 192 1536000 27 Unknown
Partition 1 does not end on cylinder boundary.
/dev/sda2 192 5414 41943040 7 HPFS/NTFS
Partition 2 does not end on cylinder boundary.
I recently replaced a failed graphics card w/ a GT 240. Next thing I know, Fedora 11 won't boot up properly. I guess it was a driver issue. I can tell you I went about fixing it all wrong because I wiped the FC11 partition (intending to install FC13) and now I can't boot anything up. My system consists of: sda1 vista, sdb1 XP, sdb5 extended, sdb6 Fedora. I thought grub was on the fedora partition, but reinstalling fedora with grub on that partition didn't fix the boot up problem. Do I need to replace the windows boot loader on sda1 with grub when installing fedora?
Not a major issue but my Ubuntu boot screen change to the old classic Orange theme after i installed Kubuntu on a different drive and ofcourse a new Grub loader as the Kubuntu installation prompted. It can't be because of the Kubuntu installation but i can't find any other reason for that to happen.
i've a little problem with the grub loader. I've two OS in my laptot: Ubuntu 9.10 Karmic Koala 64bit and Windows 7 64bit. But i can't boot Windows 7 from the grub loader. The grub still load the /dev/sda1 partition that is the recovery partition of the laptot, while windows 7 is in the partition /dev/sda6. I tried to modify the path in the grub.cfg, but still load the wrong partition, how i can do?
I installed Ubuntu 11.04 64-Bit via Wubi but it seems that when I turn on my machine I first get the Windows Boot Loader, when I select Ubuntu from the list it then goes into GRUB with the option to select Ubuntu or Windows. Is there any way to change this so only GRUB is used?
I have triple booted Windows XP (195 GB)partition 0? the second partition is Windows 7 (195 GB)And the rest of a 1TB hard drive went to Open Suse 11.3. if it makes any difference I used g parted to create the three partitions and made them all primary. My problem is I want to change the way they all get along. When I boot up, I get the options;
Desktop -- openSUSE 11.3-2.6.34-12 Failsafe -- openSUSE 11.3-2.6.34-12 windows 1 windows 2
which is fine, but clicking on windows 1 takes me to the windows boot loader with the options of windows 7, or previous version of windows. clicking on windows 2 brings up a screen telling me " rootnoverify (hd0,1) chainloader +1 BOOTMGR is missing press ctrl+alt+del to restart" I would like the end result to be windows 1=XP,windows 2=7, then I can rename them accordingly. one more thing, when I installed openSUSE, I let it automatically configure the hard drive and create the necessary partitions(it deleted partition 3 first). i remember it saying somewhere that the boot manager was past the 125 GB limit, and might not boot.
This is a problem when Windows is running some malware that cannot be removed, which happens all the time. The problem is all the new hardware or specialized hardware will not work on Linux so Windows is the only choice. I would think the latest versions of Linux would have this problem worked out by now. I installed 11.3 one week ago, only to find that the repair option in the install menu no longer exists so don't bother uses this link to reload the GRUB HowTo Boot into openSUSE when it won't Boot from the Grub Code on the Hard Drive. I also tried this link Re-Install Grub Quickly with Parted Magic which does not work either. On step 2 typing grub returns the error message "grub command not found". You can use GRUB if you boot the install DVD and select Rescue Boot. However when you type find /boot/grub/menu.lst the error message "file not found" is returned.
I did the following to restore my GRUB boot record. Boot the install DVD and select the update option during installation. Change all the repositories to enable except the NVIDIA repository, it is not responding at this time. When the system comes up go into Yast and open the boot loader. It should have your original boot menu in memory. Change the default to another option and re-write the MBR. This will write a new MBR using the original data updated with your new default. Re-boot and then change your default back. I am just a NewBe so this may not be exactly correct but I hope it saves someone like me some time fixing a MBR re-writing by the Windows installer.
I recently installed ubuntu 9.10 32 bit using live cd onto a recently new Dell machine with windows7.
Everything was fine for a couple of weeks, but last night I got the error code...
Looking into the forums, I see that maybe I need to re-install grub 2. When I started probing using fdisk, I saw that the boot partition was my windows partition. So, I thought I would ask to find out if this looks right before I start making things worse code...
I tried to install linux on hard disk and it installed without any problem. However, when i boot i directly get the windows boot loader screen and no grub screen. I reinstalled linux. I tried to fix grub, but still no grub screen.
I installed Ubuntu 11.04 on a separate partition, with Grub being in it own partition. When I start the PC only windows Xp is available. So how do I get grub or Ubuntu load with windows xp boot loader? I tried with Live cd, the sudo grub but then it says command not found. I think its because Ubuntu 11.04 uses grub 2.
I just made my system unbootable... Here is what i did.. I have two sata HDDs
160 GB (Contained Windows 7) 500 GB
I copied entire 160 gb as an mirrored image to 500GB HDD using Acronis Disk Director. I deleted entire 160 GB HDD.. Removed the 500 GB HDD and kept it seperate.. Installed ClearOS Enterprise 5.2 Worked a little bit... The i wanted to delete ClearOS.. So i connected 500GB HDD and booted again in Acronis Disk director Formated the entire 160GB HDD.. Copied back the entire 160 from 500GB HDD.. Now my sytem refuses to boot... Just 4 letters "GRUB" appears on the screen... I tried booting using XP CD.. It gives a blue screen.. I tried Windows 7 CD.. It says unable to fix due to MBR problem..
i want to boot windows from grub loader and delete linux .Is this possible?or can i keep only /boot partition so that windows boot from grub prompt i want to boot windows from grub loader and dont want any linux partitions on my machine.Is this possible?or can i keep only /boot partition so that windows boot from grub prompt and delete rest of the linux so that i can get all free space.it is not possible for my system to get windows boot loader hence i want only grub boot loader to load only windows.
I got ubuntu 10.04 lucid lynx along with windows (dual boot) and using Grub. On my computer, I have my C:/ (programs) and D:/ (data). I've never used my D:/ before that day that I've lost my windows partition on my grub menu. I usually use my D:/ with windows. The first time I used my D:/ to store data with linux, I lost my windows option in my grub menu. I'm not sure what I did wrong but I do want to restore my windows option in my grub menu.
After "fdisk -l",
I checked in /boot/grub and there is no menu.lst to modify. how I can get back my windows option in my grub menu ?
I have Windows 7 and Ubuntu 10.04 dual-booted on my machine. grub was aautomaticlu installed as the primary loader. Soon i want to nuke my ubuntu partition but i know that will delete grub. Can i remove grub or at least make Windows boot loader default.
I am a new Ubuntu user, and I am attempting to set Windows 7 64 bit as my default OS in the boot loader instead of Ubuntu 10.10. I have entered the command gksudo gedit /boot/grub/menu.lst into terminal, and the menu.lst file does open. However, this file appears to be completely blank, which does not seem to make sense and is preventing me from changing the boot order.
I am currently running a dual boot machine with Ubuntu 11.04 and Windows Vista.Is there any way I can delete the Linux partition and Grub boot loader without affecting the Windows partition at all?I would also like to be able to repartition all of the space that was previously occupied by Linux.
I installed Fedora 14 alongside windows, overwriting my old Ubuntu 10 partition. Unfortunately, now the GRUB loader only recognizes my Fedora partition and the built-in windows recovery utility partition. I checked the disc utility and my windows partition still definitely exists, I just can't seem to boot into it.
I had a dual boot machine with fedora 12 and windows vista and I could use grub boot-loader to switch between two. Few days ago windows got corrupt and I have to reinstall it. I put windows 7 now and as usual it erased grub. So to reinstall I put the fedora 12 installation CD on and followed some usual setup steps. When I got the command line I issued the command "grub-install /dev/sda" (sda not hda because It showed bunch of sda, sda1..) but surprisingly it said grub command not found. I remember doing it before while it worked fine.
I have XP, Win7 Pro and F 11 installed. Before I installed F 11, Win 7 boot mgr was working fine. I then installed F 11 and I went to System/Admin/bootloader to edit it and it wouldn't bring up the boot loader. In the attachment was the error msg. Now my only option when I boot up is F 11.
I do not have access to the Win 7 DVD only the F 11 install disk since I am on a fishing trip and need to use Win 7. How can I repair to the grub boot loader to boot into Win 7?
I got the grub loader to work finally. The problem is it does not always display at initial boot or a restart. I have seen the selection menu but it doesn't always appear. I have it set to point to windows so that my wife can hit enter when she gets a blank screen.
What I like is to install Fedora13,Win7,WinXp, and Musix. One HD 1.5TB Ilike on that is win7 and Fedora13,the other one with 400GB WinXP and Musix. What should I do so I can setup on GRUB. How can I set up like that.
As I attempted to uninstall an MP3 decoder through the command line, I may have also uninstalled the boot loader to Fedora 13. I entered the command to uninstall the program as su - , left for a second, and upon my return I noticed a lot of things were being uninstalled. After canceling the process I turned of my computer and now when I try to start it, my computer freezes after the Fedora icon appears on the blue screen. After looking through the online manuals, I think I uninstalled the GRUB boot loader. I've been trying to reinstall it through the image on the DVD, but it keeps getting stuck on the blue screen. I use a Toshiba satellite with no partitions.
I successfully installed Fedora 11 from the DVD iso. At the end, the installation program prompts me to reboot the system. But when the boot loader appears after rebooting, there are only the old entries.
I have 2 IDE disks and one sata disk. The first IDE disk is hd0, the second IDE is hd1. The SATA disk is hd2. In the setup, I selected hd0 to install grub. Fedora 11 was installed on the SATA disk (hd2). I forgot to say, that Fedora 10 is on /dev/sda and Fedora 9 on /dev/sdb
I have two hard drives, one (hard drive C) is 250GB and is the first hard disk. The second (hard drive Z) is 1000 GB and is the second hard disk in order. There used to be windows XP on C and Windows 7 on Z.
Because I installed 7 to Z from XP which is on C, it put the Windows Boot Loader on hard disk C. I didn't know this until now.
When I installed Fedora, I gave it all of C to install on. That messed up something because the Windows Boot Loader was on that drive, so grub didn't list it in the OS's to load. I had to add it manually, and got it working correctly so it had an entry for the partition that Windows 7 was on. This didn't work however, because Windows 7 on drive Z didn't have it's NTLDR on that drive, so now I have a 7 installation without an NTLDR on Z and a Fedora install on C. I am sure grub is working properly because when I change the load order of the hard drives to load Z first, it gives the same error:
NTLDR is missing Press Ctrl + Alt + Delete to restart
or something along those lines.
Is there a way to get Z to have an NTLDR again and be able too boot Windows 7? I really hope I didn't mess up my entire 7 installation because of this.