Every time i tried to burn a cd or dvd at the end i get the message "Error while burning. You do not have the required permissions to use this drive"
[Code]...
I've got two external drives that are using ext4 that for whatever reason, I just can't seem to write too. I've changed the permissions on the drives using chmod so the permissions are "drwxrwxrwx". I can even right click within the drive and click "Create New Folder" but then it tells me, "Error while copying to "sdc1". The destination is read-only." I thought the destination permissions were setup so anyone can read/write to the disk? I haven't been using linux that long and have only recently started to feel comfortable to move over all of my stuff to Fedora.
View 6 Replies View Relatedi'm getting this error in K3B during burning VCD from previously created mpeg files(VCD pal),
View 2 Replies View RelatedI've downloaded the DVD version of Fedora 12 with a torrent so it shouldn't be corruped - checked the hash anyway and it wasn't - and I burnt it at a low speed and has my burning program verify that it did indeed burn what it was supposed to. I tested the disc for errors and every time it shows up that around the 70% mark that the DVD has an error.
View 3 Replies View RelatedI want to make a backup from my drive and burn it to dvdrom.
View 2 Replies View RelatedI am getting ready to go to FC14. Yesterday I downloaded both the 32 bit and 64 bit versions -dvd iso. When I tried to burn the images with K3B I got the message 'No Optical drvice found'. Shut off my PC and rebooted this morning. The first thing I did was I tried to burn the 32 bit version with K3B. It worked. Went off and installed it - no problem. I came back to burn the 64 bit version. K3B says "No optical drive found'. K3b (and/or Fedora) lost connection with my optical drives - a DVD-Writer and DVD reader. I have put cds into the drives and tried to open the cds with File Browser with no luck.
Some pertinent data:
[root@Vince vince]# cat /etc/fstab
#
# /etc/fstab
# Created by anaconda on Mon Aug 17 15:12:43 2009
#
# Accessible filesystems, by reference, are maintained under '/dev/disk'
# See man pages fstab(5), findfs(8), mount(8) and/or vol_id(8) for more info
[Code].....
I looked in messages and found no references after the successful burning of the 32 bit dvd. Nothing to indicate why Fedora lost contact with the dvd writer. What else is needed to fix this? I think that if I reboot, I will have access to both drives again. If that happens, I will burn the 64 bit iso and look into updating my system.
i have a file that i'm trying to burn and for some reason when the burn process completes i get the following error message: Error while burning.You do not have the required permissions to use this drive.i'm not sure why this is happening- is there something i have to set/enable to be able to use my DVD drive? i am using brasero to burn my dvd, and it appears that the failure occurs during the verification process.
View 3 Replies View Relatedi both have the same problem, i'm trying to burn my images at 4 or 8 speed, but ubuntu 10.04 says that the hardware does not support that kind of speed and switch up to 16 speed and more. i know it can burn at low speeds, at least in windows, it is a bit strange that fast burning is okee, and slow not, what can i do to prevent this? i don't wanna burn to much errors on my discs
View 5 Replies View Relatedi have just installed Red Hat linux 9 workstation ,i have configured the lan ip and successfully ping to other pcs on network ..but problem is internet is not working , i have already set the proxy setting, i have windows environment and running isa server 2006 proxy server ,when i trying to browse any site , isa eroor page occur "error code :407 proxy authentication required" Linus machine couldnot prompt the user credentiall.
View 2 Replies View RelatedWhen ever I try to run system-config-samba after the recent update I get the error:
connection.py:630:call_blocking:TypeError: a float is required
It seems I can't burn any kind of disc (cd/dvd, audio/video/data) usgin my internal sata burner (sr0). I treied googling around and reinstalling everything from dvd+rw-tools up but the error is still there. the burner works fine with windows on the very same pc (dual boot). I tried different media and different speeds. when using an usb burner everything's fine...
[Code]....
I looked through the guides and didn't find what I was looking for. Here is what I have so far:
[Code]...
That's the drive I am wanting to mount with full permissions for anyone. Right now the folder only has root permissions. Is there a specific group ID I assign this in fstab so it's automatically mounted with full permissions for anyone who logs in?
I am having a few security issues with fedora15. they are like i cannot modify any folder in orher partitions of my HDD unless i am a root user. i have tried the GUI approach bt it doesnt help. there are more than a few hundred folders with thousands of files in total. tell me a way so that i can change permissions for one drive at once.
View 4 Replies View RelatedFedora Core 11 and installed songbird via songbird wiki website.I want to play mp3 files with songbird (which is basically why i downloaded it cos i dont like amarok) but when i try to play a file, it gives this message:"MediaCore Error: An id3 tag demuxer plugin is required to play this stream, but not installed"i searched a lot on web but couldnt find a solution
View 14 Replies View Relatedi've just burned a livecd (fedora 11), but it doesn't work correctly.it says after i hit boot:
BUFFER I/O error on device sr0 logical block 352328
and then something else, which is similar so i didn't write it down.i read on bugzilla, that is should try to append the boot command with pci=nomsi, but it doesn't work for me
I've been installing/tweaking F12, and I've found something that I can't say I've ever seen or expected to find before: the contents of my ~/Documents folder has lost its permissions and ownership info. I restored it from a backup last night/this morning, and I've rebooted a few times since then. Other folders from the backup are OK, just Documents.I don't know what my options are. I could try to blow it away and restore it, but that doesn't answer what caused it. If there's a "relabel" or something, that might help... though I've never had to do it before. Could it be that after these two-and-some-change years, my hard drive is giving out? Good thing I have a recent backup... but it'd be a shame to lose all my work getting F12 to work again.
View 4 Replies View RelatedI have an issue that my BACKUP drive is listed twice. (internal FAT) I am running F12 32b. I have it listed in FSTAB so it will automount & set the permissions. I did this in the earlier versions I upgraded from. I would like to either get rid of the other entry or, if easier, make it auto & set permissions but I don't know where it is.
View 11 Replies View Relatedi borrowed an external hard drive from my friend to back up a load of stuff on my windows partition before reinstalling it. I am doing this through ubuntu. I am trying to zip up folders like My Documents etc and chuck them on the external hard drive but it always comes up with errors to do with read/write permissions. In the permissions tab on the folder properties of the ext hard drive it says I am owner but i have no file access (only folder access is create and delete files). When i try to give myself read/write permission it just goes straight back to nothing when i look at it again.
View 2 Replies View RelatedI seem to be having a problem with burning CDs. Whenever I launch k3b, it says 'No optical drive found.' However, When I insert a CD while in KDE, it properly mounts it. What do I do? It seems like udev/hal is working fine. Also, I can't get KDE to recognize any inserted flash drive or external usb storage device inserted on demand.
View 1 Replies View RelatedI am trying to burn data to a DVD. I checked scsi number of by DVD drive and found out it as 4,0,0.
I used the command:
I am getting error:
what does it mean? How to rectify this.
I downloaded the LiveCD of Lucid to install it on my old notebook (which currently has *shudder* Winblows XP). The downloaded ISO passed the md5 check, but I can't burn it.I am using Lucid on a netbook right now, and it has no internal CD burner. So, I'm using an external CD/DVD burner via a USB connection.Ubuntu recognizes that there is a blank disc in there, but there is no "Burn to disc..." option in the right-click menu
View 9 Replies View RelatedI Just got a Removable Hard drive! Now I need to format it because I need it to hold more then 4 GB file sizes. What format should i used. I'll only need compatibility with Other LINUX computers. So should i use NTFS, BTRFS, or EXT4? How would i take ownership of the backup drivers file system and not ROOTS permissions
View 5 Replies View RelatedI keep getting the following error when trying to burn a DVD, and unfortunately am none the wiser as to what it means:
Code:
DBus error
This is using both Brasero and K3b, the disk stops writing about halfway through on Brasero and a tenth of the way through on K3b. I'm just trying to burn a data DVD and have tried low & high speeds.
Latest version of 64bit Ubuntu
Since I started using Linux I've learned that almost anything is possible with a little tweaking, so I was just wondering that if I have a CD-RW/DVD-ROM drive on my laptop, is there any way to make it write to a DVD instead of just reading it? I know it's a long shot, but since the drive can write to a CD, I don't see a reason why it couldn't write to a DVD somehow.
View 7 Replies View Relatedhow to burn a iso to a flash drive
View 9 Replies View RelatedI see there are a lot of other threads on this subject, but I don't find any solution in the other threads. I have been trying to burn cd's directly in Ubuntu, using Brasero, which was already installed. Why does it not work? It says that an "unknown error occurred" or something like that. I don't remember the exact error message right now. I am now burning cd's in "Gnomebaker" which I found in the applications list. This works fine, but only at the speed of 4x, no faster. I hope to get the brasero application to work, as this is the easiest, fastest way, just dragging files to the cd.
View 2 Replies View RelatedI don't know what the difference is between DVD+R and DVD-R or if it matters, lol.
I was trying to burn 2.0 GB of data to a 4.7-GB DVD+R and after it finished burning, I got "There was an error writing to the disk."
When I opened the directory of the disk, it appeared that all of the files were there, but when I tried to open any of them, I got "Could not read from the resource" errors.
I tried burning it again to a fresh disk and it was the same except when I tried to open the files it said variations of "error interpreting file".
I checked the log files and mostly it was unhelpfully generic errors, except for this line:
"BraseroLibburn Asynchronous SCSI error on CLOSE TRACK SESSION: [3 73 04] Program memory area update failure"
That part was the same for both attempts. What could be causing this?
i've had alot of problems with karmic koala but i think i should blame it on my computer damn things ancient anyways i want to install puppy linux because karmic requires all of my ram to operate but the only problem is that i can't get my CD-RW drive to burn i've ran an image burn through k3b brasero and gnomebaker and everytime i try to burn the image my computer freezes up i'm ready to pull my hair out i want to get puppy linux on this thing so it'll run faster is it because i'm trying to do too much with not enough RAM if so is there a few extra programs i can suspend untill i have burned the OS or
am i missing some kind of file or program or what i mean i can't even get the disc back out even if it unfreezes i still have to restart the system just to get the disc out i know it can't be my disc drive it's not new but it's never been used till now and it didn't come with a driver disc so it can't be that either all i want to do is get puppy linux installed and move on with my life until i buy a new computer then i'll just install the lastest ubuntu version at the time
I downloaded peppermintos as a replacement for ubuntu on my laptop. Now i can't burn it to a dvd. I'm using GnomeBaker and I get " /dev/sr0: media is not recognized as recordable DVD: 0". Is there a way to fix this, or even better, a way to run the iso straight from the hard drive.
View 3 Replies View Relatedi just added a new storage disk, and i can still boot the old one with ubuntu 10.10.
I want to install ubuntu on the new disk using the existing install.
Don't want to burn a CD or go hunt for a pen drive.
