I'm unable to use 3d accelerated graphics in the desktop effects. I'm getting the infamous 'Desktop Effects require hardware 3d support' error. My GPU is an ATI Radeon HD 5670, and I've already tried the proprietary driver from ATI. It hung my system and gave me loads of issues, and to be frank, the ATI driver has NEVER worked for me. I'm using 32-bit Fedora 14, but if I remember correctly the 64 bit version of Fedora 14 did let me do this without an installer.
I attempted to install the mesa-dri-drivers-experimental package and my screen became unusable when I enabled desktop effects. I then uninstalled mesa-dri-drivers-experimental and tried to install the akmod before realizing that my card isn't supported yet. Now I can't seem to do anyting to get my screen back. I removed the blacklist on nouveau, but my screen still goes black after fedora boots. Is there any way I can just get things back to default without reinstalling the whole system?
i just installed this operating system because i've been trying all the linux distrobutions and i've used ubuntu and am used to it, so far i like this operating system i just dont know much about it yet. Here is the problem so far at first i wasnt able to get online then i some how got it to work by using yast. now i'm trying to enable the desktop effects but at first it said that my graphics didnt support it, i have a nvidia geforce 9400gt PCI-E 512MB video card, it works with ubuntu desktop effects with no problem. i noticed that it didnt ask me like in ubuntu something about the drivers not being open source and what not.
so i looked at the hardware information and it said the drivers weren't active so i went to the the nvidia site, downloaded the drivers but they wouldnt install so i found a website that said something about one click install, that wouldn't work. so i found on this forum from someone that i needed to add nvidia in the respetories, so i did, it installed the nvidia software and drivers, the video card is show and now in the hardware it shows the drivers as active. but when i activate desktop effects it asks the yes or no question then flashes after i click yes, the graphics work for one second if that, and then the bar and windows disapear and it goes white, i can still see the mouse then goes back the desktop and acts as if its enabled still but no transparent windows or wobbly windows, so i click close open it and its disabled, and its just a loop everytime i try and enable it, not sure how to post a pic but i took a screen shot of my graphics hardware.
Just put 11.4, 32 bit on a system with an Intel D865 GLC motherboard and 865G built in graphics controller. While the install went OK it turns out that X is totally hosed. After fighting with things for a while and discovering that Sax2 had disappeared I poked at Google and discovered some other poor folks that have had similar issues with Intel video cards. Based on a suggestion for a doc in OpenSuse.org I edited the file: /etc/X11/xorg.conf.d/50-device.conf
and added the line: Driver "intel" to it - after that things got better. Obviously the install process had not identified the video card correctly. I'm now left with another issue - while the system now identifies the driver and can talk to the monitor correctly, a Samsung S23A350H I can't open a window after X comes up and I login - basically the same issue as the unresolved Bug 673873: [Bug 673873] intel [865G] Windows flash rapidly or don't appear if Desktop Effects are on in KDE and GNOME
The workaround is to turn Desktop Effects off but since X doesn't work I can't figure out how to do that. I can't find the gnome-xgl-switch or a xgl-switch that used to exist to do it on the command line so that's out. Someone said you could drop the empty file "disable-compiz" in the ~/.config/compiz directory and that would do it but in 11.4 that directory doesn't exist. how to disable "Desktop Effects"/XGL/compiz or whatever it is now called on the command line in OpenSuse 11.4 without a gui if that is still possible?
fter I enable the desktop effects on KDE, everytime that I login in to a session,KDE crash.... Im just gettin a black screen.My question is. Can I turn off the desktop effects by editing a file? if so, which file do I need to edit.... and where is the extensive directory tree i can find a the file that holds information about kde crashing "error file or log file" were I can get more info in what is happening with KDE and find out why is crashing.
Desktop Effects could not be enabled. Also, I'm not having any luck installing Catalyst drivers. After installing Catalyst driver for the right kernel version, Xorg goes corrupt when starting up.Kernel: 184.108.40.206-64.fc11.i686.PAEVideo card: ATI Technologies Inc Mobility Radeon HD 3450$ glxinfo | grep renderdirect rendering: YesOpenGL renderer string: Software Rasterizer
I have installed Fedora 12 on my laptop (Lenovo X61s) and now I have some problems with my OS. Please help me to config my machine.Currently I can not enable Desktop Effects any more. I receive this message: "Accelerated 3D graphics is not available. Desktop effects require hardware 3D support."
I'm sure that I could enable the functions of compiz when I used fedora 11 and Fedora 12-beta on my laptop before.Besides, when I represent my slides, I can not see my screen on my laptop any more. It's dark. When I used Fedora 12-beta, I can see my screen and another screen for my representation.Is my Fedora lack of some necessary packages? Is it necessary to reinstall the VGA driver? How can I do?
I've just recently come back to Fedora from OpenSuSE, where all of my compositing worked beautifully before my hard disk took a big dump. Now that I have Fedora 13 installed, I've gone through the ridiculous hassle of eliminating nouveau so that my NVIDIA drivers can do all the work. Everything seems fine except that some of the animations of desktop effects are very slow and choppy. For example, the minimize window animation looks great, but upon un-minimizing, the animation gets choppy and slow. Same with the slide animation for the dialogue windows. Transitions of the desktop cube work just fine. Show windows animation works good on zoom out, but zooming back in is slow and choppy.
I'm quite puzzled here. Originally I used the NVIDIA driver from rpmfusion. I've had troubles before (with OpenSuSE) with the version in the repos, so I tried installing the latest version from the NVIDIA website. No changes though.
After I updated to KDE 4.5.3 in Fedora 13 I've had 2 things stop starting up when I boot up. They were working fine before the KDE update.
The first is desktop effects. I turn it on, but once I reboot then desktop effects are disabled again. When I turn them on I get a KWin message that it has been turned off by another application. How can I find out which application that is and why?
The second is Yakuake, which I want to start automatically when I boot up. I don't see where I can set it up to start automatically (and I don't remember how I did it before, or if it was automatic when I installed it).
UPDATE: I just found the autostart configuration and added Yakuake. It worked, now it runs whenever I start.
I have installed Fedora 14 on an old Pentium IV with 1 GB of RAM to experiment with. I enabled desktop effects and now I cannot log on to KDE. The computer freezes while loading the KDE Desktop environment.Any ideas on how I can fix this via the command line?
how I can make desktop effects work on F11. it used to work on F10. Now I get the garbled screen every time I enable it on gnome.Google search said to disable the metacity composite manager using gconf-editor but I'm not sure I know how to do it. When I type in gconf-editor it just opens a blank configuration screen . It would be better if someone one can help me how to do it probably on the command line, also what is the equivalent of xorg.conf on F11.
I am running F11 and want to spanky up my Gnome desktop a little by adding the desktop effects. When I try to enable it, my screen flickers then returns simply "unable to enable effects".I don't know where to go from here, I tried to google this but the 15 billions hits made me weep.One link seemed to provide some hope but after following the instructions, things went totally wrong and screwed up my X server; this could be because at first I didn't realise but a default install of F11 puts the PAE kernel on.
When trying to set up desktop effects with Compiz I get this message: Accelerated 3D graphics is not available Desktop effects require hardware 3D support.
I have used Fedora 10 last year and the 3D effects worked fine. I have a Nvidia Geforce 6100 video. I also have another hdd on the PC with Mandriva 2010 which I use and the 3D compiz effects work fine. I'm running Omega 12. Isn't it Fedora 12 w/ codecs added? isn't video detection the same?
Has anyone in here had the luck to enable desktop effects with GeForce 7300 sametime installing the proper geforce 7300 drivers on a twinheaded monitors? Twinheaded meaning im on a dual head monitors.Can't seem to have desktop effects working. I was able to install the nvidia drivers vi installing the rpmfusion repo's and installing kmod-nvidia-PAE.i686 xorg-x11-drv-nvidia-libs.i686. Rebooted and it worked, Now when i try System>Prefs>Desktop Effects i get "Accelerated 3D graphics is not available. Desktop effects require hardware 3D support".
How to speed up the menu "fade" (or get rid of it all together) in desktop effects? I need a composite manager for docky but the slower response on menus annoys me as they have to fade in and out. Anyone know which key in apps -> compiz I should change? Is it one of the plugins or one of the general keys?
I get this Bug report when trying to run Desktop settings from the menu:
Code: warning: section .gnu.liblist not found in /var/cache/abrt-di/usr/lib/debug/.build-id/93/99abcf4da713fff800d716589479f03cdab6de.debug warning: section .dynbss not found in /var/cache/abrt-di/usr/lib/debug/.build-id/93/99abcf4da713fff800d716589479f03cdab6de.debug warning: section .gnu.conflict not found in /var/cache/abrt-di/usr/lib/debug/.build-id/93/99abcf4da713fff800d716589479f03cdab6de.debug