Fedora :: Creation Of Custom Live Image?

May 8, 2011

I updated my step-by-step guide for the creation of a custom Fedora 15 Live image. You can view it here. The previous post for Fedora 14 is here.

View 4 Replies


ADVERTISEMENT

Fedora :: Live Disk Creation & Disk Image Backup

Aug 6, 2009

I need little help on live disk creation and disk image backup.

Can I create live disk using my hard drive installation? If yes then, can I restore the fedora from the live disk to the hard drive. I mean to say that from that live disk can I install fedora again in my hard drive.

Second question is, if I create the disk image of my hard drive( including ntfs & FAT32 partition) , can I restore it in a blank drive. If so , then can os will be restored also?

View 7 Replies View Related

Red Hat / Fedora :: Custom Repository Creation Technique Doesnt Work

Apr 27, 2011

I wanted to create my own folder called /Softwares so that whenever i download a rpm i could place it there , run createrepo and then use yum install software_name.What am i doing wrong am i doing something wrong in the .repo file? The only way i could actually install sskype.rpm is to go in the directory where it was installed and type yum install sskype.But then whats the point of the repository.

View 1 Replies View Related

Red Hat / Fedora :: Creating A Bootable Custom Image?

Apr 1, 2010

I have installed Centos 5.4 and then on top of that i have been installing many softwares over the time ( like pbx system , web console , billing etc.) and now it has come to a quite stable stage. the problem is i have to move this installation to another machine with different config etc. even have to install it on multiple systems. the idea is to create a bootable linux iso of the current machine with all the softwares so i can simply put it in a different machine and make it install and run without much fuss. is creating a linux appliance the only solution ? or is there any way to backup the current machine in an iso format and then install it on another machine? also i would like to make this completely hardware independent.

View 9 Replies View Related

Red Hat / Fedora :: Creating Custom Live CD - Any GUI Tools

Apr 25, 2011

I am using Fedora 14. I want to create custom live cd in Fedora 14. I saw this fedora site. [URL]. But its only used command line tool. Any GUI tools are available to create custom live cd in Fedora.

View 1 Replies View Related

Fedora :: Creating Custom Fedora Install/Live Media

Oct 17, 2009

I've recent begun to want to create a spin of Fedora for my high school to offer as an alternative to Mac OS X and Windows. My first attempt with any distro was to try and use Suse Studio, however nothing with packages that I downloaded myself would successfully compile. I then thought that I might try and use some sort of local program do create it with and tried Revisor, however when I made Live Media, Xorg wouldn't start and when I made DVD Install Media the kernel would kernel panic every time on boot.

Is there anyway to solve the problem with Revisor or are there any alternatives?

I have also tried using Ubuntu with the Ubuntu Customization Kit however that didn't work either considering I have to have it in a virtual machine.

View 1 Replies View Related

General :: Bootable Kernel Image Creation

Apr 20, 2010

the things i've tried:

1. Created an asm bootloader code that calls a c function which just prints a hello message.
2. Compiled both and linked them using LD command using a .ld file available.

Steps followed from http://wiki.osdev.org/Bare_bones.I get a kernel.bin file which is of ELF format. I've set up a tftp server using tftpd32 tool and created the necessary pxelinux.cfg files.

Now how do i create a bootable kernel image out of the elf file. The steps given in the above website to create an image doesn't help.

View 1 Replies View Related

Software :: Composite Image Creation With GIMP

Dec 2, 2010

I have four smaller jpg files, that I would like to merge into one file. Each image is similar in size, and they are color images. The only way I could get close is by creating multi-layered composites, which got really big. The only other way I could think of doing it is with OO, creating a presentation slide, and then rendering that slide.

View 2 Replies View Related

Fedora Installation :: Live Image #1 Not Found

Jan 16, 2011

When trying to install fedora with a 4gb USB stick, I get after partitioning the hard drive the following message: "The installation programme has failed to mount image #1 because it's not on the harddrive. I'm a dutchmen, so I hope this translation is correct.

View 1 Replies View Related

Fedora :: Live Image Or Full Installation

Jun 23, 2011

Is there a way to determine which of Fedora Live Image or full installation image was used to install Fedora on a Hard drive?

View 4 Replies View Related

General :: Fedora Live Image With Grub

Jun 8, 2010

is it possible to boot fedora live cd image from usb thumb drive using grub? im trying to make multiboot usb thumb drive with live option on it, but cant seem to get it to work.trying to load kernel and initrd resulting in this at the end of the fedora loading screen:

Code:
No root device found!
Boot has failed sleeping forever!
Any suggestions would be greatly appreciated!

View 2 Replies View Related

Debian Configuration :: Change Default Editor In Live Usb-hdd Creation?

Apr 29, 2011

Howto change default editor by live usb-hdd creation? Normally, I can change from the command line:# update-alternatives --config editorbut howto put it into live config?

View 1 Replies View Related

Fedora Installation :: Live CD Versus DVD Image Install

Feb 14, 2009

I recently started trying fedora 10 out on live cd (in my case usb ) and loving it. I want to install it, should I get the dvd image, or would it be okay for me to just install off live cd (usb) and install whatever I want through the package manager later... Why/why not? Also on live usb, I can't find the package manager under applications.

View 7 Replies View Related

Fedora Installation :: Loading Live Image With Boot DVD

Jun 11, 2009

Yesterday, i just got my Fedora live DVD. When i tried to boot it from my CD/DVD ROM drive, it seems to hang when it's just about to finish loading. From one of the prevous threads, one of the members said that i had to have 2 partitions on my HD. Currently, i already have 2 partitions. Can someone give me advice on what to do??

View 3 Replies View Related

Fedora :: Persist Boot Messages On USB Live Image?

Sep 16, 2010

I've a headless custom device that boots from USB using live image. Since I cannot access the device through the network, I need a way to persist boot related log files (dmesg, boot.log, messages) to view them on another computer. I also need to know how can I run custom commands on startup of live image.

View 3 Replies View Related

Fedora Installation :: Late Init Script For Live Image

May 26, 2011

I installed Fedora 13 and on my new laptop and tried upgrading to F15 and it gets stuck at "Late init script for live image".I've been searching and seen threads in the F15 Dev forum that I cannot reply to. I do not have akmod or kmod on this machine.I can get to a terminal, I have an SSH Server I installed before it broke. When I press ESC at the boot screen the last thing I see says "Late init script for live image"

View 3 Replies View Related

Red Hat / Fedora :: Persist Boot Messages On Fedora13 USB Live Image?

Sep 16, 2010

I've a headless custom device that boots from USB using live image. Since I cannot access the device through the network, I need a way to persist boot related log files (dmesg, boot.log, messages) to view them on another computer. I also need to know how can I run custom commands on startup of live image.

View 3 Replies View Related

Fedora Installation :: Error W/ F13 Install To HD During Copying Of Live Image To Disk

Aug 25, 2010

I'm a Linux newbie and are trying to install F13 from bootable USB onto the HD of a DELL mini netbook. I've followed the install wizard's defaults including the "Use All Space option." The install errors out at about 20% of progress during the "Copying live image to hard drive" process. The error dialog is as followed:"There was an error installing the live image to your hard drive. This could be due to bad media. Please verify your installation media..." and it comes with options to Exit installer or Retry. I have since retried and restarted several times and still came to the same error. FYI, I've initially attempted to install F13 to the HD over an existing Windows XP.

View 2 Replies View Related

Debian :: Custom Image Hangs

May 31, 2015

I'm working on a custom Debian "spin" (one customized for personal/work use). I did this once before with an Ubuntu build, but attempting it with Debian has loaded me with a steady flow of walls (everyone loves debugging!). Despite a variety of approaches, none of my images seem to boot. I've tried the following with both SysV and systemd. the search results I find are vague, at best. I'll attempt to categorize and explain this as intelligently as possible.

A variety of ISOs were tried in Virtualbox, so these are the errors they're yielding; I'm currently down on removable media since I loaned my flash disks to a couple students for their finals, so I can't boot that way until Tuesday. I really hope that the error is something that can be identified regardless of whether or not I'm using a virtual environment.

Method 1: This Guide
This appealed to me the most at first because I run a stripped-the-hell-down version of Ubuntu on my work laptop. (Wheezy/Haswell yielded unfavorable results, and at the time Jessie's SysV compatibility was undesirable, but I'll probably switch back by the end of the week if possible.) I have a feeling that this guide may simply be obsolete, or maybe I'm just neglecting a crucial step. Here's the output: a lovely kernel panic.

Method 2: refractasnapshot
With it properly configured (and with syslinux-utils installed -- head-on-a-stick and fsmithred), I tried two different approaches: the first, I ran it within the chroot environment mentioned above; the second, I created a Virtualbox build and ran it within that. Both yielded the same errors:

For each, I received two complains: about piix_smbus and no valid rapl domains, and the system hangs indefinitely (ie, all night). Following some search results, I blacklisted i2c_piix4 and paevm, then rebuilt the image, and mounted it in VirtualBox. At boot:

Code: Select allEDD: Error 0c00 reading sector 276375
No DEFAULT or UI configuration directive found!
boot: _

View 5 Replies View Related

Ubuntu :: Desktop Icons Creation And Panel Content Creation After Login Getting Slower

Nov 17, 2010

I've been running 10.04 since September on my new MSi i3 notebook and about two weeks ago I noticed that when I login after system boot, propagation of icons on my desktop and the content of my Panel have become slower and slower.If I logout and login again the propagations are not slow.

View 1 Replies View Related

Debian Configuration :: Install Custom Kernel Image

Mar 11, 2016

I've a problem running jessie on a XEN supervisor; my running kernel and the installed kernel image differ, because the host system forces the kernel at boot time. Current loaded kernel is

Code:
Select all$ uname -r
3.18.12

But I'm not able to install this version from the standard repository.

Code:
Select all# apt-cache search linux-image
linux-headers-3.16.0-4-amd64 - Header-Dateien für Linux 3.16.0-4-amd64
linux-image-3.16.0-4-amd64 - Linux 3.16 für 64-Bit-PCs
linux-image-3.16.0-4-amd64-dbg - Debugging symbols for Linux 3.16.0-4-amd64
linux-image-amd64 - Linux for 64-bit PCs (meta-package)
linux-image-amd64-dbg - Debugging symbols for Linux amd64 configuration (meta-package)
nvidia-kernel-3.16.0-4-amd64 - NVIDIA binary kernel module for Linux 3.16.0-4-amd64
linux-image-2.6.32-5-xen-amd64 - Linux 2.6.32 for 64-bit PCs, Xen dom0 support

Now I'm facing issues loading kernel modules for iptables, because the module path does not exist. Is there an easy way to install a proper kernel image from the standard repositories?

View 5 Replies View Related

Ubuntu :: Creating Custom Live Cd?

Mar 6, 2010

I am in the tasks section of the following tutorial [URL] I did the list package thing to see what packages there are. However now I cannot leave the list in order to run the purge command. How can I get back to the previous section so I can remove packages from the custom live cd. I want to make sure I am editing the live cd and not the current install. I am going to make two images. One cd that will still have a gui but I plan to build as a recovery tool. The other one is a dvd and will be for installing everything I want on any machine. I am doing the tutorial with Karmic. Also I have cursors, themes and icons I installed from gnome look. I then went to customize and created my own personal mix I like. I would like to make this a standalone theme and come as the default theme on the live cd and dvd. I have no clue what I am doing, however wish to learn to build my own custom live cd. Also I would like to know how to ad repositories to the live cd and how to add programs pre installed that are not usually included.

View 2 Replies View Related

Ubuntu :: How To Create A Custom Live Cd

Jun 11, 2010

I'm sure this is possible to do, but how do I create a Ubuntu install cd that uses my current config. Ideally I would like to be able to install exactly what I have on my system now, without user files. Wine, Ccsm, amarok, audacity, themes the whole nine yards. I tried using a program called Ubuntu Customization Kit, but it wouldnt let me mount the normal ubuntu install .iso file. This would avoid the hour and a half post-install config every time I screw Ubuntu up as well as stripping off many of the programs I don't need...

View 3 Replies View Related

Ubuntu :: Create Own Custom Live Cd?

Aug 31, 2010

I want to create a custom live cd of off peppermint os one. I want to add specific software, and delete some packages i don't really need. How can I do this Reconstructor is not what i want, because i am forced to use Ubuntu or Debian,
remastersys doesnt work for me since I see no option in using peppermint one as a live cd.

View 6 Replies View Related

Ubuntu :: How To Make A Custom Live USB

Apr 27, 2011

how to make a live cd how can I put it on a usb stick. [URL] Also in the article you install skype etc. but where did they get the path to donload skype etc. I might want to add more software.

View 9 Replies View Related

Ubuntu :: Create A Custom Live USB?

Jul 4, 2011

I'm working to setup an small PC as a kiosk, I was able to create an USB pen drive with ubuntu 10.10 with a persistent area and I made all the changes I need, everything works but if the PC loss power in most of the cases the file system is corrupted. Now I'm trying to generate a non persistent USB drive, but I'm having some problems. I was able to install remastersys and create an ISO image of my system (dist) but when I tried to create the USB drive using different Programs, in all cases I get the boot menu but it never complete the login, it just try to keep booting. The only messages I saw when I create the iso image is a bunch on chown operation fail from remastsys, I'm not sure if it is part of the problem. how to create an USB read only from a persistent one ?

View 2 Replies View Related

Ubuntu :: How To Create Custom Live CD / DVD That Uses Less RAM

Nov 22, 2008

Is it possible to create custom Live Linux cd that consumes less RAM by limiting its functionalities?My laptop has 448 mb RAM and I want to run the LIVE CD along side windows xp pro(using VMware Player). I have tried a few Linux live cds but all of them are very slow when I run them inside xp!! I want to create this custom live cd so it only have firefox browser (latest version) pre-installed along with flash player (Latest version) and ability to hear voice when playing ..... videos. (I want omit the rest of programs in order that Linux runs faster). Is it possible to gain speed by omitting un wanted programs? How I can create such LIVE cd with limited functionality and fast performance.

View 7 Replies View Related

Ubuntu :: Ubiquity - Custom Live CD Name

Sep 10, 2009

I am trying to make a Custom Ubuntu Live CD using Remastersys and an installer for the Live CD using Ubiquity. I was able to successfully create a Custom live CD using remastersys and when I boot from the custom Live CD the grub correctly displays the Custom Live CD Name that I specified during the ISO file creation using remastersys. However, when I install from the Live CD that I created, using Ubiquity, after reboot, the Grub menu displays as Ubuntu and not the Custom Label. How can I change it so that after installation, the custom Live CD name is displayed?

View 3 Replies View Related

Fedora Installation :: Erratic Install Results W/initrd - Custom Spins With Custom Drivers - Modules?

Dec 28, 2009

Just spent three whole days barking up the wrong tree, solving Fedora 11 and Fedora 12 boot failures because the correct hypothesis was illogical: installation did not update/modify the initrd.

The first couple of times I installed Fedora 11 on the HighPoint Technologies RocketRaid 2640x4, the installation inserted my "custom" driver module (rr26xx) into the initrd, permanently, so that the system booted off the controller card for which the custom driver was inserted. (I yelled about this success in this thread: [url]

My most recent installs of BOTH F11 and F12 on the RocketRaid failed to properly set up the boot. It turns out that the "rr2640" module I "slipstreamed" into the installation process was *NOT* permanently added to the initrd by anaconda. (F12 gave me "no root device found boot has failed, sleeping forever", on boot; F11 hung also, without such error, I presume, during the init script execution). Because of limited resources and time, I only know for sure the module was missing from the F11 initrd, and am ASSUMING the same was the case with F12.

The only difference between the successful installs and the ones with failed boot is that the successful installs were made on a single-drive (JBOD) mode on the controller; whereas, the failed ones were placed on RAID 5. But, AFAIK, the created logical device for the card is "/dev/sda", in both cases, and the kernel can not distinguish between the two cases (or can it?). Thus, the inconsistency cost me a lot of time, and is still inexplicable to me.

Question: What is the best way to deal with custom drivers, today? There are custom spins, and many tools, like isomaster. Stupid question: Is there a way to modify the initrd inside an installer ISO -- be it for CD/DVD/USBboot drive -- beefing the init RAM disk with whatever modules you'd like, for the boot process (using, say, isomaster)?

And what makes anaconda understand that a module must be added to the initrd ? How can one force anaconda to do so?

How does moving to dracut as the initrd tool affect any/all of the above?

View 1 Replies View Related

Debian Configuration :: Creating A Custom Live CD

Feb 24, 2016

I'd like to create my own custom Debian live CD — the idea being to have my own rescue CD with my favorite Debian tools installed. I read about bootcd and was going to give that a try, after creating the ideal system in a qemu virtual machine.

How much exactly can you install on a system so that bootcd can still fit it on a CD? I'm presuming there is some kind of compression involved. When I tried to create my VM, I coudln't get Jessie + LXDE to install onto a 2GB virtual drive (net install) so naturally I'm wondering what I'm going to be able to put on a 700MB CD.

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved