Fedora :: Cant Go Past The Login Screen?

Sep 14, 2009

I installed the following packages in order to install kscope in my Fedora 11.1. kdelibs-devel2. kdebaseAfter I restarted the system, the options of GNOME and KDE sessions come to the login screen. Also, when I enter the login credentials, the username and password are accepted, the login chime sounds, and i m thrown back to the login screen

View 3 Replies


ADVERTISEMENT

Ubuntu :: Can't Get Past Login Screen

Mar 8, 2010

I have been using Ubuntu 9.10 for about two months now and it became my primary OS. I was in a hurry last night so I powered off laptop in a "bad way" - pressing the off button while the computer was running wipe. Today I tried to start Ubuntu but I can't get past the login screen which, also, looks like it switched to a "simple" theme - like in Windows xp when you turn off theme and GUI switches to "simple" theme. On this same screen there is a message saying something like "Configuration error! Power manager configuration isn't configured correctly." in the upper right corner. f I enter my username and pass it just resets to login screen again after a few seconds.

View 1 Replies View Related

Ubuntu :: Can't Get Past Login Screen In 10.04

Sep 9, 2010

I am trying to get Kubuntu 10.04 to work. When I install it on this PC, it works up to the login screen. When I login, it acts as if it were logging in. But then it takes me back to the login screen. Ubuntu 10.04 works fine on this PC, but I prefer KDE. Could this be a problem with the graphics card?I can't even use the basic desktop effects in Ubuntu (gnome)

View 4 Replies View Related

General :: Get Past Login Screen?

Apr 13, 2010

I am trying to create a script that I can save on the desktop of my Primary computer and have it log in (get past the log in screen on the remote computers, and the banner) to multiple computers with the same user name and password in a LAN that is not connected to the internet.I am also trying to create a script that starts a script on the desktop of these remote machines ON the remote machines, but I think I am on the verge of figuring that one out with the "expect" command in a script.

View 11 Replies View Related

General :: Can't Get Past Login Screen In Ubuntu 10.10

Oct 29, 2010

i'm running ubuntu maverick on a dell laptop and it was working flawlessly until the audio started stuttering so I looked up a possible cure for it. I came accross a post that said uninstalling pulseaudio would cure the problem - so i did through software centre. When I was uninstalling it there was configuration files to uninstall as well. When I shut down the laptop and tried to restart it, it goes to login screen with my name but when I click on login it goes back to the same screen. This is the first time this has happened and im not sure what I can do.

View 14 Replies View Related

Ubuntu :: Karmic Stuck Past Login Screen

Jan 29, 2010

I made a little change this morning on my karmic laptop, and now after it boots up and I enter my username/psswd, it remains perpetually stuck on the loading page that usually shows only for a couple of seconds. I never actually get to my desktop.

This morning, I thought I would try adding another panel to my Desktop, but I thought that if I added it with the position 'top', it would automatically pop underneath my default top panel. So I would have two panels one under the other, like you often do in firefox. I also immediately set my new panel on 'auto-hide'. Right after, the new panel showed up ABOVE my default panel (like z-axis, covering my default panel) and my screen was absolutely frozen. All my desktop icons disappeared and mouse clicks and keyboard strokes would do nothing.

I was forced to hit ctrl+alt+f3 and do a reboot. Ever since, I have been stuck in this mode. Perhaps if I could access the config file for desktop panels (if there is one), then I could try and revert my changes.

View 2 Replies View Related

Ubuntu :: Can't Get Past Login Screen In 10.04 Lucid Lynx

Jun 11, 2010

I installed Ubuntu for the first time yesterday by running Wubi on Windows Vista Home Premium. For all of yesterday and up to lunchtime today Ubuntu was working fine. I followed the instructions on a forum post to remove Evolution Mail via the synaptic applications menu. I proceeded to log out of Ubuntu and reboot (I hoestly can't remember what for) Anyway, ever since I have not been able to log in to Ubuntu. I enter my username and password as normal and they are accepted, however moments the log in page displays again. This continues in an endless loop. The password is definitely correct because I get an authentication error if I enter anything else. I know I am not the only person experiencing this issue.

View 9 Replies View Related

Fedora :: X11vnc Screen Size Don't Update Past 800x600?

Feb 10, 2011

How come on x11vnc, with Fedora 12 PPC/x86/x64, my screen sizes can't be greater than 800 x 600, and they don't update when I change them in Displays. On my Ubuntu installations the x11vnc screen sizes update and can be basically any size selectable in Monitors.

View 1 Replies View Related

Fedora :: Cannot Login Into X Window(screen Turn To Black Before Login Screen)?

Feb 25, 2011

The problem come after i kill the Xorg using the kill command,and the screen turns to black without anything so that i can do nothing. The problem goes on after reboot

View 5 Replies View Related

Ubuntu Installation :: Freeze Screen After Reboot And Get Past The Splash Screen?

May 12, 2011

When I install Ubuntu 11.04 with Wubi, I get this freeze screen after I reboot and get past the Ubuntu splash screen: url

As you can see, it's a scrambled picture of my Windows desktop. This happens with every other version of Ubuntu also.

I'm running a 64-bit PC and I don't wanna waste another CD or use a USB to install, because I actually progress further in my efforts whenever I use Wubi.

View 6 Replies View Related

General :: Dell Studio 1535 Screen Resolution - System Won't Get Past The Loading Screen Anymore

Aug 4, 2010

Unfortunately my experience in the Unix* based world up to this point has only been using web servers and administrating them, no GUI experience of any kind so I am completely unfamiliar with the setup and entire usage of Xorg or any other Window manager at this point. The issue I am having is with the screen resolutions I am being allowed to chose for my Dell Studio 1535 running Fedora Core 13 and the KDE 4 desktop GUI, thus my issue since I am not really familiar with how to run a Unix* based GUI in the first place.

The basic information, if there is more needed just advise what and what command gathers that info (or what conf/log I should look into in order to find it). Laptop is a Dell Studio 1535 Video is the Mobile Intel GMA X3100 ATI Radeon HD 3200 Graphics. LCD interface is the LVDS.

So far it seems to give me modes for 1024x768 and on down, nothing above this. I believe I am supposed to use the radeon driver being that is the type of card it is but every time I change the xorg.conf file to use this instead of vesa the system wont get past the loading screen anymore upon reboot and nor can I seem to find a way to bring up a command line so I can hit up the Xorg.0.log to see what is wrong or change the xorg.conf file back to the original driver it had listed.

I am going to assume this is a missing driver or something else it hangs on but without being able to get access back to the system and having to rebuild it again (re-install via live CD) I am basically out of luck at this time. Sorry for the rather poor post but I do hope to receive some basic directions on where to go from here with this issue

View 12 Replies View Related

Ubuntu :: Can't Login - Can't Get Past Name Selection

Jun 6, 2011

I can't seem to login into ubuntu this morning. I'm using 11.04 64 bit. It's been working fine for a few weeks, but this morning I select my name with the mouse and it just returns to the same initial screen after a millisecond. The password box does not come up.

The last thing I did yesterday was add another user - would that have caused any issues (or a red herring)?

I went to a terminal and deleted that user (sudo userdel -r <username>) but that hasn't helped.

View 9 Replies View Related

Software :: Can't Get Past Ubuntu Login Page

May 14, 2011

I have Ubuntu 11.04, last night I installed GAdmin-Squid. This morning, I woke up and I can't get past the login page of my computer. Whenever I enter my password, it just returns me to the login page. I've tried sudo apt-get install --reinstall ubuntu-desktop, but that didn't fix the issue.

View 5 Replies View Related

Ubuntu :: Changed Username Now Can't Get Past Terminal At Login

Jun 22, 2010

When I login, all I get is a terminal in the upper left-hand corner of the screen with the wallpaper in the background.

I uninstalled what I thought were random orphaned packages relating to evolution (evolution-data-common, etc..) Turns out that this uninstalls gnome-panel as well, although it didn't warn me. Reinstall gnome-panel and it will reinstall the required packages (you can still run synaptic from terminal!)

View 2 Replies View Related

Ubuntu :: LiveCD - Can't Get Past Login & Password - Puter Just Hangs

May 23, 2011

I'm in LiveCD (Natty) I blew up the OS. Can't get past login & password. 'Puter just hangs there. I'm going to do a clean install, but want to make a copy of my /home. I tried gksudo nautilus to copy all of /home to an external hard drive (via USB). It won't copy all, saying that I lack permissions. I've read about recursively copying, etc. and cannot make out the sequence I need. I must copy all that is in my /home and preserve all the links, dependencies, file and directory ownership permissions and also must get the command for copying them from the external hard drive if the clean install goes bad.

[Code]...

View 3 Replies View Related

Ubuntu :: Can't Get Past Log In Screen.

Apr 24, 2011

I had uninstalled pulseaudio and it's related libraries, then I rebooted, and now I can't log in.

Also, the log in screen looks different. Where it used to have the ubuntu logo, it now has a computer monitor icon.

Logging in from the command line works.

I tried reinstalling pulseaudio with

Code:
sudo apt-get install libasound2-plugins "pulseaudio-*" paman padevchooser paprefs pavucontrol pavumeter

View 3 Replies View Related

Ubuntu :: Can't Get Past The Second(?) GRUB Screen

Jan 10, 2010

I installed Ubuntu 9.10 recently using the installer (which was awesome, I've wanted to install Ubuntu again for awhile now but I didn't have any usable CDs and that wasn't available before or I was blind). I'm dual-booting with Vista 32 bit and it was working fine as far as I could tell for a week or two... but I noticed a few days ago, when I would try to boot into Ubuntu, once I selected 'Ubuntu' and then got to the screen where I'd normally ENTER on the 'linux-blahblahblah' thing, it's a command line. I can't get much out of it because half of the first word or so is too far to the left of the screen, I'm unable to read it.

I don't have the time to figure out what I'd search for for a fix for this. I'm only just now getting around to seeing if it would do it again today.

View 2 Replies View Related

Ubuntu :: Won't Get Past Splash Screen

Sep 3, 2010

I just used the update manager to update to the latest kernel. There were other updates there, but I can't remember what all they were.

Now the computer won't get beyond the splash screen. I waited about 15 minutes the first time for it to load. When I hit esc during the splash screen, I got this warning

Code:
GLib-WARNING **: getpwuid-r(): failed due to unknown user id (0

After that I think there is more, but my screen runs out of room, but I have this sense that there is more.

Anyway, that might have nothing to do with the problem. When I boot to recovery mode it finds all the stuff plugged in to the motherboard and USB drives then just stops.

Booting to the old kernel works just fine.

View 9 Replies View Related

Ubuntu :: Can't Get Past The Boot Screen?

Sep 30, 2010

I'm running Ubuntu on my desktop. I have a dual-boot option between Ubuntu and Windows Vista. When I woke up this morning, my Ubuntu screen was frozen so I attempted to reboot...but I couldn't get past the boot screen. I can get into Windows just fine, but selecting Ubuntu just keeps cycling me through the initial boot screens over and overI am a still a beginner so please talk to me as though I were a child. Otherwise I'm sure I'll be confused.

View 3 Replies View Related

Ubuntu :: Can't Get Past Plymouth Screen

Nov 21, 2010

I am trying to boot in to ubuntu 10.10 from a usb on my desktop but i can't seem to get past the purple screen with "ubuntu" and the flashing dots. The purple dots scroll for a bit but then all turn purple. I'm trying to do this on a hp compaq with a pentium 4 and from what i can tell nothing is wrong with it.

View 1 Replies View Related

Fedora :: Fedora Live Cd - Screen Goes Blank Right Before Login Screen Loads?

Mar 10, 2010

I am trying to install fedora 12 on my computer. I have burned the live cd ISO and it works just fine until right before it shows the login screen. I suspect that it may have to do with my ati radeon 9800 graphics card. give me some boot options or some such thing so that I could install fedora on my computer. Also some other specs

ASUS A7N8X Mother Board
AMD Athalon XP
1GB ram

View 5 Replies View Related

Debian Multimedia :: Icedove - Can't Get Past Welcome Screen

Oct 8, 2015

I recently reduced my /home by shrinking the LV and creating a new FS on /home. By this I deleted all data in /home of course, which is no problem. Though when I start Icedove now, I can't get past the welcome screen.

There is an input field to search for a provider for a new free mail account and 2 more buttons to either use an existing account or skip the whole wizard.

No matter what I enter or what button I press, the welcome wizard window stays put. Nothing works. Clicking the buttons turns them dark for the moment but nothing happens.

I did a Code: Select alldpkg-reconfigure on the package, have removed Icedove with apt's purge option, deleted the cached installation .deb etc., did an autoclean and so on... but no way to get past this welcome wizard at the startup.

The only way to get out there is to kill the process.

View 8 Replies View Related

Ubuntu :: Computer Will Not Go Past Motherboard Screen

Mar 30, 2010

I'm running a dual-boot with Win7 64-bit and ubuntu 9.10 64-bit. I installed Win7 quite a while ago and ubuntu was installed this last weekend. It's been running happily and until now I have been very impressed, in fact I've only booted win7 once after installing ubuntu and that was just to make sure it was still working after resizing the partition.

I'm now running ubuntu from my installation cd in "run ubuntu without making any changes". Because when I turn-on my computer it simply will not go past the "motherboard-screen", if you know what I mean. It's a HP so I had some kind of "pc doctor" or something in the motherboard-screen. I was able to run that and it passed everything; cpu, ram, HD... So it seem like the hard drive is fine. Any thing that can make my computer working or allow me to back-up my files.

View 4 Replies View Related

Ubuntu One :: Installing From USB Does Not Get Past Loading Screen

Jun 11, 2010

I got a usb with ubuntu 10.04 on it. Was messing around with this ubuntu last nite and really borked up my system. :S so decided on a fresh install (since ubuntu doesn't really have a system restore as far as i know)I originally installed Ubuntu on this machine with usb(EEE pc 1001p) but when i'm trying to do it now, after i click "DEFAULT" from the menu and goes to loading screen, it loads forever... i waited for about an hour and still loading (not frozen since the loading bar is still moving)

View 1 Replies View Related

Ubuntu :: Unbuntu 8.04 LTS - Can Not Get Past EULA Screen

Jun 17, 2010

I have a dell inspiron mini which came with unbuntu 8.04 LTS mini standard edition pre-insatlled and a recovery disk. However i would like a more accessible OS and have been trying to install windows xp but i can not get past EULA screen. I have tried this with different (new) copies and checked if the buttons involved are working properly they are. i have also tried to make a boot disk for ubuntu following Internet guides but apparently this version does not support that option.

View 5 Replies View Related

Fedora :: 13 - Screen Goes Black For A Few Seconds And Then Returns To The Login Screen

Mar 7, 2011

This problem started within the last few minutes. I run a program in my browser that uploads data from my machine (ubuntu) to another machine (Fedora 13), for manipulation and then spits back the data that does not match our standardised information.

When I tried to run it a few minutes ago, it seemed to take a long time to make the connection. I went back and checked the machine, everything was connected and fine. I decided to reboot the machine from within KDE and then try again. Same result. I went to the machine again and tried to login through KDE, the screen goes black for a few seconds and then returns me to the login screen. I switched over to a virtual terminal and was able to login using the same credentials. I checked the .xsessions-errors file and this is what I am seeing:

[Code]....

View 1 Replies View Related

Ubuntu :: Login To Xfce The Screen Goes Black - Flickers A Few Times Then It Brings Back To The Login Screen

Apr 12, 2011

My last setup (years ago) ran fluxbox so because it was familiar I installed it as a secondary to xfce right off the bat. I download a lot of different stuff because I like to try out all the apps I can find but somewhere I broke something. I can still run fluxbox fine, but nither the Xubuntu nor Xfce sessions will run now. Last thing I remember changing was pulse audio(removed it for an experiment I was trying with jack audio), not sure if it is connected but when I try to login to xfce the screen goes black, flickers a few times then it brings me back to the login screen.

I tried failsafe but everytime I do my monitor gives me a "frequency out of range" error. I tried purging and reinstalling xubuntu desktop and xfce settings but I am thinking its my xorg config. My laptop is a Toshiba satellite M305D-s4830 with ATI Radeon 3100 mobile graphics card and I am running Xubuntu 10.10. Unfortunately I also broke the screen, so right now I am stuck with an external monitor till I get a new one.

View 1 Replies View Related

Ubuntu :: Can't Get Past Default Key Ring Password Screen

Sep 22, 2010

I installed a couple of updates that the update manager said were important the other night and now I can't get past the default key ring password screen. Only the mouse works (USB); the keyboard has no response.I know the password but I just can't get the keyboard to work.

View 1 Replies View Related

Ubuntu Installation :: Installer Won't Continue Past Second Screen?

Jan 31, 2011

I'm having trouble installing Ubuntu Netbook edition (v10.10) on my (brand new, No other OS installed) Asus Eee PC 1215T. I've successfully booted from the flash drive and can "Try Ubuntu," and everything works when doing so, however when I try to install it, the installer freezes on the second screen, right after language selection. To be a little more specific, that's the screen with the checkmarks next to "has at least 2.5 GB available drive space," "is plugged in to a power source," and "is connected to the Internet."

After I hit the "Forward" button on this screen, I just get an infinite wait cursor. I can still freely check and uncheck the boxes, and click the "Quit" button, so it's not entirely frozen, but it just won't progress any further.

I had this *exact* same problem just over a week ago when I tried to install Ubuntu on my desktop, also using the flash drive method. I ended up using the Windows installer to get it installed on my desktop, but as the netbook doesn't have any OS installed, that's not an option this time.

View 7 Replies View Related

Ubuntu :: LiveCD Does Not Get Past Initial Screen / Troubleshoot It?

Apr 5, 2011

My laptop recently died and I have invested in a new desktop. The specs are as follows code...

Anyhow, I had been running 10.10 on that laptop. Everything ran swimmingly (until the internal components died of course). I am currently running XP on the desktop and am looking to run 10.10 again as a dual boot. I already partitioned off 200gigs for Ubuntu upon set up of XP. I have tried using the USB LiveCD I used for my first install on the laptop, as well as a LiveCD CD I had created for the laptop. Neither one worked. The LiveCD came up with an error and the USB got to the point where there was the purple screen with white dots and it never got past that point.

I downloaded a brand new 10.10 disc earlier today and I got to the point where the white line blinks on the black screen. Unfortunately that is as far as the boot got. It has some initial writing at the top of the screen saying it was loading a process, and then it produced an error of a int file of some sort. I'll go back and try it again and get a better grasp on the error. Also, after the error message I was given the ability to type commands (it actually told me to type 'help' for a list of the commands available to me), but I had no clue what to do with them.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved