I have an IBM X3250 M3 server were Iam trying to install Fedora 9 version on RAID 1 and am unable to configure it. Some body guide me with LAN card driver for Inetl 8000 series Gigabit NIC card driver for fedora 9.
Here goes the problem: I have a Amilo M7400 notebook with an Intel 82852/82855 GME video card, and X is a bit uncompatible with it.I've tried using the vesa driver in the xorg.conf, but when i start Xserver, it hangs hard in a blank screen. I can't open a new terminal and control+alt+backspace won't work.
what can i do? is there a log file for X which details the initialization of it?
i am using fedora 14. i need graphics driver for Intel 82579v . while moving folders it shows poor graphics.Login screen open as step by step. while playing videos ,it hang.my system is very slow now with high configuration. My system hang while improve graphics option in System-> Preference->Desktop Effects and select compiz and
I want to downgrade my Intel driver to version 2.11.0. I don't know what version I have at the moment but I have installed Fedora 15 (Lovelock). The reason is that Office 2007 has graphical bugs with Intel drivers that are newer than 2.11. So, will my gnome shell work fine after the downgrade and how to downgrade? I have searched a lot from google but didn't find any solutions.
My lap has a "Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03)" video card, and never took the 1280x800 resolution (that I had on windows). I searched a lot, and I installed a driver from the package manager (can't remember the name ...). Well, restart, and it's stuck at the finish of fedora loading process (a blank line).
I can access to the terminal (ctrl + alt + f2) and modify kernel parameters. By the way, on gnome I could't enter to "Desktop Effects" (it threw an message like "can't enter 3D Acceleration")
I just received a laptop hp Elitebook 8560p, i installed fedora 14 on it. Archi : Linux 188.8.131.52-92.fc14.x86_64. So I installed without probleme the ethernet driver e1000e, but the wifi become a problem ! The wifi card is an intel centrino advanced-n 6205 agn. So I google it like other people and i found this :
http://intellinuxwireless.org/?n=downloads I downloaded the iwlwifi-6000g2a-ucode-184.108.40.206.tgz and i copied the ucode in /lib/firmware and reload the iwagn with rmmod iwagn and modprobe iwagn as the link say.
It doesn't work, i tried with compat-wireless too, not succeed.I have any problem message in dmesg.
I recently swapped out my old network switch (10/100) for a Netgear GS105 gigabit switch. With the exception of my Fedora 10 laptop all the rest successfully connect at gigabit speeds. But my laptop (with an Intel Corporation 82566MM Gigabit Network Connection (rev 03)) will only connect at 100Mbps. If I look in the logs for my network card here is what I get:
I have Dell 1537 laptop having Intel 5100 wireless card. It is not supported by Fedora 9. I have tried downloading the driver iwlwifi-5000-ucode-220.127.116.11.tgz from URL...Downloads and copied it to folder /lib/firmware and rebooted the machine. But still it is not detected by the system. Is there any solution to this problem .
I recently installed Fedora 12 and have tried it in different machines with different results. I am using HP laptops and can boot with no issues in one of them (HP NX7200), boot with compiz limitations in another (Compaq 6910p) and almost never get a proper boot on another (HP EliteBook 6930p). This last one is the one I want to check on, because even if I have got it to boot properly, most of the time it fails. I get to the login screen OK, but when trying to load the desktop, it usually fails and sends me back to the login screen. The driver in use is i915. I have tried to generate an Xorg.conf file and add a specific option, which I got from other people having the same issue. Here's the display section from my xorg.conf file:
Looking into the last few lines from my Xorg.0.log file, I could see segmentation faults and messages that showed how the server was killed and the system would drop it. ometimes I can get this machine to boot (in fact, I am typing these lines from it). To achieve that, I run
su -c system-config-display
on one of the other laptops that work. That allows me to boot fine at least initially. Every time I get that right, I get a kernel crash message, which reports the following:
------------[ cut here ]------------ WARNING: at drivers/pci/dmar.c:616 check_zero_address+0x7d/0x191() Hardware name: HP EliteBook 6930p Your BIOS is broken; DMAR reported at address zero!
If I reboot/shutdown, I won't be able to boot again until I repeat the same workaround.
For those who want use in VMware guest 3D games or any, using intel graphics... (who cant enable it ) You must enable S3TC texture compression even if your card can't enable it!The software you must use is DRICONF... You can Download it at the package manager...
I recently tried to install the proprietary nvidia driver to my laptop, but after disabling nouveau have run into a problem. When I start X I get an error
Code: (EE) No devices detected
Fatal server error: no screens found
I believe the computer is trying to use the on-chip intel card instead of the nvidia card because "dmesg | grep video" specifies "pci 00:02:0: Boot video device", "lspci | grep 00:02.0" gives me "VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02)
I have googled this issue all day and have not found a solution that works for me. nvidia-xconfig does nothing as doesn't "nvidia-xconfig --multigpus=on". Is there a way to specify which video card my laptop uses on boot? Maybe which my xorg.conf uses?
Installing new Intel server S5000VSA (Sapello) motherboard with RAID 1. Downloaded F10 32 bit DVD and run install. Everything works fine and select Samba and all that. Install completes but on reboot get a blank screen.
I know with Windows one has to load the RAID driver off the Intel driver CD, so guess that is the problem. But how do I do this in Fedora? Question: How do I get to select the Intel RAID driver in the install process? There does not seem to be any place to stop and make this selection. I tried selecting the Red Hat and Suze installs on the Intel configuration assistant but it then reboots and that is it. In Windows it would ask to insert the Intel driver CD but that does not happen. So I am stuck. I loaded Fedora some 3 year ago and like it but then it was not on a RAID setup. I created a VMWare install on my desktop and did the same install options and it works. So the DVD seems fine.
i bought a new laptopt Gateway, core i3, intel video card. I've tested ubuntu and mandriva without good video results. I have installed Fedora 12, i'm using an external lcd samsung screen on the vga port, it works fine. My display properties shows two screen as well as the correct resolutions...the problem it that i can't use my latopt screen, i have tried different resolutions..but nothing. I can't use mi laptopt without an external screen.Even if i boot without my external screen, my laptopt screen goes black.
I'm a Fedora 12 user on an HP Pavilion dv4 laptop. I'm currently using kernel 18.104.22.168-99.fc12.x86_64, graphics driver xorg-x11-drv-intel-2.9.1-1.fc12.x86_64, and mesa 7.7-4. My graphics card is an Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07).
I've been having some problems getting my 3D acceleration to work. Although it worked correctly in Fedora 11, I have not been able to get it to work yet in Fedora 12.
The output of glxinfo shows:
Running glxinfo with LIBGL_DEBUG=verbose shows:
I found a similar message here: [url]
However, I'm not sure if this is the same problem I have. What does the drm_intel_bo_busy message mean?
I have installed xubuntu 10.04 on a HP Pavilion dv1049ea and am having trouble installing the drivers for the graphics card. When installing i had to use the boot option -xforcevesa in order to get the screen working. Now that it is installed there is constant screen flicker but apart from that all other aspects of the system are working fine. In the display menu i am unable to change the refresh rate. How do i change the running driver from vesa to the correct intel driver? The graphics card is an Intel Graphics 82852/82855.
i upgrade a machine running centos 5.4 to 5.5 this morning. After the update the X start i saw the pointer and a black backgroud only the desktop doesn't appear.The machine is a barebone with this configuration
I have installed Fedora 14 on Intel's DH67BL mother board, which has a on board LAN port, Fedora 14 does not detect on-board LAN. Unfortunately, intel does not provide any driver support for linux OS :-(. However, if I install an additional LAN card, Fedora 14 detects it and everything works fine.
I am using a Dell Latitude E6510 with QM57/QS57 Intel GMA HD chipset video card, when I am installing the Fedora 14, if I choose the 'Install the new system or update an existing system', it goes to blank screen.if I choose the 'Install system with basic video driver', it starts to install.BUT I cannot use the desktop effects, the Stellarium, etc, it says that 'accelerated 3D graphics is not available'. Even I have updated my kernel to 22.214.171.124-91.fc14.i686. As far as I know, QM57 do support a 3D graphics, what should I do to drive it to work.
I have been waiting on installing ubuntu on my mid 2010 MBP 15' for a while now. I was wondering if the dynamic GPU switching was supported yet. Does Ubuntu recognize the intel card and can I use it over the nVidia card?
I installed F11, before today, I used Ubuntu for a long time. my graphic card is nvs140m of nvidia. I download the card driver from [URL]. the vision of the driver is NVIDIA-Linux-x86-185.18.29-pkg1.run. before I can install the driver, I must close the X-server. so, please tell me how to close the X-server.
I am very new to Linux and need to install a driver for my wireless card. I am trying to install the RT3070 v126.96.36.199 driver from Ralink. I am running Fedora 188.8.131.52-167.fc11.i686.PAE. I have read the thread in the Solutions section about this driver, but unfortunately this is somewhat above my levels of comprehension, and I don't really know where to start.
Here is the output. [chips@fedora wireless_utility]$ tar xvf RT3070_Linux_STA_v184.108.40.206.tar.bz2 tar: Record size = 8 blocks 2008_1225_RT3070_Linux_STA_v220.127.116.11/common/ 2008_1225_RT3070_Linux_STA_v18.104.22.168/common/2870_rtmp_init.c 2008_1225_RT3070_Linux_STA_v22.214.171.124/common/action.c 2008_1225_RT3070_Linux_STA_v126.96.36.199/common/ba_action.c 2008_1225_RT3070_Linux_STA_v188.8.131.52/common/cmm_data.c 2008_1225_RT3070_Linux_STA_v184.108.40.206/common/cmm_data_2870.c 2008_1225_RT3070_Linux_STA_v220.127.116.11/common/cmm_info.c ..... cp: cannot stat `/home/chips/wireless_utility/2008_1225_RT3070_Linux_STA_v18.104.22.168/RT3070STA.dat': No such file or directory make: *** [install] Error 1 make: Leaving directory `/home/chips/wireless_utility/2008_1225_RT3070_Linux_STA_v22.214.171.124/os/linux' make: *** [install] Error 2 [root@fedora 2008_1225_RT3070_Linux_STA_v126.96.36.199]#