Debian :: Networking Script Being Deprecated?

Aug 27, 2011

I find network-manager inconsistent most of the times and hence use the /etc/init.d/networking script to bring the interfaces up. But for sometime now I have been getting these sort of messages :- $ sudo /etc/init.d/networking restart Running /etc/init.d/networking restart is deprecated because it may not enable again some interfaces ... (warning). Reconfiguring network interfaces...done. If its being deprecated, then who or what is going to be taking over those functions?

View 3 Replies


Debian Configuration :: Kernel Panic: Power/level Is Deprecated?

Jul 13, 2011

I am currently having issues with system freeze when unmounting portable hard drives. This happens almost every single time. Normal USB sticks are fine and do not produce the freeze. I am using kernel 3.0.0-rc6, however the issue also persists when switching back to 2.6.39. This is the error message i get when freeze occurs, reverting to terminal output:

WARNING! power/level is deprecated use power/control instead
Jul 13 18:26:49 destiny kernel: [ 6196.892776] Call Trace:
Jul 13 18:26:49 destiny kernel: [ 6196.892803] [<ffffffffa008feec>] ? scsi_setup_blk_pc_cmnd+0x15/0x104 [scsi_mod]


View 2 Replies View Related

Networking :: Error: Code: Using Intrapositioned Negation Deprecated In Favor Of Extrapositioned

Nov 25, 2009

I'm using them to make a simple firewall on the girlfriends computer that is directly connected to the Internet. I wish to block everything except for a SSH port for me to admin with, and normal use things like a web browser. I grabbed an old template for the config and modified as needed. I'm getting an error that I'm not sure what is causing it. it is saying all incoming packets on any device is accepted. Or since there are explicit rules for eth0, that lines just means for any other device, which in her case there are none, so ends up meaning nothing?


View 2 Replies View Related

Ubuntu :: Sun's Java Deprecated / Why Is So?

May 10, 2010

Worked around the problems with OpenJDK causing slowness/crashes/CPU-hogging on my system by installing Sun JDK.

Why is Sun's Java deprecated? OpenJDK's buggier than an ant farm in my experience, and every time a Java applet starts in my browser, CPU immediately goes to 100%, and doesn't stop, even when I close the tab that the applet was running in. Only way to stop the CPU from getting hogged is to kill Firefox and restart it.

That or switch to Sun Java instead of OpenJDK.

View 1 Replies View Related

General :: Cp Reply Option Is Deprecated Try Using I Or F Instead

Jan 5, 2010

my command is the following:cp -LRuvp --reply=yes /mnt/filename /mnt/usbdrive/filename 2>/mnt/usbdrive/ error.log.i get "the reply option is deprecated try using i or f instead" the problem with the above is the only thing i get in my error log is: "the reply option is deprecated try using i or f instead" and if i use "i , f , /cp , etc..." nothing is generated in my log..what i want to do is copy file from source with "LRuvp" to destination and appened out put to "error.log"

View 14 Replies View Related

Fedora :: WARNING: Deprecated Config File - On Boot

Jan 5, 2010

I see these boot.log warning and understand that the directory where these config files are kept has (or is) changing. Okay, but is the correct procedure to just move them over from the /etc/modprobe.conf dir to the /etc/modprobe.d file? I am wondering if some changes to those config files or those that they are related to must be also made? A portion of the boot.log is below.


View 14 Replies View Related

Fedora :: WARNING: Deprecated Config File - While Booting

Mar 1, 2010

i got this warning message while booting

WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/.
WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/.

View 4 Replies View Related

Slackware :: Error Message When Tried To Run Clive - Md5 Module Deprecated

Mar 5, 2011

Having not used Clive in over a year I went over to [URL]... and downloaded, built, and installed both Clive and URLgrabber. Here is error message when I tried to run Clive,


View 10 Replies View Related

Software :: Exaile ( Error - Object Register Function Deprecated

Aug 18, 2010

I have been trying to install this nice looking piece of software for the last 3/4 days, my lastest error is..

** Message: pygobject_register_sinkfunc is deprecated (GtkWindow)
** Message: pygobject_register_sinkfunc is deprecated (GtkInvisible)
** Message: pygobject_register_sinkfunc is deprecated (GtkObject)
INFO : Loading Exaile
INFO : Loading settings...
** Message: pygobject_register_sinkfunc is deprecated (GstObject)
Traceback (most recent call last): .....

I have installed:

View 8 Replies View Related

Programming :: Warning: Deprecated Conversion From String Constant To Char*

Jul 3, 2010

I've just updated my linux system (Debian) and went to compile some code I'm working on. However it causes some problems, presumable because of GCC up dates. I get many of my subject line errors for example

../../common/Version_Control.cpp: In function int VersionControl():
../../common/Version_Control.cpp:55: warning: deprecated conversion from string constant to char*

So I check up the error and it comes from my error handler code which is a function

extern void SetError(char *string,int error_number)

The net tells me all I need to do is convert char *string to const char *string, however when I do so and recompile I get the following error

Error_Control.cpp: In function �void SetError(const char*, int)�:
Error_Control.cpp:41: error: invalid conversion from �const char*� to �char*�
make: *** [Error_Control.o] Error 1

I think I've done exactly what's recommended ?

View 3 Replies View Related

Programming :: G++ Warning - Deprecated Conversion From String Constant To 'char*'

Jan 10, 2011

My problem is that the warning keeps apperaing when I run g++ compilation.

Say, I have a system runtime function with header (imaginary)sysruntime.h: void printfunction(char *line);

Then in my .cpp file, I will include the above header #include <sysruntime.h>

Then, I do the below:
Line12: char *linetoprint = "Print this line";
Line13: printfunction(linetoprint);

But, I will get the warning message "Line12: deprecated conversion from string constant to 'char*'". (Even though it compiles)

My question is how should I declare my char* so that I wont get this warning message, and can still run printfunction(char* line) correctly?

View 7 Replies View Related

General :: Conky's Config / Error Border_margin Is Deprecated, Please Use Window.border_inner_margin Instead?

Jan 6, 2010

I'm using Conky in my Ubuntu 9.10 Karmic. I have an error message like this:


Conky: border_margin is deprecated, please use window.border_inner_margin instead
Conky: one or more $endif's are missing
Conky: desktop window (1a00065) is subwindow of root window (10d)
Conky: window type - override

View 3 Replies View Related

Software :: Using Checkinstall To Make Eboard: Deprecated Conversion From String Constant To Char*

May 16, 2011

I am trying, using checkinstall to make eboard to enable use of this program with a DGT electronic chessboard (option not available in the program included in the repositories) according to the instructions given here. After the preliminaries, namely downloading and extracting the source from: [URL]-1.1.1.tar.bz2./configure runs fine but (after su-ing to root), both make install & checkinstall fail after numerous warnings about "deprecated conversion" like:

Code: warning: deprecated conversion from string constant to 'char*' warning: deprecated conversion from string constant to 'char*' In function 'gboolean board_expose_event(GtkWidget*, GdkEventExpose*, void*)': warning: deprecated conversion from string constant to 'char*' warning: deprecated conversion from string constant to 'char*'

View 4 Replies View Related

Fedora :: WARNING: "deprecated Modprobe Warnings Followed By Boot Has Failed"

Feb 27, 2010

this started to happen recently after a reboot due to updates. The screen displays many, meaning more than 12 of: WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/ which is then followed by: Boot has failed, sleeping forever.

I deleted /etc/modprobe.conf, so that is not the problem. The normal boot process will display the modprobe warning twice and all is well. If the warning is displayed more than twice, the boot will fail and I have to try again.

View 1 Replies View Related

Fedora :: Boot Warnings: "Deprecated Config File"

Oct 12, 2009

I keep getting this warning when booting Fedora 11: WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/.

View 4 Replies View Related

Security :: Deprecated Pam_stack Module Called From Service "su-l"

Nov 17, 2010

I get the following message in /var/log/secure: Nov 15 09:27:21 su: Deprecated pam_stack module called from service "su-l"

I have done some research and it seems I need to get rid of in /etc/pam.d/su but I can't find out what to use in its place.

Below is a copy of my /etc/pam.d/su file:


From what I understand, I need to replace the line "auth required service=system-auth" with "auth include system-auth"

My problem is how do I then go about limiting access to su based on group membership without

View 2 Replies View Related

Ubuntu :: Error While Hash Checking Of Torrent - The Sha Module Is Deprecated - Use The Hashlib Module Instead From Sha Import Sha

Jun 8, 2010


nits@nits-desktop:/mnt/Storage/Tors/Incomp$ btdownloadcurses --check_hashes 1 filename.torrent
/usr/lib/python2.6/dist-packages/BitTorrent/ DeprecationWarning: the sha module is deprecated; use the hashlib module instead from sha import sha

These errors occurred during execution:

[09:37:48] IOError - [Errno 5] Input/output error

Got this error when I tried hash checking, was downloading the file using rtorrent when there was a sudden powercut and my system shutdown abruptly, tried restarting the torrent and kept encountering problems while restarting.

View 2 Replies View Related

OpenSUSE Install :: Cannot Compile Vdrift-2009-06-15 - Warning: The Options Class Is Deprecated; Use The Variables Class Instead

Mar 12, 2010

I have a problem with compiling vdrift-2009-06-15 using scons. As the source that i obtained only supports scons i cannot use make. the error that i get when i try to compile it in GNOME Terminal is: scons: Reading SConscript files ... scons: warning: The Options class is deprecated; use the Variables class instead.
File "/home/mohit/Download/vdrift-2009-06-15/SConstruct", line 9, in <module>

scons: warning: The BoolOption() function is deprecated; use the BoolVariable() function instead.
File "/home/mohit/Download/vdrift-2009-06-15/SConstruct", line 13, in <module>
Checking for C++ header file asio.hpp... (cached) yes
Checking for C++ header file boost/bind.hpp... (cached) yes
Checking for C++ header file GL/gl.h... (cached) yes
Checking for C++ header file GL/glu.h... (cached) yes
Checking for C++ header file SDL/SDL.h... (cached) yes

View 4 Replies View Related

Software :: Warning: The Build_dir Keyword Has Been Deprecated; Use The Variant_dir Keyword Instead

Dec 5, 2010

im using


scons prefix=/usr qtdir=/opt/qt4

to configure and i get these compilation errors


scons prefix=/usr qtdir=/opt/qt4
scons: Reading SConscript files ...
Platform: Linux i686

scons: warning: The build_dir keyword has been deprecated; use the variant_dir keyword instead.

File "/mixxx-1.7.2/SConstruct", line 42, in <module>
WE ARE IN: /mixxx-1.7.2/linux_build
QT path: /opt/qt4
Loading qt4 tool...


ive been scratching my head at this one for days, i turned on the ubuntu virtual machine and checked what apt wanted to pull, and im suspecting that i need to find the source versions of several packages in regard to qt4 and libqt4 and various libqt4 extensions.

View 4 Replies View Related

Networking :: Debian Testing (Wheezy) Update REALLY Broke Networking

May 8, 2011

The update that broke things contained some 400 packages.The problem is NOT hardware related. There are 2 other linux installs on the laptop that work the way they should.This is all related to using a wired network connection.The update removed the package network-config and did not replace it. Not sure that is the problem because that package is related to the gui and I can not get an ip in cli.

I am stuck at cli because the new kernel broke nvidia (pretty normal). There was also a new xserver, which tends to break nvidia, and as I recall a new kde. Anyway I am unable to rebuild the nvidia driver because I can not establish a network connection to my network to get the packages needed to fix it.

View 11 Replies View Related

Debian :: Networking - Deb Box To Deb Box

Jul 23, 2010

Ok. I've got debian linux set up on two computers and W2k set up on two other computers.

With either debian computer I can view and access the files on the W2K computers with the "Places - Network" option of debian linux. (Amazing!).

Now I need to find out how to see one linux computer from the other.

View 4 Replies View Related

Debian :: How To Enable Networking On Mac 7.1

May 13, 2010

How do I enable networking in Debian? I just installed Debian on my iMac 7.1 (which works perfectly well with ubuntu - but I'd like to get away from ubuntu because it seems to be targeting teenagers now which is only going to get worse). I used the latest daily build of the netinstall CD and had the network configured with DHCP, but now I find I have to enter my root password (login password will not do) to activate the network.

Of course, coming from ubuntu I disabled root login during install. I have to say, so far my impression of Debian isn't so good. For starters, to be able to boot at all I had to look for my refit CD which I hadn't used in ages because I don't need it in ubuntu. Also scrolling is wonky, like with the realtime kernel in ubuntu. How do I enable root login, or more to the point, how do I get by in Debian without enabling root login? I am not a systematic person at all, and one day I'm bound to forget that I'm root when I go online.

View 1 Replies View Related

Networking :: Debian 5 - How To Make A VPN

Jun 11, 2011

I don't know anything about setting up a VPN since I'm new to this. I don't know if there are any programs required to achieve this but here are the details, please mention the steps and configuration I need to do for making a VPN through my VPS :

-> Host machine Debian 5 32-bit

-> Remote machine Windows XP.

Setting up Remote won't really be a problem but the host should be ready for it.

View 7 Replies View Related

Networking :: How To Config 2nd NIC In Debian

Mar 8, 2011

I have installed Debian6 on Vbox , i have 2 nic on VM and i configured one of them during installation , but how can i configur 2nd nic ?

View 4 Replies View Related

Networking :: Installing IMQ On Debian?

Jul 12, 2010

I'm needing to make use of the IMQ devices but I keep getting errors when inserting iptable records and/or trying to configure/use the imq device.

It appears that IMQ is not enabled in my debian installation and after several hours of searching for a reasonable guide of installation I'm more confused than before.

I'm currently running on Debian 2.6.26-2-686.

I've tried following the instructions in this guide: [URL]

But this involves recompiling the kernel and I've got even less idea about that.

EDIT: I've proceeded further attempting to build a kernel using the link listed above; however I keep encountering many varied errors which I can't quite make sense of.

I've downloaded linux-source-2.6.26 and extracted it; I've attempted to patch the source with linux- and this reported 1 out of 6 hunks failed. Then when trying to make a kernel config using xconfig it keeps reporting that qt3 is not found but I've installed the pkg-config as it was asking for.

View 1 Replies View Related

Networking :: NAS Permissions In Debian - How To Set

Mar 24, 2011

I have a Promise Technologies SmartStor NS4300N Network Attached Storage device. I have a brand new install with blank disks setup. I have mounted these network drives onto my local machine using the "mount" command. I have logged into the NAS using the same username and password that I am running from on my Debian Desktop machine.

When I attempt to copy data to the locally mounted NAS Directories, I am seeing permission errors. The directories that I am copying appear in the new file list, but they are read only. I receive an error message telling me that I do not have permissions to write to the directory that I just created. I went to the command line and using "sudo" attempted to change the ownership and permissions, but I received more error message indicating that I don't have permission to do this either.

I am able to copy files directly into the mounted directory, and I and open them, modify them, and delete them. I can even delete the new directory that I cannot seem to story anything in. Shouldn't the files I copy onto my subdirectory of the NAS (which uses the same username and password as the machine the directory is mounted onto) be available to me with full permissions? How can I correct the problem.

View 11 Replies View Related

Networking :: Setting Dns Name For Debian Box?

Feb 11, 2010

I've set a dns name for my debian box and apparently the configuration is OK since when i type:

cmpgdev:~# hostname -f

i get exactly what i need. when i ping my dns name and/or ip address locally, the machine answers. when i ping my ip address from a distant machine, the machine answers but when i ping my dns name, no answer ..

View 4 Replies View Related

Debian :: Connman Does Not See Networking Interfaces

Jun 24, 2011

I'm using Debian Squeeze with backports turned on and I've installed connman and it cannot see my wireless networking interface. I know my wireless card has a working driver because I have WICD on the same system and it connects just fine.I am using the Enlightenment desktop though and it only integrates with the connman wireless manager - so I would prefer to use this instead of WICD. Anyone have any ideas on how I can get connman working? What extra configuration needs to be done after installing?

I added my user to have the same permissions as root to the /etc/dbus-1/system.d/connman.conf file and I added my tiwlan0 to /etc/network/interfaces as a DHCP connection with no changes in functionality :-/. Been searching around online and reading man pages for the last couple days with no good results. Any input would be awesome!

View 5 Replies View Related

Debian Installation :: VMWare NAT No Networking

Feb 21, 2015

I am attempting to install Debian via the netinstall as a VMWare workstation Guest. I cannot get the Network portion to work. I am using NAT and assigning a static IP address. This works on all my Windows Virtual Machines and I have gotten it to work to Install Fedora as well as CentOS. Here is the information from other installs.

IP: 192.168.28.XX
Subnet Mask:

If I use this information during installation of Debian it does not work. It always gives an error that it cannot connect to the download repositories. I am wanting to setup a machine to use in product for Git/SVN & Redmine and want to evaluate Debian vs CentOS vs Fedora for this purpose.

View 1 Replies View Related

Debian Multimedia :: No Networking After KDE Install

Jun 17, 2011

I will explain what I did.

1.Install debian amd64 stable (expert install mode with static ip address) without a desktop
2. Updated to testing
3. Installed nvidia drivers
3. Installed kde-desktop

Before I installed KDE I had networking - was able to update and install programs from terminal. Then I install KDE and then I cannot access internet or contact mirrors via cli for updating or installing.

View 8 Replies View Related

Copyrights 2005-15, All rights reserved