Debian :: Multiple Proxy Configuration For Apt?
Dec 29, 2010Is there a way to configure apt to use different proxies for different repository servers?
View 1 Replies
ADVERTISEMENT
Debian :: Proxy Server Multiple IPs?
Oct 1, 2015I am want to host a lot of SOCK5 proxies and would like to know what's the best software/Linux build that could suit for hosting proxies for a while sub net on once instance. So I want roughly 256 ipv4's on one machine, what's the best way of doing this? I have looked into Dante but would like to know if there is there any better software multiple proxies?
View 2 Replies View RelatedDebian Configuration :: Auto Start Proxy On Boot
Aug 13, 2015I have a debian 8.1.1 server running owncloud and a proxy server at home. I have everything working fine, with one exception. The proxy server won't start on boot. If I ssh into the server, then run "sockd -D" as root, it starts up and runs just fine. Any guides I find refer to the init.d script method that worked in Wheezy, but that isn't working. I think it has to do with Jessie switching to systemd? I had used someone elses script in init.d, and ran update-rc.d, but it still doesn't start.
With Jessie, how can I make "sockd -D" execute on system startup?
Debian Configuration :: Dnscrypt-proxy-1.6 Server Don't Work
Dec 23, 2015I can not to start dnscrypt-proxy-1.6 like server.
I use the man: [URL]
The man work for dnscrypt-proxy-1.2. It was work good. On latest version the man don't work.
I want that my DNS server is work well work.
uname -a
Code: Select allLinux raspberrypi 4.1.13-v7+ #826 SMP PREEMPT Fri Nov 13 20:19:03 GMT 2015 armv7l GNU/Linux
cat /etc/dnsmasq.conf
Code: Select alldns-forward-max=500
bogus-priv
resolv-file=/etc/resolv-dnsmasq.conf
no-resolv
listen-address=192.168.1.5
bind-interfaces
cache-size=600
[code]....
My system is Reaspbian (Like debian but for Raspberry pi 2).
Debian Configuration :: E2guardian - Proxy Connection Adjustment
Mar 4, 2016I cannot seem to get e2guardian to work. I went into Ice Weasel to adjust the proxy connections but that just blocks off all internet activity. The problem seems to be with the configuration settings in the browser. I tried Privoxy with a completely new Debian install and have the same problem.
View 0 Replies View RelatedDebian Configuration :: Redirecting Traffic Through SOCKS Proxy?
Aug 11, 2010I would like to redirect traffic coming from a machine A through a SOCKS proxy (setted on machine B)Machine B run "ssh -D 4242". So that create a SOCKS proxy on machine B.Machine A would like to connect on the internet, but the only way is to use machine B SOCKS proxy. The problem is machine A don't know how to use SOCKS Proxy. (Actually, i can just set ip, netmask and gateway on machine A).So, I would like to set up something on machine B that will redirect all traffic coming from machine A throught the SOCKS proxy.
View 1 Replies View RelatedDebian Configuration :: Anti-spam Proxy For Mail On Server?
Jun 20, 2010I was wondering if there was some kind of anti-spam proxy available for debian, that could serve as a layer between my ISP's mailserver and my email client. Something light, as it needs to be installed to a guruplug server with not much storage available. It would be great if I don't need to configure a fully fledged mail server but if it can function on it's own, only filtering spam messages. I already found assp and qpsmtp, but I find these very difficult to setup and assp is like huge.
View 1 Replies View RelatedDebian Configuration :: Squid Transparent Proxy Https 443 Port?
Apr 26, 2011I'm trying to get https/443 traffic go through squid.
View 3 Replies View RelatedDebian Configuration :: Apache Reverse Proxy - No Support For Common Database
Apr 14, 2010I installed apache2 and mysql database on a Debian system. It is using reverse proxy on apache to redirect requests to apache2 running on any machine which is on Xen server as a Virtual host. I tried to install Drupal on it. Every thing went fine till I pointed my browser to:
http://IP[/url] of LAN where Drupal was installed/drupal
then I see an installation page of Drupal which welcomes me. I click install in English then it can not proceed to connect with database. Database configuration: Your web server does not appear to support any common database types. Check with your hosting provider to see if they offer any databases that Drupal supports.
I have created a database and username for Drupal separately. What should I check to. There is one more error
http://Public IP/some location/
Is showing me contents of Document Root but there is a folder named drupal on it. When I click on it I get error. Not Found. The requested URL /drupal/ was not found on this server. Apache/2.2.9 (Debian) PHP/5.2.6-1+lenny8 with Suhosin-Patch proxy_html/3.0.0 Server at
What things should I check in for? I am also getting errors like:
- Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName on individual DomU's what should I check in. and on Dom0 when restarting apache2 I get following error.
- Reloading web server config: apache2apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName
[Wed Apr 14 15:23:05 2010] [warn] NameVirtualHost *:80 has no VirtualHosts
Debian Configuration :: Configure Multiple NIC's?
Jan 26, 2011I have a Debian server that had only one onboard NIC (1000 Gbps) but now I've added two PCI Intel Pro 1000 NIC's into the system to bump up the total # of NIC's to three. My question now is can I specifically assign or force Debian which interface to configure as ethx? I would always like my onboard NIC to be 'eth0' and the two additional NIC's to be 'eth1' and 'eth2'. For some reason Debian loads the modules at random and sometimes what was my
View 2 Replies View RelatedDebian Configuration :: KVM / One Interface / Multiple IP Addresses
Dec 27, 2015I'm renting a server which comes with 5 IP addresses, but only one network device. From what I can understand I'm able to create aliases by adding entries to /etc/networks/interfaces, I haven't tried I'm in the planning stages. Hypothetically, 192.168.22.30 is my primary IP and I want to set eth0:1 to have 192.168.22.31, and then after that I want to create a virtual machine (using kvm/qemu) that is able to communicate bidirectionally to the internet over eth0:1, and leave eth0 strictly for administrating (not for VM traffic).
The qemu guides I'm finding seem to assume that I want to use TAP or VDE, what I want to use is a sub-ip/alias. One guide I saw had me eliminate everything from eth0 and put it under br0. That would leave me unable to ssh into my server (and unable to administrate). Is there a way I can do something along the lines of: qemu [options] -net [option] -netdev=eth0:1 ?
Debian Configuration :: DHCP For Multiple VLANs
Feb 7, 2016I'm trying to setup a DHCP server that serves several different VLANs, we have 5 in total. Our network is working correctly, with static IPs, we're able to ping across without any issues.
When I connect my debian box to an interface on VLAN5, statically assign an address in the correct range, it works. Similarly with all other VLANs.
To configure this box as a DHCP, I set one of the ports on the switch as trunk, connect that to the debian box to allow all VLAN traffic to reach my debian box.
I setup DHCP following the steps on [URL] ....
Then I configured different VLANs by following the steps on [URL] .....
However, with the vlans setup, I am unable to ping anything. This is essentially what I did.
Code: Select allSet the port on the switch to trunk with 802.1 encapsulation
disable eth0
vconfig add eth0 5 # to add vlan 5
ifconfig eth0.5 192.168.5.254 netmask 255.255.255.0 up
vconfig add eth0 5 # to add vlan 10
ifconfig eth0.5 192.168.10.254 netmask 255.255.255.0 up
[Code] ....
I do not know why I am unable to get any connectivity through my VLAN interfaces.
Debian Configuration :: Kernel Using Multiple Featuresets?
Aug 15, 2010I was wondering if/how it would be possible to compile a kernel package where two featuresets are applied. I notice that xen-vserver seems to have been done and wanted to make a xen-openvz kernel if possible to use VZ containers in a Xen DomU. I've tried reading the metadata files in the debian/ dir of the kernel source but there seems to be a lot "going on" and I couldn't make much sense of it...
View 1 Replies View RelatedDebian Configuration :: Wireless LAN With Multiple SSIDs
Jun 12, 2011I have a laptop running Debian Squeeze that has one wifi nic - wlan0. The ethernet nic eth0 is faulty.I have configured /etc/network/interfaces to enable wlan0 to access my home wireless LAN. The SSID for this connection is wlan1 and the security used is WPA2.A second SSID configured for the wireless LAN is wlan2 and the security used on this second SSID is WPA.Is it possible to configure wifi networking on this laptop to be able to connect to this wifi network using either SSID - wlan1 or wlan2 - via the laptop's sole network interface, wlan0?
View 12 Replies View RelatedDebian Configuration :: Using Spamc With Multiple Files?
Jul 27, 2011I have several mails which I want to scan by using spamc and thats the problem.
It works when I use just one mail message as a parameter of spamc. E.g. spamc -c < 17383. BUT when I want to pass several messages on spamc e.g. spamc -c < 17383. 18974.(spamc scan just the first message) OR when I use a whole directory e.g. spamc < ./test/* it doesnt work. (output: -bash: ./test/*: ambiguous redirect)
how to pass multiple files in command line on spamc? I know - I can create a script, but I would be glad if it worked for testing in CLI (command above).
Debian Configuration :: Correct Way To Start Multiple Instances Of MPD?
Mar 18, 2010The first thing that comes to my mind is to add (copy) the script in /etc/init.d and the /etc/rc* directories by hand. Debian's automatic handling of init scripts on package install/removal is quite nice, so I tend to shy away from making any manual changes if there's an automated way to do it. Which leads me to the question: is there an official way to run a second instance of a daemon? (Tried google, didn't find much more than a bug report).
View 4 Replies View RelatedDebian Configuration :: Multiple Network Interfaces With VirtualBox?
Mar 29, 2010I have a rather urgent problem with my network, I got two virtual network interfaces one internal and one external. The problem is; I can't get connection to internet. The external NIC is set as a NAT and the internal is... internal.
/etc/network/interfaces
auto eth1
iface eth1 inet static
address 192.168.1.200
netmask 255.255.255.0
Running with this configuration makes my internet connect go away, however if I remove the configuration for eth1 everything is working fine.
Debian Configuration :: Preventing Multiple Instances Of User?
Sep 6, 2010Currently, a user is able to log into multiple terminals simultaneously, creating a copy of their roaming profile on each, and potentially causing problems if the instances are logged out in the wrong order. Is there any way to prevent this, so that if a user has logged in on a machine and not logged out (and perhaps some timeout has not yet expired) then their login attempts on another machine will be rejected.
View 2 Replies View RelatedDebian Configuration :: Wireless Networking For Multiple Users?
Dec 4, 2010I have 2 users on my HPmini 210 netbook running Squeeze. I just found out that it does not connect to existing wireless networks when I login as the second user. Is it supposed to happen by default or am I supposed to do something to make that happen? Another problem is that when I tried to create "new connections" again for the second user, the keys won't work. The same keys are working for the first user. The network keys are WEP 64 bit HEX.
View 2 Replies View RelatedDebian Configuration :: CUPS And Multiple Printer IP Numbers?
May 29, 2011Our Canon MX340 printer is WiFi connected using an IP address. This works well except that whenever the printer is turned off (for any reason) it chooses another IP next time it is turned on. As near as I can tell, it has two IP numbers: 192.168.1.64 and 192.168.1.65 Is it possible to enter both in the CUPS configuration so that CUPS will find the printer whichever number it is using?
View 1 Replies View RelatedDebian Configuration :: Jessie Nvidia-settings Multiple Monitors
Aug 30, 2015I've always used Debian with a single monitor and no need of proprietary drivers, because I usually don't do graphics or multimedia. Now I'm asked to set-up a machine with 3 nvidia video cards (770) and 4 monitors and everything went south. I started with just 2 monitors connected to 2 different video cards, not wanting to push my luck.
I installed a fresh Jessie and followed the instruction to install the nvidia drivers and tools from the Wiki. Everything went smooth. After reboot I executed (as root) nvidia-settings and I configured the two monitors to be one to the right to the other, with BaseMosaic option (at this point just one monitor was active) I saved the configuration to /etc/X11/xorg.conf , I even executed nvidia-xconfig as suggested, I rebooted and nothing happened, only one monitor was working, while the other -- looking again in the nvidia settings -- was still disabled.
I then tried with xinerama option and things are even worse, since now both monitors are black. I can login in one textual shell, but then I don't know what to do, since in my 10+ years of linux ... I never had to mess with X server. Is there a way to at least recover a working X without reinstalling everything?
Debian Configuration :: Multiple Gateways / Firewalls Pointed To One Interface?
Apr 4, 2016I am having some troubles using iptable rules on two Servers that act as Gateways pointed to one backend server with only one interface.
To be more exact, i have 3 Servers, 2 of those have a public and a private interface, with different public ips but common private interface ( they connect to the same switch ), the last one only has 1 private interface and is connected to that same switch.
Those 2 servers also act as a gateway and a firewall for the private network.
My problem is that i cannot seem able to route traffic from both of those to the third one and back to the same public ip that the request came from ( effectivly using two gateways on the machine with only one interface ).
As a testing scenario i am using ferm for applying iptable rules that forward ssh traffic ( for example ) to the backend server, and it works well when i do it with one gateway.
When i apply something like this in /etc/network/interfaces on the backend server though:
Code: Select allauto eth0:0 eth0:1
# The primary network interface
allow-hotplug eth0
iface eth0:1 inet static
  address  192.168.9X.XXX
  netmask  255.255.255.0
  broadcast 192.168.9X.255
  network  192.168.9X.0
[Code] ....
Even though forcing selection of an interface from the backend server ( like curl --interface ) seems to work well, meaning that the request to the curl appear to happen from the correct public ip, i can still only use one of the public ips to access the server with the ferm rules. Ideally i should be able to ssh to the backend server from both public ips using their ferm rules for forwarding traffic to the backend server.
I feel like i am missing some details on routing that should happen on the firewalls as the backend server seems to be able to use both gateways to access the internet and receive replies from it.
Debian Configuration :: Multiple Virtual Servers Be Setup In 2 Desktops?
Jun 12, 2010I now have 2 desktops running debian. I have virtual servers running in desktop 1, and I am hosting my photos using Gallery2. I have copied Gallery2 and the mysql over to desktop 2. I have entered port forward to desktop 1 using port 80 (using my router), and desktop 2 using port 1000. I can only access Gallery2 in desktop1. If I tried to access Gallery2 in desktop 2, I got re-directed to desktop1.
Questions:
1. Are home routers capable of port forward to more than one computers in a home network behind the firewall of the router? It is Belkin N+ router.
2. Can multiple virtual servers be setup in 2 desktops?
Debian Configuration :: Custom Multiple - Boot Troubleshooting-System?
Aug 16, 2010I want to build a custom system and I need your opinions. I have an old laptop which I want to configure as a system for troubleshooting purpose, my idea is to have multi-boot system with multiple root file systems, e.g. one root file system has only BIND to work as DNS server, another root file system has only Samba, etc., and I can choose which system to boot into from grub, or a custom menu after booting grub.
I thought of setting multiple partitions and install a full system on each one, but I thought that there might be a better way to do this, I'd like to hear your opinions.
Debian Configuration :: Samba: Sharing A Folder With Multiple Groups?
Aug 30, 2010I have a folder, called Vault, that we want to share only with certain people. Because it will contain confidential information.
I want the unix group trustees to have read-only access I want the unix group administrators (and root) to have read/write access
All other users should have no access.
the implementation I have so far is:
folder owner: root:administrators
folder permissions: 770
section from smb.conf
[Code]....
However, this is not working as expected. It currently works as follows:
Normal user: No access (expected) Trustees member: No access (fail. Trustees should be able to read) Administrators member: Read/write access (expected)
Debian Configuration :: Setup Multiple Mac Address Over Single Ethernet Interface?
Jul 23, 2015I want to configure multiple virtual ethernet interfaces over a single physical ethernet interface (eth0) and for each virtual interface the MAC address must be unique and the IP address must be Static.Finally all the virtual interfaces must be able to communicate both internally and externally and the traffic should be captured using wireshark.
I need to have such kind of setup to communicate devices individually using one physical ethernet device.
Because I was fiddling with few kernel modules like MACVLAN and MACVTAP and successfully enabled those modules and rebuild kernel. Using macvlan and macvtap I can configure virtual interfaces with unique mac address and static IPs but while capturing packets using wireshark interfaces behave weirdly.
For example say on HOST machine I have 1 physical interface and created 3 virtual interfaces as shown below.
Interfaces :
eth0 (physical ethernet interface)
IP: 192.168.A.A
MAC: aa:aa:aa:aa:aa:aa
[Code] ....
First from above interfaces I started pinging eth0 internally from host machine in which it worked as usually.
Second I did same externally from other machine which is connected to the same network of Host machine, and this did work as usually.
Third I pinged first virtual interface veth0 both internally and externally and this also works and after that I did check source and destination MAC address using wireshark tool-where both showed up there respective MAC address.
Now triggers the issue, where I pinged second virtual interface same like I did for first one, but this time ping was success and where as in wireshark tool the MAC address for veth0 is picked by veth1. This is where I got stuck and this issue happened for all the remaining virtual interfaces.
I couldn't see any virtual interface showing their respective MAC address, as of the remaining except the first virtual interface has been picking the first veth0 mac address.
Debian Configuration :: Multiple Partition Setups Other Than Resistance To Data Loss In Crashes?
Feb 25, 2010What are the advantages of the multiple partition setups other than resistance to data loss in crashes? Is there any other reason to have a special partition just for your boot directory (kernel files and config) than surviving a major crash?
Also, is it possible to make the Debian installer accept an existing set of partitions? Or even alter the size of the automatically created partitions? Does expert mode let you control the partitions? How many other very detailed things would I have to know to use expert mode, though?
Debian Configuration :: Install A Multi-core System And Configure It To Run Several VMs, One Each For A Firewall, A Caching Proxy Server, A Mail Server, A Web Server?
Jan 25, 2011I will be relocating to a permanent residence sometime in the next year or two. I've recently begun thinking about the best way to implement a home-based network. It occurred to me that the most elegant solution might be the use of VM technology to eliminate as much hardware and wiring as possible.My thinking is this: Install a multi-core system and configure it to run several VMs, one each for a firewall, a caching proxy server, a mail server, a web server. Additionally, I would like to run 2-4 VMs as remote (RDP)workstations, using diskless workstations to boot the VMs over powerline ethernet.The latest powerline technology (available later this year) will allow multiple devices on a residential circuit operating at near gigabit speed, just like legacy wired networks.
In theory, the above would allow me to consolidate everything but the disklessworkstations on a single server and eliminate all wired (and wireless) connections except the broadband connection to the Internet and the cabling to the nearest power outlets. It appears technically possible, but I'm not sure about the various virtual connections among VMs. In theory, each VM should be able to communicate with the other as if it was on the same network via the server data bus, but what about setting up firewall zones? Any internal I/O bandwidth bottlenecks? Any other potential "gotchas", caveats, issues? (Other than the obvious requirement of having enough CPU and RAM).Any thoughts or observations welcome, especially if they are from real world experience in a VM environment. BTW--in case you're wondering why I'm posting here, it's because I run Debian on all my workstations/servers (running VirtualBox as a VM for Windows XP on one workstation).
Ubuntu :: Automatic Proxy Configuration URL And Synaptic?
Mar 12, 2010I am unable to download packages from synaptic. I am at a school that uses an automatic configuration url with a proxy.pac file. How can I get synaptic to work with this proxy?
View 5 Replies View RelatedUbuntu :: Reverse Proxy Setup - Pass Multiple Domains Thruough One Server To Various Hosts On Local Network
Apr 13, 2011I'm trying to pass multiple dpmains thru one ubuntu server to various hosts on my local network.
[url] should be sent to the /var/www folder on the local host.
[url] should be forwarded to an IIS box on my local network (owa.nunya.local)
[url] should be sent to another ubunto box on my local network (smtp.biznet.net)
I have tried placing VirtualHost entries in /etc/apache2/sites-available/default and [url]and [url] both work but [url] gets forwarded to the c:inetpub folder on the IIS box.