Debian Multimedia :: X Server Bailing - Fatal Module Fbcon Not Found

Jan 31, 2010

Boot up with 2.6.32 kernel. Get to login screen, X attempts to start and fails. I log in, execute startx and succeed. Yesterday, could not boot up at all with .30 kernel. Upgraded to .32, so partially fixed. Yesterday also un-installed Synaptics package, as do not have touch-pad on this machine (Thinkpad X40)

This from kdm.log:
X.Org X Server 1.7.4
Release Date: 2010-01-08
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-trunk-686 i686 Debian .....

View 3 Replies


ADVERTISEMENT

Debian :: FATAL: Module Fbcon Not Found

May 17, 2011

I'm trying to create an xorg.conf file. I've used Xorg :1 -configure and Xorg -configure in the console but i keep on getting the same error message.

FATAL: Module fbcon not found. Number of created screens does not match the number of detected devices. Configuration failed.

View 7 Replies View Related

Fedora :: Fatal Module Microcode Not Found

Dec 14, 2009

On startup I get the following message:
Code:
Applying Intel CPU microcode update: FATAL: Module microcode not found. OK
ERROR: Module microcode does not exist in /proc/modules
Selfmade Kernel:

Code:
[toby@sarah ~]$ cd /usr/src/kernels/linux
[toby@sarah linux]$ cat .config | grep -i microcode
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
# CONFIG_MICROCODE_AMD is not set
CONFIG_MICROCODE_OLD_INTERFACE=y

Code:
[toby@sarah linux]$ rpm -qa | grep -i microcode
microcode_ctl-1.17-1.53.fc12.1.x86_64
I found few links, saying that this is a Xen problem but I have no Xen.

View 3 Replies View Related

Ubuntu :: FATAL: Module Fuse Not Found.

Mar 5, 2010

I installed FUSE using fuse-2.7.4.tar.gz; but now, when I type 'modprobe fuse' in a terminal, it gives me: FATAL: Module fuse not found.

View 4 Replies View Related

Hardware :: FATAL: Module Snd_card_intel8x0 Not Found

Jan 15, 2010

modprobe snd-card-intel8x0

And this give me result as

FATAL: Module snd_card_intel8x0 not found.

View 2 Replies View Related

Hardware :: Fatal - Module Pciehp Not Found

Aug 14, 2010

This is the error I am getting:
bert@mybook:~$ modprobe pciehp
WARNING: /etc/modprobe.d/options.conf line 3: ignoring bad line starting with 'ProblemType:'
WARNING: /etc/modprobe.d/options.conf line 4: ignoring bad line starting with 'Architecture:'
WARNING: /etc/modprobe.d/options.conf line 5: ignoring bad line starting with 'DistroRelease:'
WARNING: /etc/modprobe.d/options.conf line 6: ignoring bad line starting with 'Package:'
WARNING: /etc/modprobe.d/options.conf line 7: ignoring bad line starting with 'ProcCmdLine:'
WARNING: /etc/modprobe.d/options.conf line 8: ignoring bad line starting with 'ProcEnviron:'
WARNING: /etc/modprobe.d/options.conf line 9: ignoring bad line starting with 'SHELL=/bin/bash'
WARNING: /etc/modprobe.d/options.conf line 10: ignoring bad line starting with 'LANG=it_IT.UTF-8'
WARNING: /etc/modprobe.d/options.conf line 11: ignoring bad line starting with 'ProcVersionSignature:'
WARNING: /etc/modprobe.d/options.conf line 12: ignoring bad line starting with 'SourcePackage:'
FATAL: Module pciehp not found.
bert@mybook:~$

I am trying to make my card reader hot pluggable
this lspci
bert@mybook:~$ lspci
00:00.0 Host bridge: Intel Corporation N10 Family DMI Bridge
00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics Controller
00:02.1 Display controller: Intel Corporation N10 Family Integrated Graphics Controller
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02) .....
I am running ubuntu netbook remix on an acer aspire 532h.

View 1 Replies View Related

General :: FATAL Module Nvidia Not Found

Aug 13, 2010

I made some progress trying to get a host that has an Nvidia GeForce 6150 LE and running a liveCD version of Xubuntu 9.10... but "modprobe -i nvidia" returns "FATAL: Module nvidia not found."

View 5 Replies View Related

Software :: FATAL Module Ndiswrapper Not Found

Mar 2, 2010

Ok, I just upgraded from Slackware 13.0 to Slackware-current and now when I run modprobe ndiswrapper I get the following error.FATAL: Module ndiswrapper not found.Im not sure what happened on this. I did a search in google and couldn't find anything useful any help would be appreciated.

View 14 Replies View Related

Fedora :: Fatal - Module Ndiswrapper Not Found (Need USBcore)

Nov 8, 2009

I'm trying to configure ndiswrapper but when I run
Code:
modprobe ndiswrapper
it says

Code:
FATAL: Module ndiswrapper not found.
I know it needs usbcore so I run

Code:
modinfo usbcore
modinfo: could not find module usbcore
So How should I get usbcore working?

View 6 Replies View Related

Ubuntu :: Installing - FATAL: Module Powernow_k7 Not Found

May 15, 2010

I want to activate cpu frequency scaling on my home computer. I have an athlon 64 3200+. I know that it supports frequency scaling, because when I got the processor I also got a CD with the Cool n'Quiet driver. I've tried with the powernowd service, but when I try to start it I get Code: * Starting powernowd... * CPU frequency scaling not supported...

and if I try to start cpufreqd I get Code: No cpufreq interface found, not starting cpufreqd In the meanwhile I've noticed that I also don't have powernow-k7 kernel module installed. If I try a modprobe powernow-k7 I get: Code: FATAL: Module powernow_k7 not found I have no ideea where I can get this kernel module.

View 1 Replies View Related

Red Hat / Fedora :: Adding Ntfs Module - FATAL: Module Ntfs Is Not Found

Jun 8, 2011

I am using Redhat linux 5 version 2.6.18-164.e15 with platform i686. I need to add ntfs module. I execute following command

#modprobe ntfs

but it say FATAL: Module ntfs is not found.

View 1 Replies View Related

OpenSUSE Install :: Fatal - MBcache And Ahci Module Not Found

Nov 30, 2009

I am using openSuSE 11.2 on a VGN-AR41L. I have also erased the preinstalled Home Vista (what a pleasure). Now to my problem. My system boots correctly but if I press the <ESC> key while booting I can see the following messages:

"Doing fast boot
FATAL: mbcache module not found
FATAL: ahci module not found
"
and the boot process continues normally.

Why this happens? Does this mean that I have a problem that I haven't discovered yet? Is it something that I can ignore? I am using SUSE Linux from version SUSE Linux 8 personal and although I am not a power user I have done my two desertions on this system and I am very happy with SUSE. I have bought SUSE Linux 8 Personal and SUSE Linux 10 all the other versions until today have been downloaded.

View 6 Replies View Related

OpenSUSE Install :: VMtoolsd Fatal - Module Vmmemctl Not Found?

Feb 8, 2011

vmtoolsd FATAL: Module vmmemctl not found.
What does this mean and should I activate/deactivate anything in the system or is this no problem.

View 8 Replies View Related

Ubuntu Multimedia :: Fatal Server Error No Screens Found 9.10

Jan 9, 2010

I've installed 9.10 on a work station with success. I've got an nvidia quadro fx 3000 and its supported under nvidia legacy driver apparently. So I've tried to install the driver with no success. Xorg.0.log reports a fatal server error no screens found. I get a flashing console login when I boot with "nvidia" device driver in xorg.conf, it boots fine with "nv". No matter what I try I cant get it to boot with nvidia drivers. Also, on a side note, after initially installing nvidia driver thru hardware in gnome, I no longer have a grub loader option to select recovery or anything else. Upon boot it displays "grub" briefly then continues to boot to gui. I've set the delay to 20 seconds with no results.

Resolved the issue of the display, now on to the grub menu.

View 3 Replies View Related

OpenSUSE Install :: Root Fs Mounts R/o After Update To 11.2 - FATAL: Module Jbd Not Found

Dec 13, 2009

I've updated my openSUSE 11.1 to 11.2 using installation DVD. After that, as system boots, I started to get lines like:

Code: FATAL: Module jbd not found
FATAL: Module mbcache not found
FATAL: Module ext3 not found and so on with different modules.. and this exact string several times:

Code: WARNING: All config file need .conf: /etc/modprobe.d/tv, it will be ignored in a future release. Finally I get:

[Code]....

View 4 Replies View Related

OpenSUSE Hardware :: ATI Catalyst 10.7 On 11.3 64bit - Starting Vmtoolsd FATAL : Module Vmmemctl Not Found

Jul 26, 2010

I downloaded the new Catalyst Package from ATI [URL] and I don't know what happened. Installed fine restarted. It starts loading fine then screen flickers like crazy Gnome Desktop won't load. Kicks me over to console type log in. Starting vmtoolsd FATAL : Module vmmemctl not found. gdm[1586]: WARNING: GdmDisplay : display lasted 2.12 seconds Gdm[1586]: WARNING: GdmLocalDisplayFactory: maxium number of X display failures reached: check x server log for errors. I type StartX and is states (ee) fglrx(0): iregl_setsuspendresumestate FAILED -9. Is it going to happen with every computer running 11.3?

View 9 Replies View Related

OpenSUSE Install :: Booting With Bootsplash Turned Off / Sending Error FATAL: Module Ata_piix Not Found?

Dec 20, 2009

while booting with bootsplash turned off there's a message "FATAL: Module ata_piix not found FATAL: Error running install command for ata_piix" .Though everything works fine i'd like to know what does this message mean and is there a way to disable loading of ata_piix whatever it means.

View 2 Replies View Related

Debian Multimedia :: Fatal Server Error:Server Is Already Active For Display 0

Nov 15, 2010

I have got xorg and gnome-core installed. When I put in command startx I get the following message: X: warning; process set to priority -1 instead of requested priority 0 Fatal server error:Server is already active for display 0 If this server is no longer running,remove /tmp/.X0-lock and start again. when I try to sudo Xorg -configure it shows me same message server is ..... lspci shows me the following information 04:02.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)So what I am doing wrong and how do I get this videocard working with Xorg.

View 7 Replies View Related

Ubuntu Multimedia :: Fatal Error: No Screens Found?

Feb 15, 2011

I just installed Maverick on a brand new system last Saturday. Everything worked, except dual monitors, so I activated the proprietary ATI/AMD driver. That allowed the dual monitors to work, except that it put a little "AMD unsupported hardware" watermark in the lower right-hand side of each screen. After a day or two, I decided to go back to the default driver while trying to figure out how to avoid the watermark.

I assumed that when I deactivated/removed the proprietary driver that it would automatically switch back to the default. Instead, my computer now boots to TTY1, and when I try to install xserver.xorg, etc., I get a lot of error messages,ike "No screens found" or "Screens found, but configuration is unusable," etc. The same messages show up in the logs.Can anyone help me get back to a useable desktop display? At this point, I don't care which one. erhaps the proprietary would be easiest since it seems to be holding my system hostage, but either one would work.

View 1 Replies View Related

Ubuntu :: Fatal Server Error: No Screens Found

Mar 22, 2011

Ubuntu 10.10 Whenever I try to boot up now I get a command line environment instead of the normal gnome desktop. The first error message that comes up is: "Screens found,but none have a usable configuration" further down: "Fatal server error: no screens found" Any way I can re-configure so it detects my monitor?

View 9 Replies View Related

Fedora :: Fatal Server Error: No Screens Found Giving Up?

Jul 9, 2010

I installed fedora 10 on my laptop. But I am getting this error when it is booting up:

Code:
Release Date : 5 November 2008
X Protocol Version 11 , Revision 0

[code]....

View 5 Replies View Related

Red Hat :: Fatal Server Error No Screens Found On RedHat 7.1 XFree86

Apr 4, 2009

there are several posts related to my problem but not quite what I want. I don't need any effects to be running nor do I need perfect resolution. I have a PCI-E card Nvidia 8600 gts and I need to run redhat 7.1 for reasons that are not debatable. I also have an onboard ati radeon X 1250 but currently I am running the PCI-E.The installation was successful and ran in GUI, however after installation and reboot, the screen keeps flickering trying to load the desktop.I just need to get the GUI running the same way the installer was able to run in GUI, I tried editing the XF86Config file to change the driver to either vesa or vga but still didn't work. Probing for devices is not an option since the card is not listed and the maximum video ram goes up to 64MB in xconfigurator. It probes my card as a VGA generic with 1 MB ram. I know there is a way to have the desktop load just the same as the installer's gui settings but that's where I need help.

this is after changing all the 'driver' values to vesa. I don't understand why it can't find the screen even though I used the horizontal and vert. sync values for my monitor. Any instructions or advice on how to just get the desktop loaded would be great, I know this is a very old OS but regardless I need for it to work.

View 10 Replies View Related

OpenSUSE Install :: 11.4 Upgrade - Fatal Server Error, No Screens Found?

Oct 27, 2010

I have just upgraded from 11.1 to 11.4. When I boot up, I get a command line, but when I do 'startx', I get 'Fatal server error: no screens found'. I have been looking for a solution and tried 'Xorg -configure' but this gives:

Code:
Failed to load /usr/lib/xorg/modules/drivers/vboxvideo_drv.so: undefined symbol: resVgaShared

[code]....

View 6 Replies View Related

Ubuntu :: Xorg Messed Up - Fatal Server Error (No Screens Found)

Apr 23, 2010

My issue began with my resolution changing to 800x600 in Karmic Koala and then my inability to change it back to anything else. In my haste to fix it before going to work this morning I loaded a new xorg.conf without backing up the old xorg.conf with data not relevant for my monitor and now I'm in limbo. The good news, I hope, is that I also run 8.04 on the same computer so I do have access to what I hope is proper xorg.conf / I've modified the existing xorg.conf file and I'm still getting the "low graphics mode" message (EE) problem parsing the config file and (EE) Error parsing the config file. Fatal Server Error: no screens found.

View 9 Replies View Related

General :: Fatal Server Error: No Screens Found Running Distro From Usb Drive?

Apr 3, 2010

I'm trying to run backtrack from a usb drive on my netbook. Upon loading it, i get "Fatal server error: no screens found".

View 1 Replies View Related

General :: Slackware 13.1 Won't Boot With Ubuntu Studio - Fatal Server Error: No Screens Found

Jan 1, 2011

I have this old box that I used at school that I wanted to re-purpose and use. So i decided to that I wanted to run xp, ubuntu studio and slackware so I can learn about linux and do some other things with xp. I think I got through the installatiosa all fine and dandy, and I installed grub for my boot loader, I can boot into studio and xp, but I cant get into slackware. the grub boot menu is sorta funky too, it shows a generic and recovery mode for studio which is fine, and then another option for xp, some memory test boot option, but then for slackware it shows "Slackware Linux (Slackware 13.1.0) (on /dev/sda4) four times in a row. If I select any of them they all end up with some error; the third SW [slackware] option down the list of the repeated 4 allows me to sign into root, but when I type "startx" i get :

(EE) intel(0): No kernel modesetting driver detected
(EE) Screen(s) found, but none have a usable configuration

Fatal server error: no screens found

but thats with a lot of other text above that. if you need any more details, please dont hesitate to request for them. I'm going to take some time and cool down. I'm trying to get these three OSes running from one HD. I've partitioned the 80 gig drive as follows

Primary 40 G NTSF for XP
Primary 2G Linux Swap
Primary 16G Slackware
Primary 18 U Studio
Primary

View 21 Replies View Related

Fedora Installation :: Upgraded To FC10 - Video - Fatal Server Error: No Screens Found Gotta Go, X Session Getting Corrupt

Jun 13, 2009

I must say, the RPMfusion version of the Nvdia driver package work better with FC10 than they did under FC9 for me, which is to say: they work at all. Still get corrupted output after a few hours of work, but I imagine that's just the underlying weakness of the Nvidia driver bubbling up. Either way, now I have other problems:

First off, the Intel driver for my onboard video setup has stopped working entirely. The attempt to bring up X on the Intel setup gets me to the KDE login screen and locks the machine up hard (poweroff required). A look at the xorg.0.log shows that the server seems to be stuck in a loop trying to determine the valid video properties for the session.

Here's my xorg.conf, BTW. I have it setup to perform different configurations depending on which DefaultServerLayout line gets uncommented (lines 4 - 6). If anybody has a better way of doing this, I'm all ears. While we're on my xorg.conf, pleas view lines 64-67 and/or 75-77. This is my quickie way of changing drivers (again, all ears) which brings us to the next problem, neither the nv or nouveau drivers work with my system. Interestingly enough, both drivers tend to fail in the same relative spot in the process, I think. Please refer to line 207 of this xorg.0.log with the nv driver or line 140 of this xorg.0.log from the nouveau setup. Either way, both sessions die with the same message: (EE) Screen(s) found, but none have a usable configuration. Fatal server error: no screens found Gotta go, x session getting corrupt,,,

View 7 Replies View Related

Debian Hardware :: Fbcon Switches Primary Fb Device

Mar 28, 2014

i'm using a fitpc2 in a network cabinet in my closet. I've got a lilliput 7" usb monitor plugged into it. for the most part it all works fine, however on some reboots fbcon gives the primary gfx card the fb device and the lilliput ceases to display the console. its really rather odd.. the udlfb module loads and displays some booting messages but right after it loads the stupid gma500 and reassigns the /dev/fb0 to it, so your just left with the last frame in the buffer i suppose on the lilliput

if i login blindly and startx, the display comes back to life, but while in X the display isn't updated for any of the ttys when switched to them via ctrl-alt-F1 etc.. and again, sometimes it works sometimes is doesn't..

i'm curious if there is a way to force fbcon to use the udlfb device as its primary and either ignore the gma500 on boot or set it to a secondary. i don't really want to get rid of the ability to use the onboard video, i'm just not going to unless the box is so far gone i need to use an actual monitor..

debian 7.4

View 3 Replies View Related

Debian Configuration :: Error: Module Ndiswrapper Not Found

May 23, 2010

I installed ndiswrapper and tried adding a driver. Error: module ndiswrapper not found.So I recompiled my kernel, upgrading to 2.6.33.4 (no, I can't see the logical connection either) After a week, I got the new kernel working ( in the interim I reinstalled debian- it didn't survive my first kernel attempt. don't ask), and reinstalled ndiswrapper. Same problem. So I had a stoke of genius: download the source package!! So I did. Lo and behold, a new directory appeared in /usr/src/ : modules. I took a moment to admire my work, then I jumped in.I 'ls'ed to see what was going on, and found a Makefile. so I typed 'make'. First error: kernel source not found. So I entered the Makefile, found the(clearly marked)variable,and changed it to /usr/src/linux-2.6.33.4 , exited, and redid 'make' Second error: no wireless support in kernel. So I went to src/linux-2.6.33.4 and did a make menuconfig- loaded my current, threw in wireless, and exited.

[Code]...

View 1 Replies View Related

Debian Hardware :: Cannot Startx - Module Nvidia Not Found

Jul 31, 2015

After upgrading from Debian Wheezy to Jessie, I figured out I needed to install the nvidia drivers in order to play some Steam games. Went to Debian wiki, installed drivers from there, rebooted, stuck in command line. I can't remember what errors did it give though. After a couple days of searching on the internet the problems and trying different things like purging everything nvidia and reinstalling the drivers in different ways and still no success I thought : Perhaps I installed the wrong nvidia drivers?

Did some research, found out that I might have an Optimus system ( from what I read, I have one because I am in possession of 2 graphic cards, an intel and an nvidia one . Installed Bumblebee, everything worked fine until I rebooted and once again, I couldn't move out of the command line. Tried to startx, error no screens found. Opened log, nothing wrong until it gets to the part of loading the nvidia module, which fails and tells me such module does not exist.

Looked into the module folder, there is no nvidia there. I'm also running a dual-boot Dell Inspiron N5110, with Windows 8.1, which I am currently on and Debian Jessie with GNOME.

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved