Debian Multimedia :: Lenny's Suspend And Hibernate Stopped Working?
Oct 13, 2010
after i installed latest ATI proprietary drivers ( 9.3 legacy drivers) for my HP compaq nc6000 with a "Mobility Radeon 9600" the standby and the suspension stopped working, i mean, if i try to suspend or hibernate my laptop, it closes X (this is fine) but after it gets freezed on the whole screen black with just a blinking underscore and nothing more, neither an error message after reboot.All i can do is to force shutdown by pressing poweron button for 5 secs.I'm running on a lenny, stable with stable repo.What can i do to understand where does this problem comes from and maybe fix it?
How do I enable suspend in Lenny currently I can shut down or hibernate. In ubuntu on a different computer I can suspend which resumes very quickly can this work on Lenny also it does not hibernate properly anyway, there are error messages.
There should be the suspend and hibernate buttons in th System Menu, but there is only two options, Shut down and Log off.Also, in the Power Manager Preferences window, it has no option for suspend and hibernate.
I have a server with Debian Wheezy. I already setup Wake-On-LAN (from halt) and works just fine, but i need to have Wake-On-LAN from suspend or hibernate. None of them works, despite multiple solutions I tried.
The server is mainly used for remote backups and i will like to be able to suspend/wake on LAN automatically on certain period of time (when backups occur) or manually.
The first try was based on [URL] .... and [URL] ..... but without success.
I also tried: uswsusp and hibernate .. intended on using even TuxOnIce but looks complicate..
In BIOS there are some settings to manage the fans (Fan Speed Control Modes) which is set to 3 (Workstation). I also disabled all USB devices in BIOS (since i don't need them and i have read that some USB may create problems)
I used pm-utils and once i try suspend/hibernate the machine hangs with the fans still running ... and with some other hardware suspended.
Some info:
# acpitool -e Code: Select all Kernel version : 3.2.0-4-686-pae20110623 - ACPI version : 20110623 ----------------------------------------------------------- Battery status : <not available> AC adapter : <info not available or off-line> Fan : <not available>
I'm using a lenovo t530 laptop with debian testing. my suspend button combination (fn / f4) suddenly stopped working, from recent updates? How to get a terminal readout from what's happening when i push these buttons.
Just got Ubuntu 9.10 and I'm liking it a lot, but my computer refuses to go into hibernate or suspend. I have a Dell M1530 but I don't really think it's a dell hardware issue because it's not just when I close the screen, it's also when I click suspend or hibernate from the menu.
When I try either one I just get the lock screen where I have to enter my password to return to my session, but the computer never suspends or hibernates.
I have a headless 10.04 ubuntu server ( running at home. Because I am a student I want to save some power by suspending the server when I really don't need it (school, sleep etc.). I have gotten WOL to work for me, BUT the suspend does not work.
I have tried pm-suspend and s2ram, but they both have same result; I lose all control (seems like a freeze) from my SSH, but it does not disconnect, and the server responds to pings. But I cant connect via ssh, or use the fileserver or any of the roles it has. I assume there might be something locking it when it tries to suspend, but I really don't know where to start looking (logs and stuff). I have googled quite a bit, but almost all failed suspends are some funky laptop issues, and this is not...
I am using OpenSUSE with Reaper+SampleTank+wineasio+jack. I experienced that if I go on suspend or hibernate, I cannot come back in a working state for these applications and jack seems to be stuck. What is the solution?
I have Debian 6 (squeeze), I have also seen this under Ubuntu (can not remember how I fixed it).
I can hibernate, but when I switch on the system cold boots (it does not restore previous session).
Note suspend works fine. Have looked in /var/log/pm-suspend.log Shows for each suspend suspend block a resume suspend block, but hibernate hibernate' is not followed by resume hibernate` ( I assume that this is not correct. )
Update on what I have discovered: I have discovered that the uswsusp package is missing from debian squeeze. I could get it from testing or unstable repository, but have to be careful about not pulling in other dependencies. I would like to know if it will fix it. Is uswsusp needed for hibernate. Or should pm-utils be enough. (suspend it ram is working fine.)
I am having some pain with my new Squeeze installation, I am not sure if I am asking to much of it or it is an easy fix.
Firstly my system is laptop which I regularly plug a second monitor into. The video adaptor is an ATI HD4550 mobile.
My problem is that when ever suspend or hibernate my system, and even sometime when I boot up the screen(s) are just blank, although sometime they don't, it always happens if I suspend by closing the lid of my laptop, and only sometime happend with through Gnome is go ->System->Shutdown->Suspend. This is really annoying.
Another issue which I think is connected is that as I said I have a second monitor (most of the time) and when I boot up then it works until I log in, then a message pops up say the configuration can not be applied and it revert to Mirror mode or it does this thing where it places the second screen inside (virtually) the built in Laptop panel, it will not let me fix this through the monitors dialog just displaying the same message. I can fix this by doing
invoke-rc.d gmd3 restart
This gets as far as killing Gnome them it prints an error the to console, at which point Imopen a new terminal by ctrl+alt+f2 and invoke-rc.d gmd3 stop invoke-rc.d gmd3 start
then it works fine and even remember that I set the secondary screen to be the primary monitor through xrandr.
I tried install fgrlx drivers instead but it didn't really fix the issue, so I removed them.
I installed the debian 6 on the tninkpad T42, use the Suspend,it can entry the suspend state，I type the key let it come back, it can exit the suspend state, But the screen always display "black",can't come back the X window.
Installed Debian 8.2 a while back, and I've been having issues with getting the machine to suspend correctly. If I try to put it to sleep when logged in to my regular user account the screen just goes black and then the computer hangs. However if I put it to sleep as root everything works fine. I do this by running this command (as root):
Code: Select allsystemctl suspend
What can I do about this? Worked fine on Debian wheezy..
Btw, just found this in the dmesg log. Connected perhaps..?
Code: Select all[ 6.863018] ACPI Warning: SystemIO range 0x00000000000018e0-0x00000000000018ff conflicts with OpRegion 0x00000000000018e0-0x00000000000018ef (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-258) [ 6.863028] ACPI:
If an ACPI driver is available for this device, you should use it instead of the native driver
I've been running 6.0.2 amd64 stable since release day and recently have noticed my suspend and hibernate do not work. Normally I have transmission running and have set it to not enter sleep mode while torrents are active. However today I have not had transmission and was wanting to see if the sleep mode options would kick in. So I have set my display to "sleep when inactive for" 5 mins (this works perfect) I have set "put computer to sleep when inactive for" 10 mins (this does not work at all)
When I try to manually test suspend my display flashes black for a few seconds but remains backlit, then asks me to log back in When I manually go into hibernate mode my display turns off, pops back on for a second and in a terminal says something about a usb device (something failed but it happens so fast I cannot read it)
I recently installed 10.04 and everything Just Worked.Before Lucid, I was using 9.04 and had successfully gotten my Broadcom 4306 working perfectly... which is why I think the Lucid install went so perfectly.Well, after a botched hiberation (Dell Inspiron 9100), my wireless is dead in the water.I've tried "ifdown", "iwconfig", "/etc/init.d/network restart" and "force-reload", 'modprobe -r b43'
I've tried editing .xinitrc to contain ck-launch-session and dbus-launch to no avail. Console kit is installed. I'm using Sid without a login manager, and xfce's suspend and hibernate work fine on my Wheezy computer. Xfce4-session and consolekit are installed. Is this a problem with permissions?
I have installed the latest virtualbox 4.1 on my desktop and laptop. It hosed suspend and hibernate.
The laptop is A Dell D630 with Intel Core2 Duo CPU, the desktop is an AMD based ASUS M3N78-VM mobo with Athlon II x2 250 CPU. Debian Testing 32-bit (same results with the 2.6.39 and the 3.0 kernels). Both have nvidia cards though - the desktop an integrated 8200, the laptop a NVS 135M. But suspend/hibernate was working before with the 4.0 series virtualbox.
The workaround is to clear the vboxpci vboxnetadp vboxnetflt vboxdrv modules from the memory before suspend/hibernate. I added the
service vboxdrv stop rmmod vboxpci vboxnetadp vboxnetflt vboxdrv
lines to my sleep script (i dont use power managers, just the acpi powerbutton/lid scripts modified). Everything is ok now.
I was on my server most the night via SSH doing changes (mostly permissions :/ ) and woke up this morning and get "Server unexpectedly closed network connection" from inside the network (via internal IP), AND outside the network (via outside IP)Obviously I messed something up somewhere right?
Any thoughts on what to verify or check first? Server is up, because I can access a few different hosted pages. I'm remote today, so I don't have access to the box. I'm assuming i'm SOL until I get to the box tonight to fix locally..
I've configured my debian lenny to load first the command line, then if i want I load the X server, but doing this to that way I don't have the suspend/hibernate functions from the gnome menu, so, my question is:
what is the command to suspend / hibernate my system at any moment I decide?
I installed debian etch on my system. Installation done successfully, but when it boots up the X server is not starting and showing error. Note : It is perfectly working with debian lenny. Configuration : Intel DG41RQ ,1GB Ram ,160GB HDD.
I have been running X applications over my ssh connection for a long time using the command ssh -Y servername.example.com -p 222 . About a week ago, I noticed that it no longer works. I also tried ssh -X servername.example.com -p 222 but again, no success.
I am running Squeeze on an older Compaq EVO laptop with radeon graphics.
A few months ago, after an upgrade, suspend and hibernate stopped working. The suspend or hibernate worked fine, but the resume just hung with a black screen. I finally got around to looking into it and found a workaround.
The workaround is to disable Kernel Mode Setting for the radeon. This can be done by adding the boot parameter "radeon.modeset=0" or by editing /etc/modprobe.d/radeon-kms.conf so that it includes the line "options radeon modeset=0".
If you are interested in the details, you can search for problem reports related to radeon kernel mode setting.
I did some mess with adobe flash player and now I have no soound on my Thinkpad T60.
root@debian:/etc/modprobe.d# dpkg -l|grep alsa ii alsa-base 1.0.25+3~deb7u1 all ALSA driver configuration files ii alsa-utils 1.0.25-4 i386 Utilities for configuring and using ALSA ii bluez-alsa:i386 4.99-2 i386 Bluetooth ALSA support ii libsox-fmt-alsa 14.4.0-3 i386 SoX alsa format I/O library ii libwine-alsa:i386 1.4.1-4 i386 Windows API implementation - ALSA sound module
Anybody know how to get pictures off of one? I've got a computer with XP, but the software doesn't want to work. I've tried setting it up in a VM, but VirtualBox won't patch the camera through for some reason. The SD card adapter it came with stopped working, so that's a no-go.
Debian 5 64 bitGnome, using compiz-fusion.Compiz had been working well ever since I installed it last year; a couple of days back there was a debian update (I think and x-server update was there); now compiz does not work anymore. if I select compiz as the window manager from the cmpiz-fusion icon, I cannot move/resize wndows, the titlebar disappears.
There seems to be something that has changed in the newest stable Debian - I chose kde4 as my default desktop at installation, and it worked fine. Then I went and changed some options in both /var/run/kdm/kdmrc and /etc/kde4/kdm/kdmrc, something I have done many times before without problems.
However, when I tried to restart kdm with /etc/init.d/kdm, things didn't come up - no X, no kdm. When I rebooted the machine everything seemed fine, so I thought the problem was solved; but this morning I wanted to change something else - I don't want kdm to remember the last user, and I don't want to see a list of users either. Now dkm and X fail even when I reboot; I also find that /var/run/kdm/kdmrc has disappeared - I am certain I didn't remove it.
The strange thing, when I try /etc/init.d/kdm, I can kdm hanging around all alone in the process list, but no X or greeter. So what is going on - what should I have done instead? And can I repair it? I can of course reinstall the system, but I hate to think that we can't manage better in Linux.
