I'm trying to set up a dual monitor system with my Dell E7450 laptop with Debian Stretch and KDE 4.14.2. The graphic card is a Intel HD5500 with xserver-xorg-video-intel version 2:2.99.917-2. The first time I simply connected the HDMI plug, it recognized the monitor and it automagically set up the extended dual monitor. Then I unplugged the HDMI and KDE froze. Now every time I plug in the second monitor the laptop monitor goes black, the desktop goes on the external monitor and the mouse cursor moves only vertically along the leftmost edge of the monitor.
Just got a pretty fresh install of Debian/XFCE. Both monitors work out of the box on my 8400GS. I was unable to find an option to change it so I can span is as 1 work space instead of having them mirrored.
prior to showing the GNOME user logon screen. Unfortunately, all information I seem to be able to find on this appears to be relevant for pre-systemd Linux only.
The situation is that I have two monitors: One small tilted monitor on the left with 1024 x 768 which should be secondary and one larger landscape monitor on the right with 1920 x 1080 which should be secondary. Everything works persistently AFTER a user has logged on. However, after booting the system or after changing users, the small monitor becomes primary so (a) the user needs to logon using that monitor and (b) as the monitor is physically tilted, one needs to tilt the head to read it wihtout the xrandr commands.
If I can get beyond this issue, there is a second issue: While one can pick the primary and secondary monitor in Gnome, monitor numbers 1 and 2 seem to be fixed. This becomes a problem when using freeRDP to connect to a Windows server with dual monitors. Then, the smaller, secondary monitor is number 1 and thus, it is the Windows logon and primary screen. Is there a way to switch numbers 1 and 2 in Linux, for example somewhere in the grub configuration?
Just installed Debian 8, coming from Ubuntu12, it seems I cannot get my dual monitors to work as it should.
I want two monitors side by side, currently I have two identical outputs. I looked around a bit and register two possible problems.
root@bigcem101-debian:/home/bigcem101# xrandr xrandr: Failed to get size of gamma for output default Screen 0: minimum 640 x 400, current 1024 x 768, maximum 1024 x 768 default connected primary 1024x768+0+0 0mm x 0mm
Hence, problem 1: it is as if there is only one monitor detected. Then I tried to look for Xorg.conf ..... and: problem 2 xorg.conf is not there. This seems to be normal but when I installed my Ubuntu years ago it was still there and one could manually set things. There must be something new I am missing.
Card: VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV670 [Radeon HD 3690/3850]
It seems I have both ati and radeon installed.
root@bigcem101-debian:/home/bigcem101# X -configure (EE) Fatal server error: (EE) Server is already active for display 0
I just switched from Ubuntu to Debian and I am having trouble doing something that I found easy to do with Ubuntu. I have a Radeon R9 graphics card from MSI with dual DVI ports and I'm trying to get xrandr/arandr to detect my dual monitors but it only detects one. I've installed all the drivers and even installed the "amdgpu" driver from the Ubuntu repository but still not detecting. What drivers am I missing?
I have an external monitor attached trough a VGA cable to my laptop PC, with the monitor settings shown below. The problem is that when I have the external display connected, video players such as VLC or MPlayer display a black screen instead of the video, with only the sounds working. If I unplug the monitor everything works fine.
Setup Specs: Dist: Debian Wheezy Kernel: Linux 2.6.32-5-686 Gnome Version: 2.30.2 Laptop: Asus Eee PC 1000HE (10" LCD screen) External Monitor: LG Flatron Wide L204WT, 20'' Widescreen LCD Monitor
Pressing left, middle and right button of mouse at bottom and right edges or bottom left, top right and bottom right corners of the screen does not work with fittstool-2.0 on openbox in debian jessie with dual monitor.
Pressing left, middle and right button of mouse at top and left edges and top-left corner on the screen works correctly.
I use openbox on debian jessie. I do not install any desktop environment explicitly.
In the jessie, I installed gcc, make, libglib2.0-0, pkg-config, libcairo2-dev and libxcb1-dev.
I downloaded [URL] .... and confirmed that the sha1sum value of the downloaded file matches sha1sum value given at [URL] ....
I expanded the downloaded file by Code: Select alltar -xvf fittstool-2.0.tar.gz into fittstool-2.0 directory.
I executed with an ordinary (non-root) user: Code: Select allcd fittstool-2.0 make
I executed with root privilege on the fittstool-2.0 directory Code: Select allmake install
I executed the following with the ordinary user: Code: Select allfittstool and ~/.config/fittstool/fittstoolrc was generated.
I modified it as Code: Select all[TopLeft] LeftButton=gnome-terminal MiddleButton=pcmanfm RightButton=iceweasel
[Code] ....
gives: Screen 0: minimum 320 x 200, current 2560 x 1024, maximum 8192 x 8192
VGA1 connected 1280x1024+1280+0 (normal left inverted right x axis y axis) 408mm x 306mm 1600x1200 60.00 + 1280x1024 75.02* 60.02 1280x960 75.04 60.00 1152x864 75.00 1024x768 85.00 75.08 70.07 60.00 832x624 74.55 800x600 85.06 72.19 75.00 60.32 56.25 640x480 85.01 75.00 72.81 66.67 60.00 720x400 70.08
HDMI1 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 376mm x 301mm 1280x1024 60.02*+ 1280x960 60.00 1152x864 75.00 1024x768 75.08 70.07 60.00 800x600 72.19 75.00 60.32 640x480 75.00 72.81 60.00 720x400 70.08
DP1 disconnected (normal left inverted right x axis y axis)
I'm trying to get dual monitors working on a fresh install of debian from the netinst install cd. I did not allow the installer to download any packages and then manually installed xorg gnome-core & gdm using apt-get.
The monitors are plugged into the onboard vga and dvi ports of my motherboard. I believe the chipset is intel.
Is there any way to track packaging progress of Plasma 5 in Debian? I periodically check [URL] .... and [URL] .... debian.org for something related, but it doesn't give any idea how far Plasma 5 is from landing in Debian (unstable / testing). Is there some easy way to track this?
I have removed windows title bar using this method: [URL]....
I have removed panel shadow using this method: [URL].....
I want to remove the small white line that appear under the panel in the following image:
This line appeared after removing of panel shadow, it was there all the time hidden under the shadow. I can change line color from panel background svg file or even make it transparent. but i want to remove that line, how can i do that?
Installed kdeconnect from Stretch repo, and KDE Connect from F-Droid on my phone, but I don't know how to get this working. No KDE Connect options anywhere in System Settings (I also search there for "connect" and don't find anything related to KDE Connect). There's no GUI anywhere, no Plasma 5 widgets, nothing. Only "kdeconnect-cli", which when I enter "kdeconnect-cli -l" (list devices) I get
Code: Select allkdeconnect-cli(26749)/kdeconnect DevicesModel::refreshDeviceList: dbus interface not valid 0 devices found
On the phone side, "No devices" found when it searches, or when I press refresh. Why is there no System Settings option even after installing the kdeconnect package?
Got a problem with the plasma network management widget. Let's say I connect to a wireless network at my office called "Network A". I then go home and try connecting to my wireless network, "Network B". Assume each has WEP encryption. When I click on my home network, the wallet-manager pops up first. I enter my password. I then see that instead of adding a new network, it has "Network A" selected for editing. This happens every single time. What is going on here? I don't want a bunch of posts naming WICD either. I want to use the plasma widget because I like it. So what's up with it overwriting other network connections when you try adding a new one?
After installing the latest upgrades in Testing, KDE will no longer start. After logging in, the progress bar reaches about 80% and then stops. At this point the system is unresponsive, and I have to switch to another VT to reboot.
I just got my new video card: nvidia 9500 GT to setup dual monitors.
The video card has 2 dvi output to support dual monitors Monitor 1 is connect to dvi Monitor 2 is connect to dvi using a vga adaptor
I can't seem to get dual monitor to work?
From system settings -> monitor, i see 2 vid outputs one is DVI0, the other is VGA2. what's odd is i can set up different screen resolution for each monitor, but I only see one desktop, both monitors show the same desktop.
How do i get each monitor to show it's own desktop?
I noticed in the new Ubuntu 11.04 with Unity, when in dual monitor the icon of skype is not placed in the tray when "closed". It is only placed in the background, so that I have to kill the process and open a new one. To be sincere, I see a strange aspect of the entire tray when in dual monitor. Is anyone else noticing the same?
I have tried to setup a workstation with 3 monitors on two ati videocards, the goal being to span the desktop across all of them.
The process was not difficult at all, but after login X11 crashes and I am left with a console. I am fortunately able to login in safe mode, but I would like to ask for help in debugging this issue.
Here I will try to give as much detail as possible, starting with my system specifications:
Code:
The first card, the ATI Radeon HD 4650 is capable of running two monitors at the same time. The monitors, for all it matters, are three identical ACER P206HV 20" connected with their analog interface (due to missing cables which I will buy soon). Resolution 1600x900 each. My motherboard is an AsRock 870 Extreme3 mounting an AMD Athlon II X4 640 3 GHz processor and 8 GB of RAM.
When asked by Ubuntu, I installed the ATI Caralyst driver version 11.6 and set it up for using Xinerama.
As I said, this setup works fine if I login in safe mode, but crashes X11 otherwise (even in classical mode - no Unity). By inspecting the logs (attached) I found this (notice the segfault)
Code:
As a test, I tryed to configure Catalyst without Xinerama, an this works, but of course I end up with two separate desktop, which is not what I want. In this mode, xrandr seems to work correctly
Code:
After some research I found that XRandR does not support desktop spanning over multiple GPUs, so Xinerama is the only way to go in my case. Since the two are not compatible with each other, after login in safe mode I see that XRandR is disabled
Code:
One more test consisted in disabling the XRandR module in the config files, as found in some posts: edits in /etc/X11/xorg.conf
my system monitor plasma widgets for RAM and CPU suffer from overlapping textin the panel Kubuntu Lucid). I can't find an option to resize the widgets.
with KDE everything works fine (both monitor show their configured displays correctly), however oddly with gnome when i try and setup dual monitor display, i get blank screens on both monitors, however on the display 0 on the left side there is a full column single pixel width green strip. the rest of display 0 and 1 are blank, however my mouse will move around both display correctly.
I'm having a rather hard time getting my 3 monitors setup as one display. I can get all three to work without too much heartburn using 3 separate X instances. The monitors are on 2 different video cards, one dual heads. The other on it's own card.
I've tried countless ways to get this to work, and I'm just not feeling the love. There are 2 17 inch monitors on the 1 video card and then the second video card has a 24 inch monitor on it. I can get the two monitors on one head to work with twinview, but the third one is left out.
The physical configuration looks like this..
17inch on the left of the 24 inch monitor, and another 17 inch monitor on the right, with the 24 inch monitor being in the center.
I'm going to include my current xorg.conf and lspci.
xorg.conf
Code: harry@ubuntu:~$ cat /etc/X11/x xinit/ xkb/ xorg.conf xorg.conf.backup harry@ubuntu:~$ cat /etc/X11/xorg.conf # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 1.0 (buildd@palmer) Sun Feb 1 20:21:04 UTC 2009
How can i be able to enable dynamically my second monitor and use Unity at the same time?Summary system:HP Compaq 8710p laptop, Nvidia Quadra 320M, Natty 64bit, with attached 2nd 19" monitorDescription steps taken this far:By default ubuntu ships with the following xorg.conf conform the new minimalist trend:
I use the nvidia-current binary drivers. In this configuration:Unity works Xrandr sees 1 screen (so no configuration of second screen possible)Standard monitor configuration tool in Ubuntu shows 1 screen With [URL]
Code:
disper -d auto -e
my second monitor comes alive. My laptopscreen becomes dark (with moving mouse cursor). Unity / Ubuntu classic (no effects) go into scrambled mode. Mouse is moving, objects are
I have installed Ubuntu 9.10 on my laptop Lenovo T60. The problem is i can't make extended monitor in that way: laptop 1024x768 and Monitor LG L1952HQ 1280x1024. If i make this configuration, screens appear black and i can't go back without restarting. Presently system support only: laptop 1024x768 and LG L1952HQ 800x600. This configuration (laptop 1024x768 and LG L1952HQ 1280x1024) worked well previously with the same ubuntu 9.10 before reinstallation. I guess i should reinstall ore change to other video drivers? The refresh rate is set on 60 Hz.
When Karmic came along, I upgraded and it was possible for the first time to get a dual monitor display working using only the GUI apps supplied. (I think I used screen resolution) It worked out of the box and took no time whatsoever.
I had a dual monitor set up working with 2 1024 x 768 monitors, with a desktop spanning both, and a background picture doing the same.
The Lucid update has just spectacularly broken this, along with a large number of desktop type changes that were unwanted.
The version of Ubuntu was the usual vanilla, but with enough K stuff installed to make K3b work. The card is a Radeon 9250SE.
Give up and re-install Karmic? Wait for some sort of upgrade to allow either Monitors or Multiple Screens to work - the option to remove cloning is greyed out in one and unticking clone in the other does nothing? Try some other distro?
Does anyone know of a decision to remove any functionality from Lucid that existed in Karmic? Is there any useful background to this that is perhaps not obvious?
I recently got a signal conversion box so I could route my netbooks monitor-out port to my TV. The idea being that I could effectively set the TV up as a separate monitor for watching movies on whilst I worked using the netbooks own monitor. It seemed to work initially, the Monitors dialog box could easily detect and setup the TV as if it were just an external monitor however I can't seem to play any kind of video on either screen when this is set up. All I get in Totem, Mplayer, VLC and skype is just a black area within the applications window. The sound works fine so this is clearly just a video problem.
It only seems to occur when I configure the system to use the TV as a separate monitor. If I tell it to display the same thing on both monitors all video output works fine.
I have been encounter 2 bugs on 2 sides of the coin. Seems it doesn't fix since Wheezy till now.
1. When I don't install any nonfree firmware I'm stuck at 1024x768 resoultions unable to turn to 1366x768 2. But when I install nonfree firmware my 1366x768 was solved but I encounter other new bugs
>> On Jessie: XFCE4.10 doesn't save any wallpaper everytime when reboot the pc & always reset to default. But when remove nonfree firmware the bg save normally but I've to stuck at 1024x768 resulotion. This also happen on Wheezy as well. >> On Stretch: XFCE4.12 workspace become too long ugly. But when remove nonfree firmware the workspace become normal but I've to stuck at 1024x768 resulotion once again.
So any way with nonfree installed without this XFCE bugs or without nonfree driver install but make resolution 1366x768 work for not to stuck in 1024x768 resolutions. Overall I'm quite satisfy Stretch testing than Jessie Stable.
I've played around with a second monitor, but so far I haven't found a satisfying solution. I am using a laptop with a GeForce 9600M GS graphics card. I have managed to set up twinview, but my monitors don't have the same height so I'd rather have something like the "seperate x screen" option. Or how I imagine that option would be like. After some problems with the nvidia configuration tool (I couldn't change the xorg.conf, until I read this: [URL] I now have two separate screens, but the second one is all empty, with black background and X-shaped mouse cursor.
There seems to be no window manager running, I can start programs there with -display :0.1 , but they don't get any frame decoration and, which is worse, no keyboard focus. I'd be fine with a fullscreen konsole there, so I don't really need a window manager, but I do need access from the keyboard. I'd prefer a setup that would allow me to easily (without editing xorg.conf) switch between using both monitors and using only one, because I don't always use the laptop at home.
I am running a 2.7Gh with 2G ram with an ATI X1300/1550 Radeon Card and running with dual monitors. I had the monitors functioning in Linux Mint but it was an older driver version and it was slow. I was reading about the Ubuntu Maverick 32bit and fresh installed it I have just installed Ubuntu 10.10 Maverick 32bit. Everything that I have found on here concerning ATI and fglxr has not worked.