Debian Multimedia :: Compiling Intel Atom Poulsbo GMA 500

Jun 17, 2010

The intel <Xorg> driver provides 2D and 3D support for Intel integrated graphics chipsets, including the i810, 915{G,GM}, 945{G,GM,GME}, 946GZ, 965{G,GM,Q}, G33, Q33 and Q35; the <GMA 500> is not supported.

Packaged for Debian as xserver-xorg-video-intel. [url] [url] [url].

Poulsbo is the codename of Intel's second-generation ultra mobile PC chipset. Its GMA 500 graphics core is not supported by the intel Xorg driver; ITP xserver-xorg-video-psb filed as Debian bug #533450.

Poulsbo (chipset) - Wikipedia, the free encyclopedia - [url]

Poulsbo's graphics core GMA 500 is currently not well supported by Intel for the Linux platform.

However there is a quite easy way to have the drivers work on any Debian-based distribution, thanks to the Ubuntu sources and packages, for the linux kernel 2.6.30 (with newer kernel it would need a little hacking but seems still possible while the sources are included).

View 1 Replies


ADVERTISEMENT

Debian Hardware :: Intel Atom N450 - Limited CPU Frequency Range

Jul 29, 2010

Got a new HP Mini 210 the other day and things run pretty good using squeeze considering how new it is. The only serious problem is that the available scaling frequencies are mis-reported by the system. Instead of 800, 1.0, 1.3 and 1.6, only 1.0 and up are shown.

acpi-cpufreq is installed and run properly on boot, indeed the system scales nicely from 1.0 through max as needed / dicatated by the ondemand governor. Powertop tells me it spends 99.8% of its time at the "lowest" frequency of 1.0.

In the hopes that a newer kernel would solve things I downloaded 2.6.34-1 and built it, and though it runs very nicely it doesn't solve the problem of the missing 800Mhz frequency. At this point I'm at a bit of loss as to how to proceed. I've asked the same question on the Debian mailing list, because I want to give this the good old college try before submitting a bug report to the kernel mailing list.

View 2 Replies View Related

Debian Hardware :: Broadcom HD Video Decoder On Intel Atom D410PT ?

Mar 5, 2011

Can I put a broadcom crystal hd video decoder on intel atom d410pt board? I use this for occasional net surfing. It does that pretty well staying cool and silent all the time, but it's really incapable of playing any hd content. These days I came to know that broadcom crystal hd decoder can be used with intel pinetrail platforms to facilitate hd viewing.

View 2 Replies View Related

Ubuntu Multimedia :: Upgrade To An Acer Revo R3610 Dual Core Intel Atom 1?

Dec 14, 2010

I have a question that has been partially answered in other posts and forums but I am still unclear. Please can someone help me out? I was previously using an Intel Atom 1.6GHz, 1GB RAM and the onboard Intel graphics adaptor for use as a media center PC. This was running Lubuntu and I could use Flash at full screen without any issues.

I have since decided to upgrade to an Acer Revo R3610 (Dual core Intel Atom 1.6GHz, 4GB RAM, Corsair SSD and Nvidia ION grpahics). I thought that as this machine was more powerful than my previous one, I could get away with ditching Lununtu and go for Ubuntu 10.10 (x86).

I have updated the machine and installed the latest Nvidia drivers. When I browse to a Flash based site all runs fine until I go to full screen then I get about 10FPS (sound remains fine). The video is unwatchable. I rebuilt the machine using Windows 7 Ultimate (x86) and tested again. Under Windows the video plays perfectly.

I have also tried using the 10.2 beta version of Flash under Ubuntu and this gives the same terrible results. I am at a loss as to where the issue lies. Is it with Nvidia's driver, Adobe's Flash under Linux or is it my Ubuntu build?

View 9 Replies View Related

Hardware :: AMD E-350 Vs Intel Atom D525

Apr 3, 2011

I want to make a x86 based router using a mini-ITX board and I found 2 options, Asrock AMD-E350M1(~$140) and Intel Atom D525MW(~$94).

1. AMD-E350:

Pro:
It's slightly faster than atom D525.
It has AMD-V(virtualization support)
It can be used as HTPC(1080p)
It can be used for GPGPU
Uses ~max 25W for CPU+(capable)GPU

Con:
Single Channel Memory
PCI-e slot is bad for router( I found 4-port PCI NIC at $25. 2-port PCI-e cards are $60 and 4-port PCI-e cards are $150 )

2. Intel Atom D525:

Pro:
PCI slot(see above)
Dual Channel Memory
Cheaper than AMD E-350
Passive Cooling

Con:
Uses SODIMMs
It cannot be used as HTPC(doesn't play 1080p, not even 720p)
It cannot be used for GPGPU

I plan to use the mini-ITX board with 4GB RAM:
AMD E-350 with 4GB ram(1x$51)=$191 -> cpubenchmark.net score is 744. Regarding the CPU the value is 3.8952/$
Intel Atom D525 with 4GB(2x$29)=$152 -> cpubenchmark.net score is 714. Regarding the CPU the value is 4.6973/$

I would like to have a mini-ITX board that is capable of having one VM runing the router OS and 2nd VM runing pyrit on the GPU.

If it is possible to run pyrit on the APUs GPU I would choose AMD E-350 because I can put in PCI-e NIC to run the router OS. If not, I have to stick with Intel Atom D525, 4GB RAM would be a waste, but also I would waste a lot of CPU time.

View 10 Replies View Related

Debian Multimedia :: Output Video To Tv With A Low End Atom Cpu Box?

Jul 9, 2010

Im trying to be able to output video to my tv with a low end atom cpu box(link below) running debian lenny. I realize it wont likely be true HD video. I also realize I wont be getting surround sound. My tv is a little bit older so it doesnt have a monitor input or I would have tried that. It does have HDMI and component though and i have a DVI to hdmi adapter and audio cables that will work once I have a video out solution. It does have a PCIE expansion bay but the power supply is only like 150w so i dont know that Ill be able to use a regular video card. I had considered some sort of usb output but dont know if any of that will work on linux. Any suggestions? Im pretty novice with the whole computer on my tv area and dont have alot of money to build a whole new system or i would just do that.

[URL]

View 2 Replies View Related

Hardware :: Overclock Intel Atom N270 ?

Jan 25, 2010

Is it possible? Its an Acer Aspire One.

View 1 Replies View Related

Debian :: Compiling TAUCS For Squeeze Using Intel Studio C And Fortran Compilers

Feb 19, 2011

I want to build Taucs library [URL] , to use its sparse solver in some number crunching apps, [URL] Since i plan to build these apps with the intel development suite, i better build Taucs with the same set of compilers... but AFAIK Taucs doesnt exist in <testing> or <unstable> ( I could apt-get source, and set appropriate flags for compilers it it did ) and i do not quite understand its build system ..It is not a ./configure system...it relies on external libs like blas, lapack and metis... which regardless of existing in Debian repo are built with gcc-4.5... so.. no way of using this to link with an Intel built library...

View 10 Replies View Related

OpenSUSE Hardware :: Intel Atom N270 With ACPI On - 11.2

Jun 23, 2010

I'm using a purpose built computer with Intel Atom N270 CPU and running OpenSUSE 11.2 (Intel� 945GSE + ICH7-M chipset)

If I leave ACPI = Enabled in the BIOS Setup, then the Yast Hardware Profile shows 2 x N270 running at 800 MHz.

If I turn ACPI = Disabled in the BIOS Setup, then the Yast Hardware Profile shows 1 x N270 running at 1.60 GHz.

Anyone experienced this with their system? Intel Atom N270 is a single core, so why is it seen as a dual core with ACPI on? Based on the above, should I simply leave ACPI turned off?

View 1 Replies View Related

OpenSUSE Install :: Run On A Notebook With An Intel Atom Processor?

Jul 28, 2010

If opensuse will run on a notebook with an Intel atom processor?

View 5 Replies View Related

OpenSUSE Install :: OS 11.3 Freezes Randomly On Atom / Intel 945

Jul 30, 2010

I just upgraded my system from oS 11.2 to oS 11.3 on Thursday. I've chosen the network-CD and booted from an USB-pen-drive, as my netbook doesn't have a CD-drive.I new experience that my computer freezes obviously randomly. It's not just a programme crashing, but the whole computer just halts. Nothings working anymore - mouse is not moving, keyboard doesn't respond, I can't even switch to another tty.I tried to remember what I was doing right before the crashes. Once I used the new netbook-desktop of KDE and had typed for an application in that "cool" new desktop. The desktop wend "blank" (the application folders disappeared and I was waiting till the results were shown) and then the computer froze. Just right now I used Okular, selected some text and opened the context-menu when the computer died, the other time I closed the Yakuake with F12 and the computer didn't respond just right before the window was minimized at the top and last but not least I had that "Expose"-like window arrangement opened and clicked at the black background when everything hang up.

What could be the reason for it? oS 11.2 worked perfectly - I hadn't had any crash during 5 months of intense use. I suspected the new graphics driver, but I can't find any reported bug about the Intel 945 GMA* or anything about the new KDE 4.4.4 on atom processors.

View 9 Replies View Related

Ubuntu Installation :: 32-bit Or 64-bit On An Intel D510 Atom System?

Sep 14, 2010

Hi! What would be more preferable to install on my machine? I've read somewhere that if my CPU supports 64-bit, I should prefer that over 32-bit. What are the distinct advantages if I do?

View 9 Replies View Related

CentOS 5 :: Run Xen On Intel Atom Or Celeron For Learning Purposes

Jan 7, 2010

is it possible to run xen on intel atom or celeron for learning purposes, as when i start the virt-manager it doesn't give me the new option the file menu and when i try to do xm create domain1 it gives error like try running it with config file

if atom/celeorn can't run xen why does it gets installed on the system.

View 2 Replies View Related

Fedora Hardware :: Intel Atom D510 - 12 - No Ethernet - No Mouse ?

Feb 11, 2010

I've got a new motherboard Intel Atom D510. There are two problems in Fedora 12 after installing (and in live, too)

1) there is no ethernet (no net, red "x" in net tray).

2) there is no PS|mouse. (only usb-mouse works!).

View 1 Replies View Related

Ubuntu Servers :: Intel Atom D525 As A PBX Or An Email Server ?

May 16, 2011

I've got a hankering to upgrade my home PBX from Trixbox on CentOS to SipXecs on Ubuntu 10.04 LTS.

The current Trixbox setup is running on a Gigabyte G33M-S2 with 2.2 GHz Intel Core 2 duo (There ain't no kill, like overkill). My needs are... ahem... modest, to say the least. The user base is currently five (5) people (all family members)... and would never grow beyond 10.

So, the Intel Atom D525 looks like I could cut down on power consumption. I'm thinking of going with the Gigabyte version found here [url]

If it works out well, I'm thinking of moving my email server (currently on Qmail, and showing its age) to a D525 board, and switching to Postfix.

Has anyone had any thoughts, experiences (good or bad), and/or "gotchas" with the Atom boards as a server (no gui).

View 5 Replies View Related

OpenSUSE Hardware :: Force Intel Atom N280 To Work On Powersave Mode?

Jul 22, 2010

How can I force my Intel Atom N280 to work on powersave mode?

View 1 Replies View Related

Ubuntu Multimedia :: Poulsbo Driver Installation On 9.10?

Nov 30, 2010

The Poulsbo support page here: [URL] suggests that Poulsbo support is broken in 10.10 but 'Excellent' in 9.10. When I installed the driver in 10.10 it installed OK, and works OK except for video playback. When I then tried to install it on 9.10 using the same procedure, it downloaded the drivers but then did not automatically build/install/configure them, and there was no change to the video behaviour. I presume it simply didn't execute the relevant scripts etc after downloading the packages. What might have gone wrong ? What else can I try ? The terminal command I used in both cases was similar to this:

sudo add-apt-repository ppa:gma500/ppa && sudo apt-get update && sudo apt-get install poulsbo-driver-2d poulsbo-driver-3d poulsbo-configThe system is a Dell Mini 12, which uses the Intel GMA500 Poulsbo chipset.

View 3 Replies View Related

Hardware :: Tweak An Intel Atom D510 W/ Integrated GPU - When Login - Background Doesn't Fade In Gradually

May 2, 2010

I have a new Intel Atom D510 and I'm pretty pleased with it so far. The board is Zotac NM10-ITX.

My first issue was that during long and fast downloads (like transferring my home directory over the network) the system become pretty unusable: web pages would time out, windows would take more than few seconds to load, etc. I solved this by recompiling the kernel for the Atom. (The compile time wasn't that bad actually because the system is pretty simple and it was easy to isolate only the drivers I needed).

My next issue is that certain GUI-related things seem a little sluggish. For example, when the GDM loads it's not smooth like on other computers. When I log in, my background doesn't fade in gradually, it does so in about 1-2 frames. I was thinking this might be an issue with the GPU. It uses the i915 kernel module. Is there some tweaking I can do?

Code:

I was expecting to see a memory region of prefetchable memory around 128M here. Is this a problem?

What are you atom users doing to speed up your systems? I'm on Archlinux and I'm using a BFS patched kernel.

View 1 Replies View Related

Ubuntu Multimedia :: Set / Increase External Monitor In Netbook With GMA 500 - Poulsbo

Jun 27, 2011

I couldn't find a way to set/increase the external monitor resolution using Ubuntu (10.10) with the PSB drivers. I tried to use the xrandr commands like shown here: [URL] without success.

View 1 Replies View Related

General :: Using A Netbook Nb305 Toshiba With A Intel Atom Processor With Netbook Os?

Oct 28, 2010

my play on linux wont work i go to download a game and it just freezes then it asks me to force quit or wait is because of the computer im using a netbook nb305 toshiba with a intel atom processor with ubuntu netbook os?

View 14 Replies View Related

Debian Multimedia :: Squeeze Compiling Dwm From Debian Source / Reality Check

Aug 18, 2011

Below is the recipe I've used to compile dwm from source on Squeeze

su
apt-get install devscripts debian-keyring
apt-get build-dep dwm
exit

It all seems to work, however debuild gave an error about secret keys. Is this a sensible procedure? What happens in the (probably unlikely) event there is another source patch?I've gone to a tiling window manager as the result of the purchase of a wide screen LCD monitor. I like to have some stuff down the right hand side when running Firefox and OpenOffice in the main panes. Any configuration tricks welcome. Modern screens are the wrong shape!

View 6 Replies View Related

Debian Multimedia :: Error When Compiling Wine

Apr 21, 2011

I'm trying to build a package from wine 1.3.18 following Soul Singin's post here but it gives me this error.

wine: configuration in '/home/user/.wine' has been updated.
wine: cannot find L"unix\tmp\wine-1.3.18\dlls\advapi32\tests\advapi32_test.exe.so"
make[2]: *** [cred.ok] Error 2
make[2]: Leaving directory `/tmp/wine-1.3.18/dlls/advapi32/tests'

[Code].....

This error only appear when I use dpkg-buildpackage not when I compile the source it with make.

View 1 Replies View Related

Debian Multimedia :: Compiling Scribus 1.5 From Ubuntu PPA Source

Oct 20, 2015

I have already open a thread in scribus forum but I am not sure if they know the solution, and I don't think is specifically related to scribus. I am receiving a generic unknown cmake error with QT5 library when try to compile Scribus 1.5, probably I need to install some library more but which?

Code: Select allcmake ../scribus -Wno-dev -DCMAKE_INSTALL_PREFIX:PATH=/usr/local/bin/
CMake Error at styles/CMakeLists.txt:21 (QT5_WRAP_CPP):
  Unknown CMake command "QT5_WRAP_CPP".

-- Configuring incomplete, errors occurred!
See also "/home/myuser/Compilati/scribus-1.5.0/builddir/CMakeFiles/CMakeOutput.log".
myuser@Debian-635:~/Compilati/scribus-1.5.0/builddir$ cmake ../scribus -Wno-dev -DCMAKE_INSTALL_PREFIX:PATH=/usr/local/bin/
CMake Error at styles/CMakeLists.txt:21 (QT5_WRAP_CPP):
  Unknown CMake command "QT5_WRAP_CPP".

-- Configuring incomplete, errors occurred!

View 14 Replies View Related

Debian Hardware :: Atom N450 So Hot / What To Do?

May 19, 2011

I've a e-machine netbook with the atom n450 processor.
Even with a non-stressing use (only browser ad music player) the cpu gets too hot.
Today with lm-sensors i detected a 58C temperature.
It's not a sensor problem because if i touch it i feel it really hot.
With Windows xp i haven't this problem.
The frequency scaling works (i don't know if well) because with conky i see it change.
What should i do or try?
On the system all the packages I've installed comes from the repository, all but volume icon.

View 1 Replies View Related

Hardware :: Compiling The Official Driver From The Intel Site But The Compilation Fails?

May 22, 2010

I'm using Vector Linux for years without any issues, But I'm really paining with configure X for perfect performance for my newly bought(only 1 month old) PC (which has the intel 845G graphic chip)

I also tried compiling the official driver from the Intel site but the compilation fails.After that I used i810 driver in xorg.conf, Its not stable and not reliable. Finally(even now) I'm using vesa driver,Its stable but I cannot play videos.video grabs always.

View 2 Replies View Related

CentOS 5 Hardware :: Compiling Custom Kernel For Apple Intel XServe

Jul 7, 2009

I need to compile a custom kernel for my xserve1,1. Or are there people who already managend using centos on their intel xserve? The current centos 5.3 kernel configuration does not support EFI. Right now I am able to boot the installation of centos to the welcome screen
and get stuck at the part where I need to skip or run the cd test. (keyboard and mouse won't work)

Just the boot screen
Screen where I pick option 2, the cd installer
Image shows ubuntu but it is centos. forgot to change the menuentry description name in grub.conf
ROMimage present
The screen that I see after image 3
The screen that I see after image 3
The window of centos

I tried the centos 5.3 86_64 DVD and netinstall. I already managed to run debian/ubuntu on my xserve1,1 with use of refit + grub2 but I need centos to use cpanel...

My xserve specs:
Xserve1,1
Dual-Core Intel Xeon
Processor Speed: 2 Ghz
Number of processors: 2
Total number of cores: 4
L2 Cache (per Processor): 4 MB
Memory: 8 GB
Bus Speed: 1.33 GHz
Boot Rom version: XS11.0080.B01
SMC Version (system): 1.11f5
LOM Revision: 1.2.8

Installed:
OSX 10.5.7 server
Developertools: 3.1.2
refit: 0.13

View 6 Replies View Related

Debian :: Atom N270 CPU Loading - Slow

Mar 19, 2011

I found Atom CPU is slow when booting the system, screen shows "Loading Linux ......................", is it because the N270 is running at half speed before the kernel is completely load to memory?

Kernel 2.6.32 is even slow because the kernel image is bigger than lenny. Is there a way to speed up this?

View 2 Replies View Related

Debian Multimedia :: OpenGL 3.3 For Intel HD Graphics?

Aug 31, 2015

I have Intel HD Graphics video card on my laptop using OpenGL 3.0 with Mesa 10.3.2, but I need OpenGL 3.3.

Can I upgrade/enable OpenGL >=3.3 on Mesa for my GPU for Debian 8.1 Jessie? How can I do that?

Output of glxinfo | grep OpenGL:

OpenGL vendor string: Intel Open Source Technology Center
OpenGL vendor string: Intel Open Source Technology Center
OpenGL renderer string: Mesa DRI Intel(R) Ivybridge Mobile
OpenGL core profile version string: 3.3 (Core Profile) Mesa 10.3.2
OpenGL core profile shading language version string: 3.30
OpenGL core profile context flags: (none)

[Code] .....

View 2 Replies View Related

Debian Multimedia :: Intel HD 4600 And Two Monitors (DP And DVI)

Apr 17, 2016

I have the following situation:

- Intel HD 4600 and 2 Full-HD monitors (Dell IPS, same model)
- left DisplayPort, right DVI
- Debian stretch with Linux 4.4.0-1-amd64
- XServer X11R7.7 and Cinnamon 2.8.7

… and the following problem:

When I restart the system or login after Standby, usually (not always, but often) some strange green and red pixels appear on the monitor which is connected via DVI. I can remove them by changing the display settings and restoring the extended mode again. However, most of the time the XServer crashes by trying to enable or restore the dual monitor mode (although I’m still able to start a new instance of X from another tty). The XServer also crashes every time I try to enable the extended mode from another situation.

I’ve already tried the following:
- connecting both monitors via DP (no pixes, but also crashes)
- swapping the monitors and using different cables, assuming a hardware problem first (no change)
- VGA instead DVI (works, but inelegant).
- blacklisting i915 or using the xforcevesa boot option (neither of them works, i915 starts though)
- using the nomodeset boot option (detects only one monitor and produces a fallback in software rendering mode)

View 0 Replies View Related

Debian Multimedia :: No Sound With Intel HDA Kernel 2.6.30?

May 31, 2010

I get no sound with kernel 2.6.30-2-686 or 2.6.32-5-686. Works fine in 2.6.26-2-686. Card is found, it accepts streams but plays nothing to either internal speakers or headphones.

View 10 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved