Debian Installation :: Install Etch Kernel 2.6 In HP Server DL380G7

Mar 6, 2011

I have hp server DL380G7 with 4 G RAM and 2*146HDD. i wana install debian etch kernel 2.6 on it thes Os cannot find a CDROM on server and i have to resaerch about it i go to debian website and download etch-and-half and install it .debian recomands it Instead of using etch (kernel 2.6) Debian

bnx2-09-4.0.5.fw-files during the installation it was necessary.and my guy did and installation success.

But when Os gets the boot.have this error:

And when i confige the network i have problem And Os does not recognize network hardware.
the error is:

View 1 Replies


ADVERTISEMENT

Debian Installation :: Etch Install Just Started Warning About Untrusted Versions

Mar 17, 2010

I'm doing a fully automated install of Etch, installing the standard system task. I'm using PXE boot with a preseed file.

I do this a lot, and I've not had problems before. This morning, it's stuck at 5% on "Select and install software" saying "Please wait...". The log on console #4 says:

WARNING: untrusted versions of the following packages will be installed!

[snip]

Do you want to ignore this warning and proceed anyway?

I installed a system yesterday without any problems, so I wonder if there's a recent problem with the mirrors I'm using. My /target/etc/apt/sources.list contains:

deb [url]
deb [url]

So it looks like either the UK mirror or security.debian.org.

View 5 Replies View Related

Debian :: Install ETCH Over The Internet ?

Feb 17, 2010

I need to install Etch (not Lenny ) over the internet - but all my mirrors won't even entertain me. Is there a way to still install Etch over the 'net - as opposed to Lenny? I need Etch because of some specific software I am running - and I have to PXE boot (I've used the Etch netboot.tar.gz files).

View 6 Replies View Related

Debian Configuration :: Install Postgresql-8.2 On 4 Etch ?

Jun 13, 2011

I'm going on to install my old application running on specific old configuration (debian 4 etch) into my virtual machine...

This time, i'm hurting a new problem while installing postgresql in the release 8.2 (not 8.3, nor 8.4, neither 9.x cause my application will run only on 8.2).

Logging in root, i enter this (like in 2008) :

But today (year 2011 with old etch), when i enter this i got the error message than it cant find this paquets ! off course i did my apt update before.

So, what can i do ? i really need to install the exactly 8.2 release (even 8.2.21 will be good)

View 1 Replies View Related

Debian :: Debian Etch - Virtual Server - GUI?

Jun 18, 2010

I am renting a virtual server which is running Linux Debian Etch. I have access through the root account.

I am very new to virtual servers, and also very new to Debian Etch. I am happy I found this forum when trying to research on the Internet.

The things I need to know are:
- Comes Debian Etch with a GUI (graphical user interface) which I can use on the rented virtual server?
- And if not, I would like to ask the community here if there are any GUIs which I could install to that server, and how?

I want to be able to access the server in a much easier way than to have to type each command. I want to use that server to host domains, as soon as I am more self-confident with Debian Etch.

View 10 Replies View Related

Debian Installation :: Get Flash Working On Etch?

Apr 29, 2011

I need to get Debian ETCH working with Flash, due to professional issues I cannot update to a newer Debian distribution (Squeeze for instance) now.[URL]Which tells me to use swfdec0.4 or swfdec0.5. but the archive repository for Etch only provides this swfdec0.3 are there any repository able to provide this out of date lib

View 4 Replies View Related

Debian Installation :: Upgrade Sarge To Etch To Lenny?

Mar 29, 2010

<Big Red Flashing Sign that reads, "NEWBIE with two Linux books and very little brain"> I just installed Sarge from a CD onto an old PC and ended up with Debian Linux 3.1, Kernel 2.4.

PC Specs:
Spacewalker Mainboard (AK31V3.1) SocketA AMD Athlon/Duron Processor based DDR Main Board
2x 256MG DDR DIM Q
350w power supply
NVIDIA GeForce AGP8X 6200 Graphics Card 256 MB RAM
Award Modular Bios v6.00PG 12/05/2003
LG Monitor
USB Mouse, Standard keyboard

I did not configure any servers or do any package selections but did manage to get the internet connection working (actually Debian managed that all by itself). I'd like to "upgrade" to Lenny.

Do I need to upgrade to Etch first or can I go straight to Lenny? At what point do I "upgrade" the kernel (before upgrading to Etch/Lenny? After?)

View 10 Replies View Related

Debian Installation :: Etch To Lenny Libc Upgrade?

Apr 2, 2010

I'm trying to upgrade an etch system to lenny, I've updated my sources list to lenny and ran apt-get update. When I try apt-get install apt

apt-get install apt I get the following:

Reading package lists. Done Building dependency tree. Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. Since you only requested a single operation it is extremely likely that the package is simply not installable and a bug report against that package should be filed. The following information may help to resolve the situation:

The following packages have unmet dependencies.  apt: Depends: libc6 (>= 2.7-1) but 2.3.6.ds1-13etch10+b1 is to be installed Depends: libstdc++6 (>= 4.2.1) but it is not going to be installed E: Broken packages

if I try apt-get install apt libc6, it wants to upgrade a whole heap of packages - will this be a safe thing to do ?

View 3 Replies View Related

Debian Multimedia :: Re-install Etch Recently But Forgot To Backup /var/lib/dpkg Folder

May 16, 2011

I need to re-install Etch recently but forgot to backup /var/lib/dpkg folder, I know there's archive server provides old packages, but packages from www.debian-multimedia.org does not. I have tried its mirror sites but it seems they had removed the old packages from Etch and earlier releases.

View 7 Replies View Related

Debian Installation :: Blocked In Mirror Choice Screen For Old Etch Netinstall

Jun 12, 2011

i'm trying to intall an old etch debian release using the netinstall netinstall debian-40r9-i386-netinst.iso. But i've got an issue while configuring the miror. Here where i'm blocked (it seems my archive miror is not right but why ?): in the previous screen, i entered the right path (i think): and as you can see in my screen cap of the broswer, the website of the archive is right, so where am i go wrong ?:

View 2 Replies View Related

Ubuntu Installation :: Install Karmic Xen DomU On Etch Dom0 Via Debootstrap?

Mar 10, 2010

I have an etch-based Xen server that has several Xen domU's on it. All the domU's are etch or lenny based, but I'd like to install a karmic guest. I use xen-tools to install my domU's - e.g., xen-create-image --debootstrap <etc.>After much googling, I've found bits and pieces of info that have gotten me closer to the goal, but the debootstrap script I have is for hoary (I think etch came with this), and I'm pretty sure this won't work.

If you have been able to successfully install a Karmic guest on an etch or lenny host, I'd be very grateful for pointers.

View 1 Replies View Related

Debian Installation :: Upgrade Etch To Lenny: No Version Bump, Auto-start Services?

Feb 24, 2010

On my debian web server I curently have ImageMagick 6.3.7 08/07/09 Q16 since this is an old version of imagemagick i wanted to upgrade my system that still runs etch, and afterwards upgrade imagemagick. I can not see what version the current lenny imagemagick package has, but I assume it is newer then 6.3.7, no?

When i ugraded I found out that my apt-sources used stable rather than etch. So I already had a mix of lenny and etch I suppose. I then had > cat /etc/debian_version 4.0 Before I upgraded I changed my apt sources from stable to etch, updated the package-tools and did a dist-upgrade (for details, I followed these instructions). After restarting I have still 4.0 as debian version. Also uname -r is 2.6.17. How can I do a correct update?.

Also my services were not started (ftp,ssh, apache2), so I asked my hoster to start the ssh service. This morning everything was up again, but it seems like nobody there have had a look at this. How do I absolutely ensure that my ssh service is start at boot. It is a remote webserver, so I need at least this service to be running.

View 2 Replies View Related

Debian Configuration :: Nfs-kernel-server Can't Install ?

Sep 28, 2010

I'm trying to install nfs-kernel-server on my squeeze and have strange error.

Here the console output:

The following NEW packages will be installed:

I tried to google for this errors and find that manually restarting nfs-common, portmap should help but no luck.

View 1 Replies View Related

Debian Installation :: New Install Debian As VB Host With Kernel Error

Feb 22, 2010

I'm somewhat familiar with Ubuntu (familiar but not sharp!) but have never tried Debian OS until now. I've installed Debian 5 64bit as a guest on a Mac host. I'm impressed how smooth the install went; even installing VB Guest Additions went smoothly. But, I get a "Your system had a kernel failure" error after booting. I have searched the forum & didn't find this error. Everything seems to work okay but is there an update that isn't showing in the Update Manager? Could this have something to do with VirtualBox 3.1.4?

View 4 Replies View Related

Installation :: Install Vanilla Kernel To Other Ubuntu Server?

Jun 13, 2010

I am trying to compile a new vanilla kernel on to my Ubuntu server system which has been freshly installed with Ubuntu 10.04 server 32bits. As this will run on a VIA epia-px5000eg mainboard with USB stick I want compile this kernel on a different machine on which is also ubuntu 10.04 installed. Unfortunately currently I experience difficulties when I boot kernel 2.6.34; it says "Kernel panic - not syncing: VFS: unable to mount root fs on unknown block" while if I load to original kernel that comes with Ubuntu 10.04 all works perfectly well. BTW reason I want to build a custom vanilla kernel is to trim down kernel to the necessary services I need as I am running a server that requires just the essentials. And it needs to support the VIA Epia CPU processor family ( C3, C7 or generic setting which is another hurdle which I won't discuss here ).

Hopefully one out there is able to guide me further as I type step by step what I executed. Thanks for your replies in advance:

Yet I hook up the VIA epia-px5000g with 2gb usb stick, a dvd drive and keyboard ( all usb ). Boot from CDrom and install a minimal system (<f4>) to usb stick. Partitioning part I set it to EXT4 and used full size thus no SWAP. Also mount option " noatime " has been set all to save writes to usb stick.
When the base system has been installed a user has been added, as well apt is being configured to install only security updates automatically. As services I want to run definitely openSSH-server so I can access remotely. Grub gets configured and system will be rebooted.

At this stage I configure the network interface to a static address so I do not need to check my router all the time which dhcp address Ubuntu is using if I want to access remotely.

Now the compile part starts, the ubuntu way. I log in to my other system and execute following commands accordingly code...

View 2 Replies View Related

Debian Installation :: Kernel Version On An Install CD/DVD/image?

Apr 26, 2010

I have the Debian Testing CD1 (20100228). How can I find out the kernel version it will install?

View 4 Replies View Related

Debian Installation :: Kernel Failure After Lenny Install (on Core I7 870)?

Jan 5, 2011

I just installed the lenny (amd64) on my new core i7 870 computer (with netinst), but the kernel failure message appeared everytime I booted into gnome. I don't know how to solve this problem. Sorry I don't have much experience with installing linux, though I have been its user for a few years.

View 4 Replies View Related

Server :: Old Redhat Server Upgrade The Kernel With The Command Yum -y Install Kernel

May 24, 2010

My company support a client with an old Redhead server " Linux version 2.6.9-5.ELsmp [URL] (gcc version 3.4.3 20041212 (Red Hat 3.4.3-9.EL4)) #1 SMP Wed Jan 5 19:30:39 EST 2005" My IT department wants to move this old server to a VMware machine and I'm trying to check if this project can fly. Me my self never worked on an old Linux server there for my first question is can I upgrade the kernel with the command yum -y install kernel..... and when I'm done I'm still going to have the old kernel just in case?

View 1 Replies View Related

Debian Multimedia :: Ripping Mp3 Cd On Pressario And Debian Etch

Feb 2, 2010

I have an old compaq pressario (with a compaq cd/dvd player + HP cd writer/Reader) with Debian Etch and a gnome desktop, and I would like to extract the mp3 dvd a friend gave me (He made it from bittorrent). On a XP box the cd is played without problem but I would like to extract and play each song on Etch. I have Sound juicer which works allright for usual audio cd but not with this mp3 thing. I have tried to define a new profile with params I have found on the net for mp3 but up to now without success. I even don't know if it's a problem of hardware being too old, or if I could solved this with the appropriate software

View 6 Replies View Related

Debian :: Python 2.6.4 On Etch 4

Apr 15, 2010

I was able to compile python 2.6.5 on debian 4 etch successfully. The contents of /usr/share/python/python_defaults are now like this:

Typing "python" on terminal now starts the correct version which is 2.6.5.

The next thing I installed wxPython from wxWidgets repository. I followed the instruction explained here:

[url]

When installation was about to finish, I got this error:

I am sure something I have missed something before installing wxPython. It seems it's related to "python_defaults", but I am not sure.

View 3 Replies View Related

Debian :: Clamav 0.96 In Etch

Sep 23, 2010

There is a "Debian" way to get clamav 0.96 in Debian Etch 4.0 ?

I put volatile repository in my sources.list, but after upgrade I've:

Quote:

View 1 Replies View Related

Debian :: Live CD's Of The Last Revision Of Etch ?

Feb 25, 2011

For archiving purposes, I am looking for the different (Gnome, KDE, Xfce) live CD images of the last revision (9) of Etch. I want a copy of them to compare how the system and the desktop environment have evolved in the last couple of years. Actually, I would also like to have live CD images of older releases, but I don't know if they exist.

View 5 Replies View Related

Debian :: Best Way To Migration Etch To Lenny?

Mar 16, 2010

actually my Debian is still in Etch stable version. What is the best way to migrate to stable lenny version

My understanding was :

replacing Etch links in sources.list with Lenny links perform aptitude update & aptitude safe ugrape.

View 1 Replies View Related

Debian :: Apt-get Update Does Not Work (Etch)?

Jun 21, 2010

tried to to run apt-get update (under Debian Etch)but it does not workI get the output (see apt_get_output.txt)I also tried running apt-get upgrade first, but that did not change anything.My sources list looks like (see sources.txt)

View 8 Replies View Related

Debian :: Cannot Upgrade From Etch To Lenny

May 18, 2011

I try to upgrade Etch to Lenny and get the following problem:

Code:

# apt-get update
# apt-get dist-upgrade
Reading package lists... Done
Building dependency tree... Done

[code]....

View 7 Replies View Related

Debian :: ETCH Usb Harddrive Mount

Jan 28, 2009

I have two ext3 drives recovered from a failed NSLU2 network file server. I need to recover some of the files stored on them, so...I attempted to mount them on my debian ETCH (LV file system), thus:

# mkdir /mnt/usbdrive

# mount -t ext3 /dev/sda1 /mnt/usbdrive

Instead of seeing the drive content I see my harddrive's GRUB & Kernel partition. What am I doing wrong? What do I need to do to see the drive's content?

View 1 Replies View Related

Debian :: Upgrade From Etch To Lenny?

Apr 21, 2011

I've a very old server with Debian Etch, and now I need to upgrade to Squeeze. I think it's correct to upgrade first to Lenny, so I followed this link:

[URL]

[code]....

Score is -2280

Accept this solution? [Y/n/q/?]

View 2 Replies View Related

Debian :: Update Debian 4.0 ''etch"?

Jan 8, 2011

I can't update Debian "etch" Is there any sites for updating?

View 9 Replies View Related

Debian :: No Incoming Emails On Debian Etch

Mar 2, 2011

I have recently started working on our server. My knowledge about *nix systems is very limited, so I turn to the oh-so-friendly internet community for help.The server is running Debian Etch, postfix, courier and some other stuff. And suddenly out of the blue the emails from the internet are not being received. Emails being sent internally are being received and everyone can browse the internet.Host or domain name not found. Name service error for na$for name=xxx.xxx.xx.xx.list.dsbl.org type=A: Host not found, try again.Does anyone have any experience with something like this? I would love to get this thing fixed.

View 6 Replies View Related

Debian :: Debian Etch Repository - Several Error

Aug 23, 2010

I need to install some package on a very old box with Debian Etch.

When I type: apt-get update

I get several error:

Quote:

Where can I find a valid etch repository?

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved