In process of installing gnome have hit an error wall from dpkg too many errors. Tried increasing the allowed errors in dpkg.cfg to 150 and still get the errors. The errors now come up on any apt-get install.
ADDED: sent the output to file and the errors start with python2.5-minimal(2,5,43).
I checked the md5sum of the iso image, and the integrity of the DVD passes, but when I run the kfreebsd-amd64 DVD I get to the partitioner stage, set out my partitions, click 'yes' to format and then my computer reboots. Is this a known error or a bad burn?
Installing Debian on a new laptop and read that Debian-Installer (DI) can create an encrypted partition (/home) during installation.However, when I went through installation and started the manual partitioning (standard, non-lvm) , I am unable to locate the encryption option.
Another option that nobody suggested me to boot Wheezy is to use the kfreebsd kernel. Although, I installed the BSD kernel, I am still unable to boot Debian using it. To do this I am using the grub-pc shell.Could anyone explain the meaning of these lines and how they relate to Debian?
I installed Debian GNU/Linux and Debian GNU/kFreeBSD on the same system. I didn't reinstall grub with kfreebsd, because I figured running grub-mkconfig would modify grub.cfg. But it didn't.It recognized the Debian GNU/kFreeBSD as GNU/Linux (6.0.1):
### BEGIN /etc/grub.d/30_os-prober ### Found Debian GNU/Linux (6.0.1) on /dev/sda3 ### END /etc/grub.d/30_os-prober ###
Feel stuck between Debian and BSD worlds - not sure where to turn.
Running GNU/kFreeBSD debian 8.1-1-amd64 and base system working. Can not get X or xrandr to co-operate and use proper resolution of 1680x1050. I believe the basis of this is that it using the VESA drivers and instead should be using the INTEL drivers.
I have no 'pkg_add' for ports, plus obviously no Debian repos will help for this .... unless there are some specific kFreeBSD repos I dont know about? I can post more details on the system, but am hoping that there are other options besides compiling. I can do that if need be, but not even sure which one to use. Will these work on this system? [URL]
user@debian:~$ uname -a GNU/kFreeBSD debian 8.1-1-amd64 #0 Mon Feb 21 22:03:13 UTC 2011 x86_64 amd64 Intel(R) Pentium(R) 4 CPU 3.00GHz GNU/kFreeBSD user@debian:~$ lsb_release -a No LSB modules are available.
I am trying to install windows 7 on my harddive, I am running ubuntu 10.04 and have windows 7 on DVD.I was until recently also using uberstudent, which I deleted (100 gigs) to make space for windows.However once I get to the windows start up I get a message: setup cannot detect or create a partition for this partition. (not word for word).
i tried installing windows 7 on a partition on my laptop but i'm getting this message:"setup was unable to create a new partition or locate an existing system partition "i tried googling and found that it has something to do with the number of partitions:my hard disk layout right now:
I'm trying to install Debian on a USB to create an encrypted partition, I get an error message saying I need to install missing firmware rtl_nic rtl8168d-2.fw.So I download that file and try again this time I get an error " There was a problem reading data from CD Rom" .I not using a CD Rom I put debian on the USB as an ISO file first using Unebutin then tried Rufus.
I have an unallocated space at the end of my hdd, which is about 10 gb. I installed Pardus on that space, but then deleted the partition to install something else (I know I did not have to delete it, I could simply install the new thing over it), i dont remember exactly how, but it was from my Debian System, not from a LiveCD.Now, I am unable to use that space. GParted gives an error and says:Warning: the kernel failed to re-read the partition tableon /dev/sda (Device or resource nusy). As a result, it may not reflect all of your changes until after reboot.
First I tried to create a new partition within windows but Ubuntu never liked it. Finally I just went to intall it on the whole hard drive and it froze during the who are you screen trying to get a time from the network time server. I read something that said restart and now I cant boot my laptop
just about to install Fedora 10 on my MSI WIND laptop and read abit about file system on Linux and come across alot of recommendations on how many logical mounts or partition to create..so far i have created /boot of 100MB.i'm unsure of what sizes i will give to my [root] / and /home and /swap
i am thinking of assigning 1GB to /swap which leaves me with 40GB left for / and /home.i'm going to install alot of softwares and probably try out wine as well.i want a separate /home directory incase i change distro then i'll keep it... where does the programs go to under?
I was a Jaunty user and then updated to Karmic. Wireless went from being sporadic in Karmic to non-existent after I tried the wrong fixes. I've changed so many settings and tried so many fixes that I don't know which way is up with the wireless. I'd like to start from scratch. If I install from CD, will it just write over my current ubuntu partition? Will the contents of home stay intact or will everything disappear? Do I have to create a new partition?
Im running a dell studio xps 16 computer with windows 7. Im now trying to install a dual boot with ubuntu. My problem is that ubuntu refuses to create a new partition, claiming that i already have 4 main partitions. According to any partitionprogram run in windows I only got 3. It looks likt this in Gparted (from live cd):
The 40 mb partition is probably for some dell recovery stuff. The 100 mb partition is some windows 7 backup, it is also flagged as "boot".. The 87 gb partition is my main windows 7 disk. I have no clue what the 797.5 KiB is for. It dosnt show up anywhere when looking at partitions in windows. I also tried deleting it from ubuntu (live cd) and then booting windows again, and when I booted ubuntu again it was there even tho i deleted it last time. What the hell is this? Can I just delete it and move on with installing ubuntu? Or should I instead delete the fat16 system reserved partition?
So I was just partitioning my hard disk to get it ready for installation of multiple Linux distributions and that's where it happened. I booted up my notebook using an Ubuntu 10.04 Lucid Live CD and used GParted to partition my hard disk.
First, I created an extended partition that would cover my whole hard disk (don't worry, I backed-up everything twice and stored it on my server). Then, I decided to skip the first GiB of my hard disk and started creating multiple ext4 partitions (10 GiB each) and labelled them so I'll be able to tell which partition contains which distribution later on. When I was satisfied with the result, I created multiple 100 MiB ext4 partitions at the very beginning of my hard disk (the first GiB of unallocated space, remember?) which I'm planning to mount as boot partitions for each distribution. But, when I successfully created 16 logical partitions in total, GParted refused to create a 17th partition, let alone an 18th and so on...
Now my question is: is GParted unable to create more than 16 partitions on a single hard disk, or is it a known fact that an extended partition cannot contain more than 16 partitions (so that it would be wrong to blame GParted for this). So, is it possible for me to create more than 16 partitions using a work-around or manually partition my hard disk using the terminal, or should I not create as much partitions on my hard disk?
As mentioned here I am planning on installing with encryption. This involves using LVM in the partition scheme.
I am following this guide here which uses Mandriva to do the installation. [url]
However, I notice that GParted doesn't seem to have any support for LVM, which is going to be a pain in the rear if I subsequently try to add Ubuntu to the Mandriva boot setup.
The problem I have with DiskDrake (Mandrivas partition editor) is that it only seems to be able to put partitions at the beginning of the drive and it doesn't seem to be able to move partitions. e.g. if I want to create a new partition at the end for swap and leave some unallocated space in the middle for my future Ubuntu installation I am stuck. GParted allows me to create at the end or effectively move it by resizing the beginning and end of the partition.
DiskDrake allows me to create and edit LVM partitions.
Is there perhaps another partition editor that does both? Or maybe a development version of one that does it? Or some option I am missing?
I don't speak english very well so forgive my grammar errors ! Well, my problem is: I'm installing Ubuntu 9.04 in my netbook Asus 1000Ha EeePc. I'm installing that version because I had downloaded it some time before and I didn't want to download again.
I've created a bootable USB with UnetBootin from Windows XP. Installation is perfect until I try to create a new partition. I mean, I want a dual boot with Windows and I've edited a NTFS partition to get free space (30 Gb). This free space is not formatted. When I put the cursor on the free space, "New partition" button is disabled. That means, that I can't create swap or none of the required partitions I need to install ubuntu.
There is more, I used the same version of the installer in a CD when I installed Ubuntu in my desktop computer. There were no problems and installation worked! Now, I have 30 Gb of free space that Windows can't see... and I can't edit it for Ubuntu... Does anybody know how to solve this? I really want to install ubuntu because I need it for University.
I just started using ubuntu on my laptop... At the moment is the only operative system available on my machine.Unfortunately I need to install Windows 7 too because I need it for my job.can somebody please help me creating a partition and installing windows?will I be able to access the files stored on my pc from both the operative systems?I recently replace the hard drive and at the beginning I created a bit of mess because I first installed windows 7, than ubuntu on a partition (splitting the hard-drive about 50%) and then, as I was having problems with windows I decided to just keep ubunto, so I reinstalled it on the hole hard drive (I guess)
I am using Ubuntu 11.04 on my sisters computer which I am borrowing until my laptop gets fixed by Dell *sigh*
The only catch was that I had to remove the virus thats been plaguing this computer any means necessary my plan was to delete the windows 7 partition and put Ubuntu in its place temporarily.
My sister didn't have the Windows 7 DVD that was given to her *sigh again* but she did still have the key labeled on the side of the machine. So my plan than included to download that .iso of Windows 7, and then use setup.exe.
So, my GParted (Ubuntu) won't create an NTFS partition (the option is greyed out). I'm trying to create an NTFS partition to allow for a Windows 7/Ubuntu dual-boot. Everywhere I check, they suggest either creating the NTFS partition in GParted BEFORE installing Windows OR leaving it "unallocated" with the Linux partition after it.
I have tried both now, with two results:
1) GParted can't create an NTFS partition within Ubuntu 9.10.
2) On the other hand, the Windows 7 Installer says that Windows can not create a partition or find a partition when I attempt to select the "unallocated" portion.
I am trying to create a partition using gparted for my centos installation but I accidentally deleted my partition table. my partition was created on windows7 and dual boot with ubuntu. I am trying to recover it using test disk with ubuntu live cd but after I recover it still I neither can't boot on windows or Ubuntu here is the result of patition quick seart
I have several partitions on my hard drive, and like to use the 'Create Custom Layout' option during the installation process, to make sure that I don't loose any of my existing partitions or the data on them.
I have attempted a minimal F12 installation from Fedora 12 DVD. But the 'Create Custom Layout' option is not an option in the menu.
How do I install F12 and tell anaconda exactly which partitions I want to use and format?
My current working partition layout is shown in the attached screenshot.
I want to use the following custom partition layout during the initial F12 installation:
This allows me to share existing partitions between my current working F10 root partition, and the newly-installed F12 root partition. So if there are problems with the new F12 installation, I still have a working F10 system to fall back on.
The other partitions with data on will be mounted when the intiall installation has been completed
I just downloaded the new fedora and proceed to install it into a free space of 11GB on my HDD. As such the partitioner is unable to create more than 1 partitioneven if free space is available, it reports not enough free space seen if its present. As such it can create only one of the three partitions i.e., swap or / or /home duw to which cannot proceed ahead.' Some more details me running Xp as the other OS on my system.
I have a 80GB HDD on which I have installed Ubuntu10.04. I have about 45GB space remaining. I am trying to install Fedora13. I create : 2GB / partition - 2.4GB swap partition. I want to create 6GB /usr partition and it says not enough disk space? Why is it giving that message?