Debian Installation :: Wheezy On Newer Intel I210 Ethernet Controller?

Jul 31, 2013

I just bought a new server with one of the most recent v3 Intel processors (socket LGA1150). The board (Supermicro X10SLM-F) uses the new Intel NICs (i217LM + i210AT), not supported by the current Debian stable release. Hence, the ethernet adapter is not recognized during the installation process.

I would like to be able to install something as close to stable as possible in a production server such as this one.

View 12 Replies


ADVERTISEMENT

Debian Hardware :: Ethernet Card Intel I217-LM Not Recognized By Wheezy

Mar 7, 2014

I tried to install the latest stable version of Debian (download yesterday : Debian Wheezy 7.4.0) on my new computer Fujitsu Celsius W530.The version installed is exactly this one (given by the commande "uname -a") :

PCNAME 3.2.0-4-amd64 #1 SMP Debian 3.2.54-2 x86_64 GNU/Linux
=> A Debian Wheezy 64 bit

I have a problem with the Intel ethernet card : I217-LM (the model was verified on the Fujitsu specifications and also on the Windows 8 I use on another partition).During the install procedure, Debian did not find the ethernet card.I continued the install without it and after I tried to make it found.I got a Linux driver in the Intel Web Site but I saw after that Debian loaded yet this driver (e1000e), so I did not install the driver from Intel (I needed to get linux-headers and to compil the files).

So when I force the system to load the driver, it gives no error but the device is still not found when I try to bringup the network interface.URL...

- understand why I see the Device (with "lspci" command) and the module "e1000e" (I tried also the "e1000" one) loaded with "lsmod" command ?
- make the card work to allow my debian for connecting to internet ?

Here some commands which can show you the problem :
Code: Select all~# lsmod | grep e1000
e1000e                120822  0
root@PC-DEV-JB-debian:~# ll /lib/modules/3.2.0-4-amd64/kernel/drivers/net/ethernet/intel/e1000e/e1000e.ko
-rw-r--r-- 1 root root 184K févr.  2 02:04 /lib/modules/3.2.0-4-amd64/kernel/drivers/net/ethernet/intel/e1000e/e1000e.ko

[code]....

View 5 Replies View Related

CentOS 5 Hardware :: Intel 82598EB 10G Ethernet Controller

Mar 12, 2010

Does centos 5.4 support this?

product code: E10G41AT2

[url]

View 1 Replies View Related

Networking :: Ethernet Intel Gigabit Controller Is Broken Or That Atheros Driver Is Missing?

Apr 21, 2011

I have an ASUS P5Q PRO motherboard with an integrated Atheros AR8121/AR8113 PCI-E Gigabit Ethernet Adapter.I installed Ubuntu 10.04 "Lucid" 64bit Kernel version 2.6.32.21 I have read that the driver isn't in the kernel, but there's a strange thing :

First if I try to run lspci from command line it doesn't reports Atheros Ethernet Controller.

Second If I try to run lshw -C network from command line it doesn't reports Atheros Ethernet Controller.

Third if I run ifconfig it only returns my loopback address.

Can I suppose that my Ethernet Intel Gigabit Controller is broken or that Atheros driver is missing?

View 4 Replies View Related

Debian Hardware :: HP P410 Controller On Wheezy (server Freeze)

Nov 22, 2014

I have a very weird problem with a HP DL180 G6 server that uses this controller.

The server has 4 SSDs configured as separate logical devices (no hardware RAID). I can install Wheezy just fine (creating a software RAID1 from sda and sdb). I installed zfs on it and installed a Windows 2008 VM on kvm with the disk image stored on zfs. The entire server froze when Windows was installing updates.

I rebooted and everything worked again, this time I launched iostat -x 2 on a separate ssh session, here's whet I saw after the server froze again:

Code: Select allavg-cpu:  %user   %nice %system %iowait  %steal   %idle
           0.25    0.00    0.19   20.83    0.00   78.74

Device:         rrqm/s   wrqm/s     r/s     w/s    rkB/s    wkB/s avgrq-sz avgqu-sz   await r_await w_await  svctm  %util
sda               0.00     0.00    0.00    0.00     0.00     0.00     0.00     7.00    0.00    0.00    0.00   0.00 100.00
sdb               0.00     0.00    0.00    0.00     0.00     0.00     0.00     7.00    0.00    0.00    0.00   0.00 100.00

[Code] ....

Thinking that zfs might be causing this, I destroyed the zpool, configured software raid on sdc and sdd, created a volume group and stored the image on a logical volume. The problem happened again.

I opened a ticket with the support of the company that provides the server and they updates the firmware of the controller. Now the server no longer froze while installing Windows updates, with lvm or zfs, so I went back to zfs.

Wanting to be sure, I launched iometer on the windows VM and set it to "4KB, 75% read 100% random" access pattern over 5GB of the Windows drive. The server froze after 7 hours.

I told the company that, and they replaced the SSDs with ones of a different model. I ran the test again and the server froze again, this time after 9 hours. I asked the company to replace the whole server. They did it (but kept the SSDs), I ran the test again and the server froze again, this time after 20 hours.

Now, this is starting to look like some kind of incompatibility between the HP controller and Debian rather than a problem with the controller. The settings are all default. It looks like the entire controller freezes because the system drives (sda, sdb) also show 100% busy despite not being under test from iometer.

View 0 Replies View Related

Debian Hardware :: Crash With Intel Chipset And Newer Kernels?

Aug 31, 2010

What seems like forever ago now I tried to install Linux on this Intel 82855GME chipset laptop I was given. I started off with Fedora because it's what I'm most familiar with, unfortunately the live disk would crash at GDM so I could never get anywhere with it. Even doing a console based install would crash, but it at least pointed me in the right direction, it seemed the kernel was crashing for some reason (see image)Fedora livedisk crashlivedisk-error.jpg (95.96 KiB) Viewed 695 times

View 14 Replies View Related

Debian Hardware :: HDA Intel Super Quiet With Newer Kernels?

May 27, 2011

I'm running kind of a mix between Wheezy and the occasional package from Sid. I've got the 2.6.32 kernel installed, as well as 2.6.38 and 2.6.39.

With the first kernel (2.6.32), my sound is normal, everything works fine. With the latter two, even using the same driver, my sound is quiet even with the volume up all the way, not to mention that somehow the available volume controls change along with this update. I was wondering if anyone else has experienced something similar, and if they managed to fix it or work around it without just booting into the older kernel?

View 2 Replies View Related

Debian Configuration :: Wheezy Radeon / Intel Graphics Switcheroo?

Apr 16, 2011

I have an Acer Aspire TimelineX 4820TG. I'm running Wheezy and I can't seem to get switcheroo working correctly. I was running Squeeze, then upgraded to Wheezy because it had a kernel over 2.6.33 with switcheroo built in. Below is the layout of my build...

(~)$ uname -a
Linux skipjack-debian 2.6.38-2-686 #1 SMP Thu Apr 7 05:24:21 UTC 2011 i686 GNU/Linux
(~)$ lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18)
01:00.0 VGA compatible controller: ATI Technologies Inc Redwood [Radeon HD 5600 Series]

[code]....

View 5 Replies View Related

Debian Hardware :: Serial Port I/O Error On Intel NUC With Wheezy

Mar 23, 2015

I have a problem getting Serial Port working on INTEL NUC DE3815TYBE. I have Debian Wheezy installed with kernel 3.16.0-0.bpo.4-amd64.

When I do :

Code: Select allsetserial -g /dev/ttyS*

I get:

Code: Select all/dev/ttyS0, UART: 16550A, Port: 0x03f8, IRQ: 4
/dev/ttyS1, UART: 16550A, Port: 0x0000, IRQ: 19
/dev/ttyS2, UART: 16550A, Port: 0x0000, IRQ: 19
/dev/ttyS3, UART: unknown, Port: 0x02e8, IRQ: 3

I can connect to ttyS0 - ttyS2 without any problem but ttyS3 is not working and I am getting this error:

I call command:

Code: Select allstty -F /dev/ttyS3 9600 cs8 cread clocal

I get:

Code: Select allstty: /dev/ttyS3: Input/output error

I am running the commands as ROOT. I also tried: setserial /dev/ttyS3 irq 3 uart 16550A skip_test but I am getting the same stty: /dev/ttyS3: Input/output error

Output of:

Code: Select alldmesg | grep tty

Code: Select all[    0.000000] console [tty0] enabled
[    0.952559] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.953593] 0000:00:1e.3: ttyS1 at MMIO 0xd0810000 (irq = 19, base_baud = 2764800) is a 16550A
[    0.954072] 0000:00:1e.4: ttyS2 at MMIO 0xd080e000 (irq = 19, base_baud = 2764800) is a 16550A
[  27.740208] ttyS2 - failed to request DMA

[Code] .....

lsof /dev/ttyS3 doesn't return anything so it means there is nothing connected to ttyS3 I guess but I am not very skilled with linux so I might be mistaken

Why I can see 4 ttyS* in my Linux but physically I have only 2 physical Serial Ports on the board?

View 2 Replies View Related

Debian Configuration :: How To Install Ethernet On Intel I7 Amd64

May 25, 2011

Go to "/lib/modules/2.6.32-5-amd64/kernel/drivers/net/e1000e/" and delete the e1000e.ko-file

Then download [URL]

Take the newly downloaded e1000e.ko-file and move it to "/lib/modules/2.6.32-5-amd64/kernel/drivers/net/e1000e/"

And finally load the module with either: "# modprobe e1000e" or "# insmod e1000e".

You should now have a working ethernet connection.

If connection is lost on system restart try rmmod e1000e; modprobe e1000e

I've for the first time installed linux (debian) to my computer. And I have a problem with ethernet that I can't solve.

I have a Asus Sabertooth P67 motherboard with built in ethernet card, I cant find any drivers for linux, I've tried google, Asus support page etc, but can't anything that says it will work with my computer, just a alot of windows drivers.

where I can find the drivers? Or if there's another way to solve the problem. When installing Debian i could choose between different drivers but no one worked, I've also tried with my motherboard CD but there was just windows drivers...

CPU:
Intel i7 3.4 GHz.

View 14 Replies View Related

Networking :: Ethernet Controller Missing After Reboot?

Jun 12, 2011

I use Linux Mint Debian XFCE and there was a large update (lots of programs) I have done prior to rebooting. After reboot, my computer can now no longer find the ethernet controller anymore in lspci, so my wired connection no longer works.

Is this a hardware issue? The green lights are all blinking fine though.

View 1 Replies View Related

Ubuntu Networking :: Start The Dc Driver For Ethernet Controller?

Mar 23, 2010

I just installed the latest version of Mint xfce on my old inspiron 8000 with a microsoft MN-120 pci ethernet card, and though the card shows up as hardware, it is not recognized as a network interface. I believe there is no driver loaded for it.

It's an old card, but it seems the kernel still supports it. There are instructions for activating the dc driver that appears to be the proper driver for this chip set, but those instructions originated from freebsd and I'm not sure they translate well. See here:[URL]

I did find a kernel config file, but I was afraid to add the suggested lines to it because there were no other lines specifying "devices". They all started with "config".

View 2 Replies View Related

Networking :: No Eth0, Driver For Ethernet Controller Issue ?

Jul 3, 2011

i am having issues with networking on a certain liveCD.all ubuntu installs ive done on this machine im sure work fine, but i may have had issues with older backtrack versions.My issue is no networking on boot of SamuraiWTF, for those unfamiliar its based on ubuntu 9.04 There is nothing except lo loopback when i run 'ifconfig', and there is nothing in /etc/network/interfaces for eth0 either.

lspci shows a Broadcom driver, but the same command shows the model number etc on a newer ubuntu install on the same machine. This is:

Broadcom NetLink BCM57780

I have the latest .tar.gz of the tg3 drivers suggested by Broadcom, but im lost on how to install them.

-------------------------------------------------------
EDIT: it seems to be an issue with earlier kernels, i installed 2.6.35 and it worked but the kernel isnt mean for 9.04 i dont think, and now theres issues with the nvidia card

View 4 Replies View Related

CentOS 5 Hardware :: Broadcom Ethernet Controller Not Recognized?

Sep 7, 2010

Running CentOS 5

System see the device with an lspci, yet will not load

Vendor:Device ID is 14e4:1691

Broadcom BCM57788 on board ethernet controller

Cannot find driver or anyone that seems to support it. Am I missing something?

This is in a Dell computer.

View 10 Replies View Related

Ubuntu :: Intel RAID Controller - Showing 2 Drives?

Apr 24, 2010

I shall start off by saying that I have just jumped from Windows 7 to Ubuntu and am not regretting the decision one bit. I am however stuck with a problem. I have spent a few hours google'ing this and have read some interesting articles (probably way beyond what the problem actually is) but still don't think I have found the answer.I have installed:

Distributor ID: Ubuntu
Description: Ubuntu lucid (development branch)
Release: 10.04
Codename: lucid

I am running the install on an old Dell 8400. My PC has an Intel RAID Controller built into the MB. I have 1 HDD (without RAID) (which is houses my OS install) and then I have 2 1TB drives (These are just NTFS formatted drives with binary files on them nothing more.) in a RAID 1 (Mirroring) Array. The Intel RAID Controller on Boot recognizes the Array as it always has (irrespective of which OS is installed) however, unlike Windows 7 (where I was able to install the Intel RAID controller driver) .Does anyone know of a resolution (which doesn't involve formatting and / or use of some other software RAID solution) - to get this working which my searches have not taken me too?

View 2 Replies View Related

CentOS 5 Hardware :: Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller ?

Mar 31, 2011

I am a newbie who's having trouble installing drivers for Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller.

I already have the drivers from my motherboard vendor, its just that i cant get them to run on my machine. I am running CentOS 5.5.....On the Sytem>Administration>Hardware (Device Manager) I can see the device listed. I am uploading the files for anyone who needs them. I know i need to run an rpmbuild, but i get errors when i try it..... also, i've tried to run atl1.rpm from ElRepo with no luck, i get an error saying Cannot find a valid baseurl for repo:

View 5 Replies View Related

Debian Installation :: Wheezy To SSD Drive?

Jan 6, 2013

Just re-installed Wheezy to ssd-drive and noticed that everything works much faster than before. For the older install I made some changes to /etc/fstab (I think) which I found from the web. I don't remember exactly what changes.

Question is: what's the situatation with Wheezys beta4-release and ssd-drive? Do I have to edit something at the moment, or does the installer notice ssd-drive and make everything needed?

View 7 Replies View Related

Ubuntu Servers :: PCIe RAID Controller With 4 Intel SSDs?

Jan 12, 2011

I have been thinking about upgrading my RAID setup from a pair of Intel X25s running the software based RAID included with ubuntu to four Intel X25s running off a PCIe based controller. The controller is an HP P400 which I know works great on ubuntu (I have other machines running it with SAS drives). My desktop has an Intel S5000XVNSATAR mainboard and I have an open PCIe v1.0 8x (physical) slot that is wired 4x. The controller is 8x and will fit fine. How much of a performance hit do you think I will see running this 8x controller in the slot wired 4x with four Intel x25s in a RAID 10? Will I have enough bandwidth with the 4x for those SSD's?

View 4 Replies View Related

General :: Better Driver For The Intel 82852/82855 GM Graphics Controller

Feb 4, 2011

I am running Ubuntu 10.10 on my old Acer Travelmate 661 LCi. Device manager tells me: info.linux.driver i915. Is there a better driver, and if yes, where can I get it and how can I install it.

View 1 Replies View Related

Ubuntu Networking :: Error Ethernet Controller Is BROADCOM Corporation Device 1692 ( Rev 01)

Dec 1, 2010

I am not able to configure ubuntu 9.04 on network ,

i get error Network UNCLAIMED. error ethernet controller is BROADCOM Corporation Device 1692 ( rev 01)

View 3 Replies View Related

Ubuntu Networking :: Broadcom B44 Ethernet Controller Not Working After Patching Wlan Driver

May 28, 2011

I patched my wireless driver in order to support packet injection. Using this tutorial:

- Install the Firmware:

Code:

- Create new directory:

Code:

- Now disconnect Internet and unload all your driver (use rmmod command)

- Move/copy the Compat-Wireless patched in /usr/src/drivers directory and unpack the drivers:

Code:

Blacklist the wl driver: (STA driver)

Code:

Currently I'm running Ubuntu 10.10, Kernel 2.5.35-29-generic. I have a Broadcom 4318 for my WLAN and a Broadcom 4401-B0 for my ethernet. I followed the tutorial and I managed to get packet injection working on my WLAN; however, my ethernet connection isn't working. I tried sudo modeprobe b44, but I get the following message:

FATAL: Error inserting b44 (/lib/modules/2.6.35-29-generic/kernel/drivers/net/b44.ko): Invalid argument

View 9 Replies View Related

Hardware :: Setting USB Network Controller (SR9600 USB To Fast Ethernet Adapter) On FC10?

Jun 25, 2009

I've an USB Network Controller product from China with no driver for Linux... It's seem in my FC10 not correctky fuctional... On Windows it worked as SR9600 USB To Fast Ethernet Adapter... here is my log...

Code:

[root@home ~]# dmesg | grep USB
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found

[code].....

View 1 Replies View Related

Networking :: Unable To Find Atheros AR8132 PCI-E Ethernet Controller Driver For CentOS / Fix It?

Jun 26, 2011

I am unable to find Atheros AR8132 PCI-E Ethernet Controller driver for CentOS which is installed on my netbook.

I contacted DELL to provide me the driver and they said that they do not support Linux on netbook and I have to arrange it myself.

I told them that I don't need help in installing I just need the driver file to which they said that they don't have driver for Linux.

NIC is getting detected and works fine on the same netbook (Am dual booting Windows7/CentOS) with Windows7

When I type: ls -l /dev/ it does not show up eth0. Same result with ifconfig. When I type lspci | grep net it does show up something like Atheros Communications AR8132 L1 PCI Gigabit .

View 4 Replies View Related

Debian :: Installation Of The Liquorix Kernel In Wheezy

Jun 15, 2011

I searched the forum about installing the liquorix kernel but I cannot understand why the file /etc/apt/sources.list is not mentioned to invoke the liquorix repository.

Instead, I found: Alternative Performance Kernel for Debian wrote:For anyone interested, just add the following to a sources file (/etc/apt/sources.list.d/liquorix.list): deb [url] or for you scripters, echo "deb [url]

View 2 Replies View Related

Debian Installation :: Overwrite Wheezy With Jessie

Jun 20, 2015

I already have a Notebook with windows (for some reason it needs 3 partitions..) and wheezy. When I installed wheezy I create 2 logical partition inside a primary one: one logical for /home and the other one for filesystem. Now I would like to overwrite wheezy and get get jessie, but without touching windows and home.

I already try to upgrading and it went wrong, so I prefer overwrite, what I have to do during "manual installation" phase?

View 11 Replies View Related

Debian Installation :: Moving From Squeeze To Wheezy?

Apr 2, 2011

I'm wondering I've read in some places that if people would like to move from a stable branch of Debian to the testing you can usually just replace the lines in sources.list with the testing release and update and then dist-upgrade. Is this true...and if so is it safe?

View 1 Replies View Related

Debian Installation :: Upgrade To Wheezy Successful But No CLI And No GUI?

Jun 9, 2011

I upgraded one of my Squeeze installations to Wheezy, but after selecting it in grub, nothing is displayed on screen: no CLI and no GUI. I tried Ctrl + Alt + F[1-7] and I got nothing. My laptop is Acer Aspire 7715Z. I am attributing this to module as there seems to be disk activity, but without a screen, I cannot be certain.

View 14 Replies View Related

Debian :: Nautilus-dropbox Installation On Wheezy

Nov 9, 2014

I added the following line to my sources.list

Code: Select alldeb [URL] ..... wheezy main non-free

and then after:

Code: Select allapt-get update

I run:

Code: Select allapt-get install nautilus-dropbox

but I got stuck (console freeze) and I had to reboot hoping to sort out somehow...

After reboot I try to apt-get again but I got the following message (my traslation)

Code: Select allE: dpkg was interrupted.

It's  necessary to do "sudo dpkg --configure -a" for correcting the problem

So I went in the console again for that command and I get

Code: Select allConfigurazione di nautilus-dropbox (1.4.0-3)...

Dropbox is the easiest way to share and store your files online. [URL] ....

but nothing fruitful seems to happen; and now how to proceed?

View 11 Replies View Related

OpenSUSE Install :: Unable To Use Core I3 Intel Clarkdale Graphic Controller

May 22, 2010

I own a MB with H55 Chipset and a Core i3 540 with openSuse 11.2.I tried kernel 2.6.32 and 2.6.34 and the newest Xorg delete the xorg.conf and got a fine picture on the screen (same with xorg.conf and device "intel") Even HD MKV is possible. But in KDE I can only open one programm. If I try to open a second programm the desktop disappear and I get the KDM screen and have to login again and the former started programm is gone. Only if I start the programms via an open Terminal window the programms will run. I tried to delete all .kde(x) directories, but it�s the same after restart.Only if I use driver "fbdev" in the xorg.conf I get no problem. But then the screen is very slow.

Code:

hwinfo --gfx
09: PCI 02.0: 0300 VGA compatible controller (VGA)
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_8086_42

[code].....

View 7 Replies View Related

Debian Installation :: Won't Recognize HDD - NO SAS Controller

Aug 2, 2010

Recently we bought a server machine in purpose of hosting game servers.Debian is the optimal choice for us but we have a huge problem.We have 2 x HDD Fujitsu MBA3300RC, 300GB, 15000rpm, 16MB [MBA3300RC] , but NO SAS-controller , so standard Debian DVD1 didn't recognized our HDD's during installation.Is there any way to install Debian on our machine without haveing to buy a SAS-controller? answer in "step-by-step" method, i am not very experimentated in linux.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved