Debian Installation :: SEFI Boot After Install

May 19, 2015

Another update

/boot/efi/EFI/debian looks like; grubx64.efi initrd.img-3.16.0-4-amd64 vmlinuz-3.16.0-4-amd64
I tried the following
Code: Select all# efibootmgr -c -g -L "Debian (EFI stub)" -l 'EFIdebiangrubx64.efi' -u 'root=UUID=$UUID ro quiet rootfstype=ext4 add_efi_memmap initrd=EFIdebianinitrd.img-3.16.0-4-amd-64'
efibootmgr: Could not set variable Boot0005: No such file or directory
efibootmgr: Could not prepare boot variable: No such file or directory

When I start the computer with the "Refind media" it gives me 3 options where the first is"Boot EFIdebiangrubx64.efi from 510 Mib Fat Volume" If I choose this option it takes me to grub via eufi(?) and then I can get into my computer as usual.How can I make my computer understand that it should recognize and boot from EFIdebiangrubx64.efi, 510 Mib Fat Volume?

The installation of the latest stable on my Lenovo G505s went just fine in UEFI mode but when the installation finished I never reach grub during the bootup process. I put Refind media onto a usb stick and boot into my computer using it after that I tried to follow this guide URL...

Code: Select all[ -d /sys/firmware/efi ] && echo "EFI boot on HDD" || echo "Legacy boot on HDD" EFI boot on HDD and Code: Select all apt-get install --reinstall grub-efi went just fine and I have /dev/sda1 mounted on /boot/efi but when I try grub-install I get

Code: Select allgrub-install /dev/sda
Installing for x86_64-efi platform.
efibootmgr: Could not set variable Boot0005: No such file or directory
efibootmgr: Could not prepare boot variable: No such file or directory
Installation finished. No error reported.

[Code].....

View 2 Replies


ADVERTISEMENT

Debian Installation :: Debian 5.0.4 New Install Will Not Read Boot Disk Info

Mar 10, 2010

I down loaded Debian 5.0.4 and burned it to CD (several times I might add till it was right) and now the computer I'm putting it on wont acknowledge it as a boot disk and load. It does not have a problem with my windows cd, which has a crack and the start of all my problems, But not the Debian CD-1 disk. what now? The computer is an IBM thinkpad a22p. Everything works as far as I can tell. But I was going to reinstall Windows and failed in that because of a small crack on the edge of the disk that stopped the install and any hope of accessing the file on the laptop. Microsoft does not support windows xp any longer, you must buy windows 7, but the ibm will not run it due to processor speed and ram limitations. But it will run linux and I'm willing to try it just to get out of microsoft control.

Idon't know what else to do. This is the link to where I downloaded the software ( [URL] ). The others five that i downloaded were on the same page that I got this one. Are there bad files here? Is there a missing file in the disc?

View 4 Replies View Related

Debian Installation :: Install XP Dual Boot On 7.8 Box

Mar 6, 2015

Is it possible to install Windows XP on a machine that already has Debian 7.8? I find lots of articles on installing Debian after but not before XP.

I would like to get a prompt at startup to select Windows XP or Debian 7.8 and then choose which one I want. The reason I want to do that is because I have Guitar Pro on XP and cant find anything as good and also I want to watch Netflix and cant seem to be able to find a way to do that on Debian 7.8 except windows emulator which defeats the point of Debian anyway. Also my Epson V500 will not work on Debian 7.1 and I have tried everything, been to Epson, installed drivers etc..

View 3 Replies View Related

Debian Installation :: Can I Only Boot In With Gujin After Sid Install

Sep 30, 2010

I net-installed Sid with unetbootin. Nothing special, I used the whole drive for the partition, no customization, said yes to grub and the mbr, and rebooted after I was told to.

Nothing but a blank blinking cursor after the BIOS readings. really nothing. I assume this means that something is not beginning grub. I'm pretty naive with booting, so that's all I really understand.

I put Gujin on a thumbdrive, and that enables me to boot into the system, and all works fine from there. It's just that I have no idea how to fix it so that I don't need to use my gujin thumbdrive every time. I figure it has something do with grub and chroot, but I really have no idea.

View 3 Replies View Related

Debian Installation :: Won't Boot Install Disc

Jul 3, 2011

I am trying to install debian on a compaq presario 6000. When I try to boot off of the first dvd it just won't do anyting most of the time; one flat line keeps blinking. The first time that I booted it, there was that line that starts with isolinux, but that was only there the first time. now nothing shows up.That first time, I got several error messages: EDD: error 8000 reading sector 1360652 and the same thing 5 times over with different numbers at the end. Do these mean that the disc is corrupt in some way, or that the dvd reader is broken or something else?

View 14 Replies View Related

Debian Installation :: Screen Goes Black On First Boot After Install

Aug 22, 2014

I thought I'd breathe some new life into my aging PowerMac G5 desktop computer by installing debian. I burned the CD and ran the installer and everything installed okay, but when I went to boot it up for the first time, the screen blacked out after a few seconds of scrolling text and shows no signs of life after that. The computer just stops sending video to the monitor, and the only thing I can do is shut it down by holding down the power key.

View 13 Replies View Related

Debian Installation :: 8.1.0 Won't Boot From M5a97 Mobo After Install

Sep 27, 2015

I am a real debian noob. I may be too old for this (things have changed a bit since I first started hacking fortran in 1971), but will try one more time.I am editing this original post to clarify: my debian install will not boot to GUI. It will boot to a shell under the advanced option.I have tried loading debian 8.1.0 from DVD. The system will install, but will not boot after the install.On a regular reboot, the last command is fsck. Then it hangs.

On a recovery mode reboot, the last output is:[7.940682] FAT-fs (sdal) utf8 is not a recommended IO charset for FAT files (my handwriting is bad - may not be 100%). - then it will hang.The problem may well be the result of UEFI and the m5a97 R2.0 mobo I am using with my amd 8230E processor. I've been doing some research on UEFI and archlinux. It is a bit of a challenge for me.

I've managed to load ubuntu on this drive. I burned a debian 8.2.0 live DVD, but it will hang also. debian live will hang before it gets to a GUI. The debian live will run the GUI desktop environment with the amd64 fail safe option. When I install debian from the live DVD (the 1.4gb DVD, vs the regular 4.0 gb DVD), it will hang before it gets to the GUI.

View 14 Replies View Related

Debian Installation :: Windows 7 Won't Boot After Lenny Install

Apr 9, 2010

I installed lenny and now my windows 7 won't boot. When I select it in Grub the machine just restarts the bios after a few seconds of black screen. The machine I'm using is a very vanilla intel p4.

I'll paste my /boot/grub/menu.lst below. All of the drive options look correct. I properly shutdown Windows 7 before installing lenny. I'm sure I can reinstall the mbr and get my windows back, but I would like to dual boot with grub.

View 9 Replies View Related

Debian Installation :: FAILED To Install BOOT LOADER?

Jul 15, 2010

Here is the message I get every time I try to install Debian Squeeze on my computer: Image at: [URL] I have tried multiple cd's and multiple iso's (and the iso's where all different) and the installation always fails at the same place. Here are my specs: Hardware Overview:

Model Name:Power Mac G5
Model Identifier:PowerMac7,3
Processor Name:PowerPC G5 (3.0)
Processor Speed:2 GHz
Number Of CPUs:2
L2 Cache (per CPU):512 KB
Memory:1.5 GB
Bus Speed:1 GHz
Boot ROM Version:5.2.4f1

View 11 Replies View Related

Debian Installation :: Cannot Boot Into Windows XP After Dual Jessie Install

Sep 4, 2015

I have a Dell laptop (inspiron 1150) which was dual booting Windows XP and Ubuntu 9.04. I have successfully installed Debian Jessie Standard over the Ubuntu. I pre-partitioned using gparted-live to make a separate single partition for the Debian install. Guided partitioning was then carried out by the installer producing separate /, /home, and swap partitions. After installation, the grub menu shows an entry for Debian and Windows XP. I can boot Debian, but not Windows XP. The symptoms are the same as reported in other forums: A terminal is displayed, vanishes and the system reboots defaulting to the Debian boot.

The grub.cfg file for the Jessie system has an other-os entry:

Code: Select allmenuentry "Microsoft Windows XP Home Edition (on /dev/sda2)" {
   set root=(hostdisk//dev/sda, msdos2)
   search --no-floppy --fs-uuid --set=root cc0ce0ab0ce091ae
   drivemap -s (hd0) ${root}
   chainloader +1
}

The original Windows entry for the Ubuntu install was:

Code: Select allmenuentry "Microsoft Windows XP Home Edition (on /dev/sda2)" {
   insmod ntfs
   set root=(hd0,2)
   search --no-floppy --fs-uuid --set cc0ce0ab0ce091ae
   drivemap -s (hd0) ${root}
   chainloader +1
}

The partitions produced by partman look OK (during the pre-partitioning I did not touch sda1, sda2, or sda3):

Code: Select all~ # fdisk -l
Disk /dev/sda: 37.3 GiB, 40007761920 bytes, 78140160 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

[Code] .....

Partition table entries are not in disk order.

The os-prober found XP:

Code: Select all~ # os-prober
/dev/sda2:Microsoft Windows XP Home Edition:Windows:chain

So it seems that everything is in place, but there are perhaps important differences in the grub.cfg files. Are the two "set root" commands equivalent for example?

View 5 Replies View Related

Debian Installation :: Boot Hangs After Successful Fresh Install

Nov 24, 2015

System is hanging during boot after a successful fresh install via netinstall disk. Never makes it to any GUI or prompt. However, it does still respond to CTRL-ALT-DEL (not completely frozen).Default debian installation with one exception - KDE checkbox was checked for installation. Everything else was default, with "use full disk with GRUB" option chosen.The boot process appears to hang during the service starts. It appears that the start job for "Create Static De..." is not actually ever completing. I don't know how to troubleshoot that any further than I have.

This is running on hardware, it is not a virtual machine. 480GB SSD, i7, 16GB of RAM, AMD R9 390 (I dunno if this is the problem, but it seems a likely culprit).There are no other disks attached. I have verified successful memtest completions (0 failures) and hard disk is intact and working fine (I have swapped for another disk, and the same thing happens as well).

My skill level with Linux is relatively low. I have proficiency using it and programming for it, but not much in the way of troubleshooting/ installation/ drivers.

Here is an album of "screenshots" (phone photos) of the boot sequence in debug: URL....I tried booting straight to console by removing "quiet" from boot options and changing to "text", but it does not alter the outcome in any discernible way.

View 6 Replies View Related

Debian Installation :: Boot Freezes After Install On Encrypted Volume

Jan 1, 2016

I just installed Debian Testing on an encrypted partition (using the encryption feature in the installer). Problem is when I boot I enter the passphrase and then Debian starts to load a bit and then it stops and won't move again. During a normal boot the boot stops after : EDAC sbridge : Couldn't find mci handler Then do a recovery mode boot from grub loader so more information is displayed during the boot time and it stops after : [12.513770] fb: switching to nouveaufb from simple it stops there I can't type anything, I can reboot the computer with ctrl+alt+del tho

I was booting just fine in a previous installation on a MBR-partitioned disk (now it's GPT-partitioned). I have to add that during installation I added a second encrypted volume on a HDD (while / is on a SSD) that mounts to /data. When few days ago I installed it on the MBR-partitioned disk it asked me for the /data passphrase pretty fast, now it just seems to boot and asks me only one passphrase until it freezes.

View 1 Replies View Related

Debian Installation :: Boot - Apt-get Install Xorg Doesn't Work

Mar 25, 2010

I recently installed debian on my ibook G4, but when I start up the computer, it doesn't boot into Xorg. When I tried to start Xorg, it says that it is not installed. How would I install it, and how would I start it? When I do the apt-get install xorg, it doesn't work. Right now I'm running ubuntu on it, but I really want just plain debian, as I really dont need all of the bells and whistles that Ubuntu offers. I just need something to do schoolwork on (I'm a highschool sophmore), and I don't want to use OS X for that as I like linux better (specifically debian and ubuntu).

View 1 Replies View Related

Debian Installation :: Install Will Not Boot - Suddenly Stop And The Monitor Goes Off

Jul 1, 2010

I have tried 504 i386 and 505 i386 both downloaded on an Athlon on an Abit board 20Bb hd old Hitachi monitor both load, but do not complete the boot up they suddenly stop and the monitor goes off only the setup is ever displayed the hardware is working, i just had another system on it.

View 5 Replies View Related

Debian Installation :: Install Squeeze On Triple-boot System?

Oct 28, 2010

'rolling' release as redoing install /upgrade every 6 months is getting 'old' My machine is triple boot

Hard drive is 320 GB
Windows 7 - 167 GB
Ubuntu - Maverick - 73 GB
Ubuntu - Natty - testing version - 65 GB

I do not want to screw up my 'grub' as it's been trashed a couple of times recently and had to re-install everything, which went great with install setting up partitions. I am not sure where 'grub' is installed to. I did install Windows 7 first then let installer split hard drive in half to put Ubuntu on then while installing my second Ubuntu, I let installer split the Ubuntu partition in half, hence the 167 GB Windows and the 2 smaller partitions for Ubuntu.I was thinking to maybe let Debian install over my Maverick install. Would that work and not mess up my Grub and cause me to not be able to boot and have to fix the drama?

View 14 Replies View Related

Debian Installation :: Will Not Boot After Install On Areca ARC-1110 RAID

Dec 1, 2010

I performed an install using the 5.0.6 amd64 netinst cd on a dual opteron server with an Areca ARC-1110 4-port SATA hardware RAID card. I have 2 250GB drives set up as RAID 1. The debian install saw it as only one drive, just as it should. Install went smoothly, but on reboot, the system would not load.

I did some research and tried a couple of things with no luck. Like adding a delay in the grub command. It jus sits at loading system for a while then times out and loads busy box. Just to check things out, I booted into an Ubuntu live-cd and mounted the volume. The file system is there and all of the necessary files. How to use one of these cards successfully?

View 2 Replies View Related

Debian Installation :: Dual Boot - Install After Windows Is Already Installed

Jul 29, 2011

how to install Debian after Windows is already installed. Could someone give me a brief guide to begin the process of installing Windows? When I installed Debian I already made a partition for windows (in the same hard disk), I hope I did it right.

View 3 Replies View Related

Debian Installation :: UEFI Won't Find Boot Device After Successful Install

Sep 12, 2014

I installed Debian Jessie (netinst, daily snapshot) on my Acer Aspire V5-123 laptop in the UEFI mode with the secure boot turned off. everything (network, hardware, partitioning, ...) went smoothly to the last step, but after removing the boot media (USB stick) and rebooting, the firmware could not find the boot device ! The only thing I can think of, is that the EFI boot is not set up properly by Debian installer, but I don't know how to fix it.

View 11 Replies View Related

Debian Installation :: New Jessie Install Black Screen On Boot (AMD Video)

May 14, 2015

I installed jessie amd64 lxde to a thumb drive to use with a laptop. Vanilla install using the amd64 lxde live cd. Upon booting the usb system, I am presented with a black screen with blinking cursor. No grub screen, no ability to type any commands and no ability to switch to another terminal. I tried booting into the live cd and I could get into the intro splash screen. Booting to the live system from there would also hang at a black screen.

However, using the kernel parameter "nomodeset" from the splash screen did allow the live system to boot to the desktop. I booted the live system, mounted the usb system and chrooted into it. I edited /etc/default/grub to include "nomodeset" in the GRUB_CMDLINE_LINUX_DEFAULT and GRUB_CMDLINE_LINUX variables and then ran update-grub.

Upon reboot to the usb system the problem still occurred. The video card in question is a amd firepro 5800m which has an lspci line of mobile radeon 5000 series. This card was supported in wheezy and apparently works with the live system.

View 5 Replies View Related

Debian Installation :: Install To Intel Mac Dual Boot Using REFIt Not Loading

Jan 3, 2010

I have installed Debian on my intel iMac, I installed grub first in my root partition and then in the Debian partition. When I boot my Mac, rEFIt brings me to the boot page and shows the Linux drive, but when I choose it, it tries to start up and then gives me the line "Not a bootable drive" and just hangs. How to get this to boot?

View 3 Replies View Related

Debian Installation :: Safe To Install Dual Boot Windows 32bit

Jan 28, 2011

is it safe to install a dual boot windows 32bit and a linux 64bit on the same pc?

View 14 Replies View Related

Debian Installation :: Asus H97-Plus - UEFI (Secure Boot) / Black Screen Install

Aug 29, 2014

I appear to have the exact problem that is currently listed in the 7.6 errata about EFI boot and black screen while trying to install ("Potential issues with UEFI booting on amd64"). The problem is that their workaround is not an option for me. This is a new rig and the motherboard doesn't appear to have any kind of ability to disable secure boot. I also don't know if my problem is exactly what they're thinking when it comes to that entry.

I'm able to get to the Grub install screen where you have the option to install Debian but when I select an option (any option) the screen turns off, back on but is black. All activity in the system stops after a few seconds (3-5 seconds) and that's it, she's done. I've tried all the options to try and disable secure boot but the options listed below are as close as I can get (and apparently should be sufficient).

The CD ISO used was the 7.6 netinst CD. I've also tried the Jessie ISO (Testing) that was downloaded about 2 hours ago. Same results. Unlike the errata which says "intermittent booting problems", my issue is consistently reproduced with no other result no matter what I do.

The rig:
-Asus H97-Plus running revision 2202
-Intel i5-4570
-32GB DDR3-1600
-128GB SSD Drive
-No external video card - using on board only but have tried both VGA and HDMI ports with the same result.

BIOS settings (is it still called BIOS or is it UEFI now?)
-Fast Boot: Disabled
-Launch CSM: Enabled
-Boot Device Control: "Legacy OPROM Only" or "UEFI and Legacy OPROM" (tried both)
-Secure Boot State: Enabled (it's grayed out and I'm unable to change this)
-OS Type: Other OS (supposedly makes it so you can boot non-Windows OS)

The Debian page with the errata: [URL] ...

Look for "Potential issues with UEFI booting on amd64"

The obvious suggestions I've tried:
-tried USB boot & CD boot - same result
-tried altering the grub script to add the ACPI options - no effect

View 1 Replies View Related

Debian Installation :: 2.6.32-5-amd64 Boot Fails - How To Make It Boot

May 27, 2011

My old computer started randomly rebooting so I went out yesterday and bought a new one. It's a standard Intel 64 architecture with 2gb ram etc.The old computer was running Lenny however I'm happy to upgrade, so I just went to the main Debian download site and downloaded:debian-6.0.1a-ia64.netinst.iso (this didn't work, apparently ia64 is for itanium and my machine is definitely not that), so I downloaded: debian-6.0.1a-amd64-netinst.iso, burnt the CD and ran the install. First time through I had a power failure.

Second time through (a complete fresh start - new partition and everything) it went all the way through to completion and reboot.Clicked 'Continue' to reboot and the machine reset as it would normally and the Grub loader started okay, prompted for the "Debian amd64" standard boot image, selected that and the first 6 lines appeared normal, then the messages wizzed by so fast that only superman could read them. Then they stop - here is some of the content...

[3.816673] Kernel panic - not syncing: Attempted to killl init!
Call trace:
get_empty_filp
panic

[code].....

Running it again I get similar stack stuff but it's a different place: [3.541816], [3.427502] And sometimes if I wait for a minute or two it will continue on further but appear to crash again. Hardware details (everything is onboard - no added cards):

G41M-S3
Intel G41 + ICH7 chipsets
CPU: LGA 775 for Intel Core 2 Extreme

[code]......

Is the amd64 the wrong image? Should I try i386? Is it a blip and I should just rerun the entire install again?

View 14 Replies View Related

Debian Installation :: Boot Jessie Without Legacy Boot

Nov 8, 2015

I've been using linux distros on my desktop forever, and got a windows 10 laptop recently. I want to dual-boot debain (jessie), so I installed it and it worked fine. Unfortunately, I have to enable Legacy mode in BIOS to boot into my grub then linux machine. Is there a way I can have my computer boot without legacy boot?

View 2 Replies View Related

Debian Installation :: Installed Dual Boot 6 RC2 / No Boot At All

Apr 17, 2011

Before the installation, I had triple boot of WinXP, Win 7, Ubuntu 10.10. As you can guess, the main boot-loader was grub. The second is Win 7 boot loader, and there it gives the option what to choose, load XP or Win 7.I made a decision to remove Ubuntu and install Debian(you know better than me why I did). So first, I searched a guide how to un-dual-boot. It told me to delete the two partition that Ubuntu use(swap and ext4) and write to MBR the win 7 boot-loader(using EasyBCD), so I delete them and use EeasyBCD. At this stage, I had 2 partitions: NTFS for XP and NTFS for Win 7, and the Win 7 boot-loader(and XP) worked pretty well.I install the latest testing of Debian(6 RC2) from DVD1 using this guide, except I choose to use the graphical installer, ext4(not ext3 as there), install the desktop environment, and choose to install grub(even know it didn't asked me). The swap partition I set is 3 GB because my RAM is 2 GB, even know that ubuntu set it in the past to 2 GB.The installation went pretty well, just when come to grub package, it says that there was an error with installing grub package(it didn't told me what), I had no choice, so I choose to skip over grub/lilo and finish with no boot manager. I was thinking to myself: "So I couldn't install grub, at least I have the Win 7 boot-loader(which contain XP loader), and maybe Win 7 boot-loader will recognize Debian too.". But I end up with no boot at all.It told me than when choose not to install boot-manager that I need to load /vmlinuz and give it the parameter root=/dev/sda4(my deb partition).I think that if I could install grub, I could load all my boots("sudo grub update" right?).How can I fix it?

View 3 Replies View Related

OpenSUSE Install :: 128 Gb Boot Error / Installation Froze At 92% And After The Laptop Wouldn't Boot?

Nov 23, 2010

I tried to install 11.3 on my acer aspire 7530 notebook to have dual boot with xp.

I made 4 partitions: one for xp, and the three for linux were made automatically.Before installation I got the warning that the partition wasn't entirely below 128 gb, I installed anyway to give it a try.

The installation froze at 92% and after the laptop wouldn't boot.

Now I've formatted the hard disk and installed windows on a partition leaving a free un formatted partition of 100 gb.

View 9 Replies View Related

Ubuntu Installation :: Install And Boot From External HD While Still Boot Window Off Internal HD?

Oct 23, 2010

Can Ubuntu install and boot from external HD while still booting windows off internal HD?In an attempt to spread Ubuntu my friend wants to use ubuntu off an external HD and still have windows fully operational on the internal HD. Questions:1) Can Ubuntu install on external HD without tricky mounting methods and if so how doabout it?2) The bois have the capability to boot from usb, will grub work?

View 9 Replies View Related

Ubuntu Installation :: Cannot Install Or Boot 10.10 (dual Boot With Windows 7)

Oct 19, 2010

I am trying to install Ubuntu on a machine that already has Windows 7 on one partition. Obviously I intend to install it on the other free partition. So I downloaded the iso burnt it onto the disk and pop in the disk and the boot the machine. The installation screen comes up I selected the first option (Try Ubuntu without installation), I just see a prompt after a few seconds and then the screen goes blank and nothing happens. Unable to detect a signal, The monitor goes into standby. The same thing happens if I use "install Ubuntu" option as well. I downloaded minimal install version Ubuntu and tried to install with that. since its old school installation, the installation completed without any errors, but when I restart the grub come up and when I select to boot into Ubuntu, I see the same behavior i.e. the screen goes blank and never boots to anything. This is a machine on which I was using 10.4 until yesterday.

View 1 Replies View Related

Ubuntu Installation :: Cannot Boot After Install (11.04, 10.10), Dual Boot?

Jul 9, 2011

I'm having a frustrating time trying to install Ubuntu as a dual boot with Windows 7 on a new Acer Aspire 5750.The initial install proceeded without incident until an error along the lines of "Cannot install GRUB to /dev/sda".I continued without installing GRUB, and attempted to install GRUB from the live CD:Code:sudo mount /dev/sda5 /mntsudo grub-setup -d /mnt/boot/grub /dev/sdaThis installed GRUB, but only linking to my Windows 7 partition (sda2).

View 5 Replies View Related

Debian Installation :: Boot Back Into Debian Hanging Up

Jul 11, 2011

I'm not sure if this is the right spot for this pst or not, first on this forum. I just removed Fedora Core 4 from my system and installed Debian Sarge with the 2.6 kernel. I'm a newbie. The install seemed to go fine, after it was done I actually logged in and looked around some. I then restarted to check to make sure that my boot process went ok and I could still get to windows. Worked fine. Then I tried to boot back into Debian. It hung. I rebooted and tried again. Hung again in the same spot.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved