Debian Hardware :: NVidia Went To Black Screen - How To Install Radeon

Aug 14, 2010

My KT4AV-based PC has burned up two GEForce 6200 cards, so I decided to try an AGP bus Radeon HD 3650.At the same time as the nVidia card went "black screen" (no video at all, not even text) my CMOS battery died.I put in a new CMOS battery and fixed up the CMOS settings as well as I can.I put in an old Trident TVGA96PCI cardnd got as far as terminal mode, but even with the xserver-xorg-video-tridentdriver already n the system, I couldn't get the display manager to run. I gave up on the Trident card becauseold and bought a new Radeon HD 3650 card and changed the display bus from PCI toAGP in the CMOS settings.

The Radeon card now also gets me only to terminal mode.tried coaxing the system by renaming xorg.conf, but that didn't help - rebooting still gets me nowhere,no new xorg.conf file. The renamed one is still configured for the nVidia card. The xserver-xorg-video-radeon driveris also present, as "sudo apt-get install xserver-xorg-video-radeon" tells me it's already the latest version.I'm presently stuck without direct network support, as the ethernet connection hangs the computer during rebootthe message, "ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready." If I unplug the ethernet cablefor starting successfully, when I plug it back in while I'm at the command prompt, I get a message to the effectthat eth0 up and running,"ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready" messageappears again and the sytem again freezes.I have successfully pinged this PC from another on the network, but not while it's hung up at the above-quotedmessage. In that case, it's "unavailable."How do I purge the system of the nVidia stuff and replace it with an approporiate Radeon driver ?

View 4 Replies


ADVERTISEMENT

Debian Installation :: Screen Goes Black - How To Install Actual Nvidia Drivers

Jan 3, 2011

I am using the actual "testing", Debian works in version 5 on my notebook (or at least starts), but I can't use it b/c I have too much new hardware what is already implemented in the testint Version. I already had debian 6 running but that wasn't the good way to do it.

I have an Alienware m17x R1, with a q9000, a nivida mobile 260gtx. I know that the Problem the basic Debian Driver for Nvidia cards is. It is enough if I can use at least the command line of Debian to install an actual Nvidida driver and get the system running. But that's not possible!

I solved it once, with plugging in an External Monitor to my Notebook, but I don't have one at home at the moment and honestly there must be a better way for. How to "let debian 6. use the Notebook Screen"?

View 4 Replies View Related

Debian Installation :: Black / Blank Screen - Nvidia Driver Wouldn't Install

Apr 29, 2011

After installing debian squeeze I tried installing a nvidia driver. I had to type: /etc/init.d/gdm3 stop The nvidia driver wouldn't install because the 'make' command was missing in a path or something. Now I cannot get the GUI anymore. startx gives me a blank screen rebooting the computer gives me a blank screen. I can only boot in recovery mode. but the nic doesnt work so no internet connection.

View 1 Replies View Related

Debian Installation :: Radeon ATI Gives Black Screen, Even With Nonfree-driver?

Jul 15, 2011

The screen goes black while "waiting to populate /dev/"and only by adding acpi=off can I boot into my system, and then I see that I get an error message during boot when "populating /dev/ " that says"fatal error during GPU init", even after I've installed the firmware-linux-nonfree.deb, which is the one for the R300 family, which I'm guessing is the right one, since lspci tells me I have:Radeon IGP 330M/340M/350MI've read the wiki[URL]

View 5 Replies View Related

Fedora :: F14 Black Login Screen After Ati Radeon Driver Install?

Apr 25, 2011

I`m using a N5010 dell laptop with an Ati Radeon mobility 5650, I tried to install the ati drivers on F14 which caused a black login screen and there is no way to open the console and do anything. On top of that I`m using Ubuntus Grub2 so I`m practically stuck.

View 7 Replies View Related

Debian Hardware :: Nvidia Driver Causing Black Screen

Jun 29, 2015

I have a system running a fairly new copy of Stretch. I have an nvidia Geforce 210 (on my desktop)

Code: Select allVGA compatible controller: NVIDIA Corporation GT216 [GeForce 210] (rev a1)

Previously running Squeeze I was using the proprietary driver and never had any issues. Now using the nouveau driver video playback of mp4 files is glitchy and programs like google earth don't operate smoothly. I installed the nvidia driver from the repositories based on this guide, used nvidia-xconfig to generate an xorg.config file. I made sure noeveau was blacklisted and rebooted my machine.

I was greeted with a black screen. So I booted up in recovery mode, used telinit 2 (side note: what happened to /etc/inittab???) to change to a runlevel that doesn't start X, and confirmed that nouveau was, in fact, not loaded. Typed startx and without any errors or warnings the screen went black. ctrl+alt+fN wouldn't bring me back to a terminal, but hitting the power button did shut down X and halt the machine.

I'm not really sure how to go about debugging this as I get no useful output from anything, just a blank screen and that's it.

For the time being I just blacklisted the nvidia driver and let the system boot with nouveau; I'd still like to get the nvidia driver working properly, though. I've always just downloaded the driver right from nvidia and installed it, but I know that isn't the best way to do it. I'd rather not screw up a brand new system, it's so nice and fast with the new SSD.

View 5 Replies View Related

Ubuntu Installation :: Black Screen Boot-up After NVidia Driver Install?

Nov 8, 2010

I realize that many have had the issue of getting a black screen when booting up. I'm posting because I've tried a couple fixes that I read after doing a search and haven't had any luck yet. I have the 64-bit 10.04 installed on my netbook and my issue surfaced after installing the current nVidia accelerated graphics driver. Following the install ubuntu now boots to a black screen and nothing more. 'nomodeset' only allows me to boot ubuntu in low-graphics mode (which I'm in now) and this fix hasn't produced a solution either: [URL]..64&postcount=9 My netbook has nVidia ION2 graphics with an integrated as well as a discreet graphics card (Intel GMA3150 and NVIDIA GT21

View 9 Replies View Related

Ubuntu :: Nvidia Black Screen Afer Install Booting With Nomodeset

Nov 30, 2010

Running ubuntu 10.10, had to use nomodeset to successfully boot from cd into "Try ubuntu without installing" thing and install ubuntu.

Edited grub by adding nomodeset after quiet and splash in order to boot from hard disk, still booting that way as I'm writing. The computer is an All In one Pc called ONETWOPWU44. The graphic card is an NVIDIA g210m.

After booting into hard disk I installed the proprietary driver resulting in an alternate of white then gray then black then an Image with red blue and some other colours on the screen, not sure of the order but they came one after an other, right when the login form should appear, I am then able to login by tipping my password into the form and pressing enter, I now that cause I can hear the sound when the system loads but the above described situation continues.

I had the same result with an older nvdia driver it was 253 something, don't remember exactly. Then I downloaded the 260.19.21 driver from nvdia website and installed it, with this one I only got a black screen. I now have a fresh ubuntu 10.10 copy and would like to be guided in making this work. How do I install the driver corectly or how do I enable nouveau 3d support?

View 8 Replies View Related

Ubuntu :: Black Screen After Install - Running A NVIDIA Quadro NVS 295 Video Card

Jul 28, 2010

I just got done installing Ubuntu on a new harddrive and set it up to dual boot with grub loader. However, when I boot into Ubuntu, the screen goes black. I can however login (blind) by hitting enter and typing password. The login sound goes and it logs in, however, the screen stays black. I am running a NVIDIA Quadro NVS 295 Video Card.

View 9 Replies View Related

OpenSUSE Install :: 11.2 64bit On Dell Latitude E6410 I7 Nvidia VNS 3100M - Get A Black Screen

May 9, 2010

I'm trying to install OpenSuse 11.2 64bit on a new Dell Latitude E6410 notebook. This is the Intel i7 processor with 8 Gb of RAM and Nvidia NVS 3100M graphics. I can boot from my 64bit installer DVD, but once I choose either Live version, to test it out, or just go for Install, after the first selection screen where I can change the default video at the bottom, I just get a black screen, no video.

I can't find any info on installing Suse on this notebook, (I think its only be available for a couple of weeks now). What do I do to get the screen to show me the graphical installer, Or how do I make the KDE Live version run from the 64bit DVD. I also tried the 32bit version DVD, but it wouldn't give graphics either, so it seems like an X issue.

View 9 Replies View Related

Debian Hardware :: Installing Nvidia On Squeeze (GeForce 8400M GT) - Shows Gdm3 Screen With Lot Of Black Pixels

Feb 16, 2011

I recently upgrade from Lenny to Squeeze. My graphic card is nVidia Corporation G86 [GeForce 8400M GT] (rev a1). Using lenny latest drivers from nvidia worked fine. I installed nvidia drivers using Debian packages 195.36.31-6 and latest driver from nvidia site (260.19.36) and also other nvidia drivers. The problem is when I start gdm3 I saw nvidia logo but then when it loads gdm3 it shows gdm3 screen with lot of black pixels and other random pixels and then the screen freezes. And the only thing I can do is restart using [alt]+[sysrq]+b.

View 13 Replies View Related

Hardware :: Radeon HD 6670 (no KMS, Black Screen)?

May 27, 2011

I'm trying to get a brand new Radeon HD 6670 running, using kernel 2.6.39 (CONFIG_DRM_RADEON_KMS=y, CONFIG_DRM_RADEON=y) and gentoo.First off a I tried to run it out of the box, but while booting the screen got black after:

Code:
Loading Turks MICROCODE
Refined TSC clocksource calibration: 2812.324 MHZ

[code]...

View 3 Replies View Related

Ubuntu / Apple :: ATI Radeon HD 2600 Lucid Black Screen?

May 2, 2010

I recently upgraded from 9.10 to 10.04 and was having trouble getting 3D graphics enabled on my ATI card. I am running on an MacPro3,1I read through this guide as I was having errors regarding fglrx so I uninstalled it and as instructed issued the following:

Code:
sudo /usr/share/ati/fglrx-uninstall.sh # (if it exists)
sudo apt-get remove --purge fglrx*

[code]...

View 9 Replies View Related

Slackware :: Black Screen With Radeon Driver (asus X1650xt)?

Jun 19, 2010

i have an asus radeon x1650xt vga, i can use the latest radeon driver in ubuntu 10.04 and also in the newest fedora but in slackware 13.1 i get the same black screen i used to get with older ubuntu, fedora and other distros. i can only use slackware with the vesa driver, what could be the problem...here is my /var/log/Xorg.0.log

Code:
X.Org X Server 1.7.7
Release Date: 2010-05-04

[code]...

View 13 Replies View Related

Fedora :: Frequent Random Momentary Black Screen On 12 With Radeon 3450?

Jan 3, 2010

I am having a frequent (once every 3-4 minute) random momentary black screen and it recovers after 2-3 seconds. I have notice this since the early Fedora 12, but the frequency increases lately.I have turned off the KMS, KDE power management, and screen saver, but it did not help. I have radeon 3450.

View 4 Replies View Related

OpenSUSE Hardware :: Black Screen With Radeon HD 4200 - With All Graphics Drivers?

Jul 17, 2011

I'm using openSUSE 11.4 on a HP Pavilion laptop, and it was working fine until last week or so. A zypper update seems to have upgraded to a package with a nasty bug though: it now boots into a black screen, instead of showing kdm.And the only option after that is to forcefully shut down the machine;ither Ctrl+Alt+F1 nor Ctrl+Backspace nor Ctrl+Alt+Del does anything. Not sure if this means the kernel hangs,or just that X blocks all keyboard input as well.The issue with powering off with the hardware button is that I don't get full log files (especially kdm.log) so it's a bit hard to investigate...I have tried many things, here are the results:

* Default radeon driver + kdm = black screen
* nomodeset + radeonhd driver + kdm = black screen [driver doesn't support HD4200 anyway]
* nomodeset + radeon driver explicitely requested + kdm = black screen

[code]...

View 4 Replies View Related

OpenSUSE :: Dual Monitor - Nvidia Driver With X Screen - Shows A Black Screen

Feb 5, 2011

I have openSUSE 11.3 with an nvidia card connected with two monitors. In the past I used xinerama which was ok, but now I need to have two separate desktops, one on each screen. I set the nvidia driver with x screen, and now one screen works perfect and the other only shows a black screen. When I move the mouse over the black screen, the mouse pointer turns into an X, but moves correctly, which seems to me that the problem is that I need to set the second desktop to that screen. I looked on forums on how to do so, and no luck.

View 1 Replies View Related

Hardware :: Ati Radeon 4350 Black Screen \ When Use The Default It Works Fine Without An Desktop Effects?

Feb 10, 2010

I get a black screen whether I use Ubuntu's driver or ATI's driver, but when I use the default it works fine without an desktop effects. Catalyst installed without any errors.

View 8 Replies View Related

Debian Installation :: Screen Goes Black On First Boot After Install

Aug 22, 2014

I thought I'd breathe some new life into my aging PowerMac G5 desktop computer by installing debian. I burned the CD and ran the installer and everything installed okay, but when I went to boot it up for the first time, the screen blacked out after a few seconds of scrolling text and shows no signs of life after that. The computer just stops sending video to the monitor, and the only thing I can do is shut it down by holding down the power key.

View 13 Replies View Related

Debian Installation :: KDE Install BLACK Screen On Reboot

Mar 8, 2010

I've just put a fresh install of 64 bit Lenny on my new HP server. All went well so I thought to install KDE. On reboot, the screen just goes black.Could I have some helpful suggestions on how to start working out what the problem could be?

View 7 Replies View Related

Debian :: Kernel Panic On New Install - Computer Goes To Black Screen

Feb 27, 2011

I recently installed Debian squeeze on one of my older pcs. I have had this computer for a long time with windows so I know there is no hardware issue. About half an hour after being turned on in Debian the computer goes to a black screen and the num lock caps lock and scroll lock keys flash.

View 1 Replies View Related

Debian Installation :: 8.0 Black Screen When Selecting Install Option

Jul 16, 2015

I got a Lenovo T430s and when I boot up the USB I am presented with different options like

install
install graphical
install 64
install 64 graphical
etc

When I pick one and hit Enter I am presented with a black screen.

View 6 Replies View Related

Debian Installation :: Black Screen Right After Startup Post Install

Feb 23, 2016

I have installed Debian Jessie 8.0.3 64-bit net install on a MSI CX620. Installation went fine but trying to boot it up the first time nothing but a black screen shows up. I've tried:

Holding shift on startup - Nothing

Press down all keys - Not much, only ctrl+alt+delete makes the screen turn off and then on again.

I'm thinking that I had secure boot on which I now after installation see could be a problem, but I didn't think it would be a problem as I could just go into bios and turn it off, but seeing now that I can't even go into bios it may be a problem.

View 2 Replies View Related

Debian Installation :: New Jessie Install Black Screen On Boot (AMD Video)

May 14, 2015

I installed jessie amd64 lxde to a thumb drive to use with a laptop. Vanilla install using the amd64 lxde live cd. Upon booting the usb system, I am presented with a black screen with blinking cursor. No grub screen, no ability to type any commands and no ability to switch to another terminal. I tried booting into the live cd and I could get into the intro splash screen. Booting to the live system from there would also hang at a black screen.

However, using the kernel parameter "nomodeset" from the splash screen did allow the live system to boot to the desktop. I booted the live system, mounted the usb system and chrooted into it. I edited /etc/default/grub to include "nomodeset" in the GRUB_CMDLINE_LINUX_DEFAULT and GRUB_CMDLINE_LINUX variables and then ran update-grub.

Upon reboot to the usb system the problem still occurred. The video card in question is a amd firepro 5800m which has an lspci line of mobile radeon 5000 series. This card was supported in wheezy and apparently works with the live system.

View 5 Replies View Related

Fedora :: Black Screen After Nvidia Update?

Jul 24, 2009

I just did an update of my Fedora 11 machine, and it required a restart. After restart it will not try to boot up or even show a splash screen. The only thing I see is a black screen with a flashing white cursor.Any ideas on what I can check so I can boot up into Linux again.

View 14 Replies View Related

Debian Installation :: Asus H97-Plus - UEFI (Secure Boot) / Black Screen Install

Aug 29, 2014

I appear to have the exact problem that is currently listed in the 7.6 errata about EFI boot and black screen while trying to install ("Potential issues with UEFI booting on amd64"). The problem is that their workaround is not an option for me. This is a new rig and the motherboard doesn't appear to have any kind of ability to disable secure boot. I also don't know if my problem is exactly what they're thinking when it comes to that entry.

I'm able to get to the Grub install screen where you have the option to install Debian but when I select an option (any option) the screen turns off, back on but is black. All activity in the system stops after a few seconds (3-5 seconds) and that's it, she's done. I've tried all the options to try and disable secure boot but the options listed below are as close as I can get (and apparently should be sufficient).

The CD ISO used was the 7.6 netinst CD. I've also tried the Jessie ISO (Testing) that was downloaded about 2 hours ago. Same results. Unlike the errata which says "intermittent booting problems", my issue is consistently reproduced with no other result no matter what I do.

The rig:
-Asus H97-Plus running revision 2202
-Intel i5-4570
-32GB DDR3-1600
-128GB SSD Drive
-No external video card - using on board only but have tried both VGA and HDMI ports with the same result.

BIOS settings (is it still called BIOS or is it UEFI now?)
-Fast Boot: Disabled
-Launch CSM: Enabled
-Boot Device Control: "Legacy OPROM Only" or "UEFI and Legacy OPROM" (tried both)
-Secure Boot State: Enabled (it's grayed out and I'm unable to change this)
-OS Type: Other OS (supposedly makes it so you can boot non-Windows OS)

The Debian page with the errata: [URL] ...

Look for "Potential issues with UEFI booting on amd64"

The obvious suggestions I've tried:
-tried USB boot & CD boot - same result
-tried altering the grub script to add the ACPI options - no effect

View 1 Replies View Related

Fedora :: NVidia Driver Results In Nowhere ( Black Screen )?

Sep 23, 2009

NVidia FX5200: nvidia-glx-173xxx The problem is that, when I install it, upon rebooting, I get a black screen with one blinking underscore at the top left corner. I somehow managed to get into the console and .. there's something wrong with the video card driver ( no way I could catch it into a picture ).

This was the exact reason why my Fedora CD was laying on the corner for months - I remember having this issue earlier as well.

Is there a way to fix it or at least, recover from a broken video card driver ?

View 4 Replies View Related

Ubuntu :: Black Screen After Nvidia Driver 185 Installed?

Jan 25, 2010

After installing Ubuntu and seeing my resolution would only go to 800 x 600, I found this strange. A message popped up about the nVidia drivers I could downlaod that would enable me to do more so I did. I restarted and all was fine. Nice effects, high resolution. However, after going on XP, then going onto Ubuntu, the screen ahs gone black. The white Ubuntu logo can be seen for a while as it loads, but then the monitor goes completely blank as I hear the sound when the log-in screen appears.As I said in my title, it was the 185 driver

View 3 Replies View Related

Ubuntu Installation :: Nvidia Update Causes Black Screen

Feb 11, 2010

I installed Karmic and the resolution was lower than I expected. I went to Admin and Drivers and the system stated I needed to activate the Nvidia driver. I did this and the system asked for a reboot.Now after Grub I get a black screen. I can hear things going on in the background and can even guess when to input my password, but all I see is a black screen.

View 1 Replies View Related

Ubuntu :: Black Screen With Optimus And Nvidia Drivers?

Jul 28, 2010

I have Asus N61jv laptop with optimus, and i use ubuntu 5-6 months, i know that i can't use my nvidia graphic card, today ubuntu offered to install nvidia drivers and I accidentally clicked, after restart i see only black screen, can someone explain me how to get back to a previous state, i found some topic with this solution "except booting to a live cd and disabling gdm.". How can i fix this problem, i have important data on ubuntu?

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved