Debian Hardware :: How To Install Nvidia Driver For Video Card
Feb 18, 2016
I have a video card. But I cannnot install nvidia driver because of some errors.
My video card's info is GeForce GTX760 1.5GB GDDR5.
Code: Select all$nvidia-detect
Detected NVIDIA GPUs:
01:00.0 VGA compatible controller : NVIDIA Corporation Device [10de:118e] (rev a1)
Uh oh. Your card is not supported by any driver version up to 304.125.
A newer driver may add support for your card.
Newer driver releases may be available in backports.
I have managed to work out how to install my NVidia video card driver. I'm just about to tackle getting the microphone aspect of my sound card in my laptop going. If that goes alright I'd like to install the Wacom drivers for my Cintiq 21ux.
I have sound coming out of my sound card, I just need to put some sound through it (for skype conferences)
Do you where I'd be able to find the right drivers or links to tutoials about or similarto my HP Pavilion dv5 1006tx?It's mainly the sound card and Wacom Cintiq 21ux I'm worried about.
i just instaled bt4 on my hdd and i have a problem with instaling drivers... i cant find and install driver for my video card nvidia 8200 integrated on motherboard. exacly i got the problem with changeing video resolution... i have only 640x480 and 800x600, and here is the problem, i cant put it in 1024x768..
I've been trying to install the latest NVIDIA driver for my 7800GS card. dl the driver from NVIDIA. ctrl+alt+F1. stop gdm3, after I hit agree I get an error. The CC version check failed: The compiler used to compile the kernel (gcc4.3) dows not match the current compiler (gcc4.4). The Linux 2.6 kernel module loader rejects kernel module built with a..
I can't figure out how to install the nvidia drivers for my nvidia 8800 GT video card. I've followed some other posts and all the posts seemed either incomplete, or led me down a path of which eventually broke my installation, that I needed to reinstall the entire ubuntu system.Again, it may not have been broken, i just didnt know how to get back in to the gui version of ubuntu, the instructions took me to the console terminal
1.) I've installed the ubuntu 10.10 64bit for i386 in an oracle virtualBox..
2.) downloaded from nvidia.com "NVIDIA-Linux-x86_64-260.19.44.run"
Only about 1.5 weeks into Linux guys so bear with me. I'm trying to uninstall the Nouveau driver and install NVIDIA-Linux-x86-71.86.14-pkg1.run for my old Nvidia TNT2 card. Following these directions I run into a problem in the first step. When I execute the Ctrl+Alt+F1 command and get:
Ubuntu 10.10 splat-desktop tty1 splat-desktop login: if I enter splat which I believe is my username and the correct p/w I get an incorrect login response.
I intend to update my video card to allow the operation of all three of my monitors in a triple monitor configuration. I have a 790i motherboard with Nvidia chips, so I will most likely choose an Nvidia card for the upgrade. As I will need connections for three monitors, I will have to have two cards. It is my intention to have one large screen field spread across all three monitors. I assume the best way of doing this will be to use an SLI Bridge to link the two video cards. Thus the two video cards must be identical.
Question 01: Is this the best way of realizing a triple monitor setup?
While I am upgrading, I desire to also give the system the ability to play Blue-Ray High Def Movie one of the 1920x1200 monitors I will be using.
Question 02: What are the pitfalls of playing BD-Discs on Debian. I know I will be eventually acquiring a BD-Disc player (once the prices come down a bit more), but when shelling out for two video cards, I better think as far ahead as possible and get the two video cards that will do everything I can foresee them needing to do.
Question 03: As all of my monitors have HDMI input ports, I assume that I will need Video cards that have HDMI output ports to play full 1080P movies. Is this a valid assumption?
Question 04: Can anyone recommend a video card that does what I am wanting it to do? (This is to say Two Dual Link DVI connectors and an HDMI connector per video card with standard and high definition video playback capabilities). Keep in mind that I will most likely need to purchase two of them, to the Super Expensive Bleeding Edge cards are probably not going to be a practical option here.
Question 05: Is there a way that I can just play the BD-Discs with full resolution in a window on one of the three monitors I will have connected to the computer without having to go the HDMI route?
I need to install the nvidia driver on a PC that don't have any nvidia card in it.It's on a PXE server with read-only client's / . Those clients have nvidia cards.When this server had a nvidia card in it, i simply chrooted in the exported / , then i could install this driver.
The nouveau driver coming with the free fedora does not even allow to run Gnome 3, so I'd like to install the Nvidia driver. So far I did not succeed as the nouveau kernel module is loaded at an early stage. How can I remove the nouveau driver?
I revived my old desktop (failed psu), and installed debian squeeze using netinst. It has a nvidia geForce 7600GT card. The driver in squeeze does not work very well, so I downloaded nvidia driver-installer. When I run it, it comes back with an error saying the kernel (I assume the nvidia graphics kernel) is compiled with gcc4.3, but the system is using gcc4.4. Using synaptic manager, I installed gcc3.3, but same error.
Next I tried to uninstall gcc4.4 and it gave a warning the system might not be usable. I did not understand it, but I went ahead and uninstalled gcc4.4 and guess what, the system is not usable, and I have to re-install squeeze. Not a big loss, since I do not have much in it. How to install this nvidia driver, specifically, how do I get switch to gcc4.3 from gcc4.3? Also, the squeeze install gave me 2.6.33-trunk-amd64, and 2.6.33-3-amd64. How do I get rid of ...trunk-amd64? Do I just delete it from grub?
I am trying to get my Debian system running. I have an older Dell Precision 490 with two dual core CPUs. It has 16G Ram, an 150G Intel solid state drive, a 230G data drive, and a 600G backup drive. I have two Samsung monitors attached to the NVIDIA Geforce FX 5xx card. I have been using this machine for several years with Etch, then Lenny, running KDE 3.5. I recently needed to upgrade to Squeeze and KDE4 and have had nothing but problems since. I keep having issues with the video drivers, every time I touch anything the drivers seem to upgrade from the legacy 173 to the current 195.
There have been other library compatibility issues as well (gclib) and the machine has not been stable. This morning the system was running very slowly with X running at 100% (from top) and then the entire system froze. After a hard reboot, X did restart. The Xorg.0.log has the following message: "Failed to initialize the NVIDIA kernel module! Please ensure that there is a supported NVIDIA GPU in this system, and that the NVIDIA device files have been created properly..."
I just purchased an Acer Aspire V5-123 notebook with AMD processor and graphic and installed Debian 7.6 (stable) on it. first of all, I had to install a newer (3.14.0.bpo.1-amd64) kernel image to get the ethernet card working. Then, I got problem with Xorg not starting.
Here is the error lines from /var/log/Xorg.0.log:
Code: Select all(EE) VESA(0): V_BIOS address 0x0 out of range ... (EE) Screen(s) found, but none have a usable configuration.
I installed the libgl1-mesa-dri, xserver-xorg-video-ati, and firmware-linux-nonfree packages, as suggested by AtiHowTo from Debian Wiki, but the problem still persists and the last one (firmware-linux-nonfree) actually caused the notebook to freeze on boot. so, I removed it.
I'm a new user of fedora12 and I'm a beginer in Linux, I'll apreciate if someone tell me how to install a driver for my video card (nvidia 9400GT) because when I try desktop effect fedora disply an error "require hardware 3D support" and that tell's me I don't have the appropriate driver.
I am attempting to make a video machine only... which mean I have a Compaq 6435cl and I have installed the latest verion of ubuntu on it. All I want this machine to do is play video from off the net on my LCD HD TV. The video on board was all choppy when going into full screen mode so I put in a 3dfx Voodoo card and the same thing happens. I cannot figure out how to install the drivers for this card in ubuntu so I was wondering if I should by a new video card. Do you have a recomended video card for ubuntu that would push HD video?
I just got done installing Ubuntu on a new harddrive and set it up to dual boot with grub loader. However, when I boot into Ubuntu, the screen goes black. I can however login (blind) by hitting enter and typing password. The login sound goes and it logs in, however, the screen stays black. I am running a NVIDIA Quadro NVS 295 Video Card.
I used commands below to install the driver,but when i executed the last command,it always outputted "no adapter detected",why? video cards ATI HD5650 was indeed insert correctly.Then i restart.unfortunately,i can't come into system.the screen was always flickering.I can't do anything but reinstall Ubuntu.Who can tell me why? thanks (my Ubuntu was installed in VMware workstation)here is commands i used:1.sudo apt-get install build-essential cdbs fakeroot dh-make debhelper debconf libstdc++6 dkms libqtgui4
Using the video card Nvidia 7800GT on an AMD4200, MB T6100, I am unable to install from the iso, as progression is halted by a video mode that is unviewable. (black and white rows). I can get to the "f6" menu, however once I attempt an install it fails. My main goal is to install Mythbuntu, however the problem seems to be with the Unbuntu install drivers.This post worked to get around this on version 6.10, however these instructions no longer work. http://ubuntuforums.org/showthread.php?t=379807
Is there any way to use the newest Nvidia drivers that should work from a new install CD? I do not see a command line option, which would seem to allow me to install and update and setup the distro, THEN add my drivers before I run xconf.
I have spent ages looking at similar problems but not not quite the same. I have installed 11.4/Gnome (x86) and wanted to use my GT430 card. I went here: 'http://en.opensuse.org/SDB:NVIDIA_drivers' and used the 'one click' install for current cards. All went ok until I rebooted and I got a 'gdm: WARNING: GdmDisplay: display lasted 0.846578 seconds' message. I got five of these in succession until the 'gdm: WARNING: GdmLocalDisplayFactory: maximum number of X display failures reached: check X server log for errors' appeared and it popped me down to an init 3 login.
So, I deleted the blacklisting conf file so that I could get back in to Gnome on Nouveau (which I did ok). I then noticed there was no /etc/X11 Xorg.conf file so I ran /usr/lib/nvidia-xconfig to generate one (which it did) - but it made no difference. I am at a loss know after spending 8 hours on this. Any pointers would be greatly appreciated. My machine is still at fresh install state so even if I have to reinstall 11.4 it does not matter.
I'm trying to install the driver for my ATI Radeon X1600 Series video card. I got the driver from the ATI site. Heres the link: [URL]... I'm using 10.04 LTS. I have attached a screenshot of the message I get when I run the installer.
I have an old video card, Nvidia XFX 7800GT, which is now beginning to fail and I need to upgrade. I am not huge a gamer but I do play/buy games on regular basis. Right now I'm playing Eternal Lands on the Linux side. Looking to spend $100-$150 on a new card.I have a Core2Duo Wolfdale 3.0, with 2ghz ram and run Lucid 32bit. Also run windows Vista64Ultimate on dual boot (rarely).
I would love to buy a new ATI 5770 or 5830, ATI budget cards seem to be much better for the buck over budget Nvidia cards, but I'm concerned with ATI drivers and long term with Ubuntu.On the Nvidia side I'm considering the GTS 250. The only advantage I can find is lower power consumption with Nvidia and Ubuntu has always preferred Nvidia over ATI, as far as working drivers go.As Far as Ubuntu and Lucid is concerned, which way is best, ATI or Nvidia? Has anything changed with ATI support, that could make theor cards more compatible now and in the future?
I have installed Open Suse 11.1 on two different machines. One contains an ATI X850 video card, and the other contains an ATI X1950 video card. I updated the ATI drivers on the 850 card and it works like a dream. I updated the ATI drivers on the 1950 card and Suse becomes unusable. System works fine before the update. Before the update I ran it at a resolution of 1280 x 1024. I thought I would lower it to 1024 x 768 to see if that would help, but it does not. I dual boot with WinXP, and card works fine with that setup at 1280 x 1024, so I would suspect this is a specific problem with my Suse setup as opposed to a Motherboard issue.