Debian Hardware :: VPS Will Boot On Initramfs After Faulty Hard Disk

Apr 5, 2014

I am not sure if this is the correct section but it has to do with a faulty HD. So, the datacenter confirmed that the HD needs to be changed. They put it back and asked me when they should replace it. I told them to wait a bit.

Since then, one of the VPS hosted in this server is booting on "initramfs"

This is the screen. [URL] ....

fsck is not working.

View 0 Replies


ADVERTISEMENT

Debian :: OS'es On Second Hard-disk Don't Boot?

Aug 21, 2010

I installed an OS on the second hard-disk/partition3 (/dev/sdb3; OS was FreeBSD). Added the entry and when i boot: nothing. I choose the OS from grub's menu, the list of choices vanishes, the background image stays, and there it hangs. It hangs until i hit: ctrl+alt+backspace. I have thought: to hell with it, and installed Debian/Lenny. Same problem (OH!).

I also installed the boot-loader to the second disk (/dev/sdb), hit F11 after the BIOS-screen and chosen the second hard-disk to boot from: a similar problem. It hangs, and the keyboard is "dead". I am clueless what to check for (i checked the general culprits, but with UUID its all a bit of a mess. I would say it looks good, but wouldn't bet on it) Anyone ever heard of something like that? Without error message its not easy to use the amazing Google. I do a bit of grub-troubleshooting, usually it works, but usually i get error-messages.

I made two threads about it, in case they contain useful info, here they are:
http://www.linuxquestions.org/questions ... sd-827059/
http://forums.freebsd.org/showthread.php?t=17021

View 14 Replies View Related

Hardware :: Adding Second Hard Disk With Windows To Boot With Grub On First Hard Disk

Jul 7, 2009

I have a sata 320 gb with mandriva linux 2009.1 on it.And it is what curently atached to my cpu. It is shown as 'sda' in the partition table.I also have another 40gb hard disk with windows xp installed on it.It is shown as 'hda' in the partition table . Now what i want to do is attach this 40gb hard disk to my pc and configure grub on my 320gb hard disk('sda') so as to boot windows xp(which is residing on the second hard disk,'hda')Can anyone tell me if what im doing is feasible or not? If it is feasible,can anyone suggest me how to get it working. I know i just need to add 2-3 lines to my grub.conf, but dont know what exactly i need to write.

View 3 Replies View Related

Debian Installation :: Get Grub2 To Boot A Live System From Hard Disk

May 8, 2011

I have been frustrated attempting to get Grub2 to boot a Debian Live system from hard disk. Have set aside a 4gb partition /dev/sda1 to contain the Debian Live and some other recovery tools. I actually have them all working from a 4gb USB stick successfully, but getting it to work on my HDD has proved challenging. On USB, I have PartedMagic, Gparted, Grml, and of course my standard 6.01 Squeeze. I have also managed to get the Debian Live booting from that USB stick. Very slick.

However, I can NOT get Debian Live to boot from my HDD; altho all of the others above boot fine. Have tried it two ways - one using an iSO image, which is how it is done on my USB stick. The other attempt is to copy the entire contents of the ISO to a directory.

Here are my directory structures:

debian_live_gnome_squeeze_i386- contains the following: debian-live-6.0.1-i386-gnome-desktop.iso initrd.gz initrd.img vmlinuz which is how it is laid out on my USB stick debian_live - contains the files from the ISO image The error I get is something like "panic unable to find live filesystem" My grub.cfg snippet for the two methods I have tried - the 2nd menuentry is similar to how it works on the USB stick.

menuentry "Debian 6.01 Live (on /dev/sda1)" {
insmod part_msdos
insmod ext2
set root=(hd0,msdos1)

[code]....

Probly don't really need to get it working since PartedMagic can do almost everything I need for recovery and I can use the USB for reinstall or whatever else.

View 8 Replies View Related

Debian Configuration :: Xen Boot Stuck At Initramfs

Dec 16, 2015

Been trying to follow this tutorial [URL] ..... and when I reboot and select the entry with Xen GRUB hangs at loading initial ramdisk ....

View 0 Replies View Related

Ubuntu :: Keep Connect Both Hard-disks / At Start Select From Which Hard-disk To Boot?

Mar 9, 2011

I have two internal harddisk. Harddisk 1 has ubuntu, fedora installed and harddisk 2 has ubuntu installed. I normally connect either one, and use it. How can i always keep connect both harddisks, and at the start, select from which harddisk to boot? Or it's not possible?

View 7 Replies View Related

General :: Distros And Get The Same Message Faulty Hard Drive SATA The Computer Was Running Windows Vista

Jul 22, 2011

I have tried many distros and get the same message faulty hard drive SATA the computer was running Windows Vista just fine. I changed the Bios for SATA to be ATA instead of ACHI..

View 1 Replies View Related

Hardware :: Master Hard Disk Error After Installing Ubuntu 8.10 / Hard Disk Died

Apr 8, 2009

after installing Ubuntu on one WD 500 GB hard disk and after making mistake and pasting wrong code into Terminal:my OTHER WD 500 GB hard disk that was also in the system (I guess it was "hd1") - died.The problem must be, I guess, I typed wrong code: "hd1,1" instead of "hd0,0".)500 GB (NTFS) of data was on that other (non-Ubuntu) hard disk, and now I can not access it anymore. While booting, system gives "Hard Disk Error" warning and stops.One again: I installed Ubuntu od one hard disk and at the end of instalation I pasted wrong code for GRUB, giving address of another hard disk. Now that other hard disk has error and will not work

View 3 Replies View Related

Ubuntu Installation :: Copy Hard Disk Have 10.04 And Ext4 To 1000 Hard Disk?

Sep 23, 2010

I want to copy hard disk have ubuntu 10.04 and ext4 to 1000 hard disk for new 1000

View 2 Replies View Related

General :: Changing GRUB From An External Hard Disk To The Internal Hard Disk?

May 14, 2010

I had a dual boot (windows 7 + debian), both of them installed in my internal hard disk, with the GRUB in it. I have recently installed a second linux distro (mint), but I put it in an external hard disk. Now the GRUB allows me to boot any of the three operating systems, but I need the external disk to do it. It seems that after the mint installation the GRUB is now working from the external disk (if the external disk is not connected, the machine does not boot.) �Is there a way to change the location of the GRUB, to the internal hard disk of my laptop?

View 2 Replies View Related

Hardware :: Check Hard Disk For Errors. Possible Hard Disk Failure?

Jun 21, 2011

I was using Terminal and browsing a directory in my home folder. My "home" directory is located on "/dev/sdb1". When in Terminal I typed "ls" in one of my directories and the output was garbage. The output didn't show the files in the directory. I think it said something like, "input/output error". Unfortunately, I didn't write the exact error down. Instead I rebooted.The hard disk with the problem is:

Code:
$ sudo hdparm -I /dev/sdb
[sudo] password for brian:

[code]...

View 6 Replies View Related

Ubuntu :: Cannot Boot From Hard Disk Or USB

Jun 15, 2011

I have an Acer aspire 1551 notebook Ubuntu worked fine until now. It will not boot. It boots until the music sounds, and the login screen is supposed to appear, then it just locks up. The strange part is that both the installed version and the USB ubuntu live version fail at the same point. I even tried two versions of Ubuntu live on USB. Windows 7 however works fine. I think something must have happened to the hardware That will not load ubuntu,but will load windows About the only thing I did different on my last session was to install wine and then install Textpad in wine.

View 2 Replies View Related

OpenSUSE :: Hard Disk Thrashing, Esp After Boot?

Apr 24, 2011

Acer Travelmate laptop, 1.3GHz Pentium M, 12MB Ram.pensuse 11.4 (upgraded from 11.3)Vanilla install, not running anything special, always startup and shutdown from scratch, never sleepFor several minutes after KDE appears and I open an app (any app, e.g. Chrome) the hard disk is going nuts. WTF is it doing and how do I stop it? Also some programs take years to start, e.g. digicam took TEN minutes the other day even after waiting a while after booting, the disk thrashing the whole time. But in 11.3 it started almost instantly.

View 9 Replies View Related

Ubuntu Installation :: Cannot Boot From Hard Disk

Sep 26, 2010

This afternoon I finally had the time to run this Ubuntu KK CD and load over my old xp/Jaunty J partition. I had previously run the distro. through the CD, without harming my old partition. On doing so the system consistently reported my Toshiba ATA 120 gig hard disk had multiple bad sectors and was failing. As a true end user (who mucks only when necessary with the CLI) I just figured writing over the partition would end the failure. To be sure I ran Memtest8.66 v2.11 from the LiveCD; everything checked out fine. So I installed KK.

Or was I? Why did it still have the "Install ubuntu 9.10 ISO" icon on the left hand side of the screen? How did the CD come to whir when I tried starting apps like Open Office? Something wasn't right. So I rebooted, this time from the HDD. The start up looked predictable - there's that PXE-E361 Media Test Failure on some cable, I've been staring at that since I built the dual partition. But what's this? PXE-MOF: exiting EXE ROM. Huh? Oh and then the letter j..

This is a Toshiba Satellite A105 with a 200 gH 1gig Pentium M. When I boot the liveCD I get this trial environment that works fine. When I try installing from it I can even see that I'm writing over the previous, whole 9.10 partition I created this afternoon. Regardless when I boot from HDD I get that weird letter j..

I've checked on line for boot issues, and the forum too, but so far haven't seen an issue booting from the HDD, especially when the distro. is already loaded. What am I missing here, and how do I install it from a live CD environment?

View 9 Replies View Related

General :: Boot Iso Image From Hard Disk?

May 17, 2010

How to boot an iso image from hard disk. I have created a linux live cd with remastersys. I want to test it. So I want to boot it from my hard disk.

View 3 Replies View Related

General :: Dual Boot PC With Two Hard Disk?

Aug 17, 2010

I am having 2 Hard Disk 1 is having RHEL 5 Installed And 2nd is having Windows XP, now i want to dual boot my PC with the help of this two Hard Disk? Can i Dual Boot with RHEL & Win XP having Installed in 2 different HD? what is the Procedure?

View 4 Replies View Related

Software :: Separate Boot For Each Hard Disk?

Jul 28, 2010

My laptop had 1 hard disk, partitioned as follows:C: (NTFS), on which Windows XP was installed.D: (NTFS), on which I stored my personal data.Recently, I bought a new hard disk, and divided it into two partitions: An NTFS partition (to store personal data), and another partition on which I installed Linux (Debian Lenny).I want my systo act as follows:While booting the system: if I select to boot from the first hard disk, Windows XP loads. Else, if I select to boot from the second hard disk, Linux loads.In other words, I want the MBR of each disk to point at the corresponding OS.

View 7 Replies View Related

Software :: Debian's And Debian Based Distros With Disk Space - Burn Video On Hard Drive

Aug 13, 2010

Debian and debian based distros issue has a issue that has come to make it self aware to me when I was trying to burn a video on my hard drive with braseo and it won't let me burn more than 4.4 gigs to a dvd with 4.7 gigs of free space even a file that is over the 4.4 gig limit by a megabyte with windows i didn't have this problem. One more thing I have 16 gig flash drive and on debian and debian based distros i can only use 13.1 gigs of it but on fedora I can use all 16 gigs.

View 3 Replies View Related

OpenSUSE Install :: Unable To Boot From A Faulty RAID1?

Jul 14, 2010

opensuse 11.2 64 bits installed in a RAID1 software array. Everything worked smooth during installation, the system boots, the mdx partitions are in their places, did the upgrades, configured the way i wanted, booted several times... all ok. Then i wanted to test the RAID and since its RAID1 i just disconnected 1 drive and started the computer. All what i got is

GRUB loading stage 1.5
GRUB loading, please wait...
Error 21

Connect the drive back and the system works ok.

Disconnect the other drive, then i got
GRUB loading stage 1.5
GRUB loading, pleas wait...
(hd1,0)/message: file not found
and a simple boot menu (in character mode) shows up with the 2 options SUSE LINUX and Failsafe -- SUSE LINUX (no version number)

[Code].....

View 2 Replies View Related

Fedora :: Dual Boot - 10 And Opensuse - Both On The Same Hard Disk

Nov 1, 2009

I have installed on my computer Fedora 10, now I want to install opensuse and create a dual boot environment and I want to have them both on the same hard disk. how to carry on with this task?

View 7 Replies View Related

Ubuntu Installation :: Boot Installer From Hard Disk?

Mar 30, 2010

I want to install ubuntu 9.10 DVD, I have the iso image, so i try to boot the installer from hard disk by adding this lines to my menu.lst.

Code:
title Install Ubuntu
kernel (hd0,0)/install-ubuntu/vmlinuz

[code]...

View 9 Replies View Related

Ubuntu :: How To Copy Boot Hard Disk To Usb Stick

May 29, 2011

I'd like to move my existing Ubuntu installation from my hard disk (/dev/sda1) to a USB stick. How do I copy the data from HD to USB? dd is obviously not the right option since the HD is 320GB and the USB stick only 16GB. However, only 3.5GB are used so this makes perfect sense.And it would make my HTPC even more silent |-)

View 1 Replies View Related

Software :: Possible To Boot From Hard Disk Having RAID Partition?

Mar 28, 2010

I wanted to implement raid5 such that one partition is from my laptop's hard disk and others from other hard disks. After making one partition a raid partition, I rebooted the system. The computer stopped mid-way during booting, and brought me to the shell. On typing fsck -p, it told me an unexpected error occured in the partition which I had made for raid. Is there some condition that we cannot boot from a disk containing one of the raid partitions ?

View 1 Replies View Related

General :: Use Hard Disk Image Like A Regular Hard Disk?

Apr 6, 2010

If you have a hard disk image (including partition table, multiple partitions,...), is it possible to let Linux treat it as a regular hard disk?

By "regular hard disk" I mean I would like to have the image show up as, for instance, /dev/hdx and its partitions as /dev/hdx1,...

(I know I can mount one of the partitions in the image using "mount -o loop,offset=x ..." but I don't really like this option.)

View 2 Replies View Related

Debian Installation :: No Boot Disk Has Been Detected Or Disk Has Failed

Nov 3, 2015

I installed Debian on my PC with a Acer Stock motherboard (xc600) with amd64 and after the installation finished it told me to remove my installation media and reboot. After reboot I was returned this message ' ERROR: No boot disk has been detected or the disk has failed.'. I have verified with gparted using mint live OS that I have Debian installed on my system.

I got believes that this may have be caused by a broken grub or I need to configure something I don't know how in BIOS.

I will update the topic later..

My installation media was a USB 2.0 flashdrive with a Debian 8.2 Jessie Installer and 9 different Linux distros. I have installed Debian multiple times before on my laptop and never had this problem so I know how to go through the installation process and set the partitions.

View 3 Replies View Related

Hardware :: Boot Option: Don't Check Additional Faulty IDE Harddrive

Feb 2, 2010

I wanted to read out a friend's windows hard drive, so I took the IDE connection from my CD drive and plugged it into the hard drive.

Now at boot time at the stage where it usually checks all partitions, linux complains about "zero length partition of that harddrive" and then stops giving me an emergency login.

Maybe that hard drive is actually faulty, even though I see all partitions correctly in windows. What can I do to make linux stop checking it? Is there a boot time option?

I suppose later I can manually mount a /dev/sdb or so device. I just have to figure out which

PS: what the easiest way to check which devices/partitions are available to mount?

View 8 Replies View Related

Debian :: Hard Disk Not Getting Detected

Mar 18, 2011

I am trying a network install of debian 6.0 by dumping the contents of a DVD onto my local http server. For some reason the Western Digital 80 GB pata HDD doesn't get detected when I click on 'detect disk', I even tried with a SATA, no luck.

View 7 Replies View Related

Debian :: External Hard Disk For Both MS?

Jan 6, 2010

I have an external hard disk for USB port. I formatted it on MS for NTFS system.working fine on MS. But can not write while on Debian. Permission denied. Want to use for both on Debian & MS.

View 1 Replies View Related

Fedora Installation :: Dual Boot With Windows 7 On Same Hard Disk?

May 25, 2011

Today I decided to give Fedora15 a shot, mainly because of Gnome3, and so decided to install it over my Ubuntu installation. This is my partition scheme:Two NTFS partitions for Windows;

One logical partition, which inside has:
/dev/sda5 for /boot
/dev/sda6 for /

[code]...

View 14 Replies View Related

General :: Can Boot Machine Without Using Hard Disk / If Its Running On PXE Server?

Jul 20, 2011

I have an old unuseable computer at home that became useless after a hard disk failure. I don't want to spend money on buying a new PATA IDE HDD for it, so I was wondering if I can use a PXE boot server on my notebook (using a virtual machine with Linux) and boot a Linux on the old machine with PXE without using Hard Disk. It is possible? Do I will need to make some extra configuration or use some specific enviroment do do this?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved