Debian Hardware :: Installing Canon Printer Drivers To Jessie

Aug 4, 2015

My purpose is to be able to use Canon printers with my debian jessie system (installed via netinst iso).

I have read this wiki page but unfortunately it is a little old. I still have followed/adapted the instructions there but it fails on my system on step 6. I will explain below.

Latest Canon drivers in the official website is v3.10. US version of it can be obtained from here.

When I try to install .deb package in the driver file archive I get following output:

Code: Select allsudo dpkg -i cndrvcups-ufr2-us_3.00-1_amd64.deb
[sudo] password for ert:
Selecting previously unselected package cndrvcups-ufr2-us.
(Reading database ... 155527 files and directories currently installed.)
Preparing to unpack cndrvcups-ufr2-us_3.00-1_amd64.deb ...
Unpacking cndrvcups-ufr2-us (3.00-1) ...

[Code] ....

And the next thing I tried:

Code: Select allsudo apt-get install cndrvcups-common
[sudo] password for ert:
Reading package lists... Done
Building dependency tree       
Reading state information... Done
Package cndrvcups-common is not available, but is referred to by another package.

This may mean that the package is missing, has been obsoleted, or is only available from another source. However the following packages replace it:

  cndrvcups-ufr2-uk cndrvcups-ufr2-us

E: Package 'cndrvcups-common' has no installation candidate

I cannot solve this package error.

View 2 Replies


ADVERTISEMENT

Debian :: Unstable - Upgrade Canon Printer - 'cups' Removed Official Drivers

Jul 1, 2010

I dist-upgraded my Debian unstable and 'cups' removed the official drivers ('cndrvcups-common_2.00-2_i386' and 'cndrvcups ufr2-uk_2.00-2_i386'). Well, now my network Canon i-SENSYS MF4120 multifunctional printer/scanner doesn't work and the drivers can't be installed back

View 11 Replies View Related

OpenSUSE Hardware :: Canon I860 Printer Drivers Not Included In 11.2

Feb 23, 2010

I recently installed openSUSE 11.2 on a computer with a Canon i860 printer attached to it. Previously this computer had Ubuntu 9.10 installed on it. When Ubuntu was installed on it, the computer found and printed on the Canon i860 printer just fine. When I installed openSUSE, the list of Canon drivers did *not* include the Canon i860. Just for giggles I selected Canon BJC 4000.

It prints, but it "misbehaves" - For example, if I want to print a document that says only "Hello world", it will print it, but it prints it about 20 times on one sheet. I figure this insanity is caused by the improper driver I selected. I'm not expert enough to know how to get this printer working. And - why would it work okay in Ubuntu 9.10, but not openSUSE 11.2? Did I do something wrong while installing openSUSE?

View 3 Replies View Related

Ubuntu :: Canon MX700 Network Printer Setup - No Drivers

Jan 25, 2010

Trying to set up my Canon MX700 all-in-one as a printer on my network. N predefined drivers available on 9.10 rel. Tried Pixma mp830 but printer just prints a blank page. Canon of course shows no drivers for Linux.

View 1 Replies View Related

OpenSUSE Hardware :: Cannot Find Drivers - Canon Wireless Printer 5250

Nov 13, 2010

Bought a Canon all-in-one (printer, copier, scanner) today, which prints beautifully on XP & connects to our WiFi without problem. Only downside, is it can't find a driver for Linux. Anyone out there using this printer under Linux, or any pointers to the right driver?

View 3 Replies View Related

SUSE :: Setting Up Canon PIXMA495 Printer - Cannot Find The Proper Drivers

Feb 5, 2011

I need help setting up my canon PIXMA495 printer. I cannot find the proper drivers.

View 1 Replies View Related

General :: Ubuntu Drivers For Canon MX330 Multi Function Printer Scanner?

Apr 27, 2010

I have downloaded successfully the drivers for the printer component of the MX330. The scanner drivers are downloaded,but I am unable to locate the working part of the .sh file so that I can open it. I have the .sh file in text, but do not know how to utilize it

View 1 Replies View Related

Ubuntu :: Installing The Canon Printer Driver?

Jun 21, 2011

i am running T43 Thinkpad box with Ubuntu 11.04. we have a canon network printer model i-SENSYS MF4570dn printer, and i am trying to install the UFR II driver which i downloaded from canon website. the problem i am facing is that when i install the driver with gdebi i receive error message saying: Dependency is not satisfiable: gs-esp.i tried to install ge-eps but it is not part of the repository for 11.04

View 7 Replies View Related

General :: Installing Canon MX-860 Wireless Printer In Xubuntu?

Sep 16, 2010

I've been running Xubuntu 9.04 for the past couple of months but have difficulty installing my Canon MX-860 wireless printer. Everything else works perfectly and connects wirelessly to internet. Since I run a couple of other Win based computers, printing from the Toshiba 1100 laptop hasn't been a problem. It would be an advantage. I tried to install the latest Xubuntu distro on the Toshiba and it installed but could not connect to the wireless Atheros card. Where should I start? get Distro 10.04 working first or try and install the printer with the existing distro?

View 7 Replies View Related

Ubuntu :: Installing Canon Printer Driver - Missing LSB Information

Jun 8, 2010

I am running Lucid 64bit on my laptop and been trying to install a canon printer driver LBP3200 on it. There are some comprehensive tutorials that I have been following and they worked on my desktop. However the last thing I have to do is

Code:
sudo update-rc.d ccpd defaults 50
which gives me the error

Code:
update-rc.d: warning: /etc/init.d/ccpd missing LSB information
update-rc.d: see [URL]
System start/stop links for /etc/init.d/ccpd already exist.

I checked in /etc and I do not have the rc.d dir! I have rc0.d through to rc6.d and rcS.d dir, but no rc.d one. Is this normal? and if so how can I get the correct file to start/stop the ccpd daemon for the printer? At the moment the print command brings up the printer icon for about ten seconds and then it disappears and nothing happens.

View 2 Replies View Related

Red Hat / Fedora :: Installing Proper Drivers For Canon IR3300 MFD

Jan 7, 2011

We are using Red Hat Enterprise AS 3.0. We are not able to configure the proper drivers for Canon iR3300 MFD. If anybody have achieved this, would like to know the procedure for the same.

View 2 Replies View Related

OpenSUSE Hardware :: Installing Intuos2 Tablet And Canon MP620 Printer?

May 7, 2010

Need to install a Wacom Intuos2 tablet. ALso Have a Canon MP620 multi-function printer that YaST does not see. It tells me that it is a bad port. I have pinged it and it is there but YaST won't let me install it.

View 8 Replies View Related

OpenSUSE Hardware :: Canon Pixma Printer Not Working Anymore After Installing 11.3?

Aug 4, 2010

I have a canon pixma mp640. Under opensuse 11.2 64 bit the printer worked (printing and scanning via wifi). I recently reinstalled my system with 11.3 64 bit, and after installing the canon rpms and creating the printer I get the following error in /var/log/cups/error_log:

Code:

Backend returned status 1 (failed)
printer-state-message="Illegal backend: Success"

In opensuse 11.2 I needed to create some links:

Code:

cd /usr/lib64/cups/filter
ln -s ../../../lib/cups/filter/pstocanonij
cd /usr/lib64/cups/backend

[code]....

View 6 Replies View Related

OpenSUSE Hardware :: Canon MP250 Scanner And Printer Drivers / "Error During Device I/O"?

May 20, 2011

I am trying to get Canon MP250 printer and scanner working in OpenSUSE 11.3 and so far I've had limited success. Both components work up to a point, but aren't fully operational.First of all, I installed the drivers from Canon website for both parts of the multifunctional device. Here's the report on the versions (it's localised, but it shouldn't be hard to understand ).

The printer works for the most part. But it fails to set images to greyscale when I request the driver to. There are some guides about that for Ubuntu, but none for openSUSE that I could find. Also, what does the setting "Amount of Extension" in the printer options do?It would also be nice if I could set the printing quality as well. Right now it seems to print everything with the default quality setting, but personally I like using lower print quality since that saves ink and makes it a little faster.

The scanner, however, is hardly usable at all. If I try to use Canon's ScanGear MP to scan, I can hear that it operates the scanner, but the program itself freezes and after a while gives me the "Cannot communicate with scanner" error. On certain settings I can also hear that the scanner itself doesn't complete the scan (the indicator on it also reports an operation in progress, but it never gets completed).If I try to use Acquire images, the native KDE scanner application, I can get it to scan, but only on very specific settings: it must scan it in colour and the resolution must be equal to or over 300 dpi. If I try anything else, the resulting image file is completely blank or I get an "Error during device I/O". And, of course, it can't save PDF files.

View 5 Replies View Related

Debian :: Canon Printer - Lp0 - "Printer Not Connected -- Check Your Connection"

Jul 31, 2011

I have a canon printer which was working so far. After my latest upgrade its giving errors saying "Printer not connected -- Check your connection" Fortunately I had a backup of my root before the upgrade and one difference I see is that on the new system theres no /dev/usb/lp0 which there is on the old one. So how do I make it? Or should I use the /dev/lp0? Note they are different:

[Code].....

So (naturally) when I tried to make a softlink from /dev/usb/lp0 to /dev/lp0 it did not work.

View 10 Replies View Related

Debian Configuration :: Can't Print From A CANON LBP6020 Printer

Aug 4, 2015

I have the printer Canon i-SENSYS LBP6020. I followed the instructions from the site URL....There are no errors, but when I try to print, nothing comes out of the printer.My system is: Debian GNU/Linux 8 (jessie)Here is some debugging information:

Error log while printing from a CANON LBP6020: URL....
Troubleshooting information while printing from CANON LBP6020: URL....

View 3 Replies View Related

Debian :: Using Squeeze And A Canon Pixma IP4600 Printer - Printers Color Isn't True

Oct 29, 2010

Using Squeeze and a Canon Pixma IP4600 Printer. The color on the printed pages used to be true and now it isn't, it still print is color just not the correct colors.I am color deficient or color challenged (what used to be called color blind) which dosen't mean I can't tell the difference between what is on the screen and what is printed It's not the printer as I have tested it with other Linux and a windows system and it's good.

View 2 Replies View Related

General :: Installing Printer Drivers ?

Mar 11, 2011

I have a Xerox printer, Phaser 3160. On the cd that comes with the printer i got a file for linux called "P3160.tar.gz".

Having extracted this file I found the content as listed below:

These are the files in the linux dir,nothing in the other dirs

Below are dirs

As there is no ./configure file, what do i have to do to install the drivers for the printer

I am using Suse 11.3

View 1 Replies View Related

Ubuntu :: 9.10 - Syntax For Installing Printer Drivers?

Mar 12, 2010

I'm reasonably new to Linux and very new to Ubuntu . I've just installed 9.10 as a dual boot on a Windows XP Pro Dell Inspiron 9200. I have a Samsung CLP-315 that I need to configure first as a local printer then as a wireless network printer. I found the software (.bin file) on the Samsung site and downloaded it but that's as far as I got. Can I use any of the GUI package managers or do I need to use Terminal and command line syntax? Here's the real question "what is the syntax for installing software/drivers?"

View 3 Replies View Related

Debian Hardware :: WiFi Printer Is Not Working After Upgrade To Jessie

Sep 22, 2014

A couple of days ago I followed a guide online in order to install Adobe Reader and this guide recommended a specific package that needed the jessie repository, I added it (unaware the jessie was the name of the new distribution on testing) and so I found myself upgrading to Jessie, which is fine since is working quite alright, but since then I can't sent any document to my wi-fi printer.

I had no problem with Wheezy, I installed two printers: one connected to the usb interface and the other one to the wifi (but is actually the same). With Jessie when I try to print something and select the wi-fi one nothing happens. If i try to add a new one I can't since debian doesn't find it and I can't even delete the old "malfunctioning" one.

View 1 Replies View Related

Ubuntu :: Installing Printer Drivers On Multiple Computers?

Dec 5, 2010

I'm a very inexperienced Linux user, just getting started, so bear with me. I was able install the printer drivers for a Brother network laser printer (HL-5370DW) and would like to install the drivers on a few other computers on my small home network. Is there a way to automate this process by pushing them out to the other computers, or should I just manually install them? It wasn't difficult, just wondering if there is a slick way to do this.

View 2 Replies View Related

Debian Multimedia :: Jessie 64-bit Steam Crashing With AMD Fglrx Drivers

Sep 24, 2015

I recently switched over to Debian 8 "Jessie" (64-bit Cinnamon flavor) on my Desktop.

250GB SSD
16 GB DDR3 RAM
i7 4790 Processor
AMD Radeon R9 280X

I have been able to play multiple games on Steam without any issues, however I have downloaded Ark: Survival Evolved and am unable to actually play that game in particular. I can log in and get to a point of choosing a server, but after it actually loads to the game(where it starts rendering graphics), the game crashes to the desktop. Below is the readout of the crash from when I loaded Steam via Terminal.

Code: Select all   
    Signal 11 caught.
    ERROR: ld.so: object '/home/lukasz/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
    ERROR: ld.so: object '/home/lukasz/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
     
[Code] ....

I have noticed that the above (zenity:13343): Gtk-WARNING line in terminal is the point at which the game crashes. It would appear that the steam gameoverlayrenderer.so is a separate issue and may be a common occurence in the background that you just don't see.(?)

Things that I have done thus far:

-Verified that the video card is good
-Tried Open-source graphics drivers
-Currently using the AMD 15.9 Proprietary Drivers directly from AMD with Catalyst Control Center.
-Reinstalled "zenity" to ensure that it was not corrupted.
-Verified which Gtk+ versions that I have installed(see below)

Code: Select all   
    lukasz@Lukasz-Desktop:~$ pkg-config --modversion gtk+-2.0 gtk+-3.0
    2.24.25
    3.14.5

Is there a "default" gtk+ version that I have to alter for it to recognize that I have Gtk+ 3.0 installed, or did I miss something somewhere?

My hypothesis:

-It has something to do with 32-bit/64-bit conflictions(Maybe the game? My steam is 64-bit)
-My graphics card may not be supported by Ark: Survival Evolved yet.
-I am missing some libraries each time I have attempted different video drivers.
-Something with steam did not get installed correctly(I have not attempted to uninstall and reinstall it, however other games function correctly)

View 7 Replies View Related

Debian Hardware :: Brother Label Printer QL 1060N Doesn't Work / Cut Under Jessie

Oct 8, 2015

I am trying to get the QL1060N to print and cut under Jessie.

I used the Ql1060N on wheezy (cups 1.5.3) with the standard Brother driver and the ptouch/foomatic driver of the QL550. They both worked out of the box.

Configuration for Brother QL1060N Driver:
Description:ql1060n
Location:
Driver:Brother QL-1060N CUPS v1.1 (grayscale, 2-sided printing)
Connection:socket://XXX:9100

[Code] ....

On Jessie (cups 1.7.5):
I first tried the standard Brother driver from here: [URL] ....It didn't work at all. When I print, Cups tells me that the job has been completed, even though nothing has been done. Sometimes I also got the error "job canceled, filter failed", but I can't reproduce this error...

The foomatic/ptouch driver for the QL550 prints like it did before, but doesn't cut the lables automatically like it used to in wheezy. (I'm using the same printing file/picture as in wheezy and also the same configuration.)

View 1 Replies View Related

Debian Installation :: Upgrade From Wheezy To Jessie Modify Print Drivers?

Feb 9, 2016

Does upgrade from wheezy to jessie modify print drivers....

View 1 Replies View Related

Debian Hardware :: Can't Get OpenGL To Work On Radeon Free Drivers (Jessie)

Apr 1, 2014

I'm using Debian Jessie. All the firmware packages are properly installed, and so are the radeon free driver packages.

However, Gallium falls back to llvmpipe, which from what I understand is a software rasterizer and not actually hardware rendering.

Everything works fine except some specific things like KDE's cube animation, which says it can't be enabled because it requires OpenGL.

How do I get Debian to run Gallium properly?

I attached some relevant info...

glxinfo | grep -i opengl

View 14 Replies View Related

Debian :: Installing Driver For LaserJet Canon LBP2900 At Squeeze

Apr 23, 2011

Did some one solved the problem how to install Laser Printer Canon LBP2900 at Squeeze? The driver (version 2.20; in the documentation stays that they were tested some of previous versions at Debian 5.04 or like) I found at the Canon's site doesn't wish to be installed at Squeeze, but somehow I succeeded at Ubuntu 10.04 and Ubuntu 10.10...

View 6 Replies View Related

Debian :: Installing Kernel 3.16 On Jessie

May 13, 2015

So, I did the upgrade to Jessie today and everything went fine and I do like the gray look of the Gnome Classic Desktop. Not much change here.

But it is impossible for me to install the 3.16 kernel.

When I try, I get the following error (sry, it's german, but you should get the point):

Code: Select allE: /var/cache/apt/archives/linux-image-3.16.0-4-amd64_3.16.7-ckt9-3~deb8u1_amd64.deb: Extrahierte Daten für »./lib/modules/3.16.0-4-amd64/kernel/drivers/media/rc/winbond-cir.ko« können nicht nach »/lib/modules/3.16.0-4-amd64/kernel/drivers/media/rc/winbond-cir.ko.dpkg-new« kopiert werden: Es konnte nicht geschrieben werden (Auf dem Gerät ist kein Speicherplatz mehr verfügbar)

It basically says, there is not enough space on /lib to copy the modules for the new kernel. (I have about 100M free there.)

df -h says:
Code: Select all/dev/dm-1               322M    209M   97M   69% /
udev                     10M       0   10M    0% /dev
/dev/dm-2               8,3G    5,6G  2,3G   72% /usr
/dev/sda1               228M     28M  188M   13% /boot
/dev/mapper/linux-var   2,8G    577M  2,1G   22% /var
/dev/mapper/linux-tmp   368M     11M  339M    3% /tmp
/dev/mapper/linux-home   58G     55G  628M   99% /home

So, as you can see, there isn't that much space on / at all - don't blame me, blame the Lenny Installer. Personally I can live with the 3.2 kernel but I wonder if there is any possibility to install the never one without a total re-partitioning.

View 3 Replies View Related

Debian :: Installing GNOME2 On 8.0 Jessie

Aug 23, 2015

I want to install the old GNOME(GNOME2) on debian 8.0 how do i do this

View 8 Replies View Related

Debian :: Jessie 8 - Installing NVIDIA Driver

May 15, 2015

I have installed before with ease following the Debian how to. On jessie 8 I have an issue with black screen, probably miss configuration but can't figure what?

View 8 Replies View Related

Debian :: Installing Apache Spark On Jessie

Jul 15, 2015

I want to learn Apache Spark and I wanted to install it on a Debian Jessie pc, but it seems the packages are not in the repository. Should I download it and install it manually?

What is the best choice for the underlying distributed file system. Obviously I need to setup a stack of tools as simple as possible. Any link to tutorials for Spark on Debian, I keep finding stuff for Ubuntu.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved