Debian Hardware :: DVD Player Not Recognized

Aug 10, 2014

I have a couple of Debian operating systems installed, one running Jessie and one Sid. I've installed Virtualbox on both, and neither one can recoginize the DVD player, using either Virtualbox or K3b or Brasero.

when I run wodim -prcap it shows :

Code: Select allDoes read CD-R media
  Does not write CD-R media
  Does read CD-RW media
  Does not write CD-RW media
  Does read DVD-ROM media
  Does read DVD-R media
  Does not write DVD-R media
  Does read DVD-RAM media
  Does not write DVD-RAM media
  Does not support test writing

View 1 Replies


ADVERTISEMENT

OpenSUSE Multimedia :: CD/DVD Player Not Recognized?

May 1, 2010

I've been trying to play audio CDs in the CD/DVD drive on my machine but I can't get ANY CD Player software to recognize the drive. However, data CDs are read just fine. If I want to play a CD, I have to use the burner drive which is readily seen by all the audio CD software (KsCD, Kaffeine, etc.). I've added myself to the audio, video and cdrom groups but to no avail (I kinda knew it was fruitless to begin with but tried it anyway). I'm running 11.2, 64-bit mode and aside from this minor (but maddening) glitch, I've been very impressed with the distro. I don't want to use the burner for spinnin' platters.

View 9 Replies View Related

Ubuntu :: AVI File Not Recognized On Any Player?

Feb 5, 2010

I tried playing a .avi file using VLC player and Movie Player, but neither will read the file. There is no image or sound. I will post the error message shortly.

View 8 Replies View Related

Software :: K3b: CD Burner/DVD Player Not Recognized At All?

Feb 22, 2011

I had no trouble using k3b in my aptosid box-- 'til today. Some package I upgraded must have altered some config because now k3b doesn't even recognize my CD-burner/DVD player. I used apt-get purge to get rid of k3b and apt-get install to re-install k3b. I rebooted but no luck.hen all worked just fine before this problem, my CD-burner/DVD player drive was known as /dev/cdromInfo on my k3b: Version 2.0.2Using KDE velopment Platform 4.4.5 (KDE 4.4.5)y kernel and OS: Host/Kernel/OS "aptosidbox" running Linux 2.6.35-7.slh.1-aptosid-686 i686 [ aptosid 2010-02- kde-lite - (201009132215) ]What do I edit to get k3b to see my CD-burner/DVD player?

View 3 Replies View Related

Debian Hardware :: HDD Not Recognized In BIOS But Recognized Upon Boot

Sep 18, 2014

I have a backup HDD with a different distro for my laptop and i can boot into it via external usb or if swapped into the laptop. This HDD/install in question is debian testing and was working fine, the issue arose suddenly. I was first suspecting a failure of hardware somewhere on the motherboard, but the hdd i was using with an external usb adapter also works when installed into the machine. also, the HDD is recognized once i have booted using the external HDD and distro, but it is not recognized by the bios. so i dunno, my first guess is something became corrupt within the testing install, but i guess its also possible that there is some wrong with the HDD but thats not immediately apparent as all the data is still accessible.

Should also note that the HDD with testing on it is also recognized when connected via the external usb adapter, while booted from alternative distro/HDD.

Also. just tried this, but i can get the testing HDD/disto to boot if connected externally. it was going pretty quick, but there i did catch a line about a corrupt filesystem. any commands to run to see what might be going on?? log files to look at?

View 0 Replies View Related

Ubuntu :: Converted .avi Videos Are Not Recognized On DVD Player

Jul 4, 2010

This is my main problem, I have some .mp4 videos and want to play it on a regular DVD player, but when I converted it, using avidemux, the DVD player doesn't even know the video is on the USB drive.

I encoded this videos on .mp4 to save some space, but now I need it on .avi.

View 4 Replies View Related

Ubuntu Multimedia :: Samsung Intensity Only Recognized In MP3 Player

May 28, 2010

I'm currently in the process of seeing if I can finally make the switch to linux from windows. So far everything is good, except for my MP3 Player. I use a Samsung Intensity with a 16gb microsdhc card, connected to my computer through a USB. The problem is that Ubuntu doesn't recognize it. Now rhythmbox will recognize it if I have it set to MTP mode, but you ubuntu itself never mounts it. I need it to mount so I can drag and drop files into specific folders on the card. Otherwise I doubt rhythmbox will know where to put the files. The addition of another person to the linux family depends on it. Since I only want to use windows for certain games and not any more than that.

View 2 Replies View Related

Ubuntu Multimedia :: DeVeDe Disc Not Recognized In Player?

Sep 1, 2011

I created a Video DVD using DeVeDe 3.16.8. I selected some .mkv files, created menus and the program created .iso files which I burned using the Burn Image selection in Brasero 2.30.2. The resultant DVD worked perfectly in my PC under Ubuntu as well as Windows XP. However, when I pop the disc in my standalone DVD player connected to my TV, the player gives a "NO DISC" error - no joy.

View 2 Replies View Related

Debian :: USB Stick Not Recognized?

Jan 19, 2011

Debian GNU/Linux Kernel 2.4.33.7-rt13.2 My PC does not beep when I plug in the USB stick. The stick is formated to vfat. The mount point is established in the fstab. The reply is: "/dev/sda1 is not a valid block device"

View 14 Replies View Related

Debian :: Network Cards Not Recognized?

Aug 10, 2010

I just installed Debian 5.0 onto my laptop (Dell e6410) and it appears to boot and run fine, except that it does not recognize the network card (it did not do so during the installation). It also does not seem to recognize the wireless card.I have an ethernet connection, but running ifconfig displays only the local connection.I have tried adding -nomodeset and -noacpi to the boot menu, but that does not seem to change things

View 9 Replies View Related

Debian Hardware :: USB 3.0 Drives Are Recognized As USB 2.0

Apr 6, 2015

Box is an Intel NUC 5th Gen i5. It has 4 external USB 3.0 ports. It doesn't matter what port I plug the drive into, result is the same. Drives are a WD My Book 4TB. There are 2 of them, currently formatted as ext4, but it was the same deal when they were ntfs.

[URL] ....

I have a fresh installation of Debian 7.8.

It seems to me that I'm not seeing the transfer speeds that I would expect under USB 3.0.

hdparm -t
Code: Select allTiming buffered disk reads:  76 MB in  3.04 seconds =  25.03 MB/sec

lsusb
Code: Select allBus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 8087:8001 Intel Corp.
Bus 001 Device 003: ID 1058:1230 Western Digital Technologies, Inc.

[Code] ....

Is this correct for a USB 3 device?

View 2 Replies View Related

Hardware :: Usb Pen Not Recognized On Debian 5.03 Squeeze?

Oct 29, 2010

Until yesterday, my usb pen worked. Now, nothing. I've seen that my iPod charges only, but it's not recognized as a camera. Today I've update only my system.
this is the out of lsusb:

Code:
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
(Usb pen is linked)

View 6 Replies View Related

Debian Installation :: Wireless Device Is Not Recognized

Feb 25, 2016

I have a 2016 Lenovo (ideapad) 500-15ACZ laptop, and just replaced Windows 10 with Debian 8.3. I can't get Debian 8.3 to recognize the wireless device. The device isn't defective, for it works on Windows 10. The Windows 10 driver is called "WLAN Driver (Atheros, Realtek, Broadcom) 12.0.0.116_ 7.35.295.2_2023.1". Here's the output of "lspci":

00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 1576
00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD] Device 1577
00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 9874 (rev c5)
00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Kabini HDMI/DP Audio

[code]....

View 4 Replies View Related

Debian Installation :: ISO Torrent Not Recognized With ImgBurn?

Dec 21, 2010

This is my saved image file from debian.org cd/netinst: debian-507-i386-netinst.iso.torrent
ImgBurn is not recognizing it: "Invalid or unsupported format."

View 2 Replies View Related

Debian :: Scanner No Longer Recognized After Update

Nov 30, 2015

I am running Wheezy 7.9 32 bit, with the kernel Linux 3.2.0-4-686-pae, and Gnome 3.4.2 on an Intel Pentium CPU G3420 @ 3.2 GHz. I installed a new printer in August, an HP Officejet 7612 all-in-one printer/scanner/copier, and it worked perfectly as both a printer and a scanner first time, despite not being listed on the supported list in SANE. Two weeks ago, I got a general software update notification, and did the update. Now the scanner is not recognised. The printer still works fine as a printer, but when using Simple-scan, I get the error message "No scanners detected. Please check your scanner is connected and powered on". I have had a look round on Google, and all the suggestions made do not work.

I tried the suggestion to add myself to the scanner users list on my PC which made no difference (even though the scanner previously worked without my being added to the scanner users list).

I have deleted the printer and re-installed it using CUPS, but that still has no effect. I tried re-installing HPLIP also to no avail, and I have now lost the toolbox on the drop down menu under <Applications> <Accessories> <HP Toolbox>, as when I click on it, nothing happens.

It would seem that something in the update has messed up Simple-scan. Looking at the dpkg log (is this the right thing to look at?) for the date of the update, I cannot find anything which directly involved SANE, so I think that it might be something else which has affected SANE. How I can find out which update did the damage? I don't normally do anything except accept recommended updates, so I am a bit lost as to what to do.

View 2 Replies View Related

Debian Hardware :: Additional VGA Monitor Not Recognized

Aug 6, 2014

I just installed Jessie in a new Toshiba Satellite C75D-B7260.

This is the ouput of inxi -G:

Code: Select allGraphics:  Card: Advanced Micro Devices [AMD/ATI] Mullins [Radeon APU A4-6000 with R2 Graphics]
           Display Server: X.Org 1.16.0 drivers: fbdev,ati,radeon (unloaded: vesa)
           Resolution: 1600x900@0.00hz
           GLX Renderer: Gallium 0.4 on llvmpipe (LLVM 3.4, 128 bits) GLX Version: 3.0 Mesa 10.2.4

This computer has a VGA connector which is dead, additional monitor does not see any VGA output.

Drivers reported by inxi are installed: fbdev, ati, radeon.

Also some tools for radeon in the repo, like radeontool, etc.

View 0 Replies View Related

Debian Hardware :: Some Keystrokes Not Getting Recognized By System

Mar 4, 2016

I'm using Debian (Stetch at the moment). Since a couple of days i noticed that some keystrokes get not recognized by the system, which is really annoying if i type something. It also happens sometimes that a random key gets pressed. For example if i want to type "Hello world", I get "Helllllllllllllo, world", the system would print the "l" character, for example, as long as i don't press any other key. I have a similar problem with my mouse, sometimes it would just get stuck and would not recognise any movement or key presses for a couple of seconds.

View 2 Replies View Related

Debian Hardware :: Sansa Fuze V2 Not Being Recognized Over USB?

Sep 20, 2010

First some background info:The Sansa Fuze seems to have rather spotty USB performance for Linux users based on what I've been able to find on the internet. I got one brand new a few weeks ago, and it half worked for me. By "half-worked"ean it would show up eventually (maybe after a few seconds delay, or after running lsusb multiple times), and sometimes it would suddenly disconnect (tons of bad block messages in dmesg) and come back a minute or two. In any case it was definitely not the nice reliable behavior one sees from normal USB flash drives, which is what MSC is supposed to be. This went on until I decided to rockbox it.

The installation went well using the RockboxUtility, but the USB recognition seemed (by my impressions, not hard data) to become even more spotty, so I decided to remove Rockbox (using the same utility), and did a manual firmware upgrade to the latest version (by copying the extracted fuzpa.bin to the root of the Fuze filesystem) to get rid of the Rockbox bootloader. Ever since then, the Fuze has stopped being recognized anywhere, although it retains its ability to charge from USB ports. Windows 7 is completely unaware when I plug in the Fuze. In Debian, sometimes I can coax the Fuze itself to show the Connected screen, but the system doesn't realize it and the most I ever see in dmesg are lines about new Sandisk device followed immediately by a line about USB device disconnect.

At this point I don't really know what to do so I am asking for suggestions of any kind.
One idea I had is to redo the firmware upgrade, but the catch is upgrading the firmware requires USB access. Is there a way (maybe using mknod or some kludge) to manually create a /dev/sd? device for me to mount the filesystem? If it matters I use thunar's volume manager handle usb devices. On the Fuze I've always used MSC mode

EDIT: an update
I started a watch 'dmesg | tail' going and then plugged my Fuze in and got the following:
(Note the time delay between the first disconnect line and the unable to enumerate

[code]...

View 2 Replies View Related

Ubuntu :: Sd Card Not Recognized - How To Make It Recognized

Jun 2, 2010

I just installed Ubuntu 11.04. The drive was formatted when I installed so it's 100% Ubuntu. The only major problem I have encountered is that Ubuntu will not recognize my SD cards. I really need to access these cards, all my film footage is on there. I think the internal SD card reader (If such a thing exists) would have been deleted during the installation process. I am a greenthumb to Ubuntu and have never used it before so I am rather stuck...

View 7 Replies View Related

Debian :: How To Install Flash Player 10 For Debian Lenny?

Apr 14, 2010

I have read tons of articles on how but none work. I have edited the source.list file with what they say and I have used all the terminal commands that are becoming very repetitive.

View 11 Replies View Related

Debian :: Xfce Desktop - Mobile Broadband Not Recognized

Sep 21, 2015

Booting debian with xfce desktop (8.2, amd64) using a live cd of iso hybrid. While a wired network can be easily connected using network manager, it fails to recognize the mobile broadband (I am using a USB dongle). The network manager gui disappears after I select `Mobile Broadband'. Moreover, Code: Select allnmcli -p con does not recognize the gsm connection, but Code: Select allnmcli dev status returns that a USB gsm connection is present at ttyUSB3.

View 4 Replies View Related

Debian Configuration :: Touchscreen Clicks Not Recognized Properly

Apr 1, 2014

I've got a problem with touchscreen (NNK Switches 5.7" model: FT-CU04B). It is not supported under Linux, but I managed to get it working with usbtouchscreen module, after some modifications of course. It gets recognized by system now, it is possible to calibrate it correctly through xinput_calibrator but it isn't possible to "left click with it". I know that it's weird so I want to make myself clear - touchscreen recognizes touch - when touching button for example, it reacts with "going down" but when I'm releasing button, it "goes up" again, without action. I've tried mapping left mouse button with xinput set-button map 1 0 0 0 0 0, but without success, buttons remain "unclickable".

lsusb:
Code: Select allBus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

[Code] .....

View 2 Replies View Related

Debian Configuration :: HDD In External Docking Station Is Not Recognized Via USB

Jan 9, 2016

Recently (in 2015) our Debian systems started not to recognize HDDs connected via an external docking station.

On my computer I run: (uname -a)

* Linux violin 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt9-3~deb8u1 (2015-04-24) x86_64 GNU/Linux
* If I connect to a flashdrive to the USB2 port, it is recognized as sd* (messages are also written to dmesg/syslog)
* If I connect the USB3 connector of the external docking station with an 1TB WD SATA docked, to this USB2 port (the external docking station has its own power supply, so I do not expect to have a problem with the current, the drive spins up and is spinning), there is nothing in the dmesg/syslog, and no new items under /dev/sd* or lsusb or similar tools.
* If I connect the same external docking station with the same disk via eSATA on a different computer it is recognized. That computer runs the same debian. If I connect through its USB2 port it does not work either.
* I also tried another docking station and USB cable.

View 7 Replies View Related

Debian Multimedia :: Encrypted DVDs Are Not Recognized Upon Insertion

Jun 21, 2015

I have Debian Jessie installed. When I insert a non-encrypted DVD movie DVD into the drive, a pop-up menu appears asking me what I want to do (e.g. "Open with vlc media player, etc.).

When I insert an encrypted DVD movie DVD into the drive, no pop-up menu appears.

I am able to play the encrypted movie DVD in vlc, and libdvdcss2 is installed. So my question is not about playing the DVD but rather about the failure to automatically detect it.

This behaviour happens in Gnome, Mate, and XFCE. (KDE has a Plasma Device Notifier Widget that is able to detect the encrypted DVD).

My other computer with Debian Wheezy is able to automatically recognize the encrypted DVD.

Here are the relevant lines from /var/log/syslog after the insertion of the encrypted DVD:

Code: Select allJun 21 14:52:04 debian-think-pad kernel: [ 2012.208964] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
Jun 21 14:52:04 debian-think-pad kernel: [ 2012.208972] sr 1:0:0:0: [sr0] 
Jun 21 14:52:04 debian-think-pad kernel: [ 2012.208977] Sense Key : Illegal Request [current]
Jun 21 14:52:04 debian-think-pad kernel: [ 2012.208986] Info fld=0x400

[Code] ....

Here are the relevant lines from /var/log/syslog after the insertion of the non-encrypted DVD:

Code: Select allJun 21 14:55:39 debian-think-pad kernel: [ 2226.518955] UDF-fs: INFO Mounting volume 'Check Please', timestamp 2009/06/02 17:43 (1e5c)
Jun 21 14:55:39 debian-think-pad udisksd[1161]: Mounted /dev/sr0 at /media/daniel/Check Please on behalf of uid 1000
Jun 21 14:55:39 debian-think-pad org.gtk.Private.UDisks2VolumeMonitor[1081]: index_parse.c:191: indx_parse(): error opening /media/daniel/Check Please/BDMV/index.bdmv
Jun 21 14:55:39 debian-think-pad org.gtk.Private.UDisks2VolumeMonitor[1081]: index_parse.c:191: indx_parse(): error opening /media/daniel/Check Please/BDMV/BACKUP/index.bdmv

Whan I run the mount command after inserting the non-encrypted DVD the following line appears in the output:

Code: Select all/dev/sr0 on /media/daniel/Check Please type udf (ro,nosuid,nodev,relatime,uid=1000,gid=1000,umask=77,iocharset=utf8,uhelper=udisks2)

Granted, this issue is not a major problem as I can start vlc and play the DVD. However, it might be useful to some new users to Linux to have the pop-up menu appear. Additionally, it would be interesting to learn why it works in Debian Wheezy and not in Debian Jessie.

View 0 Replies View Related

Debian Hardware :: Touchpad Recognized As PS/2 Generic Mouse

Apr 14, 2014

Debian seems to recognize me touchpad as PS/2 Generic Mouse so tapping works but I don't have touchpad in system preferences and two fingers scrolling doesn't work as well as two fingers zoom. Notebook is Samsung 530u3c. I give you some info about my system down below.

uname -a
Code: Select allLinux debian 3.2.0-4-amd64 #1 SMP Debian 3.2.54-2 x86_64 GNU/Linux

lspciCode: Select all00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)

[Code] .....

View 0 Replies View Related

Debian Hardware :: WiFi Card Not Recognized (Laptop HP 430 G2)

Sep 12, 2014

I'm a brand new user of Debian, and I just bought a (too much?) new laptop, the HP 430 G2. It seems to work great for almost everything, except that I don't have any wifi available.

I tried so many different things (without any success) that it would be hard to resume. But for now, all I have is a new installation (to avoid parasite installations of weird things), and a kernel updated to 3.16. I don't know if it's useful though...

Some information from my system :

Code: Select allbonyhoax@bonybook:~$ sudo ifconfig
[sudo] password for bonyhoax:
eth0      Link encap:Ethernet  HWaddr 14:58:d0:09:72:bd 
          inet adr:130.125.57.144  Bcast:130.125.57.255  Masque:255.255.255.0
          adr inet6: fe80::1658:d0ff:fe09:72bd/64 Scope:Lien
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:27329 errors:0 dropped:0 overruns:0 frame:0
          TX packets:3491 errors:0 dropped:0 overruns:0 carrier:0

[Code] .... 

The first element I notice is that I don't have the line with "Kernel driver in use...". Which seems to indicate that there's a problem with the kernel module (is that right?). But I don't know how to fix it...

The other thing that puzzles me with these last two commands is that according to this page, my wifi card is a Broadcom BCM43142. But it's not the result I get with the lspci command.

Anyway, I'm really lost, I don't know what to do, what to check, what to install. I don't want to go by random, testing all the different solutions I see on the web blindely. This is the reason why I ask it here.

View 7 Replies View Related

Debian Hardware :: Sound Card Is Not Recognized By System

Oct 14, 2014

I've got a problem on my Debian, I've tried installing all the correct alsa packages and all packages that have the word sound or audio description. The problem that is happening here is that when I go into settings and click on sound in Gnome, it appears to have a dummy output and in fact, a few weeks ago, the sound was working properly. Now, I believe, that after an update, the sound card was not recognized. Used the lspci command in root mode, and showed my sound card which is onboard. I'll leave the model below it, because I've tried everything and could not solve anything.

Code: Select allroot@debian:/home/weiller# lspci
00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03)
00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 01)

[code]....

View 1 Replies View Related

Debian Hardware :: Jessie - Three Monitors (2 Work The Other Is Not Recognized)

May 7, 2015

Running Jessie, x64 Intel iCore 7 16 RAM with a properly partitioned drive to the specifications I prefer. Running the KDE Shell. For some reason my third monitor is not detected by Debian Jessie at all. When I run the command to list the monitors lspci | grep VGA I think. Only two monitors are listed, I know the other monitor works. During Grub bootup it even has some startup text running in it.

View 9 Replies View Related

Debian Hardware :: Elantech Touchpad In Jessie Not Recognized

Dec 1, 2015

I have a very weird issue with a Acer chromebook laptop (CB5-571) After fresh install of Jessie I just can't seem to have any trace of the touchpad and by that I mean nothing in dmesg or /proc/bus/input/devices or even /var/log/Xorg.0.log is mentioning anything about any sort of touchpad device.

So being desperate I loaded live Xubuntu 14 and the touchpad worked just fine so after some checks it turned out that Xubuntu is using elan_i2c driver which I can't find anywhere.

Also I've tried loading the psmose module but that made no difference as I guess the HW is just not recognized by the system.

dmesg |grep PS
Code: Select all[    1.069210] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    1.069211] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    1.070064] mousedev: PS/2 mouse device common for all mice

uname -a
Code: Select allLinux localhost 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt11-1+deb8u6 (2015-11-09) x86_64 GNU/Linux

View 14 Replies View Related

Debian Hardware :: VIA VT6415 Paralell ATA (IDE) Controller Not Recognized

Mar 27, 2010

However, I have the problem I can't see any devices on my IDE port in my Asrock P43 mainboard, because the VIA VT6415 IDE controller isn't recognized. I typed an 'lspci -k', and I can clearly see there wasn't loaded any module to handle this VIA PATA controller.

...
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
Kernel driver in use: r8169

[code].....

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved