I can read and write data dvds, but cannot play a regular dvd now. I have libdvdcss installed. I am running Slackware 64 13.37 (just installed).
Code: MPlayer 20101218-4.5.1 (C) 2000-2010 MPlayer Team Playing dvd://. libdvdread: Using libdvdcss version 1.2.10 for DVD access libdvdread: Could not open /dev/dvd with libdvdcss. libdvdread: Can't open /dev/dvd for reading
It can see the drive is there and /dev/sr0 is linked to /dev/dvd and I tried running as root to check if it was a permissions problem but got the same thing.
I have tried lots of different DVDs in the drive, same issue. I even switched out my DVD drive to another old DVD-ROM I had laying around, same thing.
I have one desktop and two laptops. It is strange to find that none of the three systems play VCD, when I use Totem, Totem-xine, Gxine or VLC media player, even with the codecs updated. Worse, each of the three DVD players then act in a loop, seeking the LG DVD-RAM drive endlessly. But the drives otherwise work very well and I also write DVDs and CDs often.I have tested the VCDs in Windows machines with VLC media player, and the VCDs work wonderfully. This is kind of strange. So I thought may be I should report this.
The titles says about everything. CD's are perfectly automounted.WhenI insert a DVD however (I tried various DVDs), absolutely nothing happens, as if I would have inserted nothing or a blank DVD.I already read lots of threads and nothing o help... Here are the outputs of a few commands that might or might not be useful.A line I added myself in fstab which appears completely useless:
Code: /dev/sr0 /media/dvd auto utf8,user,noauto,exec 0 0 Code:
I am trying to get Debian 7.4 to burn 50Gb Blueray disks for backups using K3b. The GUI based program is important.
The reason I am using Linux Kernel 3.12-0.bpo.1-amd64 is that I am running an i7-4770K CPU and the motherboard a Supermicro c7-z87-oce (NO overclocking) and 32G RAM. I have had no other problems since using the backported kernel and turning off the onboard graphics and using an nvidia G210 graphics card.
The Pioneer BDR-209M CD/DVD/Blueray burner reads CDs and DVDs to the extent I am able to install Wheezy, and then use a backported kernel. However, it will not write CD's, DVD's and it won't recognize Blueray disks.
I have spent some time weeding through conflicting information and I wanted to verify there is not a work around. I have downloaded and installed the current version of cdrecord to no avail. I have completely removed everything CD/DVD/Blueray related and reinstalled, also to no avail.
Then I came across this statement from: [URL] ....
In all programs of the fork that send SCSI commands, you may be unable to access any of the CD/DVD/Blu-Ray drives at all if you are on Linux-184.108.40.206 or later. This is due to a missing workaround for the Linux kernel interface change that happened with Linux-220.127.116.11.
I am running Lenny. USB storage devices are painfully slow, if the data to be copied is above 4GB it works on transferring for more than half an hour and then comes up with an error dialog(saying something like file size is too big). The problem exists in both read and write.
I did google a bit and here is the output of lsmod | grep hci ehci_hcd28428 0 uhci_hcd18672 0 usbcore118192 4 usb_storage,ehci_hcd,uhci_hcd
I currently have a debian hpc server unit of 10 p4 computers running under debian lenny in use for serving my home network via pxe. I was wondering if there was anything I could use to allow the same read and write acces that is on my pxe machines on my new palm pre plus. That would save me the hassle of syncing all my documents and movies etc to my phone every day or so.
So basically what I am asking is if I can use the current 5tb nfs raid and mount it some way to a remote ip that I can access fully on my phone without the need for a flash plugin. Btw the phone is homebrew app ready.
I'm new to debian ,I was trying to mount my NTFS partition but I did that only with read permissions I couldn't install ntfs-config(allthough I have ntfs-3g installed).So I want to figure out how to mount my partitions with read/write permissions automatically as the systeme starts ?
The disk writer of HP 550 laptop is able to write CDs, but not DVD-Rs. Wasted 3 DVDs(One each with Brasero and K3B on Fedora 12, and 1 with Brasero on Ubuntu 9.10). Last time, with Ubuntu 9.10 I got the following error log
Checking session consistency (brasero_burn_check_session_consistency brasero-burn.c:1799) BraseroBurnURI called brasero_job_get_action BraseroBurnURI called brasero_job_get_action BraseroBurnURI called brasero_job_set_output_size_for_current_track
I use Ubuntu LTS 10.04 with K3B. It seems impossible to write a multisession DVD. I went under the Misc tab and selected errr, something like "Begin multisession DVD" (french menu) but then, the DVD is not recognized as a multisession. I have less than 700 MB written on 2 Phillips DVDs.
What are the possible problem when Windows access the file from Ubuntu got Read Only even though have a full permission to read, write and execute the file? Ubuntu to Ubuntu accessing the file there is no problem only Windows got a problem.
I'm having trouble with my optical drive (an LG GH22NP20).I can read a data DVD, but when I put in a standard audio CD it does not recognize it.I hear it spinning around in there, but if I check /media/ there are no files listed.?
I did install QLandkartGT and the plugin to use Garmin with it and it looks like it work, but when I do press "Live Log" I get the error message; "Device Link Error. Failed to request real time position. Realtime thread failed. Failed to configure USB: could not set config 1: Operating not permitted".
I also get a similar error when trying to download tracks; "Failed to download tracks. Failed to configure USB: could not set config 1: Operation not premitted".
My guess is that Ubuntu do not allow programs to use the USB port, so my question is how I do allow this program (or all) to use the USB ports.
I bought an 8GB flash drive because my D drive doesn't read DVDs. Anyway, my goal is to install Linux ubuntu and have it be my OS (replacing Windows XP). Last night I went to the Ubuntu homepage and downloaded the Ubuntu desktop edition 32-bit and put it on my flash drive. I followed the instructions on how to open and run it, but I was never asked about whether I want Linux to run side by side with Windows or if I want it to replace Windows. It downloaded the whole program, my computer restarted and then (on a black screen) it asked if I wanted to use Windows XP Home Edition or Linux Ubuntu. It's really frustrating because it took a while to download and install it in the first place AND to top that off, when I tried to use Ubuntu it went to a black screen and at the top said that there was an error. So I uninstalled all the ubuntu program and software and now I have a clean slate and want to try this again. I am a complete n00b. Could someone please walk me through how I can go about downloading (w/ links plz), installing and making ubuntu my ONLY OS on my computer via a flash drive? I'm desperate and I don't want to go through all of that and make the same mistake again!
I can't see any option for recursive directories in nfs in fedora 13.
This is my set-up:
save and exit.
When i mount the directory /media/Data from another Fedora 13 box i don't have read and write permissions for each and every file. The -R recursive option would be handy unfortunately this option is unavailable. The red hat docs have not been helpful in this respect.
The mounted partition is of the ext3 type. With the nfs-3g type i don't have any issue however most of my directories/partitions are of the ext3 type so i need get it sorted.
I changed my user name id number to the same number on all boxes thus giving me write access. There must be a better solution than this.
I just installed Ubuntu 10.04 on my system, and I put in a really old game CD for my really old computer. I cannot run the setup program , however because "it is not executable". I can't change this , because it is read-onlybut I can't chane this either. As I'm new to this, I was wondering .
I have a netbook with Ubuntu 10.10 installed in it,and a Pc with also ubuntu 10.10 in it , but x86_64.
I want to copy some iso files and data from my user home directory on the netbook , to the user home directory of the other pc , using a 8 GB usb formated in ext3 with gparted in my pc.
One iso is a windows 7 one to burn then with K3b , as i need to have windows installed in that box. Also of another iso that i have to burn too (windows 7 recovery disk) , and 3 anti-virus trials for windows.
As the usb is owned by the root (or more properly the mounting point,no?), and i can't use my user to copy data to it i usually do :
Usually , what i use is "sudo nautilus" then go to the place where is the data , copy it , and paste it then in the usb. Then in the other pc i do a chgrp and chown to the iso or file.
But , perhaps this is not the better approach. I have investigated a bit , and i think that i have found a better way , but i have some dudes.
The method is change the owner,group and permissions of the mounting point:
Code: cd /media ls umount /dev/sdb1 sudo mkdir usb
If i do this steps in both computers, with each user,in the netbook i can copy the iso to the usb (as fox can write to the mount point of the usb ), but can the other user in the pc 'mulder' read the iso , so be copied to /home/mulder, and then be able to burn it in k3b with success ?
I suppose that having 766 , it should be able to read it , but would have the own of the file ?
How important is not to only be able to read it , but also own it ?
I suppose if the user ID is the same , wouldn't be any problem ,as each ubuntu would supose that the file is owned by their user.
Perhaps the user name change,but if the ID is the same , the user is the same for ubuntu , not any different, no ?
sudden of all all USB drives and sticks I put into a PC will not mount with read/write permissions (they did before). I can still copy to them, but only when I am root. I am on Maverick I've noticed though that if I run disk utility, then UNMOUNT the partition, Check File System, Mount the partition back, I get read/write access..
Recently i acquired an electroencephalograph (EEG) and started to experiment with it, and i need some way to write or send a couple of Hex numbers to the EEG so it will start working, and then to save the data on text file, or at the very least see the output on the terminal using C or C++, i found some programs around the forums but none seem to work properly and more often than not, The EEG is recognized as /dev/ttyUSB0 has a baud rate of 921600.
I installed SAMBA and SWAT, latest versions. What I want to accomplish is to give Windows users unlimited read/write access to the entire filesystem, eg. (/). Barring that, I'd like to at least be able to configure full access to individual directories.And by "unlimited", I mean being able to edit and delete everything that would be normally accessible only by the root user. I want to grant the Windows users of the shares access as if they were root users.