Debian Hardware :: Brother Label Printer QL 1060N Doesn't Work / Cut Under Jessie

Oct 8, 2015

I am trying to get the QL1060N to print and cut under Jessie.

I used the Ql1060N on wheezy (cups 1.5.3) with the standard Brother driver and the ptouch/foomatic driver of the QL550. They both worked out of the box.

Configuration for Brother QL1060N Driver:
Description:ql1060n
Location:
Driver:Brother QL-1060N CUPS v1.1 (grayscale, 2-sided printing)
Connection:socket://XXX:9100

[Code] ....

On Jessie (cups 1.7.5):
I first tried the standard Brother driver from here: [URL] ....It didn't work at all. When I print, Cups tells me that the job has been completed, even though nothing has been done. Sometimes I also got the error "job canceled, filter failed", but I can't reproduce this error...

The foomatic/ptouch driver for the QL550 prints like it did before, but doesn't cut the lables automatically like it used to in wheezy. (I'm using the same printing file/picture as in wheezy and also the same configuration.)

View 1 Replies


ADVERTISEMENT

Debian Multimedia :: VNC Doesn't Work Well With Many Jessie DEs

Dec 29, 2014

I'm trying out a Jessie install and have noticed VNC doesn't work as well as it used to. I often install a desktop environment on a headless machine, disable *dm, and use vnc4server to create a desktop session if I want to use a GUI. When I try to do the same on Jessie, I run into problems.

Using Gnome, all I get is the generic "Oops something went wrong" error. Looking at .xsession-errors, there are some errors that hint at the problem.

Code: Select allXsession: X session started for ryan at Mon Dec 29 06:07:30 CST 2014
X Error of failed request:  BadValue (integer parameter out of range for operation)
  Major opcode of failed request:  109 (X_ChangeHosts)
  Value in failed request:  0x5
  Serial number of failed request:  6
  Current serial number in output stream:  8

[Code] ....

Some possibly related bugs: [URL] ...

The same thing seems to happen with Cinnamon. Since I doubt a fix for the above issue will make it into Jessie, I tried XFCE. However, that doesn't work correctly either. When running XFCE via VNC something is misreporting the version of xrandr as 1.1 instead of 1.4. Since xfsettingsd appears to want version 1.2+, many things are broken.

This post on the Ubuntu forums suggests the issue might be fixed in xfsettingsd version 4.11: [URL] .....

Is there a better way of getting a remote desktop in Jessie that I'm overlooking?

View 0 Replies View Related

Debian Configuration :: BCM4313 802.11bgn Doesn't Work In Jessie

Mar 27, 2016

Debian configurating, so I try to use wifi adapter, but it doesn't work. I have installed Debian Jessie from netinst CD. To reach perfect speed no options were selected. After I installed xfce4 and xfce4-goodies.I follow some different instructions and no dice. Wicd show me no avalable wifi connections. used Ubuntu 14, Ubuntu 12, etc. and I didn't have any problems with wi-fi connections. Some outputs of comands...

Code: Select allsatyva@meliorD:~$ cat /etc/debian_version
8.3
Code: Select allsatyva@meliorD:~$ lspci | grep 4313
02:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01)

[code]....

View 4 Replies View Related

Debian Multimedia :: Japanese Input In Jessie Doesn't Seem To Work

Jan 19, 2014

I've tried installing both ibus-anthy and ibus-mozc in Jessie but I still cannot input Japanese.

By contrast, In Wheezy, when using anthy for example, I can see ibus preferences icon where I can configure ibus and anthy. This doesn't show up in Jessie.

View 12 Replies View Related

Debian Multimedia :: 8.0 Jessie - Volume And Fn Keys Doesn't Work

Mar 30, 2015

I recently install a Debian 8.0 Jessie on a Laptop Dell latitude E6540 with gnome 3.14+3. But the problem is that it doesn't recongnize my multimedia buttons, I tried some methods but I didn't get results.

Code:
Code: Select all$showkey --scancodes
volume up   -- 0xe0 0x30 0xe0 0xb0
volume down -- 0xe0 0x2e 0xe0 0xae
volume mute -- 0xe0 0x20 0xe0 0xa0

$showkey --keycodes
volume up   -- 115
volume down -- 114
volume mute -- 113

[Code] ....

When I reassinged the keys on Settings>Keyboard>Shortcuts to F7, F8 and F9 it works, but when use the keys volume up, down and mute It doesn't show anything.

The same happens with Fn + Brightness keys, in this case it worked the first time but then stop to work I don't know why..

View 5 Replies View Related

Fedora Hardware :: Brother HL-2030 Printer Does Not Work With F15

Jun 6, 2011

After a fresh installation of F15, my Brother HL-2030 printer does not work anymore (means it worked fine with previous Fedora versions). As usual, I downloaded the proprietary drivers from the Brother home-page [1] and installed them. Then, I configured the driver in my browser ('localhost:631'). The printer was correctly recognised (connection via USB). Printing the test page worked fine, but now, as usual user and as root, too, I am not able to print for example with Abiword, Gedit, Sylpheed and other applications.

Strangely, using Firefox, I am able to print for example the Fedora forum or Distrowatch homepage, or some on-line newspaper articles, but I am not able to print a local HTML page (for example [2]). Furthermore, when trying to print a document in Abiword or Sylpheed, the printer warms up, but it does not print. I've attached '/var/log/cups/error_log' (LogLevel debug). (The 'HL2030' diver was added automatically, and I removed it because it did not find any PPD file. The correct printer is called 'brother_hl-2030'.)

View 5 Replies View Related

Ubuntu :: Cannot Get USB Cabled Printer To Work - Brother Mfc-5449cn With 10.04

Aug 18, 2010

I have read the threads and have downloaded the 4 drivers/files from the brothers site and installed them.. but still can not get my USB cabled printer to work what am I missing I am running Ubuntu 10.04 sounds like brother is not the printer to have in case their is no fix what brands of printers are best for compatibility?

View 1 Replies View Related

Debian Installation :: When Connect The Printer, Doesn't Recognize Printer As The Photosmart B109 Printer For Unknown Reason?

Jan 3, 2011

I've bought a HP Photosmart printer, HP Photosmart wireless e-All-in-One printer - B110a and i've got a problem installing it properly. I'm using Debian 6.0 Squeeze. When i connect the printer, Debian doesn't recognize my printer as the Photosmart B109 printer for unknown reason. When i go to the site of HP and search for a driver, it directs me to this site:I've downloaded that latest hplip file as a .run file and installed it. My printer is recognized proparly, but when i try to print a colored image, it comes out black/white. Something is not crrect. Does anyone recognize this problem with this type HP printer?

View 7 Replies View Related

Debian Hardware :: Compile Driver For Laser Printer Brother HL1110 For AMD64

Mar 31, 2015

I have bought a BrotherHL-1110 laser printer. But there is no driver on my system. I have downloaded source code but don't understand how to compile it. (

It does only exist driver-packages for 32 bits: hl1110cupswrapper-3.0.1-1.i386.deb and hl1110lpr-3.0.1-1.i386.deb)

My system is:
Release 7.8 (wheezy) 64-bit
Kernel Linux 3.2.0-4-amd64
GNOME 3.4.2
AMD Athlon(tm) II X2 245 Processor × 2

The source code contain the following files:
-> pwd
/home/joe/Desktop/BrotherHL-1110/hl1110cupswrapper-GPL_src-3.0.1-1

-> ls -R
.:
brcupsconfig Copying filter PPD

[Code] ....

How do I compile and install it on my computer ? ( Or get the printer working ? )

View 7 Replies View Related

Debian :: Umounting With LABEL=label In Fstab ?

Jan 31, 2010

I'm having trouble umounting partitions.

This is the entry I have in /etc/fstab for backup:

I can mount it ok:

But can't umount it:

View 3 Replies View Related

Debian Hardware :: WiFi Printer Is Not Working After Upgrade To Jessie

Sep 22, 2014

A couple of days ago I followed a guide online in order to install Adobe Reader and this guide recommended a specific package that needed the jessie repository, I added it (unaware the jessie was the name of the new distribution on testing) and so I found myself upgrading to Jessie, which is fine since is working quite alright, but since then I can't sent any document to my wi-fi printer.

I had no problem with Wheezy, I installed two printers: one connected to the usb interface and the other one to the wifi (but is actually the same). With Jessie when I try to print something and select the wi-fi one nothing happens. If i try to add a new one I can't since debian doesn't find it and I can't even delete the old "malfunctioning" one.

View 1 Replies View Related

Debian Hardware :: Installing Canon Printer Drivers To Jessie

Aug 4, 2015

My purpose is to be able to use Canon printers with my debian jessie system (installed via netinst iso).

I have read this wiki page but unfortunately it is a little old. I still have followed/adapted the instructions there but it fails on my system on step 6. I will explain below.

Latest Canon drivers in the official website is v3.10. US version of it can be obtained from here.

When I try to install .deb package in the driver file archive I get following output:

Code: Select allsudo dpkg -i cndrvcups-ufr2-us_3.00-1_amd64.deb
[sudo] password for ert:
Selecting previously unselected package cndrvcups-ufr2-us.
(Reading database ... 155527 files and directories currently installed.)
Preparing to unpack cndrvcups-ufr2-us_3.00-1_amd64.deb ...
Unpacking cndrvcups-ufr2-us (3.00-1) ...

[Code] ....

And the next thing I tried:

Code: Select allsudo apt-get install cndrvcups-common
[sudo] password for ert:
Reading package lists... Done
Building dependency tree       
Reading state information... Done
Package cndrvcups-common is not available, but is referred to by another package.

This may mean that the package is missing, has been obsoleted, or is only available from another source. However the following packages replace it:

  cndrvcups-ufr2-uk cndrvcups-ufr2-us

E: Package 'cndrvcups-common' has no installation candidate

I cannot solve this package error.

View 2 Replies View Related

Debian Hardware :: Brother Mfc-440cn Doesn't Respect Gray Printing Just Color

Jun 9, 2014

I have a mfc-440cn installed and working in Debian wheezy 7.4 (the last one) but I cant fix to it for printing in grey, I was using the pdf default reader and send some pages to printing indicating not to print them in color just greys colors but doesn't respect that order, it prints full color. When I see the conf page for the printer it stills have the configuration I did indicating to print grey but it ignores it and print as it wants (full color). Note that I installed thr mfc according the instructions from the brother support page with no trouble but is just that it only wants to print full color.

View 1 Replies View Related

Debian Hardware :: Using The Squeeze Has Gotten The DCP-8065 Driver From The Brother Website To Work?

Feb 9, 2011

I would like to know if anybody using Squeeze has gotten the DCP-8065 driver from the Brother website to work. I am running x64 and have followed the directions precisely (ia32-libs, etc.) but still no dice. I have been using the ubuntu version (brother-cups-wrapper-laser & its dependencies) and that works fine. I just want to know if anybody has gotten this to work and what they did that may have been different from the directions given.

View 2 Replies View Related

Ubuntu :: Zebra S4M Label Printer And CUPS

Jan 29, 2010

So I have a Zebra S4M label printer that I have managed to get mostly working under CUPS. To make that work, I have the printer upgraded with the latest firmware, CUPS 1.4.1 with its AppArmor profile disabled and the Zebra EPL/ZPL ppd file that's floating about the internet loaded into cups. The printer is connected via USB to the computer, and is set up in cups using ZPL. The computer acts as a print server for other computers, and everything seems to work ok, with one exception. When the printer runs out of paper or runs out of ink ribbon, the printer stops and displays an error on screen, but CUPS never stops. It keeps taking jobs, sends them to the printer and reports that everything is A-OK. It appears at a certain point, the printer's memory gets full and then CUPS sort of hangs.

But it still doesn't display and errors or stop the quque, it just starts this weird behavior where it eats jobs or combines them into one giant job that it just sits on. What I need is for CUPS to know that the printer is out of paper or ribbon and pause the queue until the error status is clear. I know that this printer is communicating its status in some way, as when it's connected to a windows machine, the print queue stops when the paper runs out. How to get CUPS to recognize the printer status so that I'm not losing jobs? I've tried digging through the debug logs but there doesn't seems to be much help there. I do notice that from time to time CUPS says it's discarding "unused printer status changed" and "unused job progress" events but other than that, nothing I see of interest.

View 1 Replies View Related

Ubuntu :: PDF Printer Doesn't Work?

Feb 21, 2010

I have tried all the usual stuff like: apt-get cups-pdf and similar things.

Of course I use the proper way (like sudo, etc.) The point is I can't print PDF files. Have a look at the image:

<snip>

I have also modified to the cups-pdf.conf file and have directed it to /home/{USER}/PDF And yes the aforementioned folder (i.e. PDF) exists at its proper place.

So I think the main problem is "P2POutputStream" error which you can see in the image.

View 2 Replies View Related

Ubuntu Networking :: HP Printer Doesn't Work?

Aug 31, 2010

I am networked to a Windows machine. I can see and open files across the network. I can see and add my HP 6000 printer (it is on the Windows machine). On my Ubuntu machine this printer has a check mark by "Enabled" and "shared" but I cannot set it as default (that option is ghosted) and when I try to print a test page it says "unable to connect to CIFS host" I downloaded the HP Linux setup program. That program cannot locate the networked printer at all.

View 7 Replies View Related

Slackware :: Printer Doesn't Work After Upgrade

Mar 6, 2010

After last Current upgrade my printer stopped working.

View 14 Replies View Related

Debian Multimedia :: Jessie - LXDE Doesn't Shutdown Properly

May 19, 2015

I know the problem has been partly solved in this old thread [URL] .....

Now we have Jessie as stable, yet LXDE doesn't shutdown properly:

On the same computers, Wheezy LXDE shut down very fast

I installed Jessie from the netinstall image.

On a 2007 computer, it's like the old days with a Pentium II running some version of Puppy Linux or Slitaz. The system shuts down after a while but the computer remains on.

On a 2013 laptop, I added the line init=/bin/systemd in the Grub default file as advised on the old thread above. The laptop shuts down after a while, the system first, then the hard disk goes to sleep, then all the leds are off.

If I run the magic command, the computer shutdowns in a breeze, perhaps even quicker than good old Wheezy:

Code: Select all# systemctl poweroff

Now, is this still a systemd bug? Doesn't look like it since the systemctl command works. Is it an LXDE bug? Looks like it in a way - if the LXDE shutdown button enabled the systemctl poweroff command, I suppose the button would work?

Is there a way to make the LXDE shutdown button run the systemctl poweroff command?

I'm glad Wheezy is still with us because I wouldn't install Jessie for newbies — they'd think shutdown (through clicking on a button) is even worse than in Windows.

View 2 Replies View Related

Ubuntu :: Network Printer Doesn't Work After Upgrading To 10.04

Nov 8, 2010

I have recently upgraded to 10.04 and subsequently to 10.10. I have a network printer Lexmark C530dn. Before the upgrade to 10.04 it work OK. After the upgrade i have this problem: When i print something it goes right to completed jobs, without an error and without printing. My user is allowed to print, I checked that.

this is from the access log:
localhost - - [08/Nov/2010:20:38:58 +0100] "POST / HTTP/1.1" 200 253 Create-Printer-Subscription successful-ok
localhost - - [08/Nov/2010:20:39:10 +0100] "POST /printers/Lexmark-C530 HTTP/1.1" 200 205765 Print-Job successful-ok

When i print the self-test page, it prints fine, so I assume the problem's in the system rather than the printer.

View 3 Replies View Related

Hardware :: Hp Printer - Doesn't Work - Says The Print Job Stopped

Dec 12, 2009

I was always able to print with my HP OfficeJet 700 printer in Linux, but all of a sudden when I need to print something important, it doesn't work?! It says the print job stopped. It only printed 1/4 of 1/4 of what I needed to print. It has the correct print settings, etc... but I can't print?! Please help. It was able to print the test page before, but now even that won't print. Even CUPS is having problems connecting to the server. Printing in Windows has the same problem.

View 14 Replies View Related

Hardware :: Slow Printing To PICA Label Printer From RH Enterprise Release 4

Mar 18, 2010

Printing bin label reorts to a PICA 104 stores printer is slow, only prints a label EVERY 5 SECONDS ??? (see log below from /var/log/cups/page_log). Have tried to sus it out but am unable to find what's causing ths. Is this a Linux issue or the printer hardware causing this ?

auslab01 126014 ... [18/Mar/2010:12:40:11 +1100] 1 1 -
auslab01 126015 ... [18/Mar/2010:12:40:16 +1100] 1 1 -
.
auslab01 126017 ... [18/Mar/2010:12:41:44 +1100] 1 1 -

[Code].....

View 1 Replies View Related

Ubuntu :: Cannot Print On Brother DCP 330c Printer

Jan 1, 2010

I am running ubuntu 9.04 and am having trouble printing. My Brother DCP 330c printer is detected however I have to manually chose a printer driver all of which do not work with the printer. I have tried downloading a printer driver from the brother website and tried to install it.

View 2 Replies View Related

Ubuntu :: 64bit Drivers Not Available From Brother (printer)?

Aug 14, 2010

This site has drivers for my new Brother HL-3040CN laser printer ... but it says its the wrong architecture when I try to open the first one with GDebi Package Installer. I'm kind of stuck now ...should I try just plugging the printer into the computer with the network cable and seeing if Ubuntu will automatically take care of drivers? For reference I saw this topic when I googled the issue [URL] This site says 64 bit drivers are available for Ubuntu 9.10, only 32 bit drivers are available for Ubuntu 10.04. I am running 10.04 (64bit) ... should I return the printer?

View 6 Replies View Related

Ubuntu :: 11.04 - Brother MFC 5460CN Printer Not Working

Jul 19, 2011

I had it printing until the last cups upgrade. Brother support thinks it is something to do with the upgrade. We did a reinstall of the printer driver. The printer works on Virtual Box and the scanner works on Ubuntu, but not the printer. What do I need to have the printer work under 11.04?

View 9 Replies View Related

Ubuntu :: Installing A New Brother Printer+scanner?

Jun 16, 2010

About a week ago I installed my first Linux (Ubuntu 10.04). Since then I've been trying to get my printer to work by following some of the instructions on the web.Unfortunately,as a newbie, I can't seem to get it right... The printer is - Brother DCP-135C.

View 4 Replies View Related

Debian Multimedia :: Nvidia-settings Doesn't Save Across Reboots - Jessie 64bit

Dec 12, 2015

I had some issues with nvidia drivers, and removed all of the packages using

Code: Select allrm /etc/X11/xorg.conf and Code: Select allapt-get purge nvidia*

Upon reboot, I was back with nouveau drivers and proceeded to reinstall nvidia drivers according to [URL] .....

Code: Select allapt-get install nvidia-driver
apt-get install nvidia-xconfig
I can then change my refresh rate using
Code: Select allnvidia-settings
but when I hit "Save to X configuration file", I get the following output in terminal:
Code: Select allroot@debian:/home/anon# nvidia-settings
Package xorg-server was not found in the pkg-config search path.
Perhaps you should add the directory containing `xorg-server.pc'
to the PKG_CONFIG_PATH environment variable
No package 'xorg-server' found

As a result, my nvidia preferences aren't saved across reboot.

Here are all of my sources:
Code: Select alldeb [arch=amd64,i386] http://repo.steampowered.com/steam/ precise steam
deb-src [arch=amd64,i386] http://repo.steampowered.com/steam/ precise steam

deb http://ftp.ca.debian.org/debian/ jessie non-free contrib main   
deb-src http://ftp.ca.debian.org/debian/ jessie non-free contrib main 

[Code] ....

System Specs:
Debian GNU/Linux 8 (jessie) 64-bit
Gnome Version 3.14.1
Processor: Intel® Core™ i7-4770K CPU @ 3.50GHz × 8
Graphics: GeForce GTX 780/PCIe/SSE2

View 6 Replies View Related

Debian :: HD 6670 Proprietary Driver Not Work Jessie / KDE

May 8, 2015

Everything was working fine on Deb 7.7 with propriety driver. Then I did what I "presumed" to be an "update" through apper but it upgraded to Deb 8. The upgrade borked half way through with errors (cannot remember what they were, unfortunately I had to go out - wasn't expecting an upgrade or I'd have done it with more time).

Apper stated it had part installed stuff and trying to run update again (through apper) then had "no permissions" issues even though I entered password. After a few reboots and upgrading through recovery I "seem" to have resolved that, but might be related to this issue.

After resolving that issue I booted up and the grey GUI login screen was fine, after entering password the next screen was a colourful splash screen (with "Desktop" tab in top right corner), but it doesn't advance from that screen. No mouse, can't click or tab. Ctrl Alt Del does nothing.

The image looked like this, but with only "Desktop" in a black tab at the top right.

[URL] ....

I've never seen this screen before.

After followed this guide using recovery boot:

[URL] ....

Code: Select allapt-get purge "fglrx.*"
rm /etc/X11/xorg.conf
sudo apt-get install --reinstall xserver-xorg-core libgl1-mesa-glx:i386 libgl1-mesa-dri:i386 libgl1-mesa-glx:amd64 libgl1-mesa-dri:amd64
sudo dpkg-reconfigure xserver-xorg

My system booted fine, albeit low resolution etc.

So I tried to install proprietary again using this Debian how to: [URL] ....

Although the procedure looks the same for Deb7 as it does Deb8 (barring the source).

The same problem happened where I was stuck at the loading/splash screen after GUI login.

So I removed the proprietary drivers again and am now back in, again albeit low res like am back in he 90's. Also, that splash screen doesn't show at all now.

The driver is supposed to be fine with my setup, so is there some issue left over from the borked upgrade perhaps? Everything seems fine otherwise.

View 14 Replies View Related

Debian Hardware :: Can't Get HP ScanJet 8200 In Jessie To Work

Apr 15, 2015

I'm fairly new to linux. A few months ago I installed Debian Jessie and for the most part everything has gone pretty smoothly. The last piece of hardware I have to get working is my ScanJet 8200 flatbed scanner. From the SANE documentations, I know the hardware is supported, so I assume I must be doing something wrong with setup. It is correctly identified using lsusb:

Code: Select allroot@debian:/home/jessiesgirl# lsusb
Bus 002 Device 002: ID 8087:8001 Intel Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8009 Intel Corp.

[code]....

I get an error. Trying to use an application like SimpleScan give me an error telling me that it is unable to connect to the scanner.

View 14 Replies View Related

Debian Hardware :: Jessie - Three Monitors (2 Work The Other Is Not Recognized)

May 7, 2015

Running Jessie, x64 Intel iCore 7 16 RAM with a properly partitioned drive to the specifications I prefer. Running the KDE Shell. For some reason my third monitor is not detected by Debian Jessie at all. When I run the command to list the monitors lspci | grep VGA I think. Only two monitors are listed, I know the other monitor works. During Grub bootup it even has some startup text running in it.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved