Debian/Lenny: HPLIP installed fine from debian repositories; But when starting hp-toolbox, I get the error:
Code:
error: Unable to communicate with device (code=12): hp:/usb/Photosmart_C4200_series?serial=MY71TCQ11504VP
warning: Device not found
When logged in as root, all is well; logged in as user, above error occurs
i have troubles using various HPLIP applications (HPLIP toolbox, HP setup, HP systray icon) because it doesn't find QT4. However i have qt4 installed (at least i think so, there are quite a few QT4 packages available, and i can't a metapackage that will install everything needed but qt4core, qt4gui and a bunch others are instlalled. pyqt4 is installed.
View 4 Replies View RelatedI am using Debian Etch, Lenny. I tried to open 'HPLIP toolbox'; but the toolbox never appears.
View 8 Replies View RelatedI have mounted an NFS share with ISO images on my kvm Server. If i connect such a iso to a VM (using virt-manager) for installing a operating system i get the following error on startup: Error starting domain: internal error Process exited while reading console log output: char device redirected to /dev/pts/1 qemu: could not open disk image /mnt/iso/public/Linux/Distributions/Debian/debian-504-amd64-netinst.iso: Permission denied
The problem is definitly that kvm (or qemu or libvirt-bin, i don't know) tries to set permissions (rwx owner for libvirt-qemu, --- for kvm group, --- for other) on the file, although it has read permissions. Is it possible to change this behavior?
Deskjet-F4400-series
--------------------
Type: Unknown
Installed in HPLIP?: No, not using the hp: or hpfax: CUPS backend.
Device URI: usb://HP/Deskjet%20F4400%20series?serial=CN9C1CK70705C5
PPD: /etc/cups/ppd/Deskjet-F4400-series.ppd
[code]....
how do I get the printer installed in hplip? I can print but cannot scan. xsane will not recognize printer. Jaunty 64bit 2GB Ram 350GB HD
I installed the dovecot with aptitude in the debian squeeze, and want to use dovecot as imap and pop3 server with exim4 for my mail server, i configured the dovecot and exim4, but when want to start the dovecot get this error:
View 3 Replies View RelatedWhen starting vmwareplayer I get this error:
Unable to start services
See log file /tmp/vmware-root/setup-22433.log for details.
Here is the output of the log:
What do I need to do to get this working? I think this might be a newer version than the one which was working before.
I'm not very sure when this issue started. Anyway, the system finally boots and I haven't had any further problems, but I somehow notice the booting to be a bit slower since this error appeared and I don't like watching the red letters that say "failed" every time I switch the computer on. I googled this before posting it, and other users have had this issue, but the solutions that worked for them didn't work for me.
This is the content of my /etc/network/interfaces file:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
Yesterday, I was doing some work (Don't worry, I didn't lose anything), and I restored a terminal I had open, and it completely froze! I couldn't do anything on the desktop, so I tried rebooting. Doing that resulted in an error when booting. It would say "bin/sh : Can't mount" or something like that (Can't quite remember) not too long after trying to start up, and it would leave me stuck with some weird terminal. The only command I know on this new terminal is reboot. What should I do?
Note that I just installed Debian two nights ago and it was working perfectly fine until last night...
The error says "/bin/sh: Can't access tty; job control turned off"
Funny problem just began occurring in Debian Lenny.
If I use Konqueror to start Konsole (by pressing F4) and then run:
perl -le '{print "hello"}'
The result is:
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "en"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
hello
If I start Konsole directly, I do not receive any such errors.
I have an HP printer - C4200 series; Works fine in Slackware.
I am trying to get it to work in mepis-8.
Last thing done: hplip and cups were both un-installed and re-installed with no errors
When I try to install the printer hplip raises the error:
Quote:
printer queue setup failed. Please restart cups and try again.
This was done more that once; the last time after removing and reinstalling both cups and hplip.
I tried to install the printer using cups and get the error:
Quote:
Whoever has trouble with hplip GUI mode, install not only qt4 but also python-qt4.
View 1 Replies View RelatedI just installed HPLIP using Synaptic package manager. One of the configure parameters (shown by 'hp-check -r') is
Code:
Am I correct in assuming that this means that a network printer will not work? Is there a way to override this while still using synaptic package manager? Would I then be able to use a network printer?
I have my eye on the HP photosmart plus B209A - and it looks like HPLIP supports it (there is a ppd file for it).
I have tried to install the newer version of hplip on Debian 7.8 because the standard version does not support my printer.
So I proceeded the installation according to the instructions in hplipopensource.com, but the installation hangs after I enter the root password as this image: [URL] ....
I'm having a devil of a time trying to set up printing with 3 network printers: an HP Laserjet P4014n, an HP Laserjet 5200tn, and an HP Officejet Pro 8500 a909a. The three printers are connected directly to the office intranet and have their own ip addresses. The system I'm trying to configure is running Wheezy, and HPLIP and Cups are both installed. I have confirmed (from [URL] ....) that all printers are supported.
First, running "hp-setup -i" (hplip-gui is not installed -- I do not wish to pull in half of KDE simply to configure printing), the program only finds the 2 laserjets. Adding one of them creates a printer in CUPS with an "hp:/net/<printer name>" connection. Attempting to printing a test page through CUPS fails with message "/usr/lib/cups/backend/hp failed".
Interestingly enough, running "hp-probe -bnet" finds all three printers. However, running "hp-makeuri" with each printer's ip address fails with "error: Device not found". Hmmm, so HPLIP can apparently go from seeing everything to seeing nothing. Very useful.
Moving to the CUPs browser interface, clicking "Find New Printers" under the "Administration" tab also only shows the 2 laserjets, although each is listed three times(!). The only difference that I can see among the three versions of each printer is in the connection uri:
dnssd://<printer name>._printer._tcp.local/
dnssd://<printer name>._pdl-datastream._tcp.local/
dnssd://<printer name>._ipp._tcp.local/
Adding any one of them seems to work, although I do not understand why there are three of them (presumably different protocols, though what they are and the differences between them are, I don't know).
Logging into the officejet control panel and browsing at its network configuration, I see mDNS, SNMP, and WINS are disabled, although SLP is enabled. Looking in '/etc/cups/cupsd.conf', I see 'BrowseLocalProtocols' is set to only CUPS and DNSSD, so I add SLP and restart CUPS. No change; the officejet still doesn't show. I go back into the officejet control panel and enable mDNS (which, if I understand correctly, is essentially the same as DNSSD). Nothing; the officejet still doesn't show.
I just installed Gimp for editing images. I managed to disable the toolbox that appears on the right and cant get it back. How do I do it.
View 3 Replies View RelatedI have ubuntu (gnome) but I prefer to use Kile as tex editor. Since maverick, the side symbols tool box stopped working.I click, double-click ou press return but the symbol code (e.g. cup ) is not inserted in the text.Does any one have the same problem? How can I fix it?
View 9 Replies View RelatedI am getting this error
Starting web server: apache2[Wed Dec 09 15:36:40 2009] [warn] NameVirtualHost XX.XX.XX.XXX:80 has no VirtualHosts(99)Cannot assign requested address: make_sock: could not bind to address 68.178.232.100:80
no listening sockets available, shutting down Unable to open logs failed!
also what is 68.178.232.100
cups does not start with the server. When I try to start from the terminal I get the error message
cupsd: Unable to read configuration file '/etc/cups/cupsd.conf' - exiting!
cupsd: Child exited with status 1!
The log files show nothing. cupsd.conf exists. It is user - root and group - root with permissions set at 0644.
My interpretation of this is that the program is not launching from either boot or terminal for a fundamental reason. I do not quite see what that reason is .
I tried removing it and installing again but I still get the same code in the terminal:
[Code]....
I have Ubuntu version 10.10 and I'm trying to install the HP DeskJet 1000 J110a printer. I have HPLIP version 3.11 (the latest version I believe). The printer shows up but when I try to print the error message reads: Printer requires the 'foomatic-rip-hplip' program but is not currently installed.
View 2 Replies View RelatedI have suse10 64bit and I was setting up SVN server on it. After all required setup while reloading apache2,its giving the error:
Code:
httpd2-prefork: Syntax error on line 113 of /etc/apache2/httpd.conf: Syntax error on line 31 of /etc/apache2/sysconfig.d/loadmodule.conf: Cannot load /usr/lib64/apache2/mod_dav_svn.so into server: /usr/lib64/libsvn_subr-1.so.0: undefined symbol: apr_memcache_add_server
i am trying to get starting installing debian on my virtual server what is supported for IA64 and i have try'd this few different version(se bellow) and the img fail isin't boting?
debian-503-ia64-businesscard(notice diffrent version tryed to)
debian-503-ia64-CD-1(notice diffrent version tryed to)
debian-503-ia64-netinst(notice diffrent version tryed to)
I have used before virutal server and booted successfully a img file and installed a operating system sow what is wrong?
I had installed openSuSE 11.0 and then installed XEN using 'Install hypervisor and Tools' which is present in Computer -> YaST -> Virtualization.
After that I rebooted the machine in XEN mode[Dom 0]. There I installed a Virtual machine[Dom U] with OpenSuSE 11.0 Operating system using the option 'Create Virtual machine'which is present in Computer -> YaST -> Virtualization.
VM[Virtual Machine] got installed successfully and started running in TightVNC. I shutdown the VM and restarted it and it started running successfully.
After that I shutdown XEN[Dom 0] and restarted the machine in XEN mode again to run Virtual machine[Dom U]. But this time I got the below error when I selected the 'Run' option in installed VM.
Traceback (most recent call last):
I get this error when I start gvim:
Code:
Two days back I installed had setup subversion for my laptop from the following link HOWTO: Setting Up Your Own SVN Server (Using Apache and mod_dav_svn) - Mark S. Kolich
I don't know where I messed up the apache server. Now I am unable to start the apache server. I get the following error message:
We are running MailScanner 4.83.4-1 on a CentOS 5.6 64-bit distribution. The status of MailScanner was checked hourly via the check_mailscanner script, and normally the e-mailed result was:
Quote:
Which indicated the process was running without issue.
The server in question sits outside the company firewall, and was configured to deliver e-mail messages directly to their intended recipients. Our company recently changed its policy concerning external e-mail servers to require them to send their e-mails to their destinations via an e-mail gateway server. Consequently, the server was reconfigured to relay its messages to the gateway, and is no longer delivering messages directly to their recipients.
When the change was made, I noticed the check_mailscanner script was sending a new message which read as follows:
Quote:
I have tried starting and restarting the MailScanner software via the /etc/init.d/MailScanner script. The output of the script seems to indicate that MailScanner starts, but a subsequent check for the application via the ps -ef |grep MailScanner command shows the command is not running.
I checked the /var/log/maillog file for any reference to this when I did the restart of MailScanner, and the excerpt shown below coincides with the time that I ran the script:
Quote:
When i add hinted ( using gpac MP4Box) mp4 files in playlist on admin page of DSS 5.5.5 it gives following error
"An error occurred while starting or stopping your playlist." code...
I can't get Kaffeine to start. So i tried to run it from Konsole and I get this
Code:
kaffeine: relocation error: /usr/lib/libphonon.so.4: symbol pa_ext_device_manager_read, version PULSE_0 not defined in file libpulse.so.0 with link time reference
I updated / installed phonon Pulse. Now when I insert a DVD and select Kaffeine. I get this error:
Cannot find input plugin for MRL [dvd:/]
Now I have no sound.
The program I want to use: ProppFrexx Tagger or ProppFrexx Meta Data Editor, can be found here: ProppFrexx ONAIR - The Playout and Broadcast Automation Solution I need this to tag WAV files with RIFF INFO Tags.The Sony PSP can read RIFF Tags! so yeah, that's the reason I need this program. here the complete error message
Code:
exception inside UnhandledException handler: USER32.dll
I don't have Windows anymore, and I never going to use Windows again I hope there is a fix for that
