Debian :: ETCH Usb Harddrive Mount

Jan 28, 2009

I have two ext3 drives recovered from a failed NSLU2 network file server. I need to recover some of the files stored on them, so...I attempted to mount them on my debian ETCH (LV file system), thus:

# mkdir /mnt/usbdrive

# mount -t ext3 /dev/sda1 /mnt/usbdrive

Instead of seeing the drive content I see my harddrive's GRUB & Kernel partition. What am I doing wrong? What do I need to do to see the drive's content?

View 1 Replies


ADVERTISEMENT

General :: Mount USB Disk On Debian Etch That Doesn't Have A Module Node

Apr 2, 2010

I have a machine that has an integrated USB flash drive somewhere in it that I can not seem to mount. The OS knows it is there, as I can see it in the dmesg output, but the actual "node" in /dev doesn't actually exist. I'm baffled. Will you help me figure this out? Here's what I came up with so far. The disk is attached to the USB bus, used as a SCSI block device. In dmesg, it is referred to at one point as sdf, as well as under /sys/class/scsi_device. When I go check /dev, /dev/sdf does not exist!:

Code:

cat /proc/bus/usb/devices
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=090c ProdID=1000 Rev=11.00

[code]....

View 2 Replies View Related

Fedora :: How To Mount Harddrive

Nov 3, 2009

how to mount HDDalways all time when i restart system automatic mount when system startup

View 1 Replies View Related

General :: Mount Secondary Harddrive

Dec 6, 2010

My question is one of my users was using open suse on his workstation (690 DELL),there are 4 harddrives connected to the machine one is of 160GB and the other three are of 1terrabytes.His 160GB HDD got corrupted the one which is having OS and we replaced it to the new one.User advised to install RHEL 5.2 so i installed RHEL 5.2on 160GB HDD by disconnecting the other three HDD.After installing the machine i tried to mount the other three HDD but could'nt.The error message iam getting is 'Not valid partitiion table'.

View 6 Replies View Related

Red Hat / Fedora :: How To Auto-mount Ext2 Harddrive?

Jan 11, 2009

i want to get it to mount and set to automount

View 1 Replies View Related

Hardware :: How To Mount Harddrive When Running Live CD?

Mar 30, 2011

I installed Linux (ubuntu 8.04) to an 80 gig harddrive, but want to reformat the drive to install windows. Problem is, for some reason windows XP won't recognize the harddrive at all.More importantly, when I boot from a Ubuntu live CD, it doesn't seem to recognize the harddrive. Or at least, there is no entry in /etc/fstab like /dev/hda (hdb,c,d) I have tried different Live CD's (ubuntu, knoppix)... How can I get the Linux liveCD to recognize the drive?

View 2 Replies View Related

Hardware :: USB Harddrive Won't Mount After Cord Was Pulled Out

Jul 16, 2010

I was copying some files over to my Seagate FreeAgent external drive and someone (->me<-) tripped over the usb cord while walking through the area. Now the drive won't mount.

View 4 Replies View Related

CentOS 5 :: Xen Can See But Wont Mount NTFS USB Harddrive?

Jan 29, 2010

I've been trying to mount an NTFS USB hardrive inside a Xen DomU, but I keep receiving a permission denied error.I am using CentOS release 5.4 (Final) x86_64 for both Dom0 and DomU with latest updates

DomU # mount /mnt/iomega
ntfs-3g-mount: mount failed: Permission denied

Steps taken to reach the error:

1. I installed fuse and fuse-ntfs-3g in the Dom0 and successfully mounted the USD drive to make sure it worked. Then I unmounted it and block attached it to the DomU.

Dom0 # xm block-attach DomU phy:/dev/sdd xvdc r

2. I installed fuse and fuse-ntfs-3g in the DomU.I turned off SELinux (Though I don't think this is an issue)

DomU # /usr/sbin/getenforce
Permissive

3. checked for the USB drive with fdisk and found it /dev/xvdc1

DomU # /sbin/fdisk -l
Disk /dev/xvda: 10.4 GB, 10485760000 bytes[code]...........

View 1 Replies View Related

Ubuntu :: Mount NTFS Harddrive Not Visible In Fdisk?

Jul 7, 2010

I have a ntfs hard drive (my "C" drive in Windows) and it has some very important data (baby pictures) on it. The drive is, for some reason, very fail-prone. Last time it went out, I used ubuntu to make a windows disk (I have the key, nothing illegal!) and it went to the error fixing part or what have you and fixed it all up. That was a few days ago, and I was working on backing up the picturs but hadn't finished, and it failed again. Now I can't get it to fix the current windows installation, even though it's doing the same thing (making a clicking noise and stalling on boot before eventually giving up and booting to the ubuntu "d" drive.), it will only take me to the part about installing a new copy of windows, which I don't want to do because that would wipe the drive.

So my next idea was to try and get at the pictures through ubuntu, but when I use sudo fdisk -l, it only shows me my ubuntu hard drive.. Is there anything I can do to find and mount the other drive? I really can't afford to take it in to a professional for data recovery, and I've had them charge me an arm and a leg and do nothing but wipe my drive in the past, so I want to do everything I can to try and get my pictures back myself.

View 9 Replies View Related

OpenSUSE Install :: Boot Error 15, Can`t Mount Harddrive, And Can`t Run Fsck?

Apr 28, 2010

I was running 11.0 and it stalled in the middle of a number of updates. On reboot I now get (if I remember correctly) Error 15: File not found.I managed to get my hands on a 11.0 live cd and started trying to fix grub. However, when I try mounting the harddrive using "mount /dev/sda1" I got

Code:
can`t find sda1 in /etc/fstab or /etc/mtab
"mount /dev/sda1 /mnt" gives

[code]...

View 5 Replies View Related

Server :: Unable To Mount Additional Harddrive From RAID Volume System

Apr 8, 2010

I believe server section is the best when speaking of RAID stuff...

I have the following situation:We have a DELL T3400 with embedded fake raid on it. I dont know exactly how the system was setup (I wasnt here at that time), but the RAID was enabled in bios and while booting, the two harddrives would be seen as members of intel raid volume0 (RAID 1 mirror). I am not sure if the software raid was actually properly configured in Linux (Fedora 9) and if the OS was reconstructing the whole raid or it was just the bios part that was mirroring the /boot or just some parts of it. Frankly I find these hydrid raids very confusing.Some bad disk manipulation from my part caused the server to crash, but I was able to recover and boot just with one hard drive after using fsck.

I decided to get rid of the raid as it's not the right solution for the application we need it for and decided to go for a traditional single harddrive system and to use Ghost for Linux to clone to a spare disk when backups are needed.So I installed the latest Fedora 12 distribution onto another harddrive and disabled RAID in bios (changed from RAID ON to autodetect, which is the only other option).

Here is what I have now:
/dev/sda has the newly installed fedora 12
/dev/sdb is an empty harddrive that I would use as an intermediate
/dev/sdc is the old harddrive member of intel raid volume0

sdb was partitioned into sdb1 sdb2 and sdb3 and I created an ext3 filesystem on sdb2. The hard drive belonging to RAID volume0 (sdc) has a lot of work done on it and I would like to be able to recuperate the files to the new disk (sda). I cannot mount that old harddrive while in fedora 12, as it sees some unknown raid member filesystem on it probably assigned by the intel raid chip.

So I decided to do it from the other side: to boot from raid volume 0, and from there mount a third intermediate harddrive (sdb) onto which I would copy the documents and then mount the same harddrive from the newly installed fedora 12 and copy those documents from that intermediate harddrive.I can mount /dev/sdb2 from fedora 12 fine and copy stuff to and from it, but not when I boot from the RAID volume 0 harddrive (sdc) with fedora 9 on it. It keeps saying that the partition in question (/dev/sdb2) is an invalid block device.I am stuck here, as my knowledge in this sort of things is very limited.If somebody can indicate me how to recuperate files from that old raid harddrive onto the new fedora 12 drive, I would appreciate a lot.

View 3 Replies View Related

Debian Multimedia :: Ripping Mp3 Cd On Pressario And Debian Etch

Feb 2, 2010

I have an old compaq pressario (with a compaq cd/dvd player + HP cd writer/Reader) with Debian Etch and a gnome desktop, and I would like to extract the mp3 dvd a friend gave me (He made it from bittorrent). On a XP box the cd is played without problem but I would like to extract and play each song on Etch. I have Sound juicer which works allright for usual audio cd but not with this mp3 thing. I have tried to define a new profile with params I have found on the net for mp3 but up to now without success. I even don't know if it's a problem of hardware being too old, or if I could solved this with the appropriate software

View 6 Replies View Related

Debian :: Python 2.6.4 On Etch 4

Apr 15, 2010

I was able to compile python 2.6.5 on debian 4 etch successfully. The contents of /usr/share/python/python_defaults are now like this:

Typing "python" on terminal now starts the correct version which is 2.6.5.

The next thing I installed wxPython from wxWidgets repository. I followed the instruction explained here:

[url]

When installation was about to finish, I got this error:

I am sure something I have missed something before installing wxPython. It seems it's related to "python_defaults", but I am not sure.

View 3 Replies View Related

Debian :: Clamav 0.96 In Etch

Sep 23, 2010

There is a "Debian" way to get clamav 0.96 in Debian Etch 4.0 ?

I put volatile repository in my sources.list, but after upgrade I've:

Quote:

View 1 Replies View Related

Debian :: Live CD's Of The Last Revision Of Etch ?

Feb 25, 2011

For archiving purposes, I am looking for the different (Gnome, KDE, Xfce) live CD images of the last revision (9) of Etch. I want a copy of them to compare how the system and the desktop environment have evolved in the last couple of years. Actually, I would also like to have live CD images of older releases, but I don't know if they exist.

View 5 Replies View Related

Debian :: Best Way To Migration Etch To Lenny?

Mar 16, 2010

actually my Debian is still in Etch stable version. What is the best way to migrate to stable lenny version

My understanding was :

replacing Etch links in sources.list with Lenny links perform aptitude update & aptitude safe ugrape.

View 1 Replies View Related

Debian :: Apt-get Update Does Not Work (Etch)?

Jun 21, 2010

tried to to run apt-get update (under Debian Etch)but it does not workI get the output (see apt_get_output.txt)I also tried running apt-get upgrade first, but that did not change anything.My sources list looks like (see sources.txt)

View 8 Replies View Related

Debian :: Cannot Upgrade From Etch To Lenny

May 18, 2011

I try to upgrade Etch to Lenny and get the following problem:

Code:

# apt-get update
# apt-get dist-upgrade
Reading package lists... Done
Building dependency tree... Done

[code]....

View 7 Replies View Related

Debian :: Install ETCH Over The Internet ?

Feb 17, 2010

I need to install Etch (not Lenny ) over the internet - but all my mirrors won't even entertain me. Is there a way to still install Etch over the 'net - as opposed to Lenny? I need Etch because of some specific software I am running - and I have to PXE boot (I've used the Etch netboot.tar.gz files).

View 6 Replies View Related

Debian :: Upgrade From Etch To Lenny?

Apr 21, 2011

I've a very old server with Debian Etch, and now I need to upgrade to Squeeze. I think it's correct to upgrade first to Lenny, so I followed this link:

[URL]

[code]....

Score is -2280

Accept this solution? [Y/n/q/?]

View 2 Replies View Related

Debian :: Update Debian 4.0 ''etch"?

Jan 8, 2011

I can't update Debian "etch" Is there any sites for updating?

View 9 Replies View Related

Debian :: No Incoming Emails On Debian Etch

Mar 2, 2011

I have recently started working on our server. My knowledge about *nix systems is very limited, so I turn to the oh-so-friendly internet community for help.The server is running Debian Etch, postfix, courier and some other stuff. And suddenly out of the blue the emails from the internet are not being received. Emails being sent internally are being received and everyone can browse the internet.Host or domain name not found. Name service error for na$for name=xxx.xxx.xx.xx.list.dsbl.org type=A: Host not found, try again.Does anyone have any experience with something like this? I would love to get this thing fixed.

View 6 Replies View Related

Debian :: Debian Etch - Virtual Server - GUI?

Jun 18, 2010

I am renting a virtual server which is running Linux Debian Etch. I have access through the root account.

I am very new to virtual servers, and also very new to Debian Etch. I am happy I found this forum when trying to research on the Internet.

The things I need to know are:
- Comes Debian Etch with a GUI (graphical user interface) which I can use on the rented virtual server?
- And if not, I would like to ask the community here if there are any GUIs which I could install to that server, and how?

I want to be able to access the server in a much easier way than to have to type each command. I want to use that server to host domains, as soon as I am more self-confident with Debian Etch.

View 10 Replies View Related

Debian :: Debian Etch Repository - Several Error

Aug 23, 2010

I need to install some package on a very old box with Debian Etch.

When I type: apt-get update

I get several error:

Quote:

Where can I find a valid etch repository?

View 2 Replies View Related

Debian :: Installing Etch From Debian Installer

Aug 26, 2010

Now that Etch is on archive.debian.org - how do I get the Debian installer to install it (via. net)?Before everyone shouts "upgrade to Lenny" - I need Etch for a reason.Simply putting archive.debian.org as the install mirror doesn't work either.

View 10 Replies View Related

Debian Installation :: Get Flash Working On Etch?

Apr 29, 2011

I need to get Debian ETCH working with Flash, due to professional issues I cannot update to a newer Debian distribution (Squeeze for instance) now.[URL]Which tells me to use swfdec0.4 or swfdec0.5. but the archive repository for Etch only provides this swfdec0.3 are there any repository able to provide this out of date lib

View 4 Replies View Related

Debian Configuration :: Xen On Lenny Making Etch Vms?

Mar 16, 2010

Why is my Xen server (An up-to-date Lenny box) making Xen DomUs as Etch boxes? I run a command such as:

[Code]...

This is 100% replicable. I certainly never asked it to create an Etch VM! I cannot find anything in the docs to change this. And for the record, I did let it finish creating it, and it most definitely made an Etch box.

View 2 Replies View Related

Debian Configuration :: Install Postgresql-8.2 On 4 Etch ?

Jun 13, 2011

I'm going on to install my old application running on specific old configuration (debian 4 etch) into my virtual machine...

This time, i'm hurting a new problem while installing postgresql in the release 8.2 (not 8.3, nor 8.4, neither 9.x cause my application will run only on 8.2).

Logging in root, i enter this (like in 2008) :

But today (year 2011 with old etch), when i enter this i got the error message than it cant find this paquets ! off course i did my apt update before.

So, what can i do ? i really need to install the exactly 8.2 release (even 8.2.21 will be good)

View 1 Replies View Related

Debian :: Postfix Virtual Domain On Etch?

Aug 13, 2009

I have a mail server up and running sending and receiving mails with one primary(dom1) and a virtual domain(dom2). My problem is that i get the header anyUserOfDom2 at dom1.tld when i receive mail on my gmail account which i sent myself from user at dom2.tld . So the part after the at sign should be dom2.tld but i get dom1.tld so people can't send replies.

View 2 Replies View Related

Debian :: Etch / Lenny Package Differences?

Sep 15, 2010

Just to set the scene, I'm not a Linux expert, but am learning the hard way! I have a 6 server cluster that needs upgrading (this includes quite a few of our own packages), and am currently working on a spare server. Lenny is now installed, and my next problem is that libapache-template-perl doesn't seem to exist in Lenny. So, is there a definitive list of 'replacement' packages, if not what can I do about this one.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved