Debian Configuration :: Install Fglrx Drivers For ATI Card With Testing?

Dec 22, 2010

I have been trying to install fglrx drivers for my ATI card with Debian testing (x86) but without any luck. I have tried what it says here http://wiki.debian.org/ATIProprietary but I only come up with a blank screen (and also invoke-rc.d gdm stop does not work either?) I have also followed the directions at [URL]....html and that doesn't work either (make error 127). I must be doing something totally wrong.

View 6 Replies


ADVERTISEMENT

Debian Configuration :: How To Install Alsa Drivers Along With Asus Xonar Dgx Sound Card

Oct 2, 2015

how to install alsa drivers along with Asus xonar dgx sound card. I followed these instructions. URL....And until "Setting up modprobe and kmod support" instructions were clear. I should put something in /etc/modules, but I dont down exactly what.

Code: Select allroot@SERVER:~# aplay -lL;
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC887-VD Analog [ALC887-VD Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0

Code: Select allroot@SERVER:~# lspci -nn | grep -i audio;
00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 05)
02:04.0 Multimedia audio controller [0401]: C-Media Electronics Inc CMI8788 [Oxygen HD Audio] [13f6:8788]

[code]....

View 3 Replies View Related

Debian Configuration :: Ways To Get Drivers Installed For Graphics Card

Jul 4, 2010

I'm going about my ways to get my drivers installed for my graphics card, but the page I'm using, URL>..has me apt-get install "nvidia-kernel-common".Synaptic says it doesn't exist, and it appears to be a pretty important package to have. So is there a way for somebody to get that online for me to install?

View 5 Replies View Related

Debian Installation :: Testing Install: Network Configuration Fails?

Sep 14, 2010

I'm trying to install Debian-testing to an ASUS 1018P netbook on which I have successfully installed Arch in the past. I'm installing from an external DVD drive and when I get to the point of network configuration it fails. I'm connected via Ethernet via eth0 which is recognized. Here is the last part of the ouput:

kernel: [ 1807.932848] atl1c 0000:01:00.0: irq 29 for  MSI/MSI-X
kernel: [ 1807.933453] ADDRCONF(NETDEV_UP): eth0: link is not ready
dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval is 8
dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval is 15
code....

View 14 Replies View Related

Ubuntu Installation :: Use The Current FGLRX Drivers With A Mobility Radon X2300 Card On A HP6910p With Lucid?

Apr 20, 2011

Can I use the current FGLRX drivers with a Mobility Radon X2300 card on an HP6910p with Lucid?

View 2 Replies View Related

Hardware :: Compiling Fglrx Drivers On Debian 5.0.6?

Oct 28, 2010

I am running Debian 5.0.6 and trying to install an ATI FirePro V3750 graphics card. I am unable to compile the fglrx driver. if there is some way to manage to install the fglrx drivers.

cpus amd64 dual quads
motherboard tyan 2927
video ati V3750
kernel 2.6.26

headers and gcc fully installed.

View 1 Replies View Related

Ubuntu :: Install Prerelease ATI / FGLRX Drivers?

Mar 31, 2011

I'm currently using the default, open-source drivers. I'm aware that the ATI proprietary drivers have been released as a pre-release DL. How do I go about installing it? Is there a process I need to stick to? [URL]...

View 6 Replies View Related

Debian Multimedia :: Jessie 64-bit Steam Crashing With AMD Fglrx Drivers

Sep 24, 2015

I recently switched over to Debian 8 "Jessie" (64-bit Cinnamon flavor) on my Desktop.

250GB SSD
16 GB DDR3 RAM
i7 4790 Processor
AMD Radeon R9 280X

I have been able to play multiple games on Steam without any issues, however I have downloaded Ark: Survival Evolved and am unable to actually play that game in particular. I can log in and get to a point of choosing a server, but after it actually loads to the game(where it starts rendering graphics), the game crashes to the desktop. Below is the readout of the crash from when I loaded Steam via Terminal.

Code: Select all   
    Signal 11 caught.
    ERROR: ld.so: object '/home/lukasz/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
    ERROR: ld.so: object '/home/lukasz/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
     
[Code] ....

I have noticed that the above (zenity:13343): Gtk-WARNING line in terminal is the point at which the game crashes. It would appear that the steam gameoverlayrenderer.so is a separate issue and may be a common occurence in the background that you just don't see.(?)

Things that I have done thus far:

-Verified that the video card is good
-Tried Open-source graphics drivers
-Currently using the AMD 15.9 Proprietary Drivers directly from AMD with Catalyst Control Center.
-Reinstalled "zenity" to ensure that it was not corrupted.
-Verified which Gtk+ versions that I have installed(see below)

Code: Select all   
    lukasz@Lukasz-Desktop:~$ pkg-config --modversion gtk+-2.0 gtk+-3.0
    2.24.25
    3.14.5

Is there a "default" gtk+ version that I have to alter for it to recognize that I have Gtk+ 3.0 installed, or did I miss something somewhere?

My hypothesis:

-It has something to do with 32-bit/64-bit conflictions(Maybe the game? My steam is 64-bit)
-My graphics card may not be supported by Ark: Survival Evolved yet.
-I am missing some libraries each time I have attempted different video drivers.
-Something with steam did not get installed correctly(I have not attempted to uninstall and reinstall it, however other games function correctly)

View 7 Replies View Related

OpenSUSE Install :: ATI Fglrx Drivers - Cannot Boot Into Normal Mode

Jan 15, 2011

I've installed fglrx drivers with 1click install on openSuse11.3. If I try to boot in "normal mode" I end up in black screen. However if I boot in safe mode, then login and startx, everything works ok

Code:
~> fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: ATI Mobility Radeon HD 4300 Series
OpenGL version string: 3.3.10151 Compatibility Profile Context
Shows fglrx works OK, as well as overall performance is pretty good.

I've done
Code:
aticonfig --initial
radeon drivers is also blacklisted
but running (if it means something)
Code:
# depmod -a; lsmod | grep radeon
radeon 868858 0
ttm 64561 1 radeon
drm_kms_helper 32944 1 radeon
drm 221516 3 radeon,ttm,drm_kms_helper
i2c_algo_bit 6728 1 radeon

View 4 Replies View Related

Debian Configuration :: Install The Nvidia Drivers From The Repository?

Jul 7, 2011

I want to install the nvidia drivers from the repository (they seem quite updated lately). But i hit some issues:

# aptitude install nvidia-glx
The following NEW packages will be installed:
libgl1-nvidia-alternatives{ab} libgl1-nvidia-glx{ab}
libglx-nvidia-alternatives{a} nvidia-glx nvidia-installer-cleanup{a}
nvidia-kernel-common{a} nvidia-kernel-dkms{a} nvidia-support{a}
nvidia-vdpau-driver{a}

[Code]...

Since the nvidia packages are in testing i assume they can be installed, do they?

View 6 Replies View Related

Debian :: Testing Netinstall Doesn't Detect NIC / Drivers

Apr 12, 2010

I tried to do Debian netinstall from minimum iso image in my brother's pc. My Network Interface card is Intel 82578DC GIGABYTE Network Connection. The installer gives a list of drivers to install but I don't know what to do. Should I download and install from first CD/DVD? Will it have appropriate drivers then?

View 5 Replies View Related

Hardware :: Aticonfig / Fglrx Error On Debian With Card Radeon HD 6870

Jun 26, 2011

i tried setting up fglrx driver for my card using the steps outlined here: wiki.debian.org/ATIProprietary
but when I get to the step where it tells me to use aticonfig i get this error: Code: aticonfig: No supported adapters detected I tried to make xorg.conf myself by doing what it says and making this the xorg.conf file:

[Code]...

but X won't start if I do that (delete xorg.conf and it goes back to it's fglrx-less state) However, I was successfully able to install the drivers on my Ubuntu install (different partition on the same machine) but not my Debian install.

View 5 Replies View Related

Debian Configuration :: Fglrx System Hang On Screen Suspend

Aug 18, 2015

My system is hanging on screen suspension... And its not the usual hang on "sleep" or others similars, it will happen by only having the screen on stand-by ( eg xset +dpms)...

If I leave for a while the screen will shutdown as expected but computer will completely hang after an indefinite time, it will not respond to outside connections and the will be spinning faster than usual...

Only workaround is to have the screen power save option disabled, in my case, on the KDE settings...

I have tried the most common solution to have "nomodeset" as a kernel option to disable mode setting, but this doesn't seem to work...

Also tried to forcebly reproduce the issue with Code: Select allxset force dpms standby/suspend/off but nothing happens like that...

This issue also only appears with the fglrx driver, open-source works well.

View 0 Replies View Related

Debian Configuration :: Fglrx Isn't Working With The Latest Liquorix Kernel

Nov 5, 2010

For quite a long time now, I haven't even needed to re-install video drivers most of the time. However, ever since version 2.6.36-0.dmz.4, they haven't been. I booted my system after installing that kernel, re-installed the video drivers, and when that didn't work, completely removed them and re-installed them, and it still didn't work. Well, I was told that the installation was successful but even after restarting it appeared that they weren't working. I installed 2.6.36-0.dmz.5 today and the same problem persists. I tried an older kernel version (2.6.36-4 something) and they worked fine.

View 2 Replies View Related

Debian Hardware :: ATI R7 Graphics Card - Open Source Radeon Or Fglrx Catalyst?

Jul 11, 2014

I've set up this new PC, the graphic card I picked is the ATI R7 260X, pretty good card with lots of core processors, high clock and 2GB memory. I'm now currently using the 14.4 catalyst drive, it works actually alright, though, there are some mishaps with this driver:

First my hdmi screen had scale down, leaving black borders around, even though the catalyst control said the correct native resolution, this turned out to be a underscan that fglrx does and I've finally managed to fix it. Other caveat is that the screen simply won't suspend or turn off( via software), DPMS actually works, forcing it turns the screen blank for some seconds but something does not allow the screen to sleep.

Performance wise it seems pretty good though, everything is pretty smooth, being able to play games maxed out on resolution and ultra settings, though, I still haven't tested out that many games.

The open-source radeon on the other hand, well its open-source, fully xorg and linux compatible, which is a major plus point. It seem it has come a long way, supporting lot of features and providing better performance in some cases.

Before installing Catalyst I had issues with mesa and steam, steam would complain about not finding the 32bit libraries, this is however a steam runtime issue, maybe it could already be fixed.

View 1 Replies View Related

Debian Configuration :: Install Xserver-xorg Without All The Unnecessary Drivers For Video Cards?

Jun 20, 2010

How can I install xserver-xorg without all the unnecessary drivers for video cards / peripherals I do not have on my system?

View 2 Replies View Related

Debian Installation :: Debian Testing Does Not See The Network Card?

Oct 8, 2010

I just installed the Debian testing release(with LXDE) from this week. Everything works great except the network card. I know the network card works because Windows and the Parted Magic Live cd recognize it. Also "lspci" seems to list the card, but when I fire "ifconfig -a" it is not listed there.

View 12 Replies View Related

Debian Configuration :: Install The Driver For Mi Wireless Card?

Apr 22, 2010

I'm trying to install the driver for mi wireless card. The instructions say that to build the tar.gz file, I have to:

# mkdir hybrid_wl
# cd hybrid_wl
# tar <path>/hybrid-portsrc.tarhybrid-portsrc-x86_64.tar.gz

The third step i don't understand. I want the folder of the driver to be located in a folder inside home called "Programas" so what I did was to open the terminal, went su, and then did cd Programas. Then I followed instructions 1 and 2, but I don't know what to put where it says <path>.

View 14 Replies View Related

Debian Configuration :: Install The Graphic Card Driver?

Jul 18, 2010

I just installed Debian 5 in my pc. I have made all the updates but my screen is a bit bright and the resolution isn't very good. I think that i need to install the graphic card driver but all the solution i find in google didn't work . My laptop is Toshiba satellite pro u400 and my card is Intel GMA 4500 MHD.

View 4 Replies View Related

Debian Configuration :: Startx Fail On The Testing?

Oct 21, 2010

I get the following on startup:

(==) Log file: "/var/log/Xorg.0.log", Time: xx
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(EE) open /dev/fb0: No such file or directory

[Code].....

My usual aptitude safe-upgrade routine has not throw any errors. I do remember a libxcb-* package updating (or installing?) on the last run. This is the only relevant package I can recall.

View 14 Replies View Related

Debian Configuration :: Moving From Testing To Squeeze?

Feb 9, 2011

I have an older system that has been running testing for about 4 years. Originally I was running testing for several packages that were not yet available in stable. However, now that this system has a more crucial role in the network I have considered moving it to stable in hopes that it I can gain some insurance on it's uptime. It is important to note that I have never had a problem with the testing distribution and would be quite content to continue running it; I do want to know my options though.

I have not yet updated the system since the stable release of squeeze, I am considering to change my sources from testing to stable and just let apt take care of the rest. Anyone have any experience with such a thing? After searching Google I have found some solutions to force a downgrade, but that is really not what needs to be done here. I suppose I should have switched my sources to squeeze some time ago and this probably would have worked itself out.

A similar question is what happens a couple of years from now when another release happens. Have you had good luck updating from old stable to stable? I've run testing on several machines now for several years and have went through freezes and dist-upgrades several times with no major problems at all. Will I see the same stability if I move to the stable distribution?

View 1 Replies View Related

Debian Configuration :: GUI Didn't Install And WiFi Card Is Not Supported

Nov 28, 2015

I've been using Ubuntu and Mint for a few years now, and I want to try Linux on my HP Stream7 Tablet. I was very excited to learn that Debian 8.0 and later has support for 32 bit UEFI on 64 bit Processors and went ahead and installed the multiarch version of 8.2. It works, but I have no GUI (Just a command line) and no WIFI connection. It seems the GUI didn't install and the WiFi card is not supported. I have found a driver for the wifi card but don't know how to install this driver. URL....

View 4 Replies View Related

Debian Configuration :: Wireless Config With System In Testing?

Nov 8, 2015

I'm trying to set up my Intel Wireless 3945ABG (which is supported in the kernel) and I don't understand where to start if I want to use systemd to do this.

I've installed my Debian (Stretch Alpha4) base system using the wireless to download the necessary components but when I boot into the system I need to set up the wireless card separately.

I would prefer to be able to install wireless without the requirement of connecting via ethernet so no package installs other than what is downloaded by the installer.

I can't even find documentation on this specific issue because everyone seems to reference /etc/network/interfaces which AFAIK is not supported in systemd. How do I configure a wireless card using only systemd?

View 2 Replies View Related

Debian Configuration :: Nm-applet Doesn't Start After (Testing)

Feb 22, 2016

After the latest update of network-manager-gnome to version 1.1.90-3 , I see that I have to start the nm-applet in Testing from a terminal, otherwise I can't bring up my wired connection.

The usual nmcli networking on command is failing to connect, also restarting the network-manager.service with systemctl doesn't do anything, the only way to connect at this time is indeed to manually start the nm-applet from a terminal.

I've also spotted this message in the logs:

Code: Select alltraps: nm-applet[1105] general protection ip error:0 in libgobject-2.0.so.0.4600.2

Could it be something wrong with my configuration (although , it worked before this update) or is it some bug in network-manager-gnome 1.1.90 ?

View 4 Replies View Related

Debian Configuration :: Testing/Sid - ProFTPD - File Wrong?

Feb 26, 2010

I've been working on the setup of a FTP server on my Debian system for the whole afternoon. But I can't get it straight! Normally I get it working in just a second, but it's been a while I guess.

I installed only proftpd-basic and it's default dependencies. Should be enough right?

My configuration files are as follows:

I created the user zeitgeist, gave it a password, group and a homedir. Group of the user is nogroup and the homedir is correct with the 755 permission. My port 21 for FTP is open I tested it with nmap -p 21 [ip-address].

My Filezilla client tells me that at first he is connecting, then the connection is established, And then the connection is closed by server.

View 1 Replies View Related

Debian Configuration :: Blueman Broken In Testing (Squeeze)

Jun 30, 2010

For anyone using Blueman with Testing (Squeeze), todays Python upgrade to version 2.6 stops it from working due to a Blueman bug. This has been fixed in blueman version 1.21-4, which you can install from SID if you don't want to wait the 10 days for the normal migration.

View 1 Replies View Related

Debian Configuration :: Keyboard Freezes Periodically In Testing

Feb 17, 2011

I am running testing (with fluxbox) and my keyboard periodically freezes, meaning whatever I type in it doesn't respond. This lasts a few seconds (can be 2-3 or sometimes even more like 10) and one's it comes back I get all the keystrokes I was typing during the freeze. The frequency of the freezes can be like 4-5 times every hour and are very annoying. I can't seem to relate them to anything, they can occur during heavy usage but also when the box is doing absolutely nothing but waiting lazily for me to type some google search terms.

Can anybody help me track this problem down? At the moment I am using a wireless keyboard but this must be unrelated since I tested a couple of other keyboards (both wireless and wired) and the problem persists.

View 1 Replies View Related

Debian Configuration :: Unstable/testing Kernel With Stable?

May 19, 2011

can't use catalyst driver, virtualbox refuse to run, selinux problems,I want to know if its possible to install only this new kernel 2.6.38 without "contaminating" the rest of my installation with unstable packages?

View 2 Replies View Related

Debian Configuration :: No Menu In Openbox After Testing Upgrade?

Jun 6, 2011

After doing a aptitude full-upgrade I no longer have the Debian menu showing in the Openbox menu. According to Obmenu, Debian is listed; it's just not showing when I right click. The upgrade brought a new version of Openbox so I assume that has something to do with it.

View 9 Replies View Related

Debian Installation :: No Wireless On Jessie Testing With Intel 6300 Card

Mar 9, 2015

I just installed jessie testing however the wireless card was not recognized, lspci says it's Intel Centrino Ultimate-N 6300.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved