Debian Configuration :: How To Change The Default Language Of Gnome

Sep 13, 2010

how to change the default language of gnome.when i boot into x-window ,i can select the language ,But ,if boot into console ,via "startx" to run the w-window ,the language is english,i can't select .my native language is Chinese.i set the right locale .I also searched for it .Someone told to add "export LANG=zh_CN.UTF-8"to $HOME/.xinitrc.there's no this file in my home dicretion.I create it .after that,when i run "startx",it's failed to start x-window.the ~/.xsession-error file shows

Initializing gnome-mount extension
seahorse nautilus module initialized
Unrecognized number formatter: cjk-chinese-simp
Unrecognized number formatter: cjk-chinese-simp

[code]...

how can i change the default language ,i have to .because if gnome is in English ,i can't run the Chines input method.

View 1 Replies


ADVERTISEMENT

Ubuntu :: Change The Default GNOME Configuration For New Users?

Aug 22, 2010

I'm looking to customize the environment for new users by changing the items in the GNOME menu, change the panel layout, add some shortcuts, and do a few other things. I looked in /etc/skel and there doesn't seem to be anything GNOME related in there; I also tried to put .gconf, .gconfd and .gnome2 from my home directory into /etc/skel and that didn't do what I wanted.

View 5 Replies View Related

Debian Configuration :: Change Default Ftp Session Directory?

Apr 10, 2010

i have created a wordpress user with a symbolic link from his home (/home/wordpress) to /usr/share/wordpress but when wordpress ftps to wordpress home dir it does not follow the sym-link. is there a way to set default ftp dir for the wordpress user to /usr/share/wordpress rather than /home/wordpress?

View 6 Replies View Related

Debian Configuration :: Change Default Editor In Live Usb-hdd Creation?

Apr 29, 2011

Howto change default editor by live usb-hdd creation? Normally, I can change from the command line:# update-alternatives --config editorbut howto put it into live config?

View 1 Replies View Related

Ubuntu :: Change Pidgin Default Spellcheck Language?

Apr 8, 2011

I use Pidgin for Gadu-Gadu protocol. I use it almost entirely to communicate with polish people. Each time I open new tab i need to manually change to "polish" from the context menu.

Is there a way to change the default spell check language without changing the environment language? I don't mind if it is some dirty hack or requires recompiling but since I'm not the only one trying to do that some simple tweak solution would be nice.

View 1 Replies View Related

CentOS 5 :: Language Won't Change In Gnome?

Mar 13, 2009

I have installed CentOS on two machines. On both these machines the language won't change in gnome, but it changes on the login screen. In gnome, the langugare is always swedish. I want Swedish keyboard (this works), but everything else English. locale gives:

LANG=en_GB.UTF-8
LC_CTYPE="sv_SE"
LC_NUMERIC="sv_SE"
LC_TIME="sv_SE"
LC_COLLATE="sv_SE"

[Code]..

View 1 Replies View Related

Debian Configuration :: How To Change Gnome / Mate Backends

Jan 3, 2016

I got some trouble with suspending/hibernation using gnome or mate. None of them can suspend the T450 correcly neither to disk nor to ram. If I run pm-utils from a terminal pm-sleep and pm-hibernate work fine both. So I guess all I need is to change the commands which are run by clicking on the suspend or hibernate button, but how to change what is behind the GUI.

View 0 Replies View Related

Ubuntu :: Change Language Gnome Terminal 10.04

Apr 27, 2010

I just installed ubuntu 10.04 on our laptop. for convenience I also installed the dutch (gnome) translation and selected Dutch as the default language so all menu's and localisation is suitable for the Netherlands and the misses understands stuff. However I noticed that the gnome terminal is also translated so all output from bash is now in Dutch too. This is really inconvenient since I have been using bash in english on fedora and ubuntu for 10 years now. So is there a way to reconfigure gnome term (bash) to default back to english and leave the GUI in Dutch?

View 2 Replies View Related

OpenSUSE Install :: Change Default Session From Gnome To Gnome-fallback?

Sep 12, 2011

Does anyone knows how to do this for all users with one command?Or which file i have to edit to do this?

View 9 Replies View Related

Ubuntu :: Change Keyboard Language To Specific Language By Hotkey?

Jun 13, 2010

is there some way to change keyboard language to specific language by hotkey?

For example:
Shift+Alt+1 - English
Shift+Alt+2 - Russian
Shift+Alt+3 - Ukrainian

View 2 Replies View Related

Debian Multimedia :: Add Language Gnome Squeeze

Aug 19, 2011

I've just installed gnome in debian squeeze and I can not find how to change gnome language. I've found that you have to change it in gdm, but i don't know how to add new languages to the current ones.

View 1 Replies View Related

Fedora :: Language Of Boot Message Change To Other Language?

Jan 7, 2011

When I boot the fedora system,disable the plymouth,the language of booting message showed is english.Can it change to other language,chinese?

View 2 Replies View Related

Debian Configuration :: System > Administration > Language Support Is Missing

Jun 3, 2011

I am running Debian 6.0.1, GNOME version 2.30.2. For some reason the "language support" option is missing. What do I need to do in order to recover it?

View 3 Replies View Related

Debian Configuration :: Boot Via PXE, "no Default Or Ui Configuration Directive?

Mar 19, 2011

A week ago I opened this thread viewtopic.php?f=17&t=61580 in "Board index ‹ Help ‹ Installation" and asked for a moderator to move this to here. Because it hasnt happened up to know, I am reopening the thread here. It would be reeeeally great if somebody could help me with my problem!

I own two computers, one netbook and one laptop. I want to boot my netbook as a diskless client via PXE.I set up a dhcp-, tftp and nfs-server on my laptop but when i boot my netbook, the follwoing messages are displayed:(to make it more clear, i uploaded the whole output and shortened the output below)

[Code]...

View 1 Replies View Related

Fedora :: Change Default Window Manager In Gnome?

Feb 19, 2010

How to change default window manager in gnome?

View 6 Replies View Related

Ubuntu :: Change The Default File Manager In GNOME?

Dec 13, 2010

How can I change the default file manager in GNOME? I've got these notes but neither methods work:

GUI
Change under 'Session control' in 'Ubuntu Tweak'
Delete nautilus and type in pcmanfm or another file manager such as thunar
Apply
Quit ubuntu-tweak
Reboot

TERMINAL:

Code:

gksu gedit /usr/share/applications/nautilus-folder-*handler.desktop

Then replace 'nautilus --no-desktop %U' to whatever you like. Example: pcmanfm %U

Save, logout & login

Update: This works. Why does the Ubuntu Tweak method not work though?

Code:

sudo gedit /usr/share/applications/nautilus-folder-*handler.desktop

View 9 Replies View Related

Ubuntu :: Can't Change Default Window Theme In Gnome 3

Jun 8, 2011

I recently went through a desktop crisis after removing unity from 11.04, installing openbox, hating it, and then installing Gnome 3. What's weird is certain applications like chrome and some other system things appear to use the theme I have (as in, they look nice) but windows like terminal, file browser, and most other applications including the default log in screen all look like windows 95.

you can see the square unstyled buttons. I'm just wondering how to apply a full on system theme to apply to all windows in gnome 3. tweak-gnome didn't look like it could do it, and after running through the themes (redmond, clearlooks, etc) they didn't have any impact on these windows.

View 3 Replies View Related

OpenSUSE :: Configuration To Change Default Desktop Background?

Oct 25, 2010

Where is configuration to change default desktop background?

View 7 Replies View Related

Server :: Change The Default Interface In CFEngine Configuration?

Jul 1, 2011

I'm using CFEngine 2.2.8 to configure a network of Debian servers, the servers have two interfaces eth0 and eth1, how can I configure cfagent to take as the default interface eth1? eth0 is the internal interface and eht1 is the one with the public IP, I need to define classes based on lists of public IPs and it would be really helpfull if I could use functions as IPRange that only consider IP in eth0 interface.

View 1 Replies View Related

Software :: Configuration Default For GNOME Power Manager Not Correct

Oct 26, 2010

After trying to backup my hard drive on my HP Mini 210-1054TU notebook PC, On start up the users menu comes up (A little changed) and when I sign in it comes back with a window flag that say: The configuration defaults for GNOME power manager have not been installed correctly.I can booth with a stick and see my files and directory but, I am not allowed to open any. There is no access to a terminal or anything but, the users menu. It appears to take the password as, if not right, it would say so but, only comes back with same menu and window flag.Ironic, I was trying to backup my files so I would not lose them.

View 1 Replies View Related

General :: Change Default Session In XFCE (to Gnome , LXDE)?

Jan 1, 2011

I have got Ubuntu with Xfce installed, and I would like to change default session to Gnome, or LXDE (depending on if my computer would run it properly). Looks like there is no options button while logging in, or anything similar.

View 6 Replies View Related

Ubuntu :: LTSP Global Default Session Change From Gnome To LXDE For All Users

Jun 2, 2010

I would like to make LXDE the default desktop for ALL USERS on my LTSP clients. There are about 60 users so far.On my server, LXDE is default for everyone.But on the clients, each user has to change to LXDE individually. How can I make LXDE default on all clients?I've been looking through the forums all day, but could not find an answer to this question, so hopefully we can get an answer and my title will help others.

View 2 Replies View Related

Debian Configuration :: Reboot Both The Server And The Client Machines Every Time Change The SAMBA Configuration?

Apr 5, 2010

I am *finally* getting around to rebuilding my file-sharing computer. I'll be sharing files with both Linux and Windoze machines. It's a home network, so there's nothing fancy needed. I know I have to tweak my smb.conf file until I'm satisfied with the features and security. I'm using SWAT and I'm starting with a bare-bones conf file. It's not secure but I can see the server and selected files/directories from my other Linux box.

My really dumb question is, do I have to reboot both the server and the client machines every time I change the SAMBA configuration? I thought I just had to stop and restart the SAMBA service in the SWAT software - but then the server disappears from my client. It looks like I need to reboot both machines for the client to see the server.

View 1 Replies View Related

Server :: Change CentOS 5.3 GNOME Desktop To KDE Without Effecting Others Configuration?

Feb 23, 2010

how to change CentOS 5.3 GNOME Desktop to KDE without effecting others configuration?

View 3 Replies View Related

Debian Configuration :: Varnish Not Able To Run On Non Default Port

Oct 9, 2015

On this moment i build an webenvironment with wordpress, apache2, debian 8. On this moment i try to impelement Varnish.

By default this application use the port 6081. I try to put apache on port 8080. This already works but i get varnish not running on port 80.

You can see below that varnish still listen to the default port 6081. How can i fix this?

Code: Select allroot@webI:/home/beheerder# netstat -lpt
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       PID/Program name
tcp        0      0 *:ssh                   *:*                     LISTEN      2917/sshd
tcp        0      0 *:6081                  *:*                     LISTEN      3717/varnishd
tcp        0      0 localhost:6082          *:*                     LISTEN      3699/varnishd

[Code] ....

To test another port i have also try to start Varnish on port 85.

Code: Select allvim /etc/default/varnish
DAEMON_OPTS="-a :85
             -T localhost:6082
             -f /etc/varnish/default.vcl
             -S /etc/varnish/secret
             -s malloc,256m"

I have restart the apache and varnish services. I have also rebooted the server but varnish will not listen on port 80 (or other non default ports). On port 6081 the application works fine. But how can i fix this ?

Source Varnish port 80

I can use the application with the following command

Code: Select allvarnishd -f /etc/varnish/default.vcl -a 0.0.0.0:80.

But why is this not working with the normal config file. Varnish are than listen to port 80. With every server reboot i need than to run this command. So i would like to use the config file.

View 0 Replies View Related

Debian Configuration :: Why Isn't Pciehp Loaded By Default

Jul 28, 2010

I run Debian Squeeze on my Lenovo ThinkPad W500. Today I tried to use the expresscard slot on the device and was disappointed to find that it didn't work. A bit of digging revealed that the pciehp module was not loaded (but is required for hot-plugging these kinds of devices).Can anyone explain to me why this is the case? All other hardware on my system has had the module auto-loaded on boot-up, but why not pciehp for my expresscard slot?

View 2 Replies View Related

Debian Configuration :: Default Colours In Console (no X)

Feb 13, 2011

I know that in an xterminal I can redefine the default colour with something like
!!red
URxvt.color1: rgb:cc/00/00
URxvt.color9: rgb:ef/29/29
Is it possible to do something similar in the Linux (framebuffer) console?

View 4 Replies View Related

Debian :: Change The Default Kernel To Boot

Jun 20, 2015

So far I've tried to add a number to 'GRUB_DEFAULT=', but it wouldn't want to boot in anything other than Debian or Windows, same with StartUp-Manager...

I currently have the liquorix kernels installed, but I can't get to use them as the standard Debian kernel is always picked. So is there any way to change this behaviour?

View 14 Replies View Related

Debian :: Set Default Character Encoding In Gnome-terminal?

Dec 30, 2010

I try to change the default character encoding in gnome-terminal. I want to use UTF8, but every gnome-terminal i start uses "ANSIX3.4-1968".

In the menu, when i go in Terminal => Set character encoding i have a list with two items:
[x] Current Locale (ANSIX3.4-1968)
[ ] Unicode (UTF-8)

I don't know why the first item appears, i have another debian box and it has only the UTF-8 encoding available. I cannot remove the first item in "add or remove" sub menu !! Probably because it is related to "current locale"

Here is the output of "locale", if it can helps:
boulzor@antec:~$ locale
LANG=en_US.UTF-8
LC_CTYPE="en_US.UTF-8"
LC_NUMERIC="en_US.UTF-8"

[Code]....

View 2 Replies View Related

Debian Configuration :: Default Admin Password For Ntop

Feb 1, 2016

I installed it from the packages list and the eye candy has been good.

However, in trying to fix an error showing up in syslog

Feb 1 17:37:38 host ntop[30764]: **ERROR** Buffer too short @ dataFormat.c:144 (increase to at least 56) [230982 years, 187 days 7:107374]

I started looking at the configuration files; well attempted. It asks for a login. It isn't any user or root, but apparently is admin, but IO don't ever remember setting it.

Various web search suggests it is done at compile(downloaded compiled) /installation, but I have no recollection of entering any.

There is a Redhat/Centos wrinkle ntop -set-admin-passwd=password; but that puts out a lot of lines, then hangs and has no effect.

Note, despite message(old version of ntop), it is up todate in packages.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved