i have created a wordpress user with a symbolic link from his home (/home/wordpress) to /usr/share/wordpress but when wordpress ftps to wordpress home dir it does not follow the sym-link. is there a way to set default ftp dir for the wordpress user to /usr/share/wordpress rather than /home/wordpress?
i have created a wordpress user with a symbolic link from his home (/home/wordpress) to /usr/share/wordpress but when wordpress ftps to wordpress home dir it does not follow the sym-link. is there a way to set default ftp dir for the wordpress user to /usr/share/wordpress rather than /home/wordpress?
how to change the default language of gnome.when i boot into x-window ,i can select the language ,But ,if boot into console ,via "startx" to run the w-window ,the language is english,i can't select .my native language is Chinese.i set the right locale .I also searched for it .Someone told to add "export LANG=zh_CN.UTF-8"to $HOME/.xinitrc.there's no this file in my home dicretion.I create it .after that,when i run "startx",it's failed to start x-window.the ~/.xsession-error file shows
Initializing gnome-mount extension seahorse nautilus module initialized Unrecognized number formatter: cjk-chinese-simp Unrecognized number formatter: cjk-chinese-simp
[code]...
how can i change the default language ,i have to .because if gnome is in English ,i can't run the Chines input method.
Howto change default editor by live usb-hdd creation? Normally, I can change from the command line:# update-alternatives --config editorbut howto put it into live config?
I followed these steps to add a client to my active directory domain, everything is working as expected except that when a username has whitespace it creates a directory in /home with whitespace and gconf fail to access his config dir in the user's home. KDE also fails to start but I don't know what's failing yet. I found that the easiest way to fix these issues is to replace whitespaces by underline in homepaths so I changed the pam_mkhomedir source to replace the whitespaces and save it using the usermod command. It should work but is not... the reason is that I can't change the user data using the usermod because domain users are not in /etc/passwd.
So, I just installed Kubuntu 10.04, and couldn't let things be, so I installed GNOME, and plan to install a few other desktop environments for fun later. However, when I installed GNOME (apt-get install ubuntu-desktop), I realized that KDM's default session is whatever session you used last time. I'd rather it simply be KDE, since I know I'll be using it most out of any of the others. How can I make the KDM default session be KDE, instead of whatever the previous session was?
I installed Fedora 12 LXDE spin and its default session was LXDE. Then I downloaded XFCE and tried to change the default session of GDM to XFCE. I edited ~/.dmrc and /etc/sysconfig/desktop but this didn`t change anything. I was unable to find where GDM stores its default setting.
Is there any way to change GDM default session?
And more important: is there any way to make GDM to store different default sessions for different users?
I can't change the default session on the login screen to Openbox. The only place I can see to change this in 10.04 is in the "login" settings screen. I've done that; I still get "gnome" as the default option when I go to log in.
I have got Ubuntu with Xfce installed, and I would like to change default session to Gnome, or LXDE (depending on if my computer would run it properly). Looks like there is no options button while logging in, or anything similar.
I would like to make LXDE the default desktop for ALL USERS on my LTSP clients. There are about 60 users so far.On my server, LXDE is default for everyone.But on the clients, each user has to change to LXDE individually. How can I make LXDE default on all clients?I've been looking through the forums all day, but could not find an answer to this question, so hopefully we can get an answer and my title will help others.
how to change when running command "adduser" or "useradd" the placement of the users home directory. Have tried editing the /etc/default/useradd file with no results.
I want it to be placed in /var/www And I would also want to know how more folders and files can be created in the home directory automatically.
A week ago I opened this thread viewtopic.php?f=17&t=61580 in "Board index ‹ Help ‹ Installation" and asked for a moderator to move this to here. Because it hasnt happened up to know, I am reopening the thread here. It would be reeeeally great if somebody could help me with my problem!
I own two computers, one netbook and one laptop. I want to boot my netbook as a diskless client via PXE.I set up a dhcp-, tftp and nfs-server on my laptop but when i boot my netbook, the follwoing messages are displayed:(to make it more clear, i uploaded the whole output and shortened the output below)
I'm looking to customize the environment for new users by changing the items in the GNOME menu, change the panel layout, add some shortcuts, and do a few other things. I looked in /etc/skel and there doesn't seem to be anything GNOME related in there; I also tried to put .gconf, .gconfd and .gnome2 from my home directory into /etc/skel and that didn't do what I wanted.
I'm using CFEngine 2.2.8 to configure a network of Debian servers, the servers have two interfaces eth0 and eth1, how can I configure cfagent to take as the default interface eth1? eth0 is the internal interface and eht1 is the one with the public IP, I need to define classes based on lists of public IPs and it would be really helpfull if I could use functions as IPRange that only consider IP in eth0 interface.
i installed oroborus and rox-filer and did not see an entry for either in gdm3's session chooser. i have used these window managers together before and was always able to select the session from gdm. i thought i might have to add an oroborus.desktop file to /usr/share/xsessions, but only found one in /usr/share/kde4/apps/kdm/sessions and it didn't show up when i copied it to /usr/share/xsessions. how can i get oroborus into gdm3's session chooser?
I have some errors when run the mount -all command: mount: wrong fs type, bad option, bad superblock on /dev/sdc5, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so Failed to open /proc/filesystems: No such file or directory
I am *finally* getting around to rebuilding my file-sharing computer. I'll be sharing files with both Linux and Windoze machines. It's a home network, so there's nothing fancy needed. I know I have to tweak my smb.conf file until I'm satisfied with the features and security. I'm using SWAT and I'm starting with a bare-bones conf file. It's not secure but I can see the server and selected files/directories from my other Linux box.
My really dumb question is, do I have to reboot both the server and the client machines every time I change the SAMBA configuration? I thought I just had to stop and restart the SAMBA service in the SWAT software - but then the server disappears from my client. It looks like I need to reboot both machines for the client to see the server.
On this moment i build an webenvironment with wordpress, apache2, debian 8. On this moment i try to impelement Varnish.
By default this application use the port 6081. I try to put apache on port 8080. This already works but i get varnish not running on port 80.
You can see below that varnish still listen to the default port 6081. How can i fix this?
Code: Select allroot@webI:/home/beheerder# netstat -lpt Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address      Foreign Address     State    PID/Program name tcp    0   0 *:ssh          *:*           LISTEN   2917/sshd tcp    0   0 *:6081         *:*           LISTEN   3717/varnishd tcp    0   0 localhost:6082     *:*           LISTEN   3699/varnishd
[Code] ....
To test another port i have also try to start Varnish on port 85.
Code: Select allvim /etc/default/varnish DAEMON_OPTS="-a :85        -T localhost:6082        -f /etc/varnish/default.vcl        -S /etc/varnish/secret        -s malloc,256m"
I have restart the apache and varnish services. I have also rebooted the server but varnish will not listen on port 80 (or other non default ports). On port 6081 the application works fine. But how can i fix this ?
Source Varnish port 80
I can use the application with the following command
Code: Select allvarnishd -f /etc/varnish/default.vcl -a 0.0.0.0:80.
But why is this not working with the normal config file. Varnish are than listen to port 80. With every server reboot i need than to run this command. So i would like to use the config file.
I run Debian Squeeze on my Lenovo ThinkPad W500. Today I tried to use the expresscard slot on the device and was disappointed to find that it didn't work. A bit of digging revealed that the pciehp module was not loaded (but is required for hot-plugging these kinds of devices).Can anyone explain to me why this is the case? All other hardware on my system has had the module auto-loaded on boot-up, but why not pciehp for my expresscard slot?
I know that in an xterminal I can redefine the default colour with something like !!red URxvt.color1: rgb:cc/00/00 URxvt.color9: rgb:ef/29/29 Is it possible to do something similar in the Linux (framebuffer) console?
So far I've tried to add a number to 'GRUB_DEFAULT=', but it wouldn't want to boot in anything other than Debian or Windows, same with StartUp-Manager...
I currently have the liquorix kernels installed, but I can't get to use them as the standard Debian kernel is always picked. So is there any way to change this behaviour?
I installed it from the packages list and the eye candy has been good.
However, in trying to fix an error showing up in syslog
Feb 1 17:37:38 host ntop[30764]: **ERROR** Buffer too short @ dataFormat.c:144 (increase to at least 56) [230982 years, 187 days 7:107374]
I started looking at the configuration files; well attempted. It asks for a login. It isn't any user or root, but apparently is admin, but IO don't ever remember setting it.
Various web search suggests it is done at compile(downloaded compiled) /installation, but I have no recollection of entering any.
There is a Redhat/Centos wrinkle ntop -set-admin-passwd=password; but that puts out a lot of lines, then hangs and has no effect.
Note, despite message(old version of ntop), it is up todate in packages.
I've been working on my servers, one of them is Ubuntu and the other one is Debian (Newest), and both seams to have a problem with charset configuration.
They wont register ISO-8859-1, insted it says no value when i look at it with phpinfo() function. It's importen that i feel this is working.
if you try to browse the web from the machine, or log in through a nomachine (nxclient/nxserver) session, it claims there is no internet conenction. You have to run System|Administration|Network and select the stored "Location" for our wired connection. There does not seem to be an option to make this (one and only) "Location" the default. If the machine is up and incoming connections are possible (samba & apache), surely outgoing connections should be working without extra fiddling?
The issue with nxserver (nomachine) becoming unavailable on a re-booted unattended machine (unless someone logs in AT THE MACHINE and runs System|Administration|Network) is causing problems for remote access.
after a reboot of my Lenny system, the default gateway will lost. Then i must try "networking restart" and the gatway will be set
my interfaces looks :
# This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback
So I was reading this thread on internet privacy and decided to 'upgrade' my system. I installed privoxy and tor and chained them from squid so it looks like this: iceweasel >> squid >> privoxy >> tor. All is working well except when I go to edit my privoxy default.action file I get a fatal error. I've got version 3.0.9-1 The original line in the newly installed default.action file. #+hide-referer{forge}
I edited it by simply removing the #. +hide-referer{forge} Then:su -c '/etc/init.d/privoxy force-reload'And I get this in the logfile.Sep 14 16:41:36.260 Privoxy(7f4fa64756e0) Fatal error: can't load actions file '/etc/privoxy/default.action': first needed line (361) is invalid: +hide-referer{forge} I've even copy/pasted from the manual and to no avail.Have I been looking at to much text for the last two days?What am I missing?