Debian Configuration :: Wheezy - Detect Printer On One WiFi Network But Not Other

Sep 21, 2015

I use a 'wifi hotspot' provided by my mobile (android) phone for internet/email and to connect to my wifi capable HP p1102w printer. Installation and use of the printer worked perfectly until I bought a new phone, again android with 'wifi hotspot' capability. The wifi connection on my new phone works fine for internet and email but it totally fails to detect my printer.

I have tried to detect and connect to the printer using system-config-printer and using the HP utility hp-setup. Both fail to detect the printer on the 'new' wifi network.

The old network connection which detects the printer as expected gives the following output:

Code: Select allpat@debian:~$ ifconfig
eth0      Link encap:Ethernet  HWaddr 6c:3b:e5:91:ec:0c 
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

[Code] ....

The new (problematic) network connection which fails to detect the printer gives the following output:

Code: Select allpat@debian:~$ ifconfig
eth0      Link encap:Ethernet  HWaddr 6c:3b:e5:91:ec:0c 
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

[Code] ....

View 4 Replies


ADVERTISEMENT

Debian Configuration :: Network Manager Dooesnt Detect Modem?

Jul 5, 2011

Its my liillte headache with my hsdpa modem. using wvdial i can connect to the net huawei e220l but NetworkManager is a different story. # lsusb | fgrep HuaweiBus 001 Device 010: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem / E270 HSDPA/HSUPA Modemi',m ok with wvdial and its gui wrapper(gnome-ppp) .i just would like it to be functional since my noob bro

View 2 Replies View Related

Debian Configuration :: How To Get /etc/network/interfaces To See Usb Wifi

Jun 16, 2010

I have a netgear wg111t that is running with ndiswrapper. It has an atheros chipset, but calling it ath0 didn't work.

Heres /etc/network/interface :

# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface auto lo

iface lo inet loopback

View 6 Replies View Related

Debian Configuration :: Cannot Print With HP2600n Network Printer

Jan 11, 2011

I run Debian Squeeze but I have the system installed step by step from minimal installation. So I'm not sure if I have forgotten basic packages important for printing. I open system-config-printer to add a new network printer. In the list of the Network Printers after some seconds it appears the HP Color LaserJet 2600n. I chose it and hit Forward. A new window opens that says that system is searching for Drivers and finally I'm ready for printing.

[Code]..

View 1 Replies View Related

Debian Configuration :: Squeeze Cups 1.4.4 Add Network Printer?

Feb 8, 2011

I am unable to figure out how to set up a net work printer with new squeeze installation. I have used cups ver 1.3.8 on lenny and have never had any difficulty, this new version 1.4.4 I'm unable to gain any ground with.I did a purge and re-install with no luck?

View 10 Replies View Related

Debian Configuration :: WiFi Rt73 Won't Connect To Network?

May 20, 2011

I bought a USB wireless adapter for my desktop. I finally got it to partially work using firmware-ralink as described [URL]sing network manager it will pick up my wireless network. However it will not connect to it.

The output of iwconfig is
wlan0IEEE 802.11bg ESSID:"familyfarm"
Mode:Managed Frequency:2.437 GHz Access Point: 00:1C:DF:B6:EA:B9

[code]...

View 5 Replies View Related

Debian Configuration :: Broadcom BCM4328 Cannot Find Wifi Network

Feb 7, 2010

I'm installing Squeeze on on a Dell Latitude D830 laptop with a Broadcom BCM4328 wireless network card, and I'm stuck on getting wireless internet to work. I have the 2.6.32-trunk-686-bigmem kernel. I run KDE and I have knetworkmanager installed to sort the network connections out. Unfortunately, knetworkmanager cannot find any wireless networks for eth2 (the wireless adapter). There is a wireless network, as other equipment can still connect to it.

I've installed the broadcom-sta drivers according to http://wiki.debian.org/wl. When I run iwconfig, I receive the following output: eth2 IEEEE 802.11abgn ESSID:"" Mode:Managed Frequency: 2.412 GHz Access Point: Not-Associated Bit Rate: 14 Mb/s Tx-Power:off Retry min limit: 7 RTS thr:off Fragment thr:off Power ManagementMode: All packages received Link Quality=5/5 Signal level=0 dBm Noise Level=0 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 missed beacon:0

[Code]...

View 5 Replies View Related

Debian Configuration :: Setting Up A CUPS/Samba Shared Network Printer?

Aug 19, 2010

how to get clients connecting to an office printer. during a migration from windows server to debian/samba.

We have:

5 windows XP machines one Windows Server 2003 machine, PDC of the old domain One debian Samba PDC (of TEST domain)/print server (with CUPS installeD) running in a virtual machine hosted by the windows server One Toshiba eStudio 3511 printer

Using the CUPS control panel, I've been able to autodetect and add the printer, and it appears as an available share in SWAT for samba. However, the driver isn't perfect. CUPS could only supply drivers for the 3510c, not the 3511.

However, clients on the TEST domain are unable to access it. Doing so gives an error about a local policy preventing a connection to the print queue. I've tried googling this error and the fix that comes up in every result about changing a point and print policy setting, does not work.

however, I've been able to work around the issue. by first logging in as local administrator, navigating to the domain server, then inputting the domain root account credentials at the prompt. That allows me to attempt to connect to printers, but with a different error

"The server for the printer does not have the correct driver installed...."

I very strongly suspect that the 3510 driver actually will work, but it's just not being shared properly. The printer driver share folder is /var/lib/samba/printers, and that directory contains only a few empty subfolders. CUPS did not place the driver there as I would expect, and that is where clients are looking for it.

The thing is, I have no idea where CUPS DID put the driver.

On the old domain, the printer uses drivers for es4511, and looking on the toshiba site, this seems to be what they provide. The Toshiba Site provides a huge variety of drivers, including several windows ones, a universal driver, and a CUPS PPD. Cups asks for an optional PPD during install and I tried supplying that. It said installed successfully, but didn't change anything.

I've tried pasting the windows drivers into /var/lib/samba/printers/W32X86 too, and likewise with other drivers from toshiba's site. but this doesn't change anything either, so I'm at a bit of a loss.

how to install/setup drivers on a samba PDC, for windows machines?

Also relevant, my smb.conf:
anyone see any possible causes of problems?
# Samba config file created using SWAT
# from UNKNOWN ()
# Date: 2010/08/19 13:03:07

[code]....

View 12 Replies View Related

Debian Configuration :: WiFi Connection Stuck At (Setting Network Address)

Oct 9, 2015

I have Debian 8.2 with KDE 4.14 and everything runs perfect, except for the internet connection. This problem happens randomly when I turn on my machine. Sometimes when the desktop loads, the connection is already settled.

But sometimes when the desktop loads, the wifi icon is still loading and keeps stuck at "setting network address". Since this problem happens randomly I really don't know what is happening here. My wifi chip is this:

Code: Select all01:00.0 Network controller: Intel Corporation Centrino Wireless-N 130 (rev 34)

This is the problem:

I installed Debian with non-free firmware because of this chip.

View 6 Replies View Related

Debian Configuration :: WiFi Settings - System Network Services Are Not Compatible

Nov 4, 2015

I got this message when I tried to get in WifiSettings.

"The system network services are not compatible with this version"

What should I do?

View 1 Replies View Related

Debian Hardware :: Wheezy 32-bit On Thinkpad X40 - WiFi Keeps Disconnecting

Sep 15, 2014

On wheezy 32-bit on thinkpad x40

Code: Select all# tail -30 /var/log/messages
Sep 15 11:52:12 X40 kernel: [  146.227644] cdrom: Uniform CD-ROM driver Revision: 3.20
Sep 15 11:52:13 X40 kernel: [  147.005390] UDF-fs: Partition marked readonly; forcing readonly mount
Sep 15 11:52:13 X40 kernel: [  147.017161] UDF-fs: INFO Mounting volume 'Utility_HD-PXTU', timestamp 2010/05/12 14:24 (11e0)
Sep 15 11:52:14 X40 kernel: [  147.821237] NTFS driver 2.1.30 [Flags: R/W MODULE].
Sep 15 11:52:14 X40 kernel: [  147.919521] NTFS volume version 3.1.

[Code] ....

It will be okay for awhile after I unload & reload ipw2200 driver

Code: Select all# lspci | grep -i VGA
00:02.0 VGA compatible controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)

View 2 Replies View Related

Debian Installation :: Wheezy Install 7.8.0 - Cannot Stay Connected Through WiFi

Apr 2, 2015

I love using wheezy but i keep having to take my computer downstairs to hook it up to router through ethernet, i need it to connect through wifi and stay connected.

heres my problem, if i use live image and connect to network its fine but during installation process it gets to the network configuration, it will keep disconnecting at dhcp and if i try and continue it gives me the error packages broken due to it not staying connected.

MY WIFI CARD IS A TP-LINK WDN 4800

if i try and just do a net install then it doesnt show my wifi network.

it uses in both cases ar93xx atheros driver for installing, i just need to know how i can try and keep a stable connection over wifi so it can install over wifi so i dont have to keep taking pc downstairs to install it.

i done something that stopped me being able to login into wheezy i was left at black screen with blinking command line, i have reverted to mint debian until i can get a stable connection over wifi to install wheezy again.

View 14 Replies View Related

Debian Hardware :: Can't Find WiFi Driver For MEDIATEK 7360 In Wheezy

Mar 25, 2014

I've bought a HP Pavilion laptop on which Ubuntu was pre-installed. i had to switch my OS into Debian Wheezy. But now i can't find the wifi driver for my network card. [MEDIATEK Corp. Device 7360].. I tried upgrading kernel to 3.13.6.. But couldn't make my wifi driver work....

View 5 Replies View Related

Debian Hardware :: Ralink RT2501 USB WiFi Adapter Hot And Noisy - Wheezy Freezes

Sep 14, 2014

I've just installed Debian Wheezy on my old Toshiba Satellite A10 (Intel celeron 2.20 GHz, 1GB Ram, 30 GB hard drive) and tried to connect to my home wifi network with a usb wifi adapter (Hamlet HNWU254G). lsusb in terminal says it is Ralink RT2501. Ethernet worked fine, so I installed firmware-ralink package, the adapter was recognized and I was able to connect.

However, I heard quite frequently a strange whistle and realized it came from the usb wifi adapter; it also got very very hot. Other strange thing: the computer some times freezes: screen flickering, loss of control of mouse and keyboard, need to shut down with power button.

At first I thought it was the video card not being powerful enough for Gnome (even classic), but then I installed Xfce4 and nothing changed. Instead, when working offline, freezes happen less frequently (but still happen).

I've tried the usb adapter on another laptop with wheezy: it gets hot, but there are no whistles and freezes.

View 1 Replies View Related

Debian Configuration :: Kernel 2.6.38 In Wheezy?

Apr 11, 2011

This is Wheezy x86_64. I tried two different ways to install kernel 2.6.38 on my machine and both have failed. First thing I did was to follow this guide [URL]... el-26.html) and try to compile the latest stable from kernel.org. I don't know why, but it turns into kernel panic when I try to run it. Second thing I did was to install the liquorix 2.6.38, and that also fails, seeming to boot but hanging a second short from the login. I don't know what I'm doing wrong. Is there a special way to install kernels in Debian? This is the first time I tried compiling a kernel, so it's quite likely that the problem is sitting 6 inches from the computer screen. Also, how would I remove those kernels since they're obviously not working? I know I could remove them from the grub menu but I'm not sure how to completely delete them.

View 12 Replies View Related

Fedora Networking :: Network Manager Doesn't Detect WiFi Card?

Dec 22, 2009

I just installed x64 Fedora, and as the title says, NM fails to detect my WiFi card. It's an Encore ENLWI-N with a RaLink RT2800 chipset. The card does show up when I run lspci, although iwconfig yields nothing.Not sure if this helps, but when Ias running Karmic Koala, Ubuntu detected the card immediately and required no configuration

View 2 Replies View Related

Debian Configuration :: Migration To Bind 9.10 In Wheezy 7.1

Nov 13, 2015

I want to migrate to bind 9.10 in debian wheezy. I don't want to take the source code from debian Sid since its an experimental version. So I have taken source code from official bind forum and compiled in debian wheezy. The compilation is successful but I am having problem in running the binary in debian wheezy. It's not honoring the binary even though I run it. I am not getting error messages on console but still it is not running.

I want to know whether its feasible to do this Or is it dependent on any other system libraries to make it run ?

Last few lines from Strace Dump
==============================

capget(0x20080522, 0, NULL) = 0
capget(0x20080522, 0, {0, CAP_CHOWN|CAP_DAC_READ_SEARCH|CAP_SETGID|CAP_SETUID|CAP_NET_BIND_SERVICE|CAP_SYS_CHROOT|CAP_SYS_RESOURCE, 0}) = 0
getuid() = 1007

[Code] .....

View 1 Replies View Related

Debian Configuration :: Allow Root In Ssh On Wheezy Usb-hdd LIVE

Jul 15, 2011

I try to allow root login in ssh on wheezy usb-hdd LIVE using this script in config/chroot_local-hooks:

This script was working well during squeeze usb-hdd live creation.

View 5 Replies View Related

Debian Configuration :: High CPU Temp Wheezy X200

May 10, 2015

I am noticing some rather high CPU temps while using Debian 7.8 KDE on a Lenovo X200 laptop.

Even when its not doing anything its getting as high as 70C sometimes. I opened it up and went in with a can of compressed air, it went down a little to 36C now its back to 70c the day after.

Then I realised the fan was hardly spinning is there any way I can control how much (or little) the fan spins at certain temps?

My guesses are it could be done with a bash / shell script in the kernal loaded at booting up. But am unsure.

Here is my dmesg [URL] ....

And lsmod [URL] ....

View 2 Replies View Related

Debian Configuration :: Wheezy - Can't Change Software Sources?

Apr 13, 2011

I updated to Wheezy from Squeeze and whilst I can make changes to sources.list manually, I can't do some updates in Software Sources.For instance, the 3 check boxes under "Download from internet" are all un-ticked and I can't change them if I wanted to - even though the sources.list is set up with "main contrib non-free"I cannot amend the download server either - it works out what the best server is but wont update if I tell it to.

View 9 Replies View Related

Debian Configuration :: Installing Radeon Drivers For Wheezy?

May 27, 2011

I need some help installing the driver. I am very noob. so when I try to build a deb file with sh ati-driver-installer-11-5-x86.x86_64.run --buildpkg Debian/testing

# sh ati-driver-installer-11-5-x86.x86_64.run --buildpkg Debian/testing
Created directory fglrx-install.7aYYig
Verifying archive integrity... All good.
Uncompressing ATI Catalyst(TM) Proprietary Driver-

[Code]...

View 12 Replies View Related

Debian Configuration :: Manage GNOME Keyrings In Wheezy?

Jun 8, 2011

Last week I upgraded from Squeeze to Wheezy. Everything seems to be in order, except now launching empathy will get my 4 separate GNOME keyring prompts in a row. I guess my keyring got copied for some reason, but Ican't figure out what package to install to deal with my keyrings, as gnome-keyring-manager is only in sid...

View 2 Replies View Related

Debian Configuration :: Wheezy Radeon / Intel Graphics Switcheroo?

Apr 16, 2011

I have an Acer Aspire TimelineX 4820TG. I'm running Wheezy and I can't seem to get switcheroo working correctly. I was running Squeeze, then upgraded to Wheezy because it had a kernel over 2.6.33 with switcheroo built in. Below is the layout of my build...

(~)$ uname -a
Linux skipjack-debian 2.6.38-2-686 #1 SMP Thu Apr 7 05:24:21 UTC 2011 i686 GNU/Linux
(~)$ lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18)
01:00.0 VGA compatible controller: ATI Technologies Inc Redwood [Radeon HD 5600 Series]

[code]....

View 5 Replies View Related

Debian Configuration :: Wheezy Xfce 4.8 VERY SLOW First Thunar Startup

May 16, 2011

I upgraded my main PC's Xfce 4.6 to Xfce 4.8 this morning.Now, every time I start Thunar for the first time after a new boot, it takes about 30 seconds to appear, and then about 10 seconds later, a second instance of it appears.After that, Thunar appears instantly every time I start it during that same session. But if I shut-down or restart my PC, Thunar again takes about 30 seconds to start up, and a second instance of it appears about 10 seconds later.

Google searches seem to indicate that people running other distros are also experiencing this problem. On advice in a different forum, I deleted the ~/.config/Thunar folder and restarted my PC, but that didn't help -- it created a new Thunar folder, but the long delay and the double-Thunars are still there every time I run Thunar for the first time in a session.

View 13 Replies View Related

Debian Configuration :: Wheezy I386 - No Internet Access After Uninstall Gnome

Jun 20, 2015

I'm using Debian Wheezy i386.

I've tried to uninstall gnome as below :

Code: Select all# aptitude purge `dpkg --get-selections | grep gnome | cut -f 1`
# aptitude -f install
# aptitude purge `dpkg --get-selections | grep deinstall | cut -f 1`
# aptitude -f install

And gnome successfully removed.

After reboot, system started in tty and I plugged Wired Network cable to access Internet but I have no Internet!

Content of "/etc/apt/sources.list" :
Code: Select alldeb http://ftp.au.debian.org/debian wheezy main
deb-src http://ftp.au.debian.org/debian wheezy main

Output of `ifconfig` :

View 2 Replies View Related

Debian Configuration :: Udev Static Device Change From Wheezy To Jessie

Sep 9, 2015

I am using a 3rd party kernel driver that does not support udev properly. When I was using wheezy I placed the required device files in /lib/udev/devices.

The udev in jessie does not appear to support this. Is there any way to have udev create these device files or will I have to create then using a script at boot-up?

View 1 Replies View Related

Debian Configuration :: Samba Share No Longer Auto-mounting In Wheezy

May 1, 2011

I upgraded my testing/Wheezy Inspiron N5010 to 2.6.38-2-amd64 recently (along with a bunch of other updates, of course) and now my Samba network share is no longer automatically mounting, I have to open a root terminal and do a "mount /mountpoint"; my relevant /etc/fstab entry:

I've tried over options, as well, but it isn't automatically mounting. Any suggestions (including where to file a bug report)?

View 3 Replies View Related

Debian Configuration :: Video Mode Not Supported. Nvidia Unstable(Wheezy)?

Aug 23, 2011

Recently, I installed VVVVVV and discovered that when attempting to use fullscreen mode, the monitor displays "video mode not supported" for 640x480, 800x600, 1024x768, and auto. After googling around for an hour or two (and only finding stuff from 2008-09) I have created a new xorg.conf from Xorg -configure and nvidia-xconfig. This doesn't seem to have had anyeffect.DebianRelease unstable (sid)Kernel Linux 3.0.0-1-amd64GNOME 3.0.2GeForce 7600 GSMonitor: Hyundai Imagequest

$ cat /etc/X11/xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 280.13 (pbuilder@cake) Mon Aug 8 15:37:15 UTC 2011

[code].....

View 4 Replies View Related

Debian Configuration :: Installing Wheezy Nvidia Drivers On Squeezy System?

Sep 1, 2011

I need to install wheezy nvidia-graphics-drivers because my video card (geforce GT 425m) isnt supported on the squeezy version. I downloaded the wheezy source code and built it on my squeezy system, some .deb files where created, the problem is I dont know which of those to install, these are the files:

libcuda1280.13-1amd64.deb
nvidia-glx-ia32280.13-1amd64.deb
libcuda1-ia32280.13-1amd64.deb

[code]....

View 7 Replies View Related

Debian Configuration :: Wheezy - After Update Systemd Turn Off Laptop Screen On Boot

Sep 25, 2015

I decided to update all the software on my computer. Fortunately, it upgraded kernel version 3.14 to 3.16. I was happy to learn that suspend now worked on my laptop by calling pm-suspend, but it did not worked by closing the lid. So I search and found on debian's website that installing systemd and adding some config lines in /etc/systemd/logind.conf would sove the issue. So I followed the procedure and did like instructed, to end up with a computer that boots on black screen.

The last verbrose line I see on boot up is "kvm disabled by bios" and then it shutdown down the screen. The computer works, as I can login and shutdown by doing those operation blindly.

I tried removing systemd but it still does not work. If I use the old kernel 3.14 I can boot without any problem, but if I use kernel 3.16, I boot to a black screen. I remember successfully booting in 3.16 before installing systemd.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved