Debian Configuration :: Squeeze Install - Nvidia Fan Constant?
Mar 5, 2011
I installed Debian Squeeze (choosing no when prompted to add support for non-free or contrib sources) and noticed that the fan of my Nvidia 9600 GT video card is constantly running at full speed. I thought this meant that the default driver is not properly working. I would like to configure my system so that the video card fan is not being pushed so hard.
I downloaded the latest Nvidia (propietary) driver, stopped gdm3, and ran the driver installer. The installer failed because it said the Nouveau kernel driver was currently in use and incompatible with the Nvidia driver. I chose not to allow the installer to update my modprobe configuration directory. nvidia-installer log file '/var/log/nvidia-installer.log'
[Code]...
It looks at though the xorg.conf.new file has the nv driver in use, but the Nvidia installer says the Nouveau driver is being used. I ran a line in terminal (i forget the exact line) to test the xorg.conf.new file in the /root/ directory. The result was No Screens Found.
Next, I tried to remove the xserver-xorg-video-nouveau package using aptitude, but it displayed a message indicating that xserver-xorg-video-all depends on it. I decided not to remove the xserver-xorg-nouveau package. Any suggestions on how to proceed in order to configure X with a free driver (nv, vesa, or nouveau) so that the video card is handled properly?
I am running Debian Squeeze ( kernel 2.6.32-trunk) 64-bit on this machine - "most" of the hardware can talk to Linux or vice-versa. I am, however, having trouble finding a suitable free / non-free driver to work with the abovementioned card. It would seem that this card is too "new" at the moment (February 2010).
It seems that I'm learning a bit about Debian in the last couple of days...
Here's the thing. I don't appear to be getting any 3D accelaration from my video card at the moment.
Having tried many things (which all failed) and making a mess of my computer I have done the following things:
1. Reinstalled Lenny from scratch.
2. Updated sources to point to stable and allowed update manager to do its thing.
I now appear to have a working build of squeeze.
X is up and running fine, but when I check /var/log/xorg it appears that I'm running the NOUVEAU driver, which does not support the 3D functionality of the card.
So... What is the best method for getting the appropriate driver installed?
My last attempt ended up with nvidia-glx fighting with xorg, so I'm hoping that someone will have up to date instructions that I can follow...
Nothing serious (I think), but everytime I run apt-get to remove programs and doing upgrades... I get a strange message.
This is the output of apt-get upgrade: Inspiron1525:/home/hernan# apt-get upgrade Reading package lists... Done Building dependency tree Reading state information... Done The following packages will be REMOVED: iamerican ibritish 0 upgraded, 0 newly installed, 2 to remove and 0 not upgraded. 17 not fully installed or removed. After this operation, 4030kB disk space will be freed .....
And this is the output I get when removing a program (I removed amor so I can show the output): Inspiron1525:/home/hernan# apt-get remove amor Reading package lists... Done Building dependency tree Reading state information... Done
The following packages will be REMOVED: amor iamerican ibritish 0 upgraded, 0 newly installed, 3 to remove and 0 not upgraded. 17 not fully installed or removed. After this operation, 6185kB disk space will be freed. Do you want to continue [Y/n]? y (Reading database ... 89741 files and directories currently installed.) Removing iamerican ... /var/lib/dpkg/info/iamerican.postrm: line 6: /usr/sbin/remove-default-ispell: No such file or directory dpkg: error processing iamerican (--remove): subprocess post-removal script returned error exit status 1 ..... E: Sub-process /usr/bin/dpkg returned an error code (1)
My problem is that I am trying to install nvidia drivers I got integrated card nvidia geforce 6100 nforce and amd x2x64 processor and also squeeze x64, so I downloaded the driver but when I try to top gnome I cant /etc/init.d/gdm stop it says no such file or directory So I google it and I found that squeeze has genome 3 so I put: /etc/init.d/gdm3 stop and it just appears a black screen just with a prompt but without any shell, I cant sign in debian or do anything it is just a black screen and i try ctrl+alt+f1, f12, f8, space and nothing, I can write but it doesn't response the only thing that I can do is press ctrl+alt+dell and it restart the PC. How can I stop gnome to install my drivers?
how to install Dropbox for Debian Squeeze from source.Please read everything before you begin. I prepared it as I installed Dropbox for my own system. Please Note: I use sudo, you may have to use root or 'su' from the command line. If you don't know the difference between sudo and su, then you shouldn't try this until you know. At the time I did this, the lastest dropbox version was 0.6.7.
The VirtualBox website have a 64 bit deb for installation available for AMD64 Lenny but not for Squeeze. Is it okay to install the Lenny package on Squeeze or would this cause a problem?
Using online Debian guide, installed latest nvidia-current, glx etc which seems to be 195.xx Machine boots to GUI but monitor setting menu doesnt respond nor is there an nvidia specific one. xorg.conf shows 'nvidia' driver but I suspect I am still on 'nouveau' since the synapatic package manager doesn't show an nvidia xserver-xorg-video choice.
Second question, any trailheads for using wheezy based drivers (i.e. nvidia's latest 270.xx) with squeeze?
so I just installed Squeeze Alpha1 amd64, dual boot with MS Vista using Grub. Everything seemed fine, but I'm apparently missing about 40GB of space. It should be set up as so:
101GB NTFS /dev/sda1 - Vista 12GB NTFS /dev/sda2 - HP Recovery 45GB ext3 /dev/sda3 - / Debian squeeze
I just installed Squeeze on a 4 disk system, each disk set up identically with 4 partitions, with the last partition of each disk used for a raid 5 array. I used the squeeze installer, and chose the 'manual' partition option for this setup.
After installation, fdisk reports the ending cylinder number of each of the 4 disks as one more than the total number of cylinders for the disk. I've never seen this before. In the past when I've used fdisk to manually partition disks, the final cylinder number was always equal to the total number of cylinders.
The disk has 60801 cylinders, and the 'End" cylinder number for /dev/sdd4 is reported as 60802. I would have expected it to be 60801. Is this a bug or problem? It's working OK, but I don't know if it will cause instability in the future.
# xorg.conf (X.Org X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database.
[code]...
And after that my X is not working. And when i try sudo modprobe nvidia I get this:
FATAL: Error inserting nvidia (/lib/modules/2.6.26-2-686/nvidia/nvidia.ko): No such device
I am trying to install OpenCL on Debian Jessie with a Nvidia chipset. I have installed: nvidia-libopencl1, nvidia-opencl-icd and opencl-headers based on a website instruction. When I run a test program it DOES FIND libOpenCL.so.1 ...... but does NOT FIND libOpenCL nor libOpenCL.so
I want to install the nvidia drivers from the repository (they seem quite updated lately). But i hit some issues:
# aptitude install nvidia-glx The following NEW packages will be installed: libgl1-nvidia-alternatives{ab} libgl1-nvidia-glx{ab} libglx-nvidia-alternatives{a} nvidia-glx nvidia-installer-cleanup{a} nvidia-kernel-common{a} nvidia-kernel-dkms{a} nvidia-support{a} nvidia-vdpau-driver{a}
[Code]...
Since the nvidia packages are in testing i assume they can be installed, do they?
I've built a new kernel (2.6.34) on our workstation at work. It boots and runs beautifully, but there is one minor problem. I created the kernel as a Debian package along with the kernel headers. Upon installing both and attempting to build the nVidia driver for said kernel, the installer tells me that it cannot determine the version and quits. This happens even if I manually specify the path to the headers. What's going on here, did I miss something during my compilation of the new kernel?
I'm running succesfully Debian 6.0 after first trying Debian 5.0 and ran into missing partitions. This is solved by using Debian 6.0 (Beta 2).
Now it's NVidia's turn: Under Ubuntu (yes...i know it by now...) you had to install a proprietary driver for NVidia to ensure that 3D was supported. What about Debian? There's nothing like this under Debian? How do i know if 3D is supported?
I have a set of vm's with stable, testing, and sid to keep track of how things are going. When I did an apt-get dist-upgrade with squeeze last week, things seemed to OK (350 package updates) until the end. It didn't seem to like and / or was confused by a kernel dependency.
I am not too concerned yet. Because these are in vm's, I do a snapshot before any significant change. I can futz around with impunity because I have that backup.
I re-booted, and tried the apt-get dist-upgrade again with same results. I think I also tried apt-get -f install.
So I reverted to the snapshot, and will simply try again in the future. I recall that with lenny as testing, the font-desktop was really screwed up for about a period of 6 weeks.
However, just in case someone else runs into this:
1) a re-boot worked, but the failure of apt-get made me nervous enough to revert.
2) waiting for corrections has seemed to work in the past (with a single exception with a 4-disk SCSI software RAID10 update that failed to re-boot lenny successfully after what seemed to be a minor update -- that was on a real system, not a vm. I haven't gotten back to look at that.)
I installed Debian Squeeze with no issues. I went to install latest Nvidia driver as done previously with Lenny. Used instructions that worked on lenny from "the trooper" [url]
Downloaded th latest driver for my GeForce 7300 GS vidio card, driver package NVIDIA-Linux-x86-260.19.12.run
Used "method # 2 as described in HOW TO,as it worked perfectly in the past on Lenny. Only syntax I changed was instead of gdm I typed gdm3 as it appears that is the new name for gnome in Squeeze.
Did as folows:
Now the trouble showed up, Unfortunatly I can only go off my memory. A question was asked stating that something did not match, it needed a 3 and the driver had a 4 version or somethng of this sort. then it asked if I new what I was doing (and I lied) and selected yes. And whammo, it didn't work. (This question was asked when i did in Lenny and it is working perfectly still on that system). I now can not boot to GUI, I notice when system boots it starts in "S" mode although I select normal boot from grub2.
Not too bad if I got to reinstall as little is on the system. I just want to know what I am missing on the instalation deal or should I be going about this difrently with Squeeze.
I recently just installed Squeeze on an ia64 system and was having some troubles with running VNC.I get the following error, more specifically for some reason I get a malloc - memory corruption error:
Xtightvnc(9165): unaligned access to 0x60000000001ea06c, ip=0x4000000000268280 Xtightvnc(9165): unaligned access to 0x60000000001ea074, ip=0x4000000000268280 Xtightvnc(9165): unaligned access to 0x60000000001ea07c, ip=0x4000000000268280 Xtightvnc(9165): unaligned access to 0x60000000001ea084, ip=0x4000000000268280
[code]...
After display all the code above, it just stops. The port 5901 is still closed - if it runs properly, would it open automatically?Is there something that is incompatible? Or am I missing some system configuration component?
hHey i recently installed Debian Squeeze 64bit over my Ubuntu & Windows, i got everything installed and running including all programs i need without a single problem The one thing i havent been able to do yet is install the Nvidia Driver for Geforce 8800gt, ive searched a few sites but one site is telling you to do this way and the the is telling you to do it another way then people are saying about having errors when xorg updates and stuff.
So i was wanting to know whats the easiest and best way to install the Nvidia Driver package (from nvidia website) onto Squeeze 64bit, i've done it on lenny but cant remember ow
If i get this working then il probaly use Debian as my main OS from now on.
Does this latest nVidia driver (version 260.19.12) work with the default Linux kernel in Debian Squeeze? And does it require any additional packages before installation?
(I cannot test it myself, since it's my brother who recently bought a new nVidia card)
I run the 2.6.32-5-686 kernel on Squeeze and the bad nvidia drivers. A recent update, and pardon for not noting which, broke 3d games on my box.
From a terminal neverputt yields the following error:
ignatius@lapbox 14:56 [ ~ ]:$ neverputt X Error of failed request: BadWindow (invalid Window parameter) Major opcode of failed request: 137 (NV-GLX) Minor opcode of failed request: 4 () Resource id in failed request: 0x2600013
[Code].....
I can mv xorg.conf to xorg.conf-pre and nexuiz will fire-up. Without 3d of course. I spent an hour or so last week going over my xorg.conf but it just ain't broke!
Someone else saw it, too, and reported it but his post remains alone in the thread as of 10 minutes ago. Anyone else seen this?
I don't play games much at all, but sometimes I just wanna frag muthafuckas and now I can't.
Does anyone know when or if the nvidia legacy drivers are going into Squeeze? I tried the ones in the Sid repos but ran into unresolvable dependencies. Lots of people were telling me that testing works just fine so I've been trying it out, but to be honest I've run into quite a few problems of this nature. I admit that I'm running a real Rube Goldberg mix of older and newer hardware on this box, but I wouldn't think it would be this much of a problem.
Having been using squeeze on my primary system for some time, I decided to install it on my media center PC. After doing a clean install I lost sound (another post) and my maximum video resolution dropped to 1280x1024. I was previously getting 1920x1080 (native) resolution under lenny on this box. So it's a mystery to me why I'm not getting that now. As you can see, the nvidia module is loaded:
It was no surprise that I needed to reinstall the nvidia driver after a 2.6.32-5-686 kernel update a couple days ago, but I was surprised that it didn't work. I've had to drop back to a kernel I compiled a few weeks ago, which is basically the stock 2.6.32-5-686 from that time, with a timer frequency of 1000 and desktop preemption. Vid card is GeForce PCX 5750 Using NVIDIA-Linux-x86-173.14.22-pkg1.run
This is the command I used: env CC=/usr/bin/gcc-4.3 sh NVIDIA-Linux-x86-173.14.22-pkg1.run (After it didn't work, I ran it with --uninstall and tried installing again. No luck with that.)
Here's the nvidia installer log (sorry about the encoding. I don't know what happened with that): [URL] rivafb, nvidiafb and rivatv are not loaded.
I don't see it in this one, but on a previous attempt, I saw an error message that said no nvidia graphics card was found. I've been suspicious that the card is slowly dying, based on problems like gray blocks on the screen or (in an older lenny install) persistence of the contents of a window appearing inside a terminal, when I switch desktops from the one where the browser is open to the one where the terminal is open. Scrolling the artifact off-screen and back, or window-shading the terminal and then un-shading it causes it to re-draw correctly.
I installed Firestarter firewall on debian Squeeze.Now i note there is a gui available in System->Administration which apparently does not need to be running all the time - its not set up to start on boot.When I boot I notice the boot message has a line saying "Starting Firestarter firewall .... failed"When I am logged in and type "/etc/init.d/firestarter status" as the Firestarter FAQs say, I get"Firestarter is running... ... (warning)"I can run the gui manually and still same message.
When I activate Tor in Iceweasel, it forbids me access to the internet completely. Even attempting Google results in "Iceweasel is configured to use proxy server that is refusing connection".
I have seen this in Lenny, too - it was caused by activating Tor without having installed privoxy. I installed privoxy and everything was okay. In Squeeze, Tor is using polipo. Polipo is installed and running. I have not played with settings of polipo or Tor, the configuration is the same as it was after installation.
What can be wrong? I am a rather an user than a networking guru. I am connected to internet by means of DHCP, no local lans, no special routings, no additional proxies. I have already tired to reinstall polipo.
When i was using windows it shows up and works, so thus it has to have the hardware onboard and the support for it sans the driver. It's incapable of working, i don't know why but it's not listing it, and it's just not working with it. I've tried a million times before to find a fix and they only have them for the desktop drivers and not the mobile ones. I was glad to see that i could finally use a second monitor correctly in linux now but the hdmi audio thing is driving me loopy and there doesn't seem to be anyone else who has posted with this issue before.
[list=] aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: ALC663 Analog [ALC663 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0