Debian Configuration :: Samsung VGA Monitor With GT 730 - Can't Set Correct Resolution
Jul 26, 2015
Debian Stable LXDE
Samsung LD190N
NVIDIA GT 730
Trying to set to native resolution of 1360x768 with error "Failed to get size of gamma for output default":
Code: Select allerik@DRAGON:/var/log$ xrandr
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 640 x 480, current 1024 x 768, maximum 1360 x 768
default connected 1024x768+0+0 0mm x 0mm
1024x768 61.00*
800x600 61.00
[Code] ....
Found these lines in /var/log/kern.log stating "unknown Kepler chipset":
Code: Select allJul 26 17:35:34 DRAGON kernel: [ 15.510099] nouveau ![ DEVICE][0000:03:00.0] unknown Kepler chipset
Jul 26 17:35:34 DRAGON kernel: [ 15.510148] nouveau E[ DEVICE][0000:03:00.0] unknown chipset, 0xb06070b1
Jul 26 17:35:34 DRAGON kernel: [ 15.510191] nouveau E[ DRM] failed to create 0x80000080, -22
Jul 26 17:35:34 DRAGON kernel: [ 15.510419] nouveau: probe of 0000:03:00.0 failed with error -22
Google search yielded this bug, which affected GT 730 graphics cards, apparently patched in Linux 3.19:
[URL] ....
Assuming this is the problem, does this mean I have to upgrade to Testing or install proprietary drivers?
I am running Ubuntu 9.10 on a new HP PC (Pavilion p6240f PC).This came with an Intel GMX X4500 Integrated graphics.My monitor is Samsung SyncMaster 2333. Initially I got a very bad resolution, Later I edited /etc/X11/xorg.conf (created the file) and added the following.
I tested OpenSuse 11.4 as a guest OS via virtualbox on a win7 32bit host. Output to my 16:9 screen was perfect with a plentiful choice of high resolutions. Now with Suse (32 bit) properly installed as the host the only resolutions are 1024X768 and below and I am stuck with 4:3 ratio. My PC is an Intel Atom D945GCLF2 which has integral graphics. The monitor is the VGA input of a Samsung TV.
About three weeks ago I bought a new PC and installed Debian Squeeze. I have a Samsung SyncMaster 2494hs monitor connected to it. Until about an hour ago the monitor resolution was 1920x1080 and there were no problems. Anytime I clicked on system -> preferences -> monitors, the monitor preferences displayed the monitor name (Samsung whatever) as well as the resolution (1920x1080). An hour ago I did my normal daily upgrade via synaptic (synaptic -> mark all upgrades -> apply). When the upgrade were finished, the system indicated that a restart was required, so I restarted.
After the reboot, my monitor's resolution is set at 1152x864. System -> preferences -> monitors shows the monitor name as unknown and the max resolution available is 1360x768. Xrandr shows the max available resolution as 1360x1360, which is obviously wrong. According to discover I have an ATI graphics card. I've also run ddcprobebut that outputs about 15 lines and then stops with edidfail. I do not have an xorg.conf on my system or, if I do have one, it is not in /etc/X11.
I've just bought a new monitor - Viewsonic VA2213w and am trying to set it up with Lucid. The resolution required is 1920x1080 @ 60Hz. I have an NVidia GTS250 with the proprietary driver v195.36.24 installed. I can set the right resolution in the nvidia-settings app, but it will not survive a restart. X always reverts to 1024x768. I have manually edited xorg.conf now to try to force the mode. The GDM login screen displays at the correct resolution, but on logging in X changes the resolution. Xorg.0.log shows the resolution being correctly set to 1920x1080 initially, then right at the end for some reason it is reset to 1024x768.
xorg.conf Code: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 1.0 (buildmeister@builder75) Thu Apr 22 11:45:35 PDT 2010 # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 1.0 (buildmeister@builder75) Thu Apr 22 11:44:23 PDT 2010
I have two displays: my main being an Apple Cinema Display (1920x1200), and my secondary being a Compaq W17q (1440x900). Previously all applications saw the secondary fine, being able to detect its name, native resolution, refresh rate, and so forth. But today, for no reason, after going into nvidia-settings the display is now being called "CRT-0" with only 4:3 resolutions available (1024x768 being the highest).
So now I'm stuck with the wrong resolution on my second monitor. All I can guess is that something more integral in Fedora is no longer able to read the EDID in it or something (I say integral as it's not just nvidia-settings, its everything, not to mention my install of Win 7 still reads the display A-OK)? Maybe I could just force the 1440x900 resolution? If so, how? Everything I've tried so far has either had no effect or resulted in glitch city.
I recently got a computer and installed the ubuntu 10.04 beta on it. I'm having issues getting my monitor to display at the correct resolution. It should be displaying at 1440x900, but the highest resolution I can select from the displays configuration panel is 1366x768, which is not even the correct aspect ratio.
lspci: Code: 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 12) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 12) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:16.2 IDE interface: Intel Corporation 5 Series/3400 Series Chipset PT IDER Controller (rev 06) 00:16.3 Serial controller: Intel Corporation 5 Series/3400 Series Chipset KT Controller (rev 06) 00:19.0 Ethernet controller: Intel Corporation 82578DC Gigabit Network Connection (rev 06) 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) 00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 06) 00:1c.6 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 7 (rev 06) 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a6) 00:1f.0 ISA bridge: Intel Corporation 5 Series Chipset LPC Interface Controller (rev 06) 00:1f.2 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA IDE Controller (rev 06) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06) 00:1f.5 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 2 port SATA IDE Controller (rev 06) This is the whole thing, in case it helps.
From what I have read, this is a brand new chipset with the GPU built into the main CPU, as if it were another CPU core. Is there a driver for this yet, or do I have to deal with an improper resolution?
FINALLY got my personal server up and running again after my GPU's fan died. i rigged a new fan/heatsink on it but i can't seem to get the resolution correct. nvidia-settings (version 195.36.31) says 1280x960 but i have to pan around the entire desktop (like having a huge image zoomed in on a small screen).
I recently built a new computer and moved over my old graphics card, a nVidia GTX 275. Everything appeared to work fine, it booted with no drama etc.
I use my computer for work and gaming, all my work, web browsing, chat etc happens on Debian. I play games on Windows 7.I did a fresh Debian install on this box and everything went smoothly until starting xdm for the first time, it wouldn't go to a higher resolution than 640x480. I'd already installed the proprietary nVidia drivers and they appeared to be working fine, just at the wrong resolution.
I'm using two screens where one Is cheep Denver TV screen with DVD player. I have just install Jessie on my PC. Before i had Windows and there was no problems finding correct resolution for this screen. Now Jessie recognize it as Unknown and the maximum resolution I can set is 1024x768 what is way to small even for this screen. At Windows resolution was something over 1200px wide. The worst thing about it is that this resolution stretches the display really ugly. You may think I'm making big deal of nothing but for me it is actually a deal. I'm graphical designer and I need to see display as it is.
I installed Squeeze with LXDE on my old 600MHz Celeron, 256MB ram computer. But, every time I boot, the screen resolution is wrong. I can set it right with a few clicks of the mouse, but next time I boot up it has reverted to the wrong setting. I found that this problem has been reported on the LXDE forum, but the official response seems to be that it is not their problem.
I just set up my dad's pc with Debian Sqeeze. It runs perfectly fine and after trying a lot of distro's Debian is the only one that will not crash or freeze up X. Now we're forced to using my own 17" monitor instead of his 19" wide screen since the max res is 1280 x 1024 in Sqeeze. What he needs is 1360 x 768. I found out in the wiki that xorg.conf needs to be edited. Since the file does not exist it needs to be created by running "Xorg -configure" in tty after stopping GDM. when running the "Xorg -configure" command this is the output;
" vmware: Please ignore above "FATAL: Module vmwgfx bot found." (++) Using config file: "/root/xorg.conf.new" (==) Using system config directory "/usr/share/X11/xorg.conf.d" Number of created screens does not match number of detected devices. Configuration failed. "
It's an Intel Sandy Bridge integrated graphics chip. I've tried running "Xorg:1 -configure" as mentioned in a forum but that simply gives me a "unknown command" answer.
I am running kde 4.4 in virtualbox , but cannot create xorg.conf to get a correct resolution. X -configure = segfault. Older releases were fine - lenny, even ubuntu hardy / lucid.
my environment :1.Debian 5 Lenny,2.LXDE,now my USB mouse behaviour is so strange as the following:1. when single click on the Start, then the Menu pops-up in very short time, it soon disappears. --------- what I get is my single click does not work here.2. when single click on the Terminal Shell or any Folder else, it will pop up two of them. ------------- what I get is that behaves like double click on those targets.3. when I open Iceweasel Browser for web surfing, when clicking on the Menus, none of them gives me response. and in web page which I opened, right-click in the context, nothing happened. --------what I get is that right click does not response.I tried some steps on configuration on X.org conf file under /etc/X11/xorg.conf, according to the results what I googled.... but there is still no outcomes till now.
The first thing that comes to my mind is to add (copy) the script in /etc/init.d and the /etc/rc* directories by hand. Debian's automatic handling of init scripts on package install/removal is quite nice, so I tend to shy away from making any manual changes if there's an automated way to do it. Which leads me to the question: is there an official way to run a second instance of a daemon? (Tried google, didn't find much more than a bug report).
I have a fresh installation of Debian 7.8 on my Dell Precision notebook. Somehow I failed to configure Xorg in a proper way. I do have X up and running, but I can not change my monitor resolution. Here is my graphics card.
I tried to follow suggestions from Debian Wiki, somehow nothing really worked (https://wiki.debian.org/AtiHowTo)
Code: Select all# aticonfig aticonfig: No supported adapters detected Code: Select all# X -configure Terminated with an error, below is the Xorg.0.log file Code: Select all[ 227.953] X.Org X Server 1.12.4
This is a fresh install of stable Debian: root@ngaio:/home/murray# uname -a Linux ngaio 2.6.32-5-amd64 #1 SMP Wed May 18 23:13:22 UTC 2011 x86_64 GNU/Linux The monitor is an AOC F19s - fairly standard 19" widescreen LCD. The graphics is running off the mother board: Intel Graphics Media Accelerator X4500 (supposedly this supports up to 2048x1536)
Gnome has three basic resolutions available, the best is 1024x768 but it still makes my pictures look fat. The optimal resolution for my monitor is 1366x768 (ie widescreen). I have hunted through lots of posts and tried creating an xorg.conf file and specifying this mode, however when I did that the Xserver simply didn't start. I then tried a few different combinations, however I was pretty much swatting mozzies with the lights off. I deleted my xorg.conf attempt and it's back to 1024x768 and I'm stumped.
[Code]...
I know these resolutions are painful to work out, so if you don't have much time perhaps you could point me at a website or document that explains how to configure xorg.conf correctly?
I've a Samsung SyncMaster 943, widescreen I also have a GForce 8400 GS This monitor supports (as seen on website) a 1440*900 resolution. I've installed the nvidia driver (from homepage) with version 195.36.24 The NVidia X Server Settings shows only a 1360*768 as max possible resolution. So, I've edited xorg.conf, restarted PC but got no luck... here it is my xorg.conf
I installed a GIMP plugin (David's batch processor gimp) and a lot of packages got updated in the process.
The monitor resolution dropped significantly and going to applications -> system tools -> preferences -> settings -> display gives me the message 'could not get screen information' my webcam and microphone is not recognized anymore either ALT + TAB does not change between open windows. power off does not work. I have to shutdown the system using the command line.
The GUI has changed a lot as well. new color schemes (that I don't really like) file system manager has a completely new look too.
it is very strange. My GRUB screen is still in the old resolution. when the system boots up at some point the resolution changes to the lower resolution.
debian version Code: Select allwim@debian7vaio15:~$ lsb_release -da No LSB modules are available. Distributor ID: Debian Description: Debian GNU/Linux 8.1 (jessie) Release: 8.1 Codename: jessie
I keep failing at properly configuring my frame buffer.My laptop screen has a resolution of 1440 x 900, so I want 0x036b throughout the whole boot process.However, with my present configuration I have 1440x900 in the grub2 menu and the subsequent 2 seconds, while it displays "Loading Linux 2.6.32-5-amd64"(I reckon this still belongs to grub).
I have an HTPC mini computer, in which I've just installed Ubuntu 10.4 Lucid Lynx, and I tried all screen resolutions I could possibly use through the settings. And the top, bottom, left & right hand sides are out of the resolution. So for example the top and bottom taskbars are out of the screen. I'll be posting a photo later on today to show you people exactly what I mean. So that I can have Ubuntu's screen would fit all inside my LCD screen ? The HTPC runs an nVidia graphics card.
I am experimenting with installing a bare minimum, network capable installation of Debian Squeeze. Right now, I am having trouble getting proper host name resolution. I have provided the output of ping (which is able to resolve names), wget (which is unable to resolve names), and the contents of the files I believe to be relevant to the problem. When I installed Debian, I installed *only* the SSH Server from the list of available configurations. Since then, I have installed mdns4, dnsmasq, mdns-scan, and libnss-mdns to get name resolution to work with no success so far. All packages were installed with no recommends -- aptitude -R package name. What am I missing to get host name resolution working?
I'm running Debian squeeze on an old IBM laptop with Radeon Mobility 7500 graphic card.In the kernel 2.6.32-5 there is always a little white line at the bottom of the screen.It begins to appear after the font size changes during the boot process.It does not appear in older kernels.
I am using Centos 5. I got one error unexpectedly after some configuration for rsync and folder settings. The error i am getting is "Serve Authorization directory (daemon/ServAuthDir) is set to /var/gdm but does not exist. Please correct the configuration and restart GDM." after rebooting.
I tried to resolve the issue by setting permission for folder /var/gdm to 755. but the problem is still not resolved.
I recently set up Kubuntu for my parents, and its working fine, other than the screen resolution. When I log in, it uses 800x600 when it should be using 1280x1024. I've tried to generate/ edit xorg.conf, but Kubuntu doesn't seem to pay attention to it. Also, I don't know if it matters, but it seems to be detecting a second screen that doesn't exist (see picture). That "monitor" can only go up to 800x600, but when I disabled it, it stayed off. When it was on and I pressed identify monitors, however, it put both labels on the main monitor. Here's the picture of the two monitors:
Motherboard: M2N-MX with Athlon X2 3600 from 2006 onwards 00:0d.0 VGA compatible controller: nVidia Corporation C61 [GeForce 6150SE nForce 430] (rev a2) Kernel: Debian Sid with 2.6.32-5-amd64 and custom 2.6.36-rc7 Monitor: Samsung 712N, 17inch, with native 1280x1024 resolution
Everything was fine with both kernels with custom 1280x1024 resolution upto yesterday. But when I rebooted today, first I noticed that X stopped working. After updating xorg.conf to 1024x768, it started working . After going through the kernel log in /var/log/messages, I noticed the following differences
Yesterdays log:
nouveau 0000:00:0d.0: Detected 64MiB VRAM nouveau 0000:00:0d.0: 64 MiB GART (aperture) nouveau 0000:00:0d.0: Saving VGA fonts
[code]....
There is an extra "Load detected" line and the resolution got reduced from 1280x1024 to 1024x768.
I've been scouring the internet for an answer to this problem. I am using Squeeze and have properly configured Grub2 to set my console screen resolution to 1024x768x32 (as per updating /etc/default/grub to contain 'GRUB_GFXMODE=1024x768x32' and updating /etc/grub.d/00_header to contain 'set gfxpayload=keep') and everything works wonderfully. My resolution is set as it should be. However upon installing Xorg (aptitude install xorg ratpoison), my console resolution gets changed to what appears to be 1280x1024.
I thought that this was due to xrandr, however when I issue:
# xrandr -s 1024x768
only the X resolution is changed. When I then CTRL-ALT-F1 back to the console, the resolution is still at 1280x1024 (I am aware that xrandr only affects X, but I assumed that because my console resolution was correct before installing X there might have been some correlation).
I would like for my console resolution to stay at 1024x768 as per Grub2's configuration and for X's resolution to be at 1280x1024.
PS I also noticed that prior to installing Xorg, my CPU boots up without any screen blanking (only for a second or so). However, after installing Xorg, during the boot process the screen does blank briefly. It is at that time that the resolution gets changed to the 1280x1024 setting.