Debian Configuration :: Privoxy Not Working

Mar 5, 2016

I am at a loss as to what to do to get Privoxy working. I have tried it using Ice Weasel and Konqueror and end up with the same problem: after I set the configuration in the browser, I cannot access anything on the internet.

View 6 Replies


ADVERTISEMENT

Debian Configuration :: - Privoxy Default.action Syntax?

Sep 15, 2010

So I was reading this thread on internet privacy and decided to 'upgrade' my system. I installed privoxy and tor and chained them from squid so it looks like this: iceweasel >> squid >> privoxy >> tor. All is working well except when I go to edit my privoxy default.action file I get a fatal error. I've got version 3.0.9-1 The original line in the newly installed default.action file. #+hide-referer{forge}

I edited it by simply removing the #. +hide-referer{forge} Then:su -c '/etc/init.d/privoxy force-reload'And I get this in the logfile.Sep 14 16:41:36.260 Privoxy(7f4fa64756e0) Fatal error: can't load actions file '/etc/privoxy/default.action': first needed line (361) is invalid: +hide-referer{forge} I've even copy/pasted from the manual and to no avail.Have I been looking at to much text for the last two days?What am I missing?

View 1 Replies View Related

Slackware :: Src2pkg Installing Privoxy / Build A Package Of Privoxy With Src2pkg?

Apr 15, 2010

In INSTALL I can see:

Quote:

to build from either unpacked tarball or CVS source:

autoheader
autoconf
./configure # (--help to see options)
make # (the make from GNU, sometimes called gmake)
su # Possibly required
make -n install # (to see where all the files will go)
make -s install # (to really install, -s to silence output)
code....

I think that trouble is in autoheader. I don't now does src2pkg (2.1) support it.Is it impossible to build a package of privoxy with src2pkg?

View 9 Replies View Related

Debian :: Privoxy Is Refusing All Connections?

Feb 3, 2011

Since I cannot upgrade Adblock Plus anymore because iceweasel is too out of date for the new versions, I am trying to give privoxy a try. I am following the howto Block Ads & Fast Caching w/Privoxy +Squid without success. I am always receiving the error:The proxy server is refusing connectionsIceweasel is configured to use a proxy server that is refusing connections.Check the proxy settings to make sure that they are correct.

I added these lines to /etc/privoxy/config
enable-remote-toggle 1
enable-edit-actions 1
permit-access 127.0.0.1

Moreover, I have edited the /etc/hosts file to block urls providing adverts and anything I wanted rejected.

View 7 Replies View Related

Debian Configuration :: Get The Windows One Working Again - Grub Configuration

Oct 3, 2010

I was trying to get the Windows one working again. Here's what fdisk -l reads:

[Code]...

I'll change these or do some grub configurations, if anyone knows what ones can work.

View 1 Replies View Related

Debian Configuration :: No GUI Working On 2.0Ghz G5 Ppc

Jul 6, 2015

I have install Debian 8.1.0 powerpc on a G5 2.0Ghz mac. It boots into a patchy square colour screen with no GUI. I am thinking there is a graphic driver problem so used (control +alt+f1) to enter the terminal and get the information below also tried to install nvidia-current but did not work. Have read that I need to blacklist nouveau drivers but don't know how this is done.

Graphics Card
[0300] : NVIDIA Corporation NV43 [Geforce 6600] [10de:0141] (rev a2) (prog-if 00 [VGA controller])

Computer
cpu PC970MP, altivec supported
clock : 2000.000000MHz
revision :1.1 (pvr 0044 0101)
timebas :33333333
Model owerMac11,2
machine owerMac11,2
motherboard owerMac11,2 MacRISC4 Power Macintosh
detected as :337 (Powermac G5 Dual Core)

View 3 Replies View Related

Debian Configuration :: Getting NFS Server Working

Jul 20, 2015

Debian Jessie on a raspberry pi 2

I'm trying to get nfs server working at boot up and it isn't starting because it says portmapper isn't running. I've read through a bunch of documentation on this and have gotten to the point that if the documentation tells me to Code: Select all$ apt-get install nfs-kernel-server portmap I usually stop there as it is outdated. I cant find a process doc that utilizes rpcbind. So, here is what I've done on my own:

setup /etc/exports with a proper nfs dir and exportfs it
Code: Select all$ apt-get install nfs-common nfs-kernel-server
$ sysv-rc-conf
---│ nfs-kerne$  [ ]     [X]     [X]     [X]     [X]     [ ]     [ ]     [ ]        │
---│ rpcbind     [ ]     [X]     [X]     [X]     [X]     [ ]     [ ]     [ ]        │
$ service rpcbind start

[Code] ....

The errors however don't seem critical as I'm able to mount the exported directory. OK so it appears to me that nfs server is working. However through a boot, the nfs-kernel-server and the rpcbind services are not starting. The nfs-kernel-server didn't start because rpcbind wasn't running. So I start rpcbind and then nfs-kernel-server and then nfs server works. So what am I missing? Why will rpcbind not start at boot?

View 3 Replies View Related

Debian Configuration :: Not Able To Get Internet Working

Jul 28, 2015

am not able to get internet working, am using debian testing. Dunno what is the issue. Here's the lowdown on /etc/network/interfaces :-

Code: Select all# This file describes the network interfaces available on your system# and how to activate them. For more information see interfaces (8)

#The loopback network interface
auto lo
iface lo inet loopback

auto eth0
allow-hotplug eth0
iface eth0 inet dhcp

I tried all the usual :-
Code: Select all$ sudo dhclient (this usually worked/works)
$ sudo ethtool eth0
$ sudo systemctl restart networking

[code]...

View 2 Replies View Related

Debian Configuration :: Ssh X11forwarding Not Working

Aug 18, 2015

I recently installed Debian 8 on my workstation , witch before ran ubuntu 15.04 , but after Debian 8 came, I have not succeeded running ssh with X11forwarding.

case is:

I have a server running ubuntu 14.04 , and when I login that server from my laptop ( also ubuntu 14.04 ), I have no problem getting x11forwarding working, but if I try login from my debian8 workstation, I'll get this error when trying to run xterm ( output is from ssh -X serverip )

connect /tmp/.X11-unix/X0: No such file or directory
xterm: Xt error: Can't open display: localhost:12.0

a ls show that the file exsist

$ ls -la /tmp/.X11-unix/X0
srwxrwxrwx 1 root root 0 Aug 18 17:53 /tmp/.X11-unix/X0

In the servers sshd_config i have the following options enabled

X11Forwarding yes
X11UseLocalhost yes ( i have tried both yes and no here )
X11DisplayOffset 12

and my ssh_config on my debian8 I have the following lines enabled

Host *
ForwardAgent yes
ForwardX11 yes
ForwardX11Trusted yes

As I see it with a 'ssh -vv -X serverip' all x11 debug messeage i the same both on my working laptop , and nonworking are the same, and ~/.Xauthority get created on the server when i login

The following env variables are set when i log into the server from my laptop ( some var is omitted )

SSH_CLIENT=1.1.1.1 59061 22
SSH_TTY=/dev/pts/1
SSH_AUTH_SOCK=/tmp/ssh-qHuaV5m5QO/agent.32572
LANGUAGE=en_US:en
LOGNAME=xxx
SSH_CONNECTION=1.1.1.1 59061 2.2.2.2 22
DISPLAY=localhost:12.0

The following env variables are set when i log into the server from my debian8 workstation (some var is omitted)

SSH_CLIENT=3.3.3.3 59148 22
SSH_TTY=/dev/pts/1
SSH_AUTH_SOCK=/tmp/ssh-fwG6aBA4he/agent.32763
SSH_CONNECTION=3.3.3.3 59148 2.2.2.2 22
DISPLAY=localhost:12.0

All tests are done with ssh -X serverip , and firewall are disabled.

Also I have attached output from ssh -X -vvvv serverip from my debian8 workstation

View 0 Replies View Related

Debian Configuration :: KVM / WebVirtMgr Not Working?

May 3, 2016

I've installed KVM and Webvirtmgr on a new install of Jessie

Code: Select all Linux CPCDEVKVM01 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt25-2 (2016-04-08) x86_64 GNU/Linux

This machine has 16 GB of RAM and a Intel(R) Core(TM) i7 CPU 870 @ 2.93GHz, anyway

when I try to
Code: Select allsudo service libvirt-bin restart

I get:
Code: Select allFailed to restart libvirt-bin.service: Unit libvirt-bin.service failed to load: No such file or directory.

View 2 Replies View Related

Debian Configuration :: SSH, Ping And ARP Not Working As They Should

Mar 13, 2010

i am running debian testing and the last few days i was trying to ssh to another pc on my network and i was getting an error like there was no machine with that ip! then i tried pinging to it with no luck! ARP was the only tool that returned the MAC address of the machine and that is strange i think. i realised then that i could only ping the gateway and localhost (127.0.0.1 not my ip). after editing my /etc/hosts, i could ping my ip as well. what is so wrong? here are some useful things:

my new /etc/hosts:
jack@debian:~$ cat /etc/hosts
127.0.0.1 localhost
127.0.1.1 debian.local debian

[Code].....

View 1 Replies View Related

Debian Configuration :: Vsftp Log Not Working?

Jun 16, 2010

I work in a company and we have problems on our server so i decided to investigate.
I found first that we don't have any ftp logs. We use vsftpd and i tried unsuccessfully to configure it to write the logs.

So here i am: - vsftpd doesn't have any logs (no vsftpd.log file in /var/log/)

I added the following lines in the vsftpd.conf :
syslog_enable=YES
log_ftp_protocol=YES
xferlog_enable=YES
vsftpd_log_file=/var/log/vsftpd.log

[Code]....

I also took a look at vsftpd process : it is owned by a user called "nobody" and a user called "www-data" when i upload or download files.

Is it a problem of permission on the log file ?

View 4 Replies View Related

Debian Configuration :: HP Media Bar Not Working

Jul 4, 2011

I would appear that I recently installed linux-image-2.6.32-5-amd64. Since then I have noted that my HP media bar up top doesn't work. This means I can't enable/disable wireless. From an lspci output, it still sees the hardware, and it's loaded, however, not functioning. Should I be looking at rolling the kernel back, or work on getting it working via some other means? Any liveCD I've tried doesn't seem to be able to get it going either. So I'm under the assumption here it is the kernel version, and not a hardware problem.

lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c)
00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c) .....

Also tried this to no avail:
sudo apt-get install rfkill
rmmod iwlagn
rfkill block all
rrfkill unblock all
modprobe iwlagn
rfkill unblock all
ifconfig wlan0 up
SIOCSIFFLAGS: Unknown error 132
rfkill list
2: phy2: Wireless LAN
Soft blocked: no
Hard blocked: yes

View 5 Replies View Related

Debian Configuration :: WiFi Stops Working

Jun 28, 2015

In a hp pavilion 15 Notebook PC with Debian 8.1.After two hours or so wifi stops working. Network-manager does not give any indication of failure but some times a yellow question mark.

rfkill list wifi gives:
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
ifconfig gives:
eth0 Link encap:Ethernet HWaddr 8c:dc:d4:7b:c2:0e
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:3994 errors:0 dropped:0 overruns:0 frame:0
TX packets:3661 errors:0 dropped:0 overruns:0 carrier:0

[code]...

View 9 Replies View Related

Debian Configuration :: CIFS Stopped Working

Oct 28, 2015

I have a debian box connected to a windows storage server.

For a number of years I have been using CIFS to connect, and now it seems to have stopped working.

Code: Select all~# mount -t cifs //192.168.97.66/sharefolder/ /localfolder -o rw,file_mode=0666,dir_mode=0777,username=NASuser,password=**** -vvv
mount: fstab path: "/etc/fstab"
mount: mtab path:  "/etc/mtab"
mount: lock path:  "/etc/mtab~"
mount: temp path:  "/etc/mtab.tmp"
mount: UID:        0
mount: eUID:       0
mount: spec:  "//192.168.97.66/sharefolder/"

[CODE]

View 4 Replies View Related

Debian Configuration :: Macchanger On Boot Not Working

Nov 12, 2015

I've installed macchanger and choosen the "run on boot" option. But it doesn't work.

Dump of /var/log/macchanger.log:

Code: Select alldisabled in /etc/default/macchanger
disabled in /etc/default/macchanger
disabled in /etc/default/macchanger
disabled in /etc/default/macchanger
disabled in /etc/default/macchanger

[Code] .....

If I change to ENABLE_ON_POST_UP_DOWN=true then I get this log-output after reboot:

Code: Select allIFACE = --all
/usr/bin/macchanger: unrecognized option '--all'
GNU MAC Changer
Usage: macchanger [options] device

[Code] ....

Report bugs to [URL] ....

Guess its some bug about the interface, but how do I change it?

View 0 Replies View Related

Debian Configuration :: WiFi Not Working On HP Omen 15

Apr 17, 2016

I am new to linux and decided to use Debian. I installed it on my laptop and have a few problems.First one is my WIFI.

Laptop type: HP Omen 15
Wifi adapter: Intel Wireless 7260n
rfkill list output:0: hci0: Bluetooth
Soft blocked: yes
Hard blocked: no
So wifi is not displaying
Kernel: 3.16.0-4-amd64
Debian version: 8.4
gui: LXDE
URL....

But they see in rfkill list the adapter.How to make this adapter work?I did this with no result:

nano /etc/modprobe.d/blacklist.conf
in file add:
#Fixing a bug that prevents wifi from working on HP Omen
blacklist acer_wmi

I would like to learn more about Linux, but before experimenting I need a working system. The plan for me is to run this as my native machine with vms on top of it with other OS.

View 12 Replies View Related

Debian Configuration :: CUPS Not Working In Squeeze?

Jul 6, 2010

I don't print much, but tonight needed to print and found that none of the printers were listed in Okular or Openoffice, then when I tried to open Cups Administration http://localhost:631/ I got the error message Connection to Server Refused

View 4 Replies View Related

Debian Configuration :: GCC Not Working In Fresh Lenny

Aug 13, 2010

I just did a regular install of debian lenny on a stand-alone machine. Now I want to add some new mp3-software. Debian doesn't like it if I install as root. A regular gets other negative results:

wlff@debian:~/My_Apps/mpg321-0.2.12-1$ ./configure
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... no
checking for gawk... (cached) mawk
checking for gcc... no
checking for cc... no
checking for cc... no
checking for cl... no
configure: error: no acceptable C compiler found in $PATH
See `config.log' for more details.
wlff@debian:~/My_Apps/mpg321-0.2.12-1$

I did find the GNU-compiler in /usr/lib/gcc. So what could be wrong with gcc, and what about gawk, cc and cl?

View 6 Replies View Related

Debian Configuration :: Wireless Not Working With Sid And New Device?

Dec 8, 2010

The computer networking works fine with a normal static setup, but adding a USB wireless device is not successful. It is my own network so the wpa-ssid and wpa-psk are known to work with Lenny and a previous wireless device.The device is recognized (lsusb) and the driver is confirmed to be in the kernel (lsmod). Here is the iwconfig output:

wlan0 IEEE 802.11bgn ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off

After typing: ifconfig wlan0 192.168.1.144 up I can ping that address, but it is not working. I have just done a fresh install of Sid so that I could get the 2.6.35 kernel which contains the ath9k_htc driver for the USB wireless device that I am using. The firmware is ar9271.fw but my source of that is questionable because it does not seem readily available. I am temporarily using a PCMCIA wired connection which is what I am using to connect to the computer via telnet. (This is just for convenience so as to avoid getting up all the time.) Here is the ifconfig output:

eth0 Link encap:Ethernet HWaddr 00:40:05:07:d9:11
inet addr:192.168.1.122 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::240:5ff:fe07:d911/64 Scope:Link

[code]...

That file works with the previous USB wireless device under Lenny. Am I doing something wrong or is the driver and firmware just not up to snuff yet?

View 5 Replies View Related

Debian Configuration :: Wireless Not Working On Squeeze?

Feb 14, 2011

I am moving over to debian from ubuntu, and the latest install is to an acer aspire one netbook, the wireless card seems to be working and I can see available networks and even connect to mine (with WPA encryption) via the gnome network manager, however opening a browser or pinging both local and external machines all fail. its as if the OS does not not know to use the card. The wired works fine.

If memory serves the card is identified by lspci as Atheros AR5007.

There is no reference to wlan0 in etc/network/interfaces.

I do not have that system on now and have to leave for work, but I can post any further info from conf files etc as required when i get home tonight... Just thought I'd post a quick description in case I'm missing something obvious...

View 2 Replies View Related

Debian Configuration :: LAN Connection Not Working After Last Update?

Mar 20, 2011

About an hour ago i did an update on my Debian Squeeze. After the update was completed my LAN connection stopped working.. now i have to connect my computer to my router with a usb cable instead with my ethernet cable.. also, on the network connection, on the wired network section it says that the device(ethernet) has not been managed..

View 1 Replies View Related

Debian Configuration :: Mouse Not Working After Update?

Jun 1, 2011

after a long time I did a little upgrading of the packages...

bind9-host:amd64 (9.7.3.dfsg-1~squeeze1, 9.7.3.dfsg-1~squeeze2), linux-image-2.6.32-5-d64 (2.6.32-31.6.32-34squeeze1), dnsutils:amd64 (9.7.3.dfsg-1~squeeze1, 9.7.3.dfsg-1~squeeze2), linux-headers-2.6.32-5-common:amd64 (2.6.32-31, 2.6.32-34squeeze1),

[code]...

View 2 Replies View Related

Debian Configuration :: Automount In Xfce 4 Not Working?

Jun 15, 2011

I'm running Debian sid and currently have xfce 4.8.0 installed. I have the thunar-volman package and it is configured to automount everything (cdrom & usb). I have hal, udev, gamin and autofs installed as well.For some reason though, automount just isn't working. It's starting to annoy me.I can mount the devices manually.I looked around already but most posts just advise you to install hal or something.

View 4 Replies View Related

Debian Configuration :: Root Passwd Not Working

Jun 25, 2011

my debian laptop this morning ,saw that the update manager had updates..97 of them??? then when tried to view them the package manager freezes and becomes unresponsive. needed to do a few things and found my root password is NOT working. this all happened at the same time, i wonder if its related? have i been hacked? is this something new? cant reset root password (tried two methodeds with no luck) and cant view the updates altho i question 97 new updates are needed.

View 7 Replies View Related

Debian Configuration :: Dell Mini 9 Mic -- Not Working?

Jun 30, 2011

Im running the latest Debian version, 6.0 on my Dell Mini 9.Webcam and sound work, but microphone is a no-go.In Alsamixer (1.0.23), I have Capture, Digital, and Mic settings all the way up. There are no options for adjusting "Front" mic settings. (May have been for older alsamixer versions?)In Sound Recorder, playback has loud noise/feedback? I'm not sure how to interpret the above, but I am just trying to offer as much relevant background information as I can.I've been scouring forums for the answer, but to no avail. Most questions/answers are from 2008, and couldn't find a solution. I'm not very handy with the Linux machine, but love to learn / am learning.

View 14 Replies View Related

Debian Configuration :: Software Suspend Working But Not When Lid Close

Nov 2, 2015

System is a Dell E7440, with Jessie, I recently upgraded to kernel 4.2.5 due to issues with wireless that are supposed to be fixed. (The same issue exists with jessie stock kernel 3.16 and BPO tough)

When I close the lid it often does not work and I get this in dmesg

Code: Select all[  567.104335] pci_bus 0000:01: Allocating resources
[  567.104349] pci_bus 0000:02: Allocating resources
[  567.104415] pci_bus 0000:03: Allocating resources
[  567.104428] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[  567.105515] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[  567.105540] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[  567.105585] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment

[Code] ....

I suppose the i915 stuff is something I can ignore, However

Code: Select all[  570.768020] acpi device:40: Cannot transition to power state D3hot for parent in (unknown)

seems to be the issue.. I don't even know what device:40 is.

in ls -l it shows as

Code: Select all  lrwxrwxrwx 1 root root 0 Nov  2 12:28 device:40 -> ../../../devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/INT33C6:00/device:40

and

Code: Select all# cat /sys/bus/acpi/devices/device:40/path
\_SB_.PCI0.SDHC.WI01

The awkward thing is tough, software suspend by running "systemctl suspend" works perfectly and always.

Code: Select all [  872.054627] PM: Syncing filesystems ... done.
[  872.091506] PM: Preparing system for sleep (mem)
[  872.092045] Freezing user space processes ... (elapsed 0.001 seconds) done.
[  872.093377] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[  872.094563] PM: Suspending system (mem)
[  872.094595] Suspending console(s) (use no_console_suspend to debug)

[Code] ....

So despite the mysterious issue with acpi device 40, how is real lid close different from "systemctl suspend"? And can I simply workaround the issue by making such a suspend when the lid closes?

View 2 Replies View Related

Debian Configuration :: Ethernet And Wireless Not Working On System

Dec 26, 2015

DEVICES:
atheros AR9485
realtek rtl8111/8168/8411

atheros-firmware and firmware-realtek are installed from repo.

ifconfig does not show the network devices:

ifconfig -a does show them, i ran the commands ifconfig eth1 up and ifconfig wlan1 up, which resulted in them showing when typing ifconfig, however both still are not working.

(ifconfig)Also eth1 is only showing an inet6 address not an inet/ipv4 address and wlan1 doesn't show any.

Checked the bios and noticed that network devices were enabled so i don't think its my bios.

Also ran a SystemRescueCd which i got from here: [URL] .... With this live cd, the networking was working.

Added:
Code: Select allauto eth1
iface eth1 inet dhcp
allow-hotplug eth1

Now I get a net address...

View 1 Replies View Related

Debian Configuration :: Installed Kodi Now Pulseaudio Not Working

Mar 13, 2016

I recently installed Kodi on my Wheezy system. Kodi works great but now Pulseaudio is not working. I have sound but now longer have the Volume control on the desktop, and when I try to use Skype there is no sound. In Gnome Classic I selected.Applications>Sound and Video>Pulse Audio Volume Control and get this message: Connection to Pulseaudio failed. Autimatic retry in 5s.In this case it is likely because PULSE_SERVER in the Environment/X11 Root Window Properties or default-server in client.conf is misconfigured.

View 1 Replies View Related

Debian Configuration :: WiFi Connection Isn't Working After Install?

Mar 27, 2016

I just installed the lastest stable Debian (gnome) today and what I was most afraid just happened: my laptop's wifi isn't working properly, it isn't turning on. This had already hapened on livecd.

In the laptop's chassis leds, the wifi led apears as green. When I click to turn on the wifi, as shown on the picture the button, quickly disappears and appears again not seeming to have any effect at all at turning on the wifi but not showing any error either!

Picture :

What's interesting about the wifi not working is that in the installation process I was able to connect to a wifi hotspot and it connected to the internet fine!

Now after installation was complete and my system did the reboot, I was no longer able to connect to the internet using wifi.

My wireless card is Atheros AR9565 and my LAN card is also Atheros.

Here is an output of lspci and lsmod which may have some leads about the problem.

lspci

Code: Select allquant@debian:~$ lspci
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller (rev 06)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06)
00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)

[Code] ....

Noticed:

1. I installed WiFi radar and I ran this on the terminal:

# sudo ifconfig wlan0 up

View 10 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved