Debian Configuration :: MySQL Server Doesn't Start

Jun 18, 2015

Since upgrading from Wheezy to Jessie I have not been able to start the MySQL-server. When I do a "systemctl start mysql" I get the following answer on the console:

Job for mysql.service failed. See 'systemctl status mysql.service' and 'journalctl -xn' for details.
Entering 'systemctl status mysql.service' the answer is:
‚óŹ mysql.service - LSB: Start and stop the mysql database server daemon
Loaded: loaded (/etc/init.d/mysql)
Active: failed (Result: exit-code) since Don 2015-06-18 18:35:41 CEST; 4min 1s ago
Process: 11272 ExecStart=/etc/init.d/mysql start (code=exited, status=1/FAILURE)

syslog and hostname.err don't show any pertinent messages.

View 4 Replies


ADVERTISEMENT

Server :: MySQL Move Database / Server Doesn't Start

Nov 3, 2010

I'm trying to move a mysql 5.1.50-community InnoDB database from one location to another.When starting the service I get:Starting MySQL.Manager of pid-file quit without updating file [FAILED]I've searched for a way to do this but I can only find people who describe what I've just done.

View 6 Replies View Related

Debian Configuration :: Configure (start/stop/restart) Services (especially Apache2, MySQL And PHP) Using A Graphical Or Cli Tool?

Jul 23, 2010

I'm using debian 5 x64 with xfce.Is there a way to configure (start/stop/restart) services (especially Apache2, mySQL and PHP) using a graphical or cli tool? I tried to use sysv-rc, sysv-rc-conf, rcconf and rc-conf in the terminal but Bash didn't find them (Although Synaptic show that sysv-rc is installed).

View 9 Replies View Related

Debian Configuration :: Nm-applet Doesn't Start After (Testing)

Feb 22, 2016

After the latest update of network-manager-gnome to version 1.1.90-3 , I see that I have to start the nm-applet in Testing from a terminal, otherwise I can't bring up my wired connection.

The usual nmcli networking on command is failing to connect, also restarting the network-manager.service with systemctl doesn't do anything, the only way to connect at this time is indeed to manually start the nm-applet from a terminal.

I've also spotted this message in the logs:

Code: Select alltraps: nm-applet[1105] general protection ip error:0 in libgobject-2.0.so.0.4600.2

Could it be something wrong with my configuration (although , it worked before this update) or is it some bug in network-manager-gnome 1.1.90 ?

View 4 Replies View Related

Debian Configuration :: Apache2 Doesn't Start At Boot Time?

Dec 6, 2010

I am running Debian-Squeeze with apache2. However, apache2 doesn't start at boot time, even though there is of course the required script in init.d. I can start it later on using "/etc/init.d/apache2 start". I have checked the configuration with "apachectl configtest" - giving the answer "Syntax ok". How do I get it to start automatically at boot time?

View 1 Replies View Related

Debian :: MySQL Server Can't Start In Lamp

Jun 24, 2015

I installed LaMp 2 days ago. First everything works; But until yesterday, I can't start anymore mysql server : it failed each time.

When I look at the status :

Code: Select allsystemctl status mysql
Failed to get D-Bus connection: Erreur inconnue -1

It's like it can't generate mysqld.sock

Code: Select all/usr/bin/mysqladmin: connect to server at 'localhost' failed
error: 'Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)'
Check that mysqld is running and that the socket: '/var/run/mysqld/mysqld.sock' exists!

I keep reading man and trying to find something I didn't configure correctly, but I can't find nothing.

View 1 Replies View Related

Debian Configuration :: MySQL Server Gives 'Wrong Password' Error?

Mar 5, 2011

At the moment I am having a problem with the MySQL server on my VPS. It's a completely fresh install of both Debian 5 and MySQL but the problem is upon logging in I get:

[root@boris ~]#mysql -u root -p
Enter password:
ERROR 1045 (28000): Access denied for user 'root'@'localhost' (using password: YES)

[code]....

View 8 Replies View Related

Server :: Mysql 'Table 'mysql.user' Doesn't Exist'?

Aug 2, 2010

I'm trying to setup wordpress on my server, which of course I need mysql for. I setup a database the other day, which worked perfectly, but I had to start again as I put some information in wrong. Now, I can create a database fine, but when I run

Code:
GRANT ALL ON wordpress.* TO wordpress@localhost IDENTIFIED BY "password";
I get the output:

[code]...

View 13 Replies View Related

Debian Configuration :: Start X Server In A Read Only Root File System?

Apr 27, 2010

For my project, it's absolutely necessary to have a read-only root partition system. I have a writable /opt/project partition.But, I also need to start x server. startx This tries to write to some temporary files and fails as / is readonly. Is there any how-to on how to move this temporary files to the writable portions of the file system.

View 3 Replies View Related

Debian Configuration :: ProFTPd Configuration - Use To Host MySQL Databases And A Few Websites

Nov 18, 2010

I am having no luck configuring ProFTPd on a Debian Lenny production server we use to host our MySQL databases and a few websites. I had originally set it up so I could login and manage our internal sites, but I have the need to allow a few clients in to access their sites that we host. I am trying to root the users in their site directory, which would be "/sites/www.whatever.com/".

It just hit me while typing this. Is it possible to create a user without a shell to prevent login via SSH and set the home folder to /sites/whatever instead of /home/username? That would allow me to continue operating with my current configuration and root them in their site while preventing SSH logins.

View 6 Replies View Related

Ubuntu Installation :: Cannot Start Mysql - "Can't Connect To Local MySQL Server Through Socket:"?

Mar 15, 2010

I am getting the following error when starting mysql using 'sudo /etc/init.d/mysql start':

Mar 15 16:33:56 MoodFishDev /etc/init.d/mysql[18317]: 0 processes alive and '/usr/bin/mysqladmin --defaults-file=/etc/mysql/debian.cnf ping' resulted in
Mar 15 16:33:56 MoodFishDev /etc/init.d/mysql[18317]: ^G/usr/bin/mysqladmin: connect to

[code]....

View 1 Replies View Related

CentOS 5 Server :: DHCPD Doesn't Start - How To Make It Start

Sep 2, 2010

I'm configuring a new Centos 5.5 server in replacement of an old W2K server.The topology of our network is simple : one file/dhcp/dns relay server and workstations (PC's and some MAC's) plus network printers and scanners.All the workstations have dynamic IP addresses (easier because a lot of 'dynamic' changes : new persons with their own laptop, ...) and the server and printers/scanners have fixed IP addresses.I edited the dhcpd.conf (see here underneath), I have the file dhcpd.leases but it doesn't start !

DHCPD.CONF
ddns-update-style interim;
ignore client-updates;

[code].....

View 3 Replies View Related

Debian Configuration :: Phpmyadmin Accessing Mysql On Debian Webserver?

Feb 9, 2011

I have installed debian on my laptop and included during the installation the webserver version. Now I want to develop a page locally to test it before I put it on the web. I first had an old reflex, jumping straight away and installing xampp. But then I thought that I already all that it takes as I installed the webserver feature of debian. I installed phpmyadmin ( with the command #apt-get install phpmyadmin) as to be able to create and attribute databases but when I try to log in I have the following message:

"Error
#2002 - The server is not responding (or the local MySQL server's socket is not correctly configured)"

I googled but I cannot find the mysql.conf (I searched using "find") but with no result. It is all very blury what is going on with this webserver option running on my laptop...

View 9 Replies View Related

Debian Configuration :: Multipath Configuration On 5.0 64 Bit - Doesn't Create The Relative Devices

Jul 20, 2011

i have a HP MSA 2312fc SAN with 2 LUNs configured. The first LUN (LUN ID 1) is correctly connected to the system, but when i connect the second LUN (LUN ID 30), i find in the syslog this message: multipathd: 8:64: size 6835937472, expected 5267578112. Discard

Here is the multipath.conf

[Code]....

So I correctly see the two luns, but multipath doesn't create the relative devices. Under /dev/mapper I see: control mpath0 mpath0-part1 mpath0-part1 is the first lun, the one I mounted in a directory under filesystem. I can't find the device for the second lun

View 1 Replies View Related

Fedora :: F12: Can't Start Mysql Server

Dec 2, 2009

I've installed mysql server and starting it "service mysqld start"

I get:

Here is what get in "mysql.log"

View 2 Replies View Related

Server :: Cannot Start MySQL After Update

Jun 14, 2010

I cant start mysql of my server after the update. my operating system is centos. I get this error.
MySQL Daemon failed to start.
Starting MySQL: [FAILED]

View 4 Replies View Related

OpenSUSE :: How To Start Stop Mysql Server

Feb 25, 2010

i am using putty to connect to my server and wanted to restart mysql server. searched the internet and found thatcommand is /etc/init.d/mysqld start or stopbut it did not worked.then tried /etc/init.d/mysql stop or startthis also did not worked.

View 6 Replies View Related

General :: Start The Mysql Server On Fedora 12?

May 28, 2010

I'm trying to start the mysql server on fedora 12. service mysqld start gives me an error:

MySQL Daemon failed to start.
Starting MySQL: [FAILED]

More details

[root@localhost mysql]# which mysql
/usr/bin/mysql

[root@localhost mysql]# mysql --version
mysql Ver 14.14 Distrib 5.1.46, for redhat-linux-gnu (x86_64) using readline 5.1

And also I get a weird pop in the notification area regarding some security threat

SELINUX is preventing /usr/libexec/mysqld "read" access on plugin.frm

View 2 Replies View Related

Server :: Mysql Fails To Start On Fedora 15?

Jul 27, 2011

Previously mysql was fine under FC14. Upgraded to FC15 64bit

System:
IntelPentium(R) Dual CPU T3400 @ 2.16GHz 2

uname -r -v
2.6.38.8-35.fc15.x86_64 #1 SMP Wed Jul 6 13:58:54 UTC 2011

Mysql would not start when I tried to use it. Failed with

Quote:

service mysqld start
Starting mysqld (via systemctl): Job failed. See system logs and 'systemctl status' for details.

Problem was these two lines in my /etc/my.cnf

Quote:

#default-character-set=utf8
#default-collation=utf8_general_ci

As you can see these are now commented out.

Result

Quote:

[root@centos etc]# service mysqld start
Starting mysqld (via systemctl): [ OK ]

or how to relate that I want them to be utf8 in the conf file,

View 1 Replies View Related

Server :: Mysql Won't Start (Centos 5.5 64bit)?

Oct 26, 2010

On a newly installed centos I updated mysql-* & php-* files using RPM repository, and I installed phpmyadmin. After that i tried restarting mysql and it just said: failed

Code:
service mysqld start
MySQL Daemon failed to start.
Starting mysqld: [FAILED]

[Code].....

View 5 Replies View Related

Server :: XAMPP - Could Not Start MySQL? (Ubuntu 11.4)

Jul 21, 2011

XAMPP: Couldn't start MySQL! I have Ubuntu 11.4. After downloading XAMPP, I went to my Downloads. I then went to the Folder (xampp-linux-1.7.4.tar.gz) and right clicked on it. The options window opened, and I selected "Extract Here"! after doing so a Folder called lampp appeared. The next step I did was open my Terminal and typed ( sudo nautilus / ). I pressed Enter and a window with a bunch Folders opened up. I selected, and opened the opt Folder. I then dragged the lampp Folder to the opt Folder.

The lampp Folder is now in the opt Folder. I right clicked on the lampp Folder and selected Properties, and then the Permissions tap. I set all 3 Folder access: -to- Create delete files and all 3 File access: -to- Read and write. I checked Allow executing file as program, and Apply Permissions to Enclosed Files button, then closed. I went back to Terminal and typed (sudo /opt/lampp/lampp start) and pressed Enter. Everything is working fine execpt MySQL!

Starting XAMPP for Linux 1.7.4...
XAMPP: Starting Apache with SSL (and PHP5)...
XAMPP: Starting MySQL...
XAMPP: Couldn't start MySQL!
XAMPP: Starting ProFTPD...
XAMPP for Linux started.

I don't know if it makes any difference but I do have Netbeans IDE 7.0 php installed and I've only worked on html and CSS on it.

View 2 Replies View Related

CentOS 5 Server :: Can't Start Mysql Daemon

Jul 26, 2011

I'm trying to install ispCP and i need to start mysqld but it won't seem to start. I'm somewhat of a nooblet to linux (have a year of VPS 'experience', but nothing too fance) so bear with me.

When i run "service mysqld start" it fails with the error: "MySQL Daemon failed to start."

I ran: "tail -n 30 /var/log/mysqld.log" and this is the output;

[root@dragon575 mysql]# tail -n 30 /var/log/mysqld.log
110726 16:03:10 InnoDB: Completed initialization of buffer pool
110726 16:03:10 InnoDB: highest supported file format is Barracuda.
110726 16:03:10 InnoDB: 1.1.8 started; log sequence number 1588761
110726 16:03:10 [ERROR] Aborting

[Code].....

View 7 Replies View Related

Debian Configuration :: Installing MySQL 5.1 In Lenny

May 17, 2010

I've been trying to install MySQL in Lenny via source binaries, following the instructions given on the MySQL official website[url]

But when i try to run the scripts/mysql_install_db --user=mysql command, doesn't work.

For the record, i'm particularly interested on installing MySQL with the generic source binaries.

View 1 Replies View Related

CentOS 5 Server :: After Adding Some Lines Into /etc/my.cnf Mysql Does Not Start

Feb 1, 2011

I am trying to install Koha on centos5.5. Afte installing myqsl it starts normally. But when i add following lines into my.cnf and trying to restart mysql again it says that restart is failed.

here is the lines that i add into [mysqld] section

default-character-set = utf8
character-set-server = utf8
skip-character-set-client-handshake

View 2 Replies View Related

Server :: Mysql MyISAM Table Doesn't Have .MYD And MYI Files

Jan 26, 2011

We have a MyISAM table without .MYD and .MYI files for storing data and index but we can select data from the table. We can't use mysqlhotcopy for backup the table. Each time,we execute mysqlhotcopy, we have the following error: 'dbs.table: is not base table'. How do we repair the table to re-create .MYD and .MYI files?

View 2 Replies View Related

Ubuntu :: Apache2 Server Configuration With MySQL And PHP5

Jul 2, 2009

I am new to linux. Currently I am using ubuntu 8.10 desktop operating system. As part of my academic project. I need to configure webserver to access from external. I installed all these using apt-get packages but when it comes to configuration. I am really not understanding. I read some documentation about this configuration but I couldn't get and fully in confused. I formatted my machine 3 times. When I tried to use localhost in firefox its working fine.

1. I need to change port from 80 to 7574. In port.conf I changed, in place of 80. I kept 7574. After that I restart and tried to access but its not working.

2. My admin provide to me. 7574 port to route it into my machine. When the user hits for suppose:
59.160.188.190:7574/project/route.html
It should goes to:
192.168.202.236:7574/project/route.html
Project folder is in /var/www
I wrote the form, to update user vehicle details. They can able to update their details in mysql server from any where.

3. Just I need the application user can access my files and update from their desktop by using path:
59.160.188.190:7574/project

How to update user details (there is no login form is directly visible to every one) in server from their desktop. What I need to configure.

View 1 Replies View Related

General :: MySQL And Apache Configuration For Busy Server?

Mar 4, 2011

I need to tune the mysql and apache server for the comparatively busy webserver. My scenario is like this.

1. The Web request is around 2000 request at a time or more.
2. Each web request will generate one mysql query.
3. The query to database is all read.
4. This server load will be at peak for around 3-4 hours after that the load will subside. As the task will be published, around 300,000 will be viewing the page.

5 quad servers are deployed, load is balanced via DNS but performance is not as expected. Centos 5.5 is used as OS. Top command shows The mysql process is around 185%!

View 3 Replies View Related

Debian Configuration :: Mysql Port 3306 Not Visible?

Sep 3, 2010

Everything default.Everything works nicely with one exception. I can't connect to MySQL from the network.nmapping localhost tells me 3306 is open but nmap from the outside shows only ports 22 and 111 open. To my knowledge I have no firewall, iptables -L gives an empty set.I have several similar installations on the same network without any problems of this nature.

View 2 Replies View Related

Debian Configuration :: Proftpd-mod-mysql And No Listing Directories

Apr 20, 2011

Im having proftpd 1.3.3a standalone on squeeze with mysql backend. It all works fine with one little problem. When i log in to directory, there is nothing in it - knowing there is shed load of files. Directories are simply not being listed. Im logging in as group member and directory permissions are rwxr-xr-x. In addition to that when i try to create new directory connection is being lost and client attempts to reconnect. After successful reconnection, connection gets lost and over and over again until i abort.

[code]...

i find Failed binding to 0.0.0.0, port 201: Address already in use. Check the ServerType directive to ensure you are configured correctly.

View 1 Replies View Related

OpenSUSE Network :: Start MySQL Automatically When The Server Reboots?

Mar 20, 2010

I installed and configured mysql 5.0 on my opensuse 11.1 box. But I have no idea how to get it to start automatically when the server reboots.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved