Debian Configuration :: Kernel 2.6.38 In Wheezy?

Apr 11, 2011

This is Wheezy x86_64. I tried two different ways to install kernel 2.6.38 on my machine and both have failed. First thing I did was to follow this guide [URL]... el-26.html) and try to compile the latest stable from kernel.org. I don't know why, but it turns into kernel panic when I try to run it. Second thing I did was to install the liquorix 2.6.38, and that also fails, seeming to boot but hanging a second short from the login. I don't know what I'm doing wrong. Is there a special way to install kernels in Debian? This is the first time I tried compiling a kernel, so it's quite likely that the problem is sitting 6 inches from the computer screen. Also, how would I remove those kernels since they're obviously not working? I know I could remove them from the grub menu but I'm not sure how to completely delete them.

View 12 Replies


ADVERTISEMENT

Debian Configuration :: Migration To Bind 9.10 In Wheezy 7.1

Nov 13, 2015

I want to migrate to bind 9.10 in debian wheezy. I don't want to take the source code from debian Sid since its an experimental version. So I have taken source code from official bind forum and compiled in debian wheezy. The compilation is successful but I am having problem in running the binary in debian wheezy. It's not honoring the binary even though I run it. I am not getting error messages on console but still it is not running.

I want to know whether its feasible to do this Or is it dependent on any other system libraries to make it run ?

Last few lines from Strace Dump
==============================

capget(0x20080522, 0, NULL) = 0
capget(0x20080522, 0, {0, CAP_CHOWN|CAP_DAC_READ_SEARCH|CAP_SETGID|CAP_SETUID|CAP_NET_BIND_SERVICE|CAP_SYS_CHROOT|CAP_SYS_RESOURCE, 0}) = 0
getuid() = 1007

[Code] .....

View 1 Replies View Related

Debian Configuration :: Allow Root In Ssh On Wheezy Usb-hdd LIVE

Jul 15, 2011

I try to allow root login in ssh on wheezy usb-hdd LIVE using this script in config/chroot_local-hooks:

This script was working well during squeeze usb-hdd live creation.

View 5 Replies View Related

Debian :: Compile Wheezy's 2.6.38 Kernel On Squeeze?

Apr 16, 2011

I'm trying to compile the 2.6.38 kernel (from the Wheezy sources) on my Squeeze laptop and get the following error: "dpkg-buildpackage: error: debian/rules build gave error exit status 2" After doing apt-get build-dep linux-image-2.6.38-2-amd64 and apt-get source linux-image-2.6.38-2-amd64 I did dpkg-buildpackeg and here is what happened:

[Code]...

View 2 Replies View Related

Debian :: Install Ubuntu's Kernel In Wheezy ?

Jun 13, 2011

I know from a myriad of posts on these forums that Ubuntu is more bleeding edge than Debian Testing. Since, Debian'w own kernel is misbehaving rejecting my video chip (i915), I am tempted to install Ubuntu's kernel in Wheeze.

So, the golden question is: Is it logical and feasible to install Ubuntu's kernel in Wheezy? Wheezy's kernel is 2.6.38.

View 4 Replies View Related

Debian :: Installation Of The Liquorix Kernel In Wheezy

Jun 15, 2011

I searched the forum about installing the liquorix kernel but I cannot understand why the file /etc/apt/sources.list is not mentioned to invoke the liquorix repository.

Instead, I found: Alternative Performance Kernel for Debian wrote:For anyone interested, just add the following to a sources file (/etc/apt/sources.list.d/liquorix.list): deb [url] or for you scripters, echo "deb [url]

View 2 Replies View Related

Debian Configuration :: High CPU Temp Wheezy X200

May 10, 2015

I am noticing some rather high CPU temps while using Debian 7.8 KDE on a Lenovo X200 laptop.

Even when its not doing anything its getting as high as 70C sometimes. I opened it up and went in with a can of compressed air, it went down a little to 36C now its back to 70c the day after.

Then I realised the fan was hardly spinning is there any way I can control how much (or little) the fan spins at certain temps?

My guesses are it could be done with a bash / shell script in the kernal loaded at booting up. But am unsure.

Here is my dmesg [URL] ....

And lsmod [URL] ....

View 2 Replies View Related

Debian Configuration :: Wheezy - Can't Change Software Sources?

Apr 13, 2011

I updated to Wheezy from Squeeze and whilst I can make changes to sources.list manually, I can't do some updates in Software Sources.For instance, the 3 check boxes under "Download from internet" are all un-ticked and I can't change them if I wanted to - even though the sources.list is set up with "main contrib non-free"I cannot amend the download server either - it works out what the best server is but wont update if I tell it to.

View 9 Replies View Related

Debian Configuration :: Installing Radeon Drivers For Wheezy?

May 27, 2011

I need some help installing the driver. I am very noob. so when I try to build a deb file with sh ati-driver-installer-11-5-x86.x86_64.run --buildpkg Debian/testing

# sh ati-driver-installer-11-5-x86.x86_64.run --buildpkg Debian/testing
Created directory fglrx-install.7aYYig
Verifying archive integrity... All good.
Uncompressing ATI Catalyst(TM) Proprietary Driver-

[Code]...

View 12 Replies View Related

Debian Configuration :: Manage GNOME Keyrings In Wheezy?

Jun 8, 2011

Last week I upgraded from Squeeze to Wheezy. Everything seems to be in order, except now launching empathy will get my 4 separate GNOME keyring prompts in a row. I guess my keyring got copied for some reason, but Ican't figure out what package to install to deal with my keyrings, as gnome-keyring-manager is only in sid...

View 2 Replies View Related

Debian Configuration :: Wheezy - Detect Printer On One WiFi Network But Not Other

Sep 21, 2015

I use a 'wifi hotspot' provided by my mobile (android) phone for internet/email and to connect to my wifi capable HP p1102w printer. Installation and use of the printer worked perfectly until I bought a new phone, again android with 'wifi hotspot' capability. The wifi connection on my new phone works fine for internet and email but it totally fails to detect my printer.

I have tried to detect and connect to the printer using system-config-printer and using the HP utility hp-setup. Both fail to detect the printer on the 'new' wifi network.

The old network connection which detects the printer as expected gives the following output:

Code: Select allpat@debian:~$ ifconfig
eth0      Link encap:Ethernet  HWaddr 6c:3b:e5:91:ec:0c 
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

[Code] ....

The new (problematic) network connection which fails to detect the printer gives the following output:

Code: Select allpat@debian:~$ ifconfig
eth0      Link encap:Ethernet  HWaddr 6c:3b:e5:91:ec:0c 
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

[Code] ....

View 4 Replies View Related

Debian Configuration :: Wheezy Radeon / Intel Graphics Switcheroo?

Apr 16, 2011

I have an Acer Aspire TimelineX 4820TG. I'm running Wheezy and I can't seem to get switcheroo working correctly. I was running Squeeze, then upgraded to Wheezy because it had a kernel over 2.6.33 with switcheroo built in. Below is the layout of my build...

(~)$ uname -a
Linux skipjack-debian 2.6.38-2-686 #1 SMP Thu Apr 7 05:24:21 UTC 2011 i686 GNU/Linux
(~)$ lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18)
01:00.0 VGA compatible controller: ATI Technologies Inc Redwood [Radeon HD 5600 Series]

[code]....

View 5 Replies View Related

Debian Configuration :: Wheezy Xfce 4.8 VERY SLOW First Thunar Startup

May 16, 2011

I upgraded my main PC's Xfce 4.6 to Xfce 4.8 this morning.Now, every time I start Thunar for the first time after a new boot, it takes about 30 seconds to appear, and then about 10 seconds later, a second instance of it appears.After that, Thunar appears instantly every time I start it during that same session. But if I shut-down or restart my PC, Thunar again takes about 30 seconds to start up, and a second instance of it appears about 10 seconds later.

Google searches seem to indicate that people running other distros are also experiencing this problem. On advice in a different forum, I deleted the ~/.config/Thunar folder and restarted my PC, but that didn't help -- it created a new Thunar folder, but the long delay and the double-Thunars are still there every time I run Thunar for the first time in a session.

View 13 Replies View Related

Debian Configuration :: Wheezy I386 - No Internet Access After Uninstall Gnome

Jun 20, 2015

I'm using Debian Wheezy i386.

I've tried to uninstall gnome as below :

Code: Select all# aptitude purge `dpkg --get-selections | grep gnome | cut -f 1`
# aptitude -f install
# aptitude purge `dpkg --get-selections | grep deinstall | cut -f 1`
# aptitude -f install

And gnome successfully removed.

After reboot, system started in tty and I plugged Wired Network cable to access Internet but I have no Internet!

Content of "/etc/apt/sources.list" :
Code: Select alldeb http://ftp.au.debian.org/debian wheezy main
deb-src http://ftp.au.debian.org/debian wheezy main

Output of `ifconfig` :

View 2 Replies View Related

Debian Configuration :: Udev Static Device Change From Wheezy To Jessie

Sep 9, 2015

I am using a 3rd party kernel driver that does not support udev properly. When I was using wheezy I placed the required device files in /lib/udev/devices.

The udev in jessie does not appear to support this. Is there any way to have udev create these device files or will I have to create then using a script at boot-up?

View 1 Replies View Related

Debian Configuration :: Samba Share No Longer Auto-mounting In Wheezy

May 1, 2011

I upgraded my testing/Wheezy Inspiron N5010 to 2.6.38-2-amd64 recently (along with a bunch of other updates, of course) and now my Samba network share is no longer automatically mounting, I have to open a root terminal and do a "mount /mountpoint"; my relevant /etc/fstab entry:

I've tried over options, as well, but it isn't automatically mounting. Any suggestions (including where to file a bug report)?

View 3 Replies View Related

Debian Configuration :: Video Mode Not Supported. Nvidia Unstable(Wheezy)?

Aug 23, 2011

Recently, I installed VVVVVV and discovered that when attempting to use fullscreen mode, the monitor displays "video mode not supported" for 640x480, 800x600, 1024x768, and auto. After googling around for an hour or two (and only finding stuff from 2008-09) I have created a new xorg.conf from Xorg -configure and nvidia-xconfig. This doesn't seem to have had anyeffect.DebianRelease unstable (sid)Kernel Linux 3.0.0-1-amd64GNOME 3.0.2GeForce 7600 GSMonitor: Hyundai Imagequest

$ cat /etc/X11/xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 280.13 (pbuilder@cake) Mon Aug 8 15:37:15 UTC 2011

[code].....

View 4 Replies View Related

Debian Configuration :: Installing Wheezy Nvidia Drivers On Squeezy System?

Sep 1, 2011

I need to install wheezy nvidia-graphics-drivers because my video card (geforce GT 425m) isnt supported on the squeezy version. I downloaded the wheezy source code and built it on my squeezy system, some .deb files where created, the problem is I dont know which of those to install, these are the files:

libcuda1280.13-1amd64.deb
nvidia-glx-ia32280.13-1amd64.deb
libcuda1-ia32280.13-1amd64.deb

[code]....

View 7 Replies View Related

Debian Configuration :: Wheezy - After Update Systemd Turn Off Laptop Screen On Boot

Sep 25, 2015

I decided to update all the software on my computer. Fortunately, it upgraded kernel version 3.14 to 3.16. I was happy to learn that suspend now worked on my laptop by calling pm-suspend, but it did not worked by closing the lid. So I search and found on debian's website that installing systemd and adding some config lines in /etc/systemd/logind.conf would sove the issue. So I followed the procedure and did like instructed, to end up with a computer that boots on black screen.

The last verbrose line I see on boot up is "kvm disabled by bios" and then it shutdown down the screen. The computer works, as I can login and shutdown by doing those operation blindly.

I tried removing systemd but it still does not work. If I use the old kernel 3.14 I can boot without any problem, but if I use kernel 3.16, I boot to a black screen. I remember successfully booting in 3.16 before installing systemd.

View 4 Replies View Related

Debian Configuration :: Is It 64bit Kernel Or 32bit Kernel Optimized For Amd64 Architecture?

Jan 24, 2010

I recently installed debian squeeze 32bit on a second partition of my amd athlon 64 X2 dual core machine.Currently it is using linux-image-2.6.32-trunk-686 kernel.But linux-image-2.6.32-trunk-amd64 is available.on the repository.Is it a 64bit kernel or 32bit kernel optimized for amd64 architecture?

View 12 Replies View Related

Debian Configuration :: Update My Kernel From 2.6.32 To 2.6.38 - Error - Unable To Boot Into The Kernel

May 13, 2011

I am using DEBIAN 6.0 and I wannna update my kernel from 2.6.32 to 2.6.38. Every time, I do it but after the installation & rebooting into the new kernel it gives me error "UNABLE TO BOOT INTO THE KERNEL".

View 1 Replies View Related

Debian Configuration :: Nvidia Kernel Module With Custom Kernel

Jan 24, 2010

I have a problem with my custom kernel when I want to create the Nvidia kernel module.After this finished I installed the image and headers and created the Nvidia kernel module. Everything worked fine.However, if I remove the linux-source from my home directory then I can't create the kernel module.Even though I have the headers for the kernel installed.

View 2 Replies View Related

Debian Configuration :: Squeeze D-u - Kernel Configuration Skipped

Jul 6, 2010

I have a set of vm's with stable, testing, and sid to keep track of how things are going. When I did an apt-get dist-upgrade with squeeze last week, things seemed to OK (350 package updates) until the end. It didn't seem to like and / or was confused by a kernel dependency.

I am not too concerned yet. Because these are in vm's, I do a snapshot before any significant change. I can futz around with impunity because I have that backup.

I re-booted, and tried the apt-get dist-upgrade again with same results. I think I also tried apt-get -f install.

So I reverted to the snapshot, and will simply try again in the future. I recall that with lenny as testing, the font-desktop was really screwed up for about a period of 6 weeks.

However, just in case someone else runs into this:

1) a re-boot worked, but the failure of apt-get made me nervous enough to revert.

2) waiting for corrections has seemed to work in the past (with a single exception with a 4-disk SCSI software RAID10 update that failed to re-boot lenny successfully after what seemed to be a minor update -- that was on a real system, not a vm. I haven't gotten back to look at that.)

View 14 Replies View Related

Debian Configuration :: Save To Install Kernel 2.6.35.2 On Debian Lenny 5.0.5 Or Stick With Automatic Updates

Aug 20, 2010

is it save to install linux kernel 2.6.35.2 on Debian Lenny 5.0.5 or stick with automatic updates...

View 14 Replies View Related

Debian Configuration :: Need Kernel Between 2.6.26 And 2.6.32

Dec 7, 2010

On Lenny, due to some compatibility issues: kernels before 2.6.26 don't recognize part of my vaio laptop's hardware, while the last drivers of my videocard (version: 260, card: nvidia gt 230m) suffer some incompatibility problem (this is one of the most problematic computers I ever had), so I have to use version 256, which doesn't work with kernels after (perhaps) 2.6.32. So, I suppose I have to check each kernel between that two versions and hope that one of them will be ok. I searched quite deeply over the net but didn't find anything related to debian, except for generic kernels [URL], but as someone told me that it's better if I only install stuff from the stable repository or backports. What can I do? Is there any backports archive or something like that? Otherwise, what should I do?

View 5 Replies View Related

Debian Configuration :: Add New AMD PCI-IDs To Kernel Module

Jul 9, 2015

I recently bought an AMD R7 360 videocard and I'd like to use the free Radeon driver.

Problem is, PCI-ID 0x665f is not present in Jessie's 3.16 kernel sources. The hardware however is supported, it's just not recognized. So I'll have to get the Debain sources and patch include/drm/drm_pciids.h

From the 4.1rc1 kernel I know what to patch and where.

Debian page that explains how to use the Debian build system for recompiling the current kernel from Debian packages?

View 6 Replies View Related

Debian Configuration :: Kernel Not Updating To 3.16

Jul 26, 2015

Upgraded Wheezy to Jessie, by changing my apt sources to point at stable instead of wheezy. Ran upgrade, and dist-upgrade, all fine etc.

Then tried to update the kernel by installing linux-image-amd64 package .. seemed to work fine, but after a reboot my kernel version still says 3.10.23

What have I missed?

Code: Select allroot@hostname:~# apt-cache search linux-image
linux-headers-3.16.0-4-amd64 - Header files for Linux 3.16.0-4-amd64
linux-image-3.16.0-4-amd64 - Linux 3.16 for 64-bit PCs
linux-image-3.16.0-4-amd64-dbg - Debugging symbols for Linux 3.16.0-4-amd64
linux-image-amd64 - Linux for 64-bit PCs (meta-package)

[Code] .....

View 6 Replies View Related

Debian Configuration :: Kernel Upgrade 2.6 -> 3.16

Sep 24, 2015

I have a MyBookLive where i installed a Debian 2.6 kernel. The system is running fine so far. Because of an error message when apt-get upgrade (udev) i tried to upgrade to 3.16. Here's what i did:

- apt-get install linux-image-xx
- apt-get install linux-source-xx
- extract the source
- copied the old .config from running 2.6 kernel over to the 3.16 directory
- make oldconfig
- make uImage
- make modules
- make modules_install
- copied uImage to /boot

No error messages because its a headless device - its just not booting up.

View 2 Replies View Related

Debian Configuration :: Kernel For Virtualization ?

Apr 12, 2010

I was wondering if anyone can assist me. I am looking to build a server with Debian as the host. When I installed Debian (Squeeze) the default kernel was "2.6.32-3-trunk-amd64". When I tried to install 'Virtualbox' application, I got a failure because I didn't have the 'kernel-headers' installed on my machine. I noticed there are no specific header package the 'trunk' kernel I was using. I have a few questions so I guess I should begin:

Is it safe to remove the 'trunk' kernel and boot my system on just the regular 2.6.32-3-amd64 kernel? Is this OK or not recommended? Please explain whatever is the correct answer. This is my 1st time using a 'Trunk' kernel so I don't know the in's and out's of it.

If I am using Debian 'Testing' for virtualization via 'Vbox', is there a specific kernel I "should" be using?

View 12 Replies View Related

Debian Configuration :: New Kernel Cannot Start ?

Sep 10, 2010

I have maked a new kernel (version is 2.6.24.7) in debian system which kernel is 2.6.26, and then when i start the new kernel which is 2.6.24.7, it tells me that:

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved