I revived my old desktop (failed psu), and installed debian squeeze using netinst. It has a nvidia geForce 7600GT card. The driver in squeeze does not work very well, so I downloaded nvidia driver-installer. When I run it, it comes back with an error saying the kernel (I assume the nvidia graphics kernel) is compiled with gcc4.3, but the system is using gcc4.4. Using synaptic manager, I installed gcc3.3, but same error.
Next I tried to uninstall gcc4.4 and it gave a warning the system might not be usable. I did not understand it, but I went ahead and uninstalled gcc4.4 and guess what, the system is not usable, and I have to re-install squeeze. Not a big loss, since I do not have much in it. How to install this nvidia driver, specifically, how do I get switch to gcc4.3 from gcc4.3? Also, the squeeze install gave me 2.6.33-trunk-amd64, and 2.6.33-3-amd64. How do I get rid of ...trunk-amd64? Do I just delete it from grub?
I have completed building gazebo, and everything was done successfully according to the following link [URL]... bot_Simulation , but when I tried to invoke gazebo using the command "gazebo /usr/local/share/gazebo/worlds/pioneer2dx.world" it returns the following error
After I've installed nvidia-vdpau-driver 280.13-1 from debian testing repositories, all the colors on the screen became too bright, except dark colors.
I've tried to change the values from Brightness, Contrast and Gamma, in NVIDIA X Server Settings -> X Server Color Correction, but it doesn't bring everything back to normal.
Either the nvidia driver has problems, or I don't know how to calibrate. But before I installed nvidia-vdpau-driver, I had the nouveau display driver (experimental), and all colors were displayed normally, the same as in Windows 7 and XP.
Using squeeze with a GeForce4 MX 440 video card (NVIDIA) I have a monitor (4/3 aspect ratio, 1024x768 usually), and a TV connected via S-video After installing the NVIDIA driver using the NVIDIA binaries I managed to have a cloned twin screen configuration working.
However, the monitor is (wrongly) detected as having size 1824x768 (aspect ratio is widescreen) Using system monitor, I can set the correct size, but only for one session; besides, the login screen too is messed up the xorg.conf file seems right: proper resolution modes are set; xorg.0.log too
After having some trouble with Intel graphics I decided to pick up a PCI Nvidia graphics card. Now I am wondering what driver to use. Is the open source drive good enough to use or should I install the Nvidia driver? I know that things are generally easier with the default driver, especially for support on older cards, but I would like to get the best performance I can. This is for my Dad's computer, so he won't be playing any games, but if it will help with 2D and video that would be great.
The card is an Geforce FX5200 fanless card, I've heard they are well supported in Linux.The computer is a P4 Dell 3000 with Ubuntu desktop 10.04 32bit.
I am having problems installing the graphics driver (from the Nvidia website) for my Nvidia Vanta card on Ubuntu 10.04. I disabled X via terminal and then I ran a Virtual Console. With the virtual console I ran the chmod command and the went through the installation. It did bring up a message with something about my distro not having a pre-configured script (or something like that) and asked me if I would like to continue anyway. I choose Yes and the installation failed.
I took the following path: Yast - Hardware - Graphics Card and Monitor; and it gave me message "the configuration is Framebuffer based and your system does not support changes for resolution and/or color settings". I verified my system's(dual boot system) graphics card using windows OS and it showed NVIDIA Quadro FX 570, but in X11 configuration it shows "Card: VESA Framebuffer Graphics" and the Properties tab is not active.
Re: nVidia latest Drivers - im trying to install a 9800gt nvidia graphics card on my ubuuntu i have been reading forums for the last 5 days and still no luck i managed to do a install and it is giving me the following errors distribution pre install script failed install failed /var/log/nvidia-installer.log unable to load kernal module 'nvidia,ko,
I am using fedora10 in my notebook. I installed nvidia-graphics driver as follows.
su -c 'rpm -ivh http://download1.rpmfusion.org/free/...ble.noarch.rpm' su -c 'rpm -ivh http://download1.rpmfusion.org/nonfr...ble.noarch.rpm' su -c 'rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-rpmfusion-*'
Then i installed kmod-nvidia with yum su -c 'yum install kmod-nvidia' When i tried to open NVIDIA control panel, i got a message that nvidia-driver should be configured. Then i issued the following command as root. nvidia-xconfig. The i rebooted the system. Now in the boot menu, i see two kernel informations as follows
If i boot my linux with first one, x windows starts, if i boot with the second one (previously default), the x-windows is not opening. Why this happens? So i booted my system with first option in the boot menu. The system booted and x.windows started but i am not able to use any software that uses opengl window. The glxinfo command gives me the following error.
It came up saying I could install 2 proprietary drivers, one for my WiFi adapter (which works perfectly) and one for my graphics card - a Sapphire AIT Radeon HD 5770 1024MB GDDR5 PCI-Express Graphics Card. The driver is called ATI/AMD proprietary FGLRX graphics driver. Before installing this driver I was unable to have Extra Visual Effects in Appearances. However after installing (and restarting) the menu bars are now in a basic light gray mode, rather than the sleek Ubuntu black. - Although Extra Visual Effects does now work. I've tried rebooting, and I've had a look around in ATI "Catalyst Control Center" but nothing has worked so far.
Does anybody know what this windows mode is, how to change it back to normal and why it's doing it in the first place?
Below is a screenshot of my computer: [URL]
This is also the first time I've installed Ubuntu on my computer, and am keen for it to work.
So I installed openSUSE 11.1, and got everything from yast2 and then finally got nvidia.ymp or whatever. Bascially, the one click install. When i did that, I couldn't boot into the SUSE GUI. I could boot into the command line but I couldn't start X server.When I did try the Ec2-openSUSE-22.214.171.124 option, I get grub error 13. It says that the ex2fs file system is not supported, only I did not format it with ext2. I am completely stumped and I'm a newbie.
I have a Slackware 13.1/64-current system running the 126.96.36.199 kernel that I have installed the most recent nvidia drivers for (as of yesterday or day before) 260.19.12. If I boot up into run level 4 after running nvidia-xconfig in a console and run glxinfo as root I get:
bash-4.1# glxinfo name of display: :0.0 Error: couldn't find RGB GLX visual or fbconfig
If I edit /etc/profile or /home/username/.bash_profile and add the following:
I have set both X=0 and X=1 as reported by [URL] I get the screen of information except it says
direct rendering: No (LIBGL_ALWAYS_INDIRECT set)
my lspci -v for the graphics card looks like this:
05:00.0 VGA compatible controller: nVidia Corporation G86 [GeForce 8500 GT] (rev a1) (prog-if 00 [VGA controller]) Subsystem: XFX Pine Group Inc. Device 2353 Flags: bus master, fast devsel, latency 0, IRQ 16
I am sure I missing something from my xorg.conf but at this point I am not sure what I have been searching on this for days to no avail. From the log the only thing that looks like is a problem is it doesn't load the keyboard and mouse but it gets loaded later on in the file.
I have just installed Ubuntu (9.10) and noted that in order to successfully run the trial off the CD I had to test in "safe graphics" mode. I have an NVIDIA GEforce 6600 GT card - which was discovered by Ubuntu in the first few minutes of the trial and so I activated the recommended driver and continued to test. After a successful trial I installed Ubuntu (dual partition Ubuntu / Windows XP), however, it seems the install didn't activate the required driver (as part of the process) and so I'm unable to get into my newly-installed Ubuntu at all. All I get is a flashing tty screen asking for my username and password - however it's erratic and won't recognise what I type. So - I'm stuck in a catch-22 as there doesn't seems to be a safe graphics mode option via the start (GRUB?) menu list.
I'm going about my ways to get my drivers installed for my graphics card, but the page I'm using, URL>..has me apt-get install "nvidia-kernel-common".Synaptic says it doesn't exist, and it appears to be a pretty important package to have. So is there a way for somebody to get that online for me to install?
I've been using ubuntu on a new desktop for a couple of months, but i had an old HP that was given to me in my basement. It has 384Mb of ram, and thats because i had a 256Mb stick laying around. I installed debian becuase it is more suited for older hardware (at least from what I've read). It installed fine, but it boots to a blank screen, and pressing ctrl+alt+F2 bring me to the command line. I checked /etc/X11/xorg.conf to change the driver to vesa, to find out my video card isn't even shown. I ran lspci and I found that it says my graphics card is Intel Corporation 82810E DC-133 (CGC) Chipset graphics controller (rev3) In the device section of xorg.conf, it merly says Identifier"Configured Video Device"
i've installed debian 8 on this laptop but can't use the nvidia card from nvidia-detect can't find the card but it work 'cause i can see it in the list of hardware, 3d controller the driver from nvidia don't work, and i had a problem with force installation and xorg.conf file.. how i can make it work ? the card it's nvidia 820m
I recently installed Squeeze. I had sound with the video driver that came with the install. Then I installed the Nvidia driver from Nvidia website. The sound dissappeared. When I uninstalled the Nvidia driver and removed xorg.conf and rebooted again, the sound came back. Then I installed the Nvidia driver from (nvidia-glx, dev and settings) from Debian with Synaptic. The sound went away again. If I uninstall the nvidia driver and xorg.conf the sound will probably come back again. The sound driver is the one that came with the install.
The volumes are unmuted in the alsamixer. Somehow alsaconf command does not work.
My mother board is a ASUS M4N78 Pro with Nvidia IGP.
What can I do to have sound with the nvidia driver?
I have a video card. But I cannnot install nvidia driver because of some errors.
My video card's info is GeForce GTX760 1.5GB GDDR5. Code: Select all$nvidia-detect Detected NVIDIA GPUs: 01:00.0 VGA compatible controller : NVIDIA Corporation Device [10de:118e] (rev a1) Uh oh. Your card is not supported by any driver version up to 304.125. A newer driver may add support for your card. Newer driver releases may be available in backports.
I've been trying to install the latest NVIDIA driver for my 7800GS card. dl the driver from NVIDIA. ctrl+alt+F1. stop gdm3, after I hit agree I get an error. The CC version check failed: The compiler used to compile the kernel (gcc4.3) dows not match the current compiler (gcc4.4). The Linux 2.6 kernel module loader rejects kernel module built with a..
I installed Debian Squeeze with no issues. I went to install latest Nvidia driver as done previously with Lenny. Used instructions that worked on lenny from "the trooper" [url]
Downloaded th latest driver for my GeForce 7300 GS vidio card, driver package NVIDIA-Linux-x86-260.19.12.run
Used "method # 2 as described in HOW TO,as it worked perfectly in the past on Lenny. Only syntax I changed was instead of gdm I typed gdm3 as it appears that is the new name for gnome in Squeeze.
Did as folows:
Now the trouble showed up, Unfortunatly I can only go off my memory. A question was asked stating that something did not match, it needed a 3 and the driver had a 4 version or somethng of this sort. then it asked if I new what I was doing (and I lied) and selected yes. And whammo, it didn't work. (This question was asked when i did in Lenny and it is working perfectly still on that system). I now can not boot to GUI, I notice when system boots it starts in "S" mode although I select normal boot from grub2.
Not too bad if I got to reinstall as little is on the system. I just want to know what I am missing on the instalation deal or should I be going about this difrently with Squeeze.