Debian Configuration :: Gwibber 3.0 / Can't Add Accounts?

Jun 3, 2011

I'm trying to use gwibber 3.0 in Debian SID for the first time but I can't add accounts. I can perform all the steps but the new account never appears in the account list. I've tried debugging the problem but I don't know much about python apps. It seems that some files didn't get compiled (*.pyc) after installation so when running gwibber it tried to compile them without success. I've run it as root so that they got compiled it but it's still the same, no surprise here.

Someone has reported a bug for this issue but no response so far: url

View 7 Replies


Ubuntu :: Gwibber Not Saving Broadcast Accounts

Jun 9, 2010

I am trying to set up my facebook account with gwibber. I click on add account and authorise my facebook account with gwibber successfully, but then when I close this window and go to the main gwibber window, there is nothing showing, so I go back to the accounts page, and there are no acconts listed there.

View 7 Replies View Related

Debian Configuration :: Gwibber And Miro Disconnects Network?

Jul 5, 2011

i am using #!CB statler AMD64 which is a 100% Debian squeeze distro on an Asus A52F with 2.6.36-2.dmz.5-liquorix-amd64 #1 ZEN SMP PREEMPT Tue Dec 14 20:40:25 CST 2010 x86_64 GNU/Linux

00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics


View 1 Replies View Related

Ubuntu :: Gwibber / Timeline The "Broadcast Accounts" (preferences) Appears Not?

May 7, 2010

In one of the threads I learnt that deleting the keyrings and setting the password to blank will help me escape the password pop up for the social broadcaster and so I did the same,now a new problem, every time I refresh the timeline the "Broadcast Accounts" (preferences) appears not one but 3 and this keeps pilling up as the update continues every 10 minutes, ITS REALLY IRRITATING that every time I refresh the timeline 3 windows appear and I have to close all of them pls look into it as soon as possible.And on another note: I posted a thread on it but I didn't seem to get a single GWIBBER it doesn't show the MAIN TIMELINE FOR MY IDENTI.CA account. it just shows me the replies that people have posted to my status update....if it is possible get a new social broadcast client for Ubuntu GWIBBER certainly doesn't appeal not at its current form.

View 7 Replies View Related

Fedora :: Gwibber Alternative / Installing Gwibber From The Last Stable Sources Gives The Same Crash?

Jul 23, 2011

I used to use Gwibber as social networks aggregator/client, but starting since last update (current version 3.1.0) it crashes miserably on both Fedora 14 and Fedora 15.

Gwibber team looks reluctant to provide any feedback on whether this shall be fixed in foreseeable future. Installing Gwibber from the last stable sources gives the same crash.

View 9 Replies View Related

Ubuntu :: Remove Gwibber Status Indicator / Gwibber Status In The Panel While Keeping The Shutdown Button?

Mar 16, 2011

After a fresh installation of Ubuntu 10.10 I uninstalled empathy (im using skype). The empathy menu in the evolution indicator was gone after that.I also uninstalled gwibber. But the gwibber status indicator remains within the about-me panel... Uninstalling the gwibber package also removes the me-menu which I want to keep actually. Especially the shutdown/restart... part of it. See attachment.I know there is a shutdown panel-app...but its butt-ugly and it doesnt allow to logon/off.

In another thread I read that the gwibber status shouldnt be there if no account for it is configured... which it is not... I do use ubuntu-one though which is in the same menu... I saw that this issue was addressed at some bug report before, but not fixed yet...

Does anybody know a good workaround to get rid of the gwibber status in the panel while keeping the about me and the shutdown button?

View 3 Replies View Related

Ubuntu :: MAPI Configuration For MSN Accounts?

May 18, 2011

I'm working now on Ubuntu machine .. and I'm configuring my MSN account on evolution but I found that I could only fetch it as POP ... and I hate that because I have lot of folders .

I don't know what to do but while configuring and after searching I found that Hotmail is using MAPI but I don't know its config !! what is the config ?

Server : ?
Domain name : ?

View 2 Replies View Related

Debian :: Mpathy Wouldn't Log Into Any Accounts?

Apr 12, 2011

I got libgnome-keyring0_3.0.0-1_amd64 with my full-update with SMXI this morning. After that, the keyring wouldn't remember any passwords, and empathy wouldn't log into any accounts. I downgraded to 2.32.0-1 and everything works again.

View 7 Replies View Related

Debian :: NIS And Guest Accounts - Logged In On Two Different Machines ?

Jan 27, 2010

I'm running a network with a NIS. I want to implement a guest account on my network. The requirements are that the guest can log in on multiple computers at the same time and that the guest account's file are wiped out when they log off. The problem is that when guest is logged in on two different machines some programs (like firefox) will only run on one of them at a time. Is there anyway around this?

Also: I anticipate a settings nightmare. If guest is logged in on one machine and changes the desktop background then guest logs in on another machine will the background change in both places? What happens when the same file is written at the same time?

View 1 Replies View Related

Debian Multimedia :: XFCE - Creating New User Accounts

Aug 11, 2015

I'm configuring a fresh install of Debian 8 and I'm having a problem creating new user accounts, using XFCE.I'm using the console for setting new user accounts, without any problems yet when I log in the user accounts to check if everything is ready to use I get a persistent message from the system warning the session is in kiosk mode.I've went through several step by step guides I've found over the net, went to the XFCE wiki trying to find an answer for this, with no success. I've even tried deleting user accounts and recreating it but the problem persists.

View 4 Replies View Related

Debian Multimedia :: Multiple Dropbox Accounts On One Computer?

Nov 3, 2010

Have nautilus -dropbox from this page : dropbox-deb-amd64-package/.Trying to run multiple dropbox accounts on one computer, see :multiple-dropbox-instances-in-same-time.html.When I run HOME=$HOME/.dropbox-alt /usr/bin/dropbox start -i I

get : ~$ HOME=$HOME/.dropbox-alt /usr/bin/dropbox start -i
Starting Dropbox...No protocol specified
/usr/lib/pymodules/python2.6/gtk-2.0/gtk/ GtkWarning: could not open display


View 1 Replies View Related

Debian :: How To Show All Created Users Accounts On Squeeze

Feb 20, 2011

Howto show all created users accounts on squeeze?

View 2 Replies View Related

Software :: Debian + Postfix + Dovecot Find Old Accounts?

Jul 13, 2010

I'm using mbox storing for dovecot 1.0.15 messages. The mailbox is in a different partition (/var/mail).The MTA is postfix 2.5.5. SO is Debian 5. How can I find email accounts that haven't be accessed within a 30 days period in order to delete them?

View 1 Replies View Related

Debian Multimedia :: Icedove Updates Changed Display Accounts And Folders

Dec 31, 2015

Running Jessie 8.2 and Icedove 38.4.0. I just applied some updates and now Icedove only displays the number of unread messages in the folders.

Previously, it displayed the number of unread and the total number of messages in neat columns. Now it is a single number of unread in parens.

Is there any way I can get the display back to the previous format of unread# and total#?

View 0 Replies View Related

Debian Multimedia :: Gnome Online Accounts Exchange Advanced Settings

Mar 1, 2016

I've installed last Debian Stable with Gnome 3 environment and after added my enterprise account into the Gnome Online Accounts it apear into Evolution (but only after i've manually installed evolution-ews package) the problem is that i can't change any adevanced settings like "local synchronisation" into Evolution.

It's like Gnome Online Accounts revert back the settings each time i change it.

View 0 Replies View Related

Debian Configuration :: ProFTPd Configuration - Use To Host MySQL Databases And A Few Websites

Nov 18, 2010

I am having no luck configuring ProFTPd on a Debian Lenny production server we use to host our MySQL databases and a few websites. I had originally set it up so I could login and manage our internal sites, but I have the need to allow a few clients in to access their sites that we host. I am trying to root the users in their site directory, which would be "/sites/".

It just hit me while typing this. Is it possible to create a user without a shell to prevent login via SSH and set the home folder to /sites/whatever instead of /home/username? That would allow me to continue operating with my current configuration and root them in their site while preventing SSH logins.

View 6 Replies View Related

Debian Configuration :: Multipath Configuration On 5.0 64 Bit - Doesn't Create The Relative Devices

Jul 20, 2011

i have a HP MSA 2312fc SAN with 2 LUNs configured. The first LUN (LUN ID 1) is correctly connected to the system, but when i connect the second LUN (LUN ID 30), i find in the syslog this message: multipathd: 8:64: size 6835937472, expected 5267578112. Discard

Here is the multipath.conf


So I correctly see the two luns, but multipath doesn't create the relative devices. Under /dev/mapper I see: control mpath0 mpath0-part1 mpath0-part1 is the first lun, the one I mounted in a directory under filesystem. I can't find the device for the second lun

View 1 Replies View Related

Debian Configuration :: Reboot Both The Server And The Client Machines Every Time Change The SAMBA Configuration?

Apr 5, 2010

I am *finally* getting around to rebuilding my file-sharing computer. I'll be sharing files with both Linux and Windoze machines. It's a home network, so there's nothing fancy needed. I know I have to tweak my smb.conf file until I'm satisfied with the features and security. I'm using SWAT and I'm starting with a bare-bones conf file. It's not secure but I can see the server and selected files/directories from my other Linux box.

My really dumb question is, do I have to reboot both the server and the client machines every time I change the SAMBA configuration? I thought I just had to stop and restart the SAMBA service in the SWAT software - but then the server disappears from my client. It looks like I need to reboot both machines for the client to see the server.

View 1 Replies View Related

Debian Configuration :: Fstab Configuration - Failed To Open /proc/filesystems: No Such File Or Directory

Aug 23, 2011

I have some errors when run the mount -all command: mount: wrong fs type, bad option, bad superblock on /dev/sdc5, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so Failed to open /proc/filesystems: No such file or directory


View 14 Replies View Related

Debian Configuration :: Fstab Configuration And Timeout - Automatically Continues Booting Even If The Hard Drives Are Not Attached?

Aug 3, 2011

I have a PC104 running debian. I have 3 hard drives (in addition to the one booting) mounted in fstab by UUID. I use the options defaults,error=remount-ro. However, this means that when I boot with the hard drives not attached, I have to press Ctrl-D to bypass when the boot discovers the drives are missing. Is there a timeout commandoption I can add to fstab so that it automatically continues booting even if the hard drives are not attached? I could not find anything on a timeout command. (I tried adding timeout=1000 but no-random guess)

View 5 Replies View Related

Debian Configuration :: Boot Via PXE, "no Default Or Ui Configuration Directive?

Mar 19, 2011

A week ago I opened this thread viewtopic.php?f=17&t=61580 in "Board index ‹ Help ‹ Installation" and asked for a moderator to move this to here. Because it hasnt happened up to know, I am reopening the thread here. It would be reeeeally great if somebody could help me with my problem!

I own two computers, one netbook and one laptop. I want to boot my netbook as a diskless client via PXE.I set up a dhcp-, tftp and nfs-server on my laptop but when i boot my netbook, the follwoing messages are displayed:(to make it more clear, i uploaded the whole output and shortened the output below)


View 1 Replies View Related

Debian Configuration :: No Longer Allowed To Access The System Configuration

Jul 31, 2011

I am using Squessze and Gnome. When I try to use the gui System>Administration>Network or Users and Groups I get the error The configuration could not be loaded. You are not allowed to access the system configuration.Everything was working before. I read around a bit. In some cases,it was caused by mismatching group and password files after using the gui. I do not know how to check if they are matching. Of course I do not know for sure that is the problem in my case.

View 14 Replies View Related

Debian Configuration :: Coding The Apache2 Charset Configuration?

Mar 5, 2010

I use apache2 with virtual host and I 've a solution of Webftp who run on it. This solution send automatically email when a new client register himself. In the header of the mail I look this "Content-type: text/html". But when I look this mail with Outlook 2007 the accents are bad coding.It's a script who generate this Html content email.

View 1 Replies View Related

Debian Configuration :: Exim4 Configuration For Local Addresses

Jun 17, 2010

I am working on a Debian 2.6.26-19 Distribution with exim4 as MTA. After a system restart a problem occurred with delivering emails to local addresses. These local addresses use a 1and1 mailserver for email. The MX records for the local domain are set correctly but exim does not use a DNS lookup for these addresses because it identifies them as local addresses. I figured this out by executing the exim4 -d -bt command. The dns lookup part of the result looks like this (I replaced the actual address with placeholders):


The eventual result of the exim4 -d -bt command is: [user]@[domain.ext] is undeliverable: Unrouteable address How can I make sure, that exim4 makes a DNS lookup for the local addresses instead of skipping it? I know that I have to edit a exim4 configuration file, but I could not figure out which and how.

View 1 Replies View Related

Debian Configuration :: Squeeze D-u - Kernel Configuration Skipped

Jul 6, 2010

I have a set of vm's with stable, testing, and sid to keep track of how things are going. When I did an apt-get dist-upgrade with squeeze last week, things seemed to OK (350 package updates) until the end. It didn't seem to like and / or was confused by a kernel dependency.

I am not too concerned yet. Because these are in vm's, I do a snapshot before any significant change. I can futz around with impunity because I have that backup.

I re-booted, and tried the apt-get dist-upgrade again with same results. I think I also tried apt-get -f install.

So I reverted to the snapshot, and will simply try again in the future. I recall that with lenny as testing, the font-desktop was really screwed up for about a period of 6 weeks.

However, just in case someone else runs into this:

1) a re-boot worked, but the failure of apt-get made me nervous enough to revert.

2) waiting for corrections has seemed to work in the past (with a single exception with a 4-disk SCSI software RAID10 update that failed to re-boot lenny successfully after what seemed to be a minor update -- that was on a real system, not a vm. I haven't gotten back to look at that.)

View 14 Replies View Related

Debian Configuration :: Get The Windows One Working Again - Grub Configuration

Oct 3, 2010

I was trying to get the Windows one working again. Here's what fdisk -l reads:


I'll change these or do some grub configurations, if anyone knows what ones can work.

View 1 Replies View Related

Debian Configuration :: Saving Configuration And Packagelist For Reuse?

Nov 14, 2010

I have problems with the system harddrive. I would like to install my Debian on to a new HDD with the same configuration and packages. How do I get the configuration to the new Debian. What files/directory do I need to copy? How do install the same packages?

View 4 Replies View Related

Debian Configuration :: Kannel Configuration For Huwei GSM Modem

Jan 24, 2011

To configure SMS gateway using Kannel configuration for Huwei GSM Modem

dmesg gives attached modem in my system:

View 2 Replies View Related

Debian Configuration :: Bind - Zone Configuration Error?

Apr 30, 2011

I have a problem with the configuration of the NS zone. Looked through the logs, and there:

Apr 28 21:20:19 szewczyk named[18340]: /etc/bind/ no current owner name
Apr 28 21:20:19 szewczyk named[18340]: zone loading from master file /etc/bind/ failed: no owner


View 1 Replies View Related

Debian Configuration :: Xfinity WiFi Configuration

Feb 22, 2016

I should be able to access xfinitywifi hotspots. /etc/network/interfaces and /etc/wpa_supplicant.conf. I don't want to use NetworkManager for this connection.> iw dev wlan0 scan

BSS 60:02:92:e6:78:0a(on wlan0)
TSF: 1619575398784 usec (18d, 17:52:55)
freq: 2437
beacon interval: 100 TUs
capability: ESS ShortPreamble ShortSlotTime (0x0421)
signal: -65.00 dBm


View 0 Replies View Related

Copyrights 2005-15, All rights reserved