Debian Configuration :: Can't Print From A CANON LBP6020 Printer

Aug 4, 2015

I have the printer Canon i-SENSYS LBP6020. I followed the instructions from the site URL....There are no errors, but when I try to print, nothing comes out of the printer.My system is: Debian GNU/Linux 8 (jessie)Here is some debugging information:

Error log while printing from a CANON LBP6020: URL....
Troubleshooting information while printing from CANON LBP6020: URL....

View 3 Replies


ADVERTISEMENT

Ubuntu :: Canon Mp470 Printer - 10.10 - Able To Print Black And White But Unable To Print Photos

Dec 26, 2010

My wife has a canon MP470 printer and running ubuntu 10.10. I am able to print black and white, but unable to print photos. I got it to work using another driver, but not the 'correct' one for this printer. I have searched a bit and don't see anything about ubuntu 10.10, just older versions. Or should I just network her to my printer....?

View 5 Replies View Related

Networking :: Print Wirelessly On MP800r Canon Printer?

Dec 2, 2010

I would like to know if it is possible to configure my laptop so that it can print wirelessly on my MP800r canon printer, and if so then how to configure them to make this operation possible. I'm using Ubuntu.

View 1 Replies View Related

Debian Configuration :: Cannot Print With HP2600n Network Printer

Jan 11, 2011

I run Debian Squeeze but I have the system installed step by step from minimal installation. So I'm not sure if I have forgotten basic packages important for printing. I open system-config-printer to add a new network printer. In the list of the Network Printers after some seconds it appears the HP Color LaserJet 2600n. I chose it and hit Forward. A new window opens that says that system is searching for Drivers and finally I'm ready for printing.

[Code]..

View 1 Replies View Related

Fedora Hardware :: Canon S100 Printer Doesn't Print

Sep 6, 2010

F13 showing that Canon s100 printer is founded, installed drivers and everything seems to be OK. But when i try to print text, testpage of what ever, nothing happened. Installed system-config-printer 1.2.4-1.f13, same udev and libs. Cups 1:1.4.4.5.f13, libraries, php modules Here is the Error msg:

[code]...

View 14 Replies View Related

OpenSUSE Hardware :: Canon MF4150 Printer Does Not Print Anything After One Printing?

Oct 23, 2010

I have Canon MF4150 printer. I have downloaded Linux Printer Driver (UFR II) Ver.2.10E from canon asia site. Adding the printer and printing work fine, except that after one printing, the printer stops working. There is no error message./var/log/cups/access_log shows

Code:
localhost - - [23/Oct/2010:19:53:55 -0500] "POST /printers/Canon-MF4100-Series HTTP/1.1" 200 45240 Print-Job successful-ok

[code]...

View 1 Replies View Related

Ubuntu :: Canon Pixma Ip90v Bluetooth Printer Cant Print?

Mar 10, 2011

I am looking for a good new ALL IN ONE printer that will be compatible with Ubuntu right out of the box (scanner and everything).

I am also looking for a portable bluetooth printer that will be compatible. I currently have a Canon pixma ip90v bluetooth printer but I cant get it to print AT ALL and Ive tryed everything.

I am currently running 3 computers with Ubuntu 10.10 and one with 11.04 Alpha 3.

View 4 Replies View Related

General :: Get The Configuration Page For A Canon PIXMA IP1600 To Print?

Jul 20, 2011

How do I get the configuration page for a Canon PIXMA IP1600 to print?

View 1 Replies View Related

OpenSUSE Hardware :: Printer (Canon MX700) Configuration On 11.4

Sep 6, 2011

I have just installed OpenSuse 11.4 on my old desktop Compaq Presario, I coming from an amount of experience with Linux, anyway, for the moment I have a problem with my printer connected on a domestic network, this printer have an assigned address as the same as for my desktop and all other devices of this network, but I'm not able to connect with it, if I try to connect the printer by USB I haven't no problem, more strange is because of the printer have got a scanner and I was able to connect it via network, the same problem I had with Ubuntu.

View 9 Replies View Related

Debian Hardware :: Canon MX922 Found But Won't Print

Sep 12, 2013

I am trying to install a Canon MX922 printer on LMDE.

I ran ~/Downloads/cnijfilter-mx920series-3.90-1-deb (install.sh wont find wired lan printer with IP 192.168.0.14)

Installed these:

cnijfilter-common - IJ Printer Driver for Linux.
cnijfilter-mx920series - IJ Printer Driver for Linux (these repo drivers don't even show up when I go to add printer)

I tried system / admin / printing / add printer (and it FOUND the printer! But it won't print.)

View 6 Replies View Related

Debian :: Canon Printer - Lp0 - "Printer Not Connected -- Check Your Connection"

Jul 31, 2011

I have a canon printer which was working so far. After my latest upgrade its giving errors saying "Printer not connected -- Check your connection" Fortunately I had a backup of my root before the upgrade and one difference I see is that on the new system theres no /dev/usb/lp0 which there is on the old one. So how do I make it? Or should I use the /dev/lp0? Note they are different:

[Code].....

So (naturally) when I tried to make a softlink from /dev/usb/lp0 to /dev/lp0 it did not work.

View 10 Replies View Related

Debian Hardware :: Installing Canon Printer Drivers To Jessie

Aug 4, 2015

My purpose is to be able to use Canon printers with my debian jessie system (installed via netinst iso).

I have read this wiki page but unfortunately it is a little old. I still have followed/adapted the instructions there but it fails on my system on step 6. I will explain below.

Latest Canon drivers in the official website is v3.10. US version of it can be obtained from here.

When I try to install .deb package in the driver file archive I get following output:

Code: Select allsudo dpkg -i cndrvcups-ufr2-us_3.00-1_amd64.deb
[sudo] password for ert:
Selecting previously unselected package cndrvcups-ufr2-us.
(Reading database ... 155527 files and directories currently installed.)
Preparing to unpack cndrvcups-ufr2-us_3.00-1_amd64.deb ...
Unpacking cndrvcups-ufr2-us (3.00-1) ...

[Code] ....

And the next thing I tried:

Code: Select allsudo apt-get install cndrvcups-common
[sudo] password for ert:
Reading package lists... Done
Building dependency tree       
Reading state information... Done
Package cndrvcups-common is not available, but is referred to by another package.

This may mean that the package is missing, has been obsoleted, or is only available from another source. However the following packages replace it:

  cndrvcups-ufr2-uk cndrvcups-ufr2-us

E: Package 'cndrvcups-common' has no installation candidate

I cannot solve this package error.

View 2 Replies View Related

Debian :: Unstable - Upgrade Canon Printer - 'cups' Removed Official Drivers

Jul 1, 2010

I dist-upgraded my Debian unstable and 'cups' removed the official drivers ('cndrvcups-common_2.00-2_i386' and 'cndrvcups ufr2-uk_2.00-2_i386'). Well, now my network Canon i-SENSYS MF4120 multifunctional printer/scanner doesn't work and the drivers can't be installed back

View 11 Replies View Related

Debian :: Using Squeeze And A Canon Pixma IP4600 Printer - Printers Color Isn't True

Oct 29, 2010

Using Squeeze and a Canon Pixma IP4600 Printer. The color on the printed pages used to be true and now it isn't, it still print is color just not the correct colors.I am color deficient or color challenged (what used to be called color blind) which dosen't mean I can't tell the difference between what is on the screen and what is printed It's not the printer as I have tested it with other Linux and a windows system and it's good.

View 2 Replies View Related

Ubuntu :: Printer Server Configuration - Share To Users And Limit The User In Taking Print Outs?

Jul 26, 2010

I am trying to configure linux printer Server.

Setup : Using Centos 5.3
Printer : hp 4350

At present we are using windows print server getting user name and authenticated from domain server. I need your suggestion to configure linux printer server and how to share the printer to users and how to limit the user in taking printouts.

View 1 Replies View Related

OpenSUSE Hardware :: Parallel Port Printer Configuration On 11.2 64 - "There Is No Print Queue"

Dec 13, 2009

I installed SuSE 11.2 64-bit on a new computer without any printer attached. When I read the manual for the mainboard, I discovered to my delight that it actually has a parallel port, it's just not connected. I moved the cable from an old desktop and put it into my new desktop. After enabling the port in the BIOS setup, the Hardware Information dialog in yast correctly shows that I have a HP LaserJet 1100 (/dev/lp2).

How do I configure the printer? "Printer" in yast tells me "There is no print queue". When I click "Add" yast tries to detect a printer and gives up with the message "No connection selected". I can't add a selection, however. "More connections" gives me the exact same error message. The "Connection Wizard" allows me to select "Parallel Port", but then complains about missing connections again. The cups demon is running. I don't have /dev/lp2, is that the problem?

View 9 Replies View Related

Debian Configuration :: "Windows Printer Via Samba" Option - Add One By Selecting Add->Printer

Aug 11, 2011

I'm using an up-to-date installation of Squeeze with the default Gnome desktop and am trying to print. My knowledge of configuring printers is very limited if it even exists. Since a friend of mine is able to print from her Ubuntu computer, my plan is to copy her. Here's how she does it. She goes under System->Administration->Printing on the desktop. Then a window pops up titled "Printing" that lists various printers that are supposed to exist. It's possible to add one by selecting Add->Printer. It asks for the root password and then a new window pops up titled "New Printer" which has a subwindow called "Select Device" In my case, the "Select Device" window has the following options to choose from:

- AppSocket/HP JetDirect
- Internet Printing Protocol (ipp)
- LPD/LPR Host or Printer

In her case, she has an extra option called "Windows Printer via Samba". This is the option that she uses. The other options don't seem to work for her. I'm assuming that I just need to install some package in order to make this option magically pop up for me. Does anyone know what package this may be? I currently have the packages smbclient, samba-common and samba-common-bin installed..........

View 1 Replies View Related

Ubuntu :: Can't Print With Canon MX860

Jun 6, 2010

I cannot print with my Canon MX860. I have downloaded the proper drivers from the Canon Europe website and forced the arch to x64 as described on many sites. When I try to print a test page I get the error that "Idle - /usr/lib/cups/filter/pstocanonij failed". I have checked in lib64 and pstocanonij was there as well. If I change the URI from USB to CNIJUSB then I get the error that "cnijusb has failed". It may be possible to get this working as in another forum someone claims to be successful. I am able to use the scanner with the sane-backends package, so that is not a problem.

View 6 Replies View Related

General :: Can't Print To Canon I550

Jan 24, 2010

OS: Kubuntu 9.10
Printer: Canon i550

I have tried selecting many of the drivers located on localhost:631 and none of them work. i550 is not in the list of drivers. When I select i560 it will print if it is only one line after that it seems to get confused and doesn't print. Sites that I have looked at [URL]...

View 14 Replies View Related

Ubuntu :: Cant Even Get Canon Ip6301D To Print

Aug 15, 2010

it is shown as my default printer, and even spits out a sheet when I try to print something. The 'Test Page' actually includes some ink and lines but does not look like the real thing.

View 5 Replies View Related

CentOS 5 :: Canon Mf 4018 Could Not Print In 5.5?

Jan 2, 2011

My canon mf 4018 could not print in Centos 5.5 What I did before: I chose Administration/printing and there I tried to add new printer. Unfortunately, I could not find my model of the printer in that list. I used also official canon site to find a driver for Centos 5.5.

View 2 Replies View Related

Hardware :: Fail To Print With Canon LBP3010

Dec 21, 2010

After I install my print Canon LBP3010 following this instruction: Fail to print with Canon LBP3010

[Code]...

View 3 Replies View Related

Fedora Hardware :: Couldn't Print Using Canon LBP 2900B

Feb 4, 2010

Recently brought new printer Canon LBP 2900B.

I have downloaded drivers form canon website ([URL])

When I switch on the printer, it will be detected.

But when I click print button in any of document, it won't start printing. In job queue status shows "Processing". I have waited for 15 minuets printing didn't started.

View 14 Replies View Related

Ubuntu :: Canon Pixma IP2600 Ready For Use But No Print Out

Feb 12, 2010

I just bought a new printer yesterday. It is a Canon Pixma iP2600 series. I connected everything properly and my computer found the drivers and told me the printer was ready for use. However, when I tried to print out a test page the computer said it was printing, the printer was flashing as it should, but nothing was printing out. Is there some switch I need to turn on or off? Is there something that I need to type in or delete somewhere? The old printer was a HP deskjet and it did work even if it was a little slow being that it is over 8 years old.

View 6 Replies View Related

Ubuntu :: Using Canon Pixma MG5220 - How To Print To It From My Computer

Apr 7, 2011

I recently purchased the canon pixma mg5220 and am currently figuring out how to print to it from my computer.

First of all, I dont know how to connect to it (its a wireless printer btw and is currently connected to my wireless router). I went to the "add new printer" part of the printer utility and selected "Find Network Printer." I dont know what to type in for "host" however. Right now i have a temporary fix of sharing the printer on my laptop (which runs windows) and printing through that.

Second of all, drivers. I found http://ubuntuforums.org/showthread.php?t=1588333 and downloaded the drivers (to my downloads folder) from the link provided, but I can't figure out how to install it. The post says to run the install.sh but it seems to be just a text file, and when i right click it, "properties" is not an option, so i cant mark it as executable. How would can i run this file to install the drivers?

View 1 Replies View Related

General :: Can't Get Ubuntu 11.04 To Print On Canon Pixma Ip2772?

May 27, 2011

I can't get my ubuntu 11.04 to print on canon pixma ip2772, it says that I got canon ip2700 series installed, and show that I am printing a test page, but nothing happens on the printer.

View 4 Replies View Related

General :: Unable To Print To Canon Pixma 1800

Apr 22, 2011

Running Ubuntu 10.10, when trying to print to canon 1800 print file is created, spooled to printer but does not print. Job appears in print Q and ends as finished job, next job number increases correctly. Printer light flashes to indicate data in,, but nothing out on paper !! (printer works fine on "the Other" OS!

View 4 Replies View Related

Debian Configuration :: Finger Print Reader?

Jan 22, 2010

debian unstable system i have a problem with thinkfinger. By default i should only swipe my finger and i don`t have to press enter after that. The problem is that now i have to press enter. For example in GDM if i enter my username i should swipe my finger and it should let me log in. Now after i swipe my finger nothing happenes unless i press enter.The problem may be related to the update of xorg. The same problem has been reported here: Is there anyone here who uses thinkfinger who could possibly have an idea why is this happening?I am using thinkfinger 3.0 on debian unstable with kernel 2.6.32-amd64, xorg 1.7.4, SGS Thomson Microelectronics Fingerprint Reader and GNOME. Other than the having to press enter i have no problems with thinkfinger. I am have patched thnikfinger with two patches:This patch solves the problem with thinkfinger taking too long to intialize:

Index: libthinkfinger/libthinkfinger.c
===================================================================
--- libthinkfinger/libthinkfinger.c(revision 118)

[code]...

View 2 Replies View Related

Hardware :: Canon Pixma MP250 - Slackware 13 It Doesn't Print

Apr 29, 2010

Trying to make a Canon Pixma 3-in-1 MP250 to work with my Slackware. I've took the drivers from the canon website (they have .deb, .rpm and sources there) and compile. Basically I followed the instructions from INSTALL files in each subdirectory (backend,cngpij, etc).

Then I upgraded also CUPS to 1.4.3.

Installing the printer in CUPS, I end up with:

Code:
Description:Canon MP250 series
Location:
Driver:Canon MP250 series Ver.3.20 (color)
Connection:cnijusb:/dev/usb/lp0
Defaults:job-sheets=none, none media=iso_a4_210x297mm

It seems ok. But when I send a test page (or any other kind) to printer, it shows some activity on the led display, cups reports the job as completed but nothing happens!

As an extra, I tried to convert .deb packages to .tgz and install from them. The same result, except now the scangear utility is working (so scanning is ok).

How can I find what's missing from here? Maybe it's a bug with cups/drivers or something is missing from configuration?

p.s. On other machine I have an Xubuntu (Karmic Koala). Installed there from .deb packages and the printer works as expected.

View 3 Replies View Related

Debian Configuration :: Setup A Print Sever With Lenny?

Jan 19, 2010

I'm trying to find good instructions to help me set up a print server with a usb printer on a Lenny box with no GUI. The printer is a Brother HL-2170W. Can anyone point me in the right direction?

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved