Debian Configuration :: Can't Hibernate On Squeeze

Dec 20, 2010

I use my laptop at the college, and I've to suspend him frequently. So, I've decided to install the package pm-utils, to hibernate my PC, instead of power off it. When I try to do "# pm-hibernate", a tty appear, and this error is displayed :

[3506.405310] pm_op(): usb_dev_suspend+0x0/0xa [usbcore] returns -2
[3506.405310] PM: Device usb1 failed to freeze: error -2
This is the result in pm-suspend.log :
Initial commandline parameters:

[Code]....

View 14 Replies


ADVERTISEMENT

Debian Configuration :: Squeeze: Suspend/hibernate Resume Fails With Radeon Graphics

Aug 6, 2010

I am running Squeeze on an older Compaq EVO laptop with radeon graphics.

A few months ago, after an upgrade, suspend and hibernate stopped working. The suspend or hibernate worked fine, but the resume just hung with a black screen. I finally got around to looking into it and found a workaround.

The workaround is to disable Kernel Mode Setting for the radeon. This can be done by adding the boot parameter "radeon.modeset=0" or by editing /etc/modprobe.d/radeon-kms.conf so that it includes the line "options radeon modeset=0".

If you are interested in the details, you can search for problem reports related to radeon kernel mode setting.

View 3 Replies View Related

Debian :: Squeeze Failing To Hibernate?

Jul 30, 2011

I've had a problem trying to hibernate, sleep doesn't work either, when I try it starts to hibernate but then the screen flashes and when I move the mouse I'm returned to my current X session. I see the following in dmesg

PM: Device usb10 failed to freeze: error -2
[ 682.481822] sd 0:0:0:0: [sda] Starting disk
[ 682.798713] Restarting tasks ... done.

Apparently this notation points to a USB root hub, I have a USB 3 capable MB and I saw few mailing lists suggesting this was a bug but I can't find a fix, anyone out there resolved this?

cat /proc/version: Linux version 2.6.32-5-amd64 (Debian 2.6.32-35) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP

View 3 Replies View Related

Debian Multimedia :: Squeeze: Use Hibernate Function On Fluxbox?

Jan 28, 2011

I upgraded from Lenny to Squeeze.

I use Fluxbox as the window manager in X Window. I installed hibernate packages and gnome power management. I set the idle time at 30 minutes using the gnome power management program. It doesn't suspend at all. The monitor only shuts off during idle.

So, I logged in as root, started X. Without .xinitrc gnome desktop manager launched. As I clicked shutdown, it showed a dialog box asking hibernate / suspend / restart / etc. And then, I chose the [hibernate], the system shut down and came back to previous status when system restarted.

Which gnome program does control hibernate / suspend?

Is there anyway that I can control hibernate / suspend in command? I just need to make a little script and assign it to a launch key so that I can suspend the system when it's on idle.

View 8 Replies View Related

Debian Configuration :: Can Only Suspend / Hibernate As Root

Oct 28, 2015

Installed Debian 8.2 a while back, and I've been having issues with getting the machine to suspend correctly. If I try to put it to sleep when logged in to my regular user account the screen just goes black and then the computer hangs. However if I put it to sleep as root everything works fine. I do this by running this command (as root):

Code: Select allsystemctl suspend

What can I do about this? Worked fine on Debian wheezy..

Btw, just found this in the dmesg log. Connected perhaps..?

Code: Select all[    6.863018] ACPI Warning: SystemIO range 0x00000000000018e0-0x00000000000018ff conflicts with OpRegion 0x00000000000018e0-0x00000000000018ef (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-258)
[    6.863028] ACPI:

If an ACPI driver is available for this device, you should use it instead of the native driver

View 7 Replies View Related

Debian Configuration :: Laptop Won't Hibernate With SSD In Ultrabay?

Aug 16, 2010

My Thinkpad T61 just got a Corsair X256 SSD in the ultrabay (where the CD usually is). This works well except for hibernating. Earlier I had a traditional HDD drive there which also hibernates just fine.After a failed hibernate the machine hangs with this message on screen:

ata1.00: status: { DRDY ERR }
ata1.00: error: { IDNF }
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: failed command: FLUSH CACHE EXT

[code]...

And looking in the kern.log I see this:

Aug 16 18:57:00 lap kernel: [ 175.690230] hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
Aug 16 18:57:00 lap kernel: [ 175.690237] hda: task_no_data_intr: error=0x10 { SectorIdNotFound }, LBAsect=1207959552, sector=18446744073709551615

[code]....

View 3 Replies View Related

Debian Configuration :: Hibernate To Disk Not Restoring

Mar 9, 2011

I have Debian 6 (squeeze), I have also seen this under Ubuntu (can not remember how I fixed it). (has worked in ubuntu 10.10)I can hibernate, but when I switch on the system cold boots (it does not restore previous session).Note suspend works fine. Have looked in /var/log/pm-suspend.log Shows for each block of suspend suspend a block of resume suspend, but hibernate hibernate is not followed by resume hibernate ( I assume that is what is expected.)

View 7 Replies View Related

Debian Configuration :: Suspend And Hibernate Do Not Work At All

Sep 6, 2011

I've been running 6.0.2 amd64 stable since release day and recently have noticed my suspend and hibernate do not work. Normally I have transmission running and have set it to not enter sleep mode while torrents are active. However today I have not had transmission and was wanting to see if the sleep mode options would kick in. So I have set my display to "sleep when inactive for" 5 mins (this works perfect)
I have set "put computer to sleep when inactive for" 10 mins (this does not work at all)

When I try to manually test suspend my display flashes black for a few seconds but remains backlit, then asks me to log back in
When I manually go into hibernate mode my display turns off, pops back on for a second and in a terminal says something about a usb device (something failed but it happens so fast I cannot read it)

View 3 Replies View Related

Debian Configuration :: XFCE - No Suspend / Hibernate Buttons

Jun 4, 2011

I've tried editing .xinitrc to contain ck-launch-session and dbus-launch to no avail. Console kit is installed. I'm using Sid without a login manager, and xfce's suspend and hibernate work fine on my Wheezy computer. Xfce4-session and consolekit are installed. Is this a problem with permissions?

View 3 Replies View Related

Debian Configuration :: Virtualbox 4.1 Breaks Suspend / Hibernate?

Jul 25, 2011

I have installed the latest virtualbox 4.1 on my desktop and laptop. It hosed suspend and hibernate.

The laptop is A Dell D630 with Intel Core2 Duo CPU, the desktop is an AMD based ASUS M3N78-VM mobo with Athlon II x2 250 CPU. Debian Testing 32-bit (same results with the 2.6.39 and the 3.0 kernels). Both have nvidia cards though - the desktop an integrated 8200, the laptop a NVS 135M. But suspend/hibernate was working before with the 4.0 series virtualbox.

The workaround is to clear the vboxpci vboxnetadp vboxnetflt vboxdrv modules from the memory before suspend/hibernate. I added the

service vboxdrv stop
rmmod vboxpci vboxnetadp vboxnetflt vboxdrv

lines to my sleep script (i dont use power managers, just the acpi powerbutton/lid scripts modified). Everything is ok now.

View 3 Replies View Related

Debian Configuration :: Squeeze D-u - Kernel Configuration Skipped

Jul 6, 2010

I have a set of vm's with stable, testing, and sid to keep track of how things are going. When I did an apt-get dist-upgrade with squeeze last week, things seemed to OK (350 package updates) until the end. It didn't seem to like and / or was confused by a kernel dependency.

I am not too concerned yet. Because these are in vm's, I do a snapshot before any significant change. I can futz around with impunity because I have that backup.

I re-booted, and tried the apt-get dist-upgrade again with same results. I think I also tried apt-get -f install.

So I reverted to the snapshot, and will simply try again in the future. I recall that with lenny as testing, the font-desktop was really screwed up for about a period of 6 weeks.

However, just in case someone else runs into this:

1) a re-boot worked, but the failure of apt-get made me nervous enough to revert.

2) waiting for corrections has seemed to work in the past (with a single exception with a 4-disk SCSI software RAID10 update that failed to re-boot lenny successfully after what seemed to be a minor update -- that was on a real system, not a vm. I haven't gotten back to look at that.)

View 14 Replies View Related

Debian Configuration :: Hibernate Doesn't Work After Recent Kernel Upgrade?

Dec 15, 2010

I recieve the following error:

Cannot find swap device, try swapon -a
/bin/echo: write error: No such device

If I type swapon -a, I get something like this:
swapon: cannot find the device for UUID=4d79c009-9464-41d5-9f78-90644bca9ba3

It worked great before I did the upgrade... I've upgraded to 2.6.37-rc5.

View 11 Replies View Related

Debian Configuration :: TightVNC Configuration On The Squeeze?

Feb 8, 2011

I recently just installed Squeeze on an ia64 system and was having some troubles with running VNC.I get the following error, more specifically for some reason I get a malloc - memory corruption error:

Xtightvnc(9165): unaligned access to 0x60000000001ea06c, ip=0x4000000000268280
Xtightvnc(9165): unaligned access to 0x60000000001ea074, ip=0x4000000000268280
Xtightvnc(9165): unaligned access to 0x60000000001ea07c, ip=0x4000000000268280
Xtightvnc(9165): unaligned access to 0x60000000001ea084, ip=0x4000000000268280

[code]...

After display all the code above, it just stops. The port 5901 is still closed - if it runs properly, would it open automatically?Is there something that is incompatible? Or am I missing some system configuration component?

View 1 Replies View Related

Debian Configuration :: Dropbox Install For Debian Squeeze From Source Code

Feb 19, 2011

how to install Dropbox for Debian Squeeze from source.Please read everything before you begin. I prepared it as I installed Dropbox for my own system. Please Note: I use sudo, you may have to use root or 'su' from the command line. If you don't know the difference between sudo and su, then you shouldn't try this until you know. At the time I did this, the lastest dropbox version was 0.6.7.

View 7 Replies View Related

Debian Configuration :: Installed Firestarter Firewall On Debian Squeeze?

Apr 5, 2011

I installed Firestarter firewall on debian Squeeze.Now i note there is a gui available in System->Administration which apparently does not need to be running all the time - its not set up to start on boot.When I boot I notice the boot message has a line saying "Starting Firestarter firewall .... failed"When I am logged in and type "/etc/init.d/firestarter status" as the Firestarter FAQs say, I get"Firestarter is running... ... (warning)"I can run the gui manually and still same message.

View 2 Replies View Related

Debian Configuration :: Using Tor In Squeeze?

Aug 28, 2011

When I activate Tor in Iceweasel, it forbids me access to the internet completely. Even attempting Google results in "Iceweasel is configured to use proxy server that is refusing connection".

I have seen this in Lenny, too - it was caused by activating Tor without having installed privoxy. I installed privoxy and everything was okay. In Squeeze, Tor is using polipo. Polipo is installed and running. I have not played with settings of polipo or Tor, the configuration is the same as it was after installation.

What can be wrong? I am a rather an user than a networking guru. I am connected to internet by means of DHCP, no local lans, no special routings, no additional proxies. I have already tired to reinstall polipo.

View 2 Replies View Related

Debian Configuration :: ATI Driver For Squeeze

Feb 15, 2010

Just installed squeeze on a new laptop(had been runny Lenny on my older one with no issues, but no sound or wireless on the new one).I decided to install the ATI drive for my Radeon Mobility 4500(or some close revision) because the fan is constantly running and based on some other postings, it seems that it could be the graphics card causing it.Downloaded the driver from ATI's site and it seemed to install fine but when starting X.

View 11 Replies View Related

Debian Configuration :: Downgrade From Sid To Squeeze

Jun 20, 2010

When I try to downgrade from sid squeeze I don't get GDM running just a login promt after a reboot.Have also reinstalled nvidia driver but still only login promt.I did aptitude update and aptitude full-upgrade after changing sources.list from sid to squeeze.

View 2 Replies View Related

Debian Configuration :: NTFS In Squeeze?

Oct 19, 2010

Got a problem mounting my Windows partition in Squeeze. It keeps refusing to mount it for me in Dolphin. I am a member of the disk and fuse groups, /dev/fuse is owned by root:fuse, and /sbin/mount.ntfs points to /sbin/mount.ntfs-3g, which in turn points to the ntfs-3g executable. I kind of need this ASAP. I am supposed to be finishing with this machine in 35min, and I am dead in the water without the ability to copy some files from the Squeeze ext4 partition over.

View 14 Replies View Related

Debian Configuration :: Kernel BUG In Squeeze 2.6.32-5-686 ?

Oct 21, 2010

I installed Debian Squeeze from a net install to a raid 1 array. I have been having a lot of troubles related to being able to write to one or more of the mounted drives - even touch gives me errors.

The most interesting line from dmesg is:

Here is the full output from dmesg:

I found a thread that indicated that this bug was fixed in the next kernel version: 2.6.32-6. I am willing to upgrade the kernel to get rid of my problems. Is a squeeze kernel at 2.6.32-6 or higher available? If so, where? I have not compiled my own kernel, and am not very interested in getting into that.

View 8 Replies View Related

Debian Configuration :: Squeeze And Php 5.3.x - Reverting To 5.2.x?

Feb 6, 2011

I have upgraded my server to Debian 6.0 Squeeze but it looks like some of my sites are not compatible with PHP 5.3.x so I would like to revert to previous 5.2.6 version.So my question is what to do?a) Remove PHP 5.3.x from system via apt-get and install my old 5.2.6 from old archives at /var/cache/apt/archivesorb) just try to update from archives PHP to 5.2.6?

-rw-r--r--. 1 root root 2413316 May 11 2008 libapache2-mod-php5_5.2.0-8+etch11_i386.deb
-rw-r--r--. 1 root root 2413290 Oct 6 2008 libapache2-

[code]...

View 10 Replies View Related

Debian Configuration :: No Knetworkmanager In Squeeze?

Feb 6, 2011

As a long time user of some other distributions I decided to switch to Debian and installed 6.0 from amd64 kde cd image.Upon logging to KDE I discovered thatant locate knetworkmanager anywhere,it doesnt autostart and I could not find it anywhere else.I am connecting through a wireless network to the Internet so I cant connect through the Ethernet to download it through apt-get for example,if it is not installed by default.lly confused,knetworkmanager is standard tool in KDE but I cant find it in Debian 6.0

View 9 Replies View Related

Debian :: Trying Out Squeeze / Configuration Could Not Be Loaded

Dec 14, 2010

A couple days ago I installed Debian Lenny (netinst) to my friend's laptop, a IBM Thinkpad T23. Got a black screen after gdm loaded and the laptop seemed frozen. Decided to upgrade to squeeze. I edited the apt sources file and changed all the instances of lenny to squeeze, and then upgraded.Had the same display problem, but found a web site that suggested disabling acpi. So I did that, got the sound working, (needed cs46xx firmware), and all seems to be running fine.I get some weird udev messages at boot time, but I have a feeling that's due to how I upgraded. I can't copy and paste since the messages aren't in my system log. If anybody wants more information about it, I can supply it. pgrep shows two instances of udev running so it appears the messages are only warnings.When upgrading to squeeze, I used tds.net debian mirror links. Earlier today I switched to Debian's official US repo URLs and had to upgrade about 250 packages after reloading package data.

Now, when I click on System -> Administration -> Time and Date.After a couple seconds I get a dialog box that says "The configuration data could not be loaded" in bold black letters. Underneath that in smaller letters, "You are not allowed to access the system configuration" I receive that same error when accessing "services" and "users and groups."But I can access the synaptic package manager and update manager from the administration submenu.

View 4 Replies View Related

Debian Configuration :: Missing CD / DVD Device In Squeeze

Apr 3, 2010

I've been testing Squeeze to determine whether KDE4 is finally suitable for my primary machine. Everything seems to be working fine except for detection of IDE devices. My CD/DVD drive no longer automounts and the reason seems to be that no device is being created. My Lenny system detects the drive as /dev/hda, but no such device exists in Squeeze. During boot, Squeeze appears to detect the drive as /dev/sr0 (according to dmesg), but in fact that device does not exist either.I'm actually running the Lenny kernel, as I am unable to compile my Ralink wireless driver (rt2860sta) using the Squeeze kernel. Also, for inquiring minds, I use removable HDD drive bays on my systems to simplify testing.

View 9 Replies View Related

Debian Configuration :: Does Live-helper Not Like Sid Or Squeeze?

Apr 13, 2010

I have been trying to build a Debian-live-version for some time using live-helper. It works fine if I choose lenny as distribution. With sid I always get into trouble.Sometimes live-helper does't find any aufs-modules but it stops looking for them if I keep the options as simple as above.What is the problem of live-helper's to build on sid or squeeze (which I have met similar troubles with)?

View 10 Replies View Related

Debian Configuration :: Prevent Squeeze From Being Like The Borg?

May 28, 2010

Alright, first Squeeze wouldn't create an initial RAM disk even with "--initrd" specified. Now I don't need one and it's creating one for me even though I don't want one! How do I stop this? I'm beginning to feel like I am using Windows in the sense that it's doing things on its own. Don't make me a RAM disk unless I say so!

View 10 Replies View Related

Debian Configuration :: Accidentally Upgraded Squeeze To Sid?

Jun 16, 2010

I just noticed that I had a sid line on my sources.list, at the end of all squeeze lines, and I've been updating more or less regularly. Does the ordering imply some sort of "preference", so that the first lines are preferred over the subsequent ones, or is it all about the latest version?After removing that line, and taking a look at my installed packages with synaptic, all the "latest versions" of the packages seem to be the ones that are already installed, and I click on properties, and there are no older versions available, only "##.##-### (testing)". Emphasis on "testing", rather than "sid" or "unstable". Of course I didn't check all of them, but about a dozen, and none deviated from that pattern. However, I went to double check on the web pages about the packages, and it seems that many of the squeeze's packages are at the same version of sid. I couldn't yet find one that is not.perhaps the sole fact that the sid line was on sources.list is enough to know that something happened -- as I don't recall having ever set up those configuration files about preferred sources/pins or however it's called), and suggestions on how to proceed? My hunch would be to just downgrade things gradually as they eventually fail (as I did with geeqie, which is why I suspect that there is some mess), but leave everything alone. Not try to fix what is not quite broken. And if it fails too often, go full-blown sid.

View 14 Replies View Related

Debian Configuration :: CUPS Not Working In Squeeze?

Jul 6, 2010

I don't print much, but tonight needed to print and found that none of the printers were listed in Okular or Openoffice, then when I tried to open Cups Administration http://localhost:631/ I got the error message Connection to Server Refused

View 4 Replies View Related

Debian Configuration :: Sloow Nfs After Upgrade To Squeeze?

Aug 22, 2010

1) old a1300 laptop: P3 800, 256 MiB RAM, HDD, PC-CARD NIC. from lspci: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10) with debian (i386), previously lenny, now squeeze. running as server.

[Code]...

Smaller files seem to transfer faster, but I have no idea why. I've checked with ethtool that both NICs are running at 1000Mb/s, and both are connected to the same Gigabit switch. The HDD in the laptop had previously provided (nfs) transfer speeds of 12-13 MiB/s. The options in fstab on the client are what I've changed them to since, while trying to fix the problem. Can't remember exactly what they were, but rsize, wsize and nfsvers are some I put there trying to fix it.

I had considered buying a new, faster HDD for the laptop, but that is certainly out of the question until this is resolved. Edit: Is this the right place to ask about this? I did wonder if the 'General Questions' category was a better fit.

View 1 Replies View Related

Debian Configuration :: Cannot Change Prompt In Squeeze

Dec 3, 2010

I looked into my shell 'profile' on my running lenny and copied the PS1 definition over to my [virtual] new squeeze machine, but astoundingly, the prompt does not change!

The prompt always remains to be like this:${debian_chroot:+($debian_chroot)}u@h:w$

This does definitively not stem from 'profile' and I cannot find, where it is defined and how I can override this. If I do it interactively, in a terminal [terminal running in Gnome], it works like expected. In that script, even if I use 'unset PS1',followed by PS1= ... / export PS1, it does not change,Someone with the knowledge and/or a good idea would be great!

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved