Debian Configuration :: Blender Crashes On Open Radeon-graphix

Jan 18, 2016

I have this one comp with an Radeon (MSI-R7850) card in it and its been working fine untill I tried to open Blender (3D creation Studio) today. Blender pops open and crashes. I opened it in command line to get the output but I dont know where to go from there. Blender used to work just fine on this comp. does on my others (they're NVidia).

output;
Code: Select all:~$ blender
X server found. dri2 connection failed!
connect failed: No such file or directory
X Error of failed request:  BadLength (poly request too large or internal Xlib length error)
  Major opcode of failed request:  157 (GLX)
  Minor opcode of failed request:  1 (X_GLXRender)
  Serial number of failed request:  161
  Current serial number in output stream:  164

comp;
Code: Select all~$ uname -a
Linux node-1 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt20-1+deb8u2 (2016-01-02) x86_64 GNU/Linux

View 1 Replies


ADVERTISEMENT

Fedora :: Blender 3D Not Working After Update Kmod Kernel - Unable To Open Blender Window

May 18, 2009

I put kmod for nvidia driver on my Fedora 9 ! I update kernel and now when i try to start blender i have this errors :

Code:

blender
Compiled with Python version 2.5.1.
Checking for installed Python... got it!
ERROR: Unable to open Blender window

[code]....

I download blender 2.48 and 2.49 Rc static version ! [URL] But is started old version 2.48a . If i try to start from gnome menu ( graphics ..) blender 2.48a but not working !

View 3 Replies View Related

Debian Multimedia :: No 3D With Radeon HD 4200, Open-source Drivers?

Feb 21, 2010

I'm running a Squeeze system on a PC with an ATI Radeon HD 4200 graphics card. Until recently I had been using the fglrx drivers without difficulty, but a recent upgrade removed fglrx - apparently this is because ATI has yet to release drivers for Xorg 1.7. So I've switched to the open source driver (radeon), but am not getting any 3D acceleration - hence can't run desktop effects in either kwin or compiz. When I run "glxinfo | grep OpenGL" I get the following:

OpenGL vendor string: Mesa Project
OpenGL renderer string: Software Rasterizer
OpenGL version string: 2.1 Mesa 7.6.1
OpenGL shading language version string: 1.20
OpenGL extensions:

It's the software rasterizer that is the problem, I gather. After Googling for similar problems encountered by others, I've installed firmware-linux and firmware-linux-nonfree, but to no effect. All fglrx-* packages are purged. Does anyone have any other thoughts? (I don't currently have an xorg.conf file in use.)

View 10 Replies View Related

Debian Configuration :: Installing Radeon Drivers For Wheezy?

May 27, 2011

I need some help installing the driver. I am very noob. so when I try to build a deb file with sh ati-driver-installer-11-5-x86.x86_64.run --buildpkg Debian/testing

# sh ati-driver-installer-11-5-x86.x86_64.run --buildpkg Debian/testing
Created directory fglrx-install.7aYYig
Verifying archive integrity... All good.
Uncompressing ATI Catalyst(TM) Proprietary Driver-

[Code]...

View 12 Replies View Related

Debian Configuration :: ATI Radeon Xpress 1100 Driver In Squeeze?

Mar 4, 2011

Alright, Lenny has a working "fglrx-driver" package for my laptop, but Squeeze does not. Would it be possible to install the one from Lenny on Squeeze since Squeeze has newer libraries and such? I know I can't install new stuff with older libraries, but can I install the old stuff with newer libraries? I am at the end of my rope here! I mean ATI sucks and we all know this, but I've always found a Linux/open-source alternative that worked, until Squeeze.

View 10 Replies View Related

Debian Configuration :: Wheezy Radeon / Intel Graphics Switcheroo?

Apr 16, 2011

I have an Acer Aspire TimelineX 4820TG. I'm running Wheezy and I can't seem to get switcheroo working correctly. I was running Squeeze, then upgraded to Wheezy because it had a kernel over 2.6.33 with switcheroo built in. Below is the layout of my build...

(~)$ uname -a
Linux skipjack-debian 2.6.38-2-686 #1 SMP Thu Apr 7 05:24:21 UTC 2011 i686 GNU/Linux
(~)$ lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18)
01:00.0 VGA compatible controller: ATI Technologies Inc Redwood [Radeon HD 5600 Series]

[code]....

View 5 Replies View Related

Debian Hardware :: ATI R7 Graphics Card - Open Source Radeon Or Fglrx Catalyst?

Jul 11, 2014

I've set up this new PC, the graphic card I picked is the ATI R7 260X, pretty good card with lots of core processors, high clock and 2GB memory. I'm now currently using the 14.4 catalyst drive, it works actually alright, though, there are some mishaps with this driver:

First my hdmi screen had scale down, leaving black borders around, even though the catalyst control said the correct native resolution, this turned out to be a underscan that fglrx does and I've finally managed to fix it. Other caveat is that the screen simply won't suspend or turn off( via software), DPMS actually works, forcing it turns the screen blank for some seconds but something does not allow the screen to sleep.

Performance wise it seems pretty good though, everything is pretty smooth, being able to play games maxed out on resolution and ultra settings, though, I still haven't tested out that many games.

The open-source radeon on the other hand, well its open-source, fully xorg and linux compatible, which is a major plus point. It seem it has come a long way, supporting lot of features and providing better performance in some cases.

Before installing Catalyst I had issues with mesa and steam, steam would complain about not finding the 32bit libraries, this is however a steam runtime issue, maybe it could already be fixed.

View 1 Replies View Related

Debian Configuration :: ATI Mobility Radeon HD5470 Non-free Driver Installation?

Jun 6, 2011

1- I'm trying to install the ATI Mobility Radeon HD5470 driver over the non-free repository ...the problem is that until now i didn't found a recent documentation ...and to be honest i don't know which procedure should i use to rightly install the driver .

2- I have two graphic cards (integrated Intel with the i5 processor), and i can't change the default one to the ati! because debian had set the intel card as a native one...! that's why i m wondering if just an installation of the non-free drivers will solve this or not! I think every body will ask me how the lspci output looks like so here is it : 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)

[Code]...

View 8 Replies View Related

Debian Configuration :: Squeeze: Suspend/hibernate Resume Fails With Radeon Graphics

Aug 6, 2010

I am running Squeeze on an older Compaq EVO laptop with radeon graphics.

A few months ago, after an upgrade, suspend and hibernate stopped working. The suspend or hibernate worked fine, but the resume just hung with a black screen. I finally got around to looking into it and found a workaround.

The workaround is to disable Kernel Mode Setting for the radeon. This can be done by adding the boot parameter "radeon.modeset=0" or by editing /etc/modprobe.d/radeon-kms.conf so that it includes the line "options radeon modeset=0".

If you are interested in the details, you can search for problem reports related to radeon kernel mode setting.

View 3 Replies View Related

Debian Configuration :: Fstab Configuration - Failed To Open /proc/filesystems: No Such File Or Directory

Aug 23, 2011

I have some errors when run the mount -all command: mount: wrong fs type, bad option, bad superblock on /dev/sdc5, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so Failed to open /proc/filesystems: No such file or directory

[Code]..

View 14 Replies View Related

Debian Configuration :: Openoffice.org Base Crashes?

Jun 22, 2010

I am trying to start OpenOffice Base (3.2.0) but it keeps crashing once I begin to edit a new data base. Calc, Writer and Impress work fine.

ramack@ramack2:~$ soffice -base
ramack@ramack2:~$ libgcj failure: gcj linkage error.
Incorrect library ABI version detected. Aborting.

I haven't a clue as to how to fix this one. A web search finds a Debian bug that a couple years+ old. The bug has since been resolved. It crashes if run as root too

View 2 Replies View Related

Debian Configuration :: Next CPU Crashes HP360G6 Server

Aug 21, 2011

I am using HP DL360G6 server as mysql and apache server.

System is 64bit debian

uname -a
Linux xxxx 2.6.27.7 #6 SMP Thu Aug 27 13:32:30 CEST 2009 x86_64 GNU/Linux
head -n1 /etc/issue
Debian GNU/Linux 4.0
l
grep "model name" /proc/cpuinfo
model name : Intel(R) Xeon(R) CPU E5504 @ 2.00GHz
model name : Intel(R) Xeon(R) CPU E5504 @ 2.00GHz

[Code].....

View 1 Replies View Related

Debian Configuration :: Virtualbox Crashes When Fullscreen Is Activated

Sep 22, 2015

I have installed installed Debian 9 (stretch/unstable) which has GNOME 3.16.3 and runs Linux kernel 4.1.0-2 by default in Virtualbox 5.0. The host OS is Windows 8.1 On each instance of activating full screen mode in the VM, a freeze occurs then an abrupt close (abort).

I am inclined to believe that this problem resides in the OS (Debian 9) rather than Virtualbox or the Host. The reason being is that prior to installing Debian 9 (today) I had Jessie installed for quite some time where this error/issue never surfaced.

This issue is rather complicated in the sense that if alternating between full screen and normal mode quickly, this occurs whereas, if done every 10 seconds or thereabout it happens almost seamlessly. Also, if 3DAcceleration is switched off that doesn't occur.

How do I find the root of this problem and a resolution to it?

Virtualbox Log File: [URL] .....

View 8 Replies View Related

Debian Configuration :: Iceweasel 5 Crashes When Opening File

Aug 19, 2011

A recent update to Iceweasel 5 (version 5.0-6 ) on my debian (Linux xxxxx 3.0.0-1-amd64 #1 SMP Sun Jul 24 02:24:44 UTC 2011 x86_64 GNU/Linux) led to a rather odd an annoying behavior. Each time I try to open an external file (pdf, odt) or to save a file on the hard drive, then Iceweasel crashes systematically. Does anyone experience the same? Any idea of how to fix this?

View 5 Replies View Related

Debian Configuration :: Multiple Partition Setups Other Than Resistance To Data Loss In Crashes?

Feb 25, 2010

What are the advantages of the multiple partition setups other than resistance to data loss in crashes? Is there any other reason to have a special partition just for your boot directory (kernel files and config) than surviving a major crash?

Also, is it possible to make the Debian installer accept an existing set of partitions? Or even alter the size of the automatically created partitions? Does expert mode let you control the partitions? How many other very detailed things would I have to know to use expert mode, though?

View 6 Replies View Related

Debian Configuration :: Radeon DRI Driver, Clicking "Apply" It Fails?

Mar 3, 2011

i couldn't get out after many hours of reading documents/posts/forums etc.

The issue:In Kde 4.4.5, using xorg and radeon opensource driver, i can't set OpenGL for desktop effects. Clicking "Apply" it fails. OpenGL seems corrupted someway. I have to stay on XRender. This is the glxinfo output:

glxinfo | grep OpenGL
OpenGL vendor string: Mesa Project
OpenGL renderer string: Software Rasterizer
OpenGL version string: 2.1 Mesa 7.7.1
OpenGL shading language version string: 1.20
OpenGL extensions:

The story:i was running previously kde with nvidia propertary driver and a nvidia board. Then i removed the board for a fault and put a sapphire radeon HD5450. Initially i set up propertary radeon fglrx. At the end, i decided to use the opensource drivers, removed in the best way all fglrx files and links. So i then followed the wiki for reinstall open source radeon drivers, did it many times, also reinstalling xorg with purge, same for libgl1-mesa-xxx etc, but i still cannot use the OpenGL hardware support (should be DRI, that is correctly installed but not loaded).

Seems to be really an opengl corruption, if i disable the check on apply, and select OpenGL rendering, i get a complete blank screen.

Some information of the system:
01:12 ] angelo@angel3 [~] cat /proc/cpuinfo
processor: 0
vendor_id: GenuineIntel
cpu family : 6
code....

View 3 Replies View Related

Hardware :: Blender: Error While Loading Shared Libraries: Libpython2.5.so.1.0: Cannot Open Shared Object File

Mar 16, 2010

I want to run blender in Ubuntu910,but get below

test@ubuntu:~$ blender

blender: error while loading shared libraries: libpython2.5.so.1.0: cannot open shared object file: No such file or directory

View 4 Replies View Related

Software :: Installed Radeon HD 5550 Card - Now Festival Speech Crashes

Aug 10, 2010

Debian testing: $ uname -a Linux jilldando 2.6.32-trunk-486 #1 Sun Jan 10 05:53:18 UTC 2010 i686 GNU/Linux Today I upgraded my PC with a Radeon HD 5550 video card, it has HDMI o/p with sound on it. After boot up I get get the usual sounds from the mother boards onboard intel sound card EXCEPT speech. Initially I thought it would just be that alsa might be piping synth usuage to the Radeon card so I edited the alsa-base.conf file. So I added the following to /etc/modprobe.d/alsa-base.conf alias snd-card-4 snd_hda_intel

and changed: options snd_hda_intel index=0 to: options snd_hda_intel index=0,4 and rebooted, but this made no difference. Still startup sounds and sounds etc but no speech. I used the alsa project to check and these are the results: Code:

[Code]....

View 1 Replies View Related

Debian Multimedia :: Blender Won't Start / Get It To Work?

Jul 5, 2010

I have recently install Blender on my system (squeeze, 2.6.32-5-amd64, ATI Radeon HD 3100) and when I try and start it I get a segmentation fault. I am using the proprietary driver. When i run glxinfo or glxgears I get a segmentation fault as well which makes me think I have an issue with my hardware acceleration.

I am really suck when it comes to trying to diagnose the problem any further and would appreciate any help you guys have. My system is up to date and Blender has worked before on an almost identical setup (i reinstall debian a while back, may have been using a slightly older kernel then).

View 3 Replies View Related

Debian Configuration :: Can't Open CD Drive

Mar 1, 2011

Is there a way to permanently, completely and utterly disabling the "feature" that stops me from opening my CD drive? I suspect it is the same thing that asks me if I want to play/mount/etc things when I plug them in. I don't - I just want to be allowed to use my computer without silly hindrances and interruptions. What is it that tries to take over my computer in this way?

View 10 Replies View Related

Debian Configuration :: How To Open Ports On Debian?

Jul 19, 2010

I am trying to use thunderbird to connect to gmail. followed the instructions on the gmail help section to set up thunderbird and opened ports 995 for pop and 465 smtp on my router. When that did not work I posted on the thunderbird forum. It was decided there I had a problem with debian since both the thunderbird and router settings were right. doing more research I used nmap and netstat to check for open ports and it seems to me I only have tcp 80 and udp 138 open. downloaded firestarter hoping to solve the problem but in the events section it does not show thunderbird trying to connect to any port. Is this a case of not understanding what I am looking for here. Is there some way to open all ports on debian and then using firestarter to block the traffic I do not want.

View 11 Replies View Related

Debian Multimedia :: Blender 2.49 Has Too Slow Response In Squeeze?

Aug 5, 2011

While Blender 2.5 may be stable, the Python API is not. According to the Blender website... Note: The Blender Python API has areas which are still in development. The following areas are subject to change. -operator behavior, names and arguments -mesh creation and editing functions.

View 8 Replies View Related

Debian Hardware :: Launching Blender Makes The Sound Cut Out?

Jun 7, 2010

After becoming somewhat disillusioned with a number of other distro's I decided to turn to debian and I must say I like it! Install was a breeze, I even did my own partitioning instead of letting the installer handle it ... I've since come across one of the same problems that I encountered on all the other distro's I've tried so far.I'm using:

Squeeze 2.6.32-trunk-amd64,
Intel Core2 Quad (Q9550)
Asus Pro Turbo main board,

[code]....

It seems that simply unplugging all USB devices and rebooting was all I needed to do.The other sound issue I have (that also occurs on a number of other distro's) happens when I launch Blender. If I have music playing when blender is launched the sound cuts out. If I kill the music player and restart it the sound is back.Below is my audio controller;

lspci -v | grep -i audio
00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller

View 13 Replies View Related

Debian Configuration :: Firewall Up But Ports Still Open

Sep 9, 2011

I have just switched over from firestart to gufw.I have set all incoming traffic to deny and all outgoing traffic to allow.I have rules set for incoming traffic, and have only opened 1 port on my system for torrents. My router also only has the same port opened which again is for torrents.I use "Network Tools" which is included on squeeze and do a portscan of 192.168.1.100 and 127.0.0.1 I get all kinds of crazy ports coming back as opened. What is even stranger is if I do a few scans, these ports change, so one port on one scan may come up as open, then it will disappear and a different port may show as open.

Mind you none but the torrent port is forwarded in my router, I have no idea what any of these other ports are, or why they are even showing up.What the heck is going on? I dont think this is normal? Am I at any higher risk for attack?

View 1 Replies View Related

Debian Configuration :: Open Read And Close USB Medium

Nov 2, 2015

Where is now, in new Debian systems, the internal text file where the

adequate medium (live systems recognize a medium /dev/sdb1 if I connect my phone tablet)

has to be present if used?

Is a special procedure to be use to mount, open, read, close and unmount them properly?

View 1 Replies View Related

Debian Configuration :: Installing ATI Open Source Drivers

Mar 1, 2016

I just set up a computer with debian (im no linux expert) and now i have trouble with getting the packages for my graphics card (its an RV635)

Im tried to do it like this page says: [URL]....

However when i try to Code: Select allapt-get update he throws an error:

W: Fehlschlag beim Holen von http://httpredir.debian.org/debian/dists/jessie/Release Erwarteter Eintrag »nonfree/binary-amd64/Packages« konnte in Release-Datei nicht gefunden werden (falscher Eintrag in sources.list oder missgebildete Datei)

View 1 Replies View Related

Debian Configuration :: Xorg : Unable To Open /dev/agpgart

Nov 17, 2010

I'm trying to get my Intel HM55 GMA HD graphics card to work in Debian Lenny.As the vanilla Xorg didn't have any support for it, I manually compiled the last stable Xorg source (1.7.1 - such a pain) and the Intel driver. But when I try to launch X, I get the following message :

(EE) GARTInit: Unable to open /dev/agpgart (No such file or directory)
(EE) intel(0) : /dev/agpgart is either not available, or no memory is available for allocation. Please enable agpgart.

View 2 Replies View Related

Debian Configuration :: When Open A Web Browser - Can't Resolve The Host Name

Mar 29, 2011

I've just installed Debian Squeeze from a live CD. When I open a web browser (be it iceweasel or epiphany) and try to go to google.com, it tells me it can't resolve the host name. [Edit: They do, however, allow me to go anywhere on debian.org, minus the search feature] I also get the same error when I try to go to my website running on a local server. However, when I type the server's IP address (192.168.0.10), it goes to the website fine. Basically, any program I run that needs to resolve a host name returns an error, with the exception of the host command:

I've tried changing my DNS server IP from 192.168.0.1 (my router, configured to provide DNS) to 192.168.1.254 (my internet modem, also configured to provide DNS). That didn't help any. Then I changed my DNS server IP to the same one used by the modem, and now everything works.

I've tried googling my way out of the issue, and I've found where someone had the same issue as I've got and fixed it by adding "blacklist ipv6" to their /etc/modprobe.d/blacklist.conf file, but that didn't work for me.

So, recap: Why does resolving domain names fail for certain applications (except the "host" program) when the DNS server IP is that of my router or modem (which works fine for all of my other computers), but suddenly works when I point the computer straight to my ISP's DNS servers, and how can I permanently fix the problem?

View 4 Replies View Related

Debian Configuration :: Open Source Broadcom Solution?

May 12, 2011

I have a Broadcom BCM4312 LP-PHY in this machine. I was informed theres an open source driver for broadcom cards (brcm80211), but it doesn't seem to support this chipset. In the spirit of Debian, is there another driver available?

View 2 Replies View Related

Debian Configuration :: Install Open Connect On Server Machine

Sep 23, 2015

I'm trying to install the openconnect VPN client on a server machine, Debian 7 Wheezy, and APT is trying to install a lot of dependencies. I think it's trying to install the whole desktop environment.I was searching the web but all articles are for desktop machines and nobody mentions my problem with the dependencies. I also have openconnect installed in two Gnome desktop machines without problems.

This is the output:

Code: Select all# apt-get install openconnect
Reading package lists... Done
Building dependency tree       
Reading state information... Done

[code]...

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved